SuperServer 6028U-TR4+ (Complete System Only)

Contact Us
Support
Downloads
Search
Online Support
Reseller Resource Center
Product Manuals
RMA
archive
SuperServer 6028U-TR4+ (Complete System Only)
Products
Systems
2U
[ 6028U-TR4+ ]
Integrated Board
Key Features
• Flexible Connectivity Options
1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s
Super X10DRU-i+
2. Up to 1.5TB ECC, up to DDR4 2133MHz;
24x DIMM sockets
3. 1x PCI-E 3.0 x16 slot (FH, 10.5" L),
7x PCI-E 3.0 x8 slots (5x FH, 10.5" L,
1x LP, 1x Internal LP)
4. 4x Gigabit Ethernet ports
Due to the complexity of integration, this product is sold as completely
assembled systems only (including but not limited to CPUs, memory, and
HDDs). Please contact your Supermicro sales rep for special requirements.
5. 12x Hot-swap 3.5" Drive Bays:
10x SATA3 ports by default;
Optional drive support: 12x SAS3
6. 4x heavy duty fans w/ optimal
fan speed control
Drivers & Utilities
BIOS
IPMI
Tested Memory Tested HDD
Manuals
OS Certification Matrix
AOC Compatibility List
Product SKUs
SYS-6028UTR4+
7. 1000W High efficiency (96%)
Redundant PSU; Titanium Level
Chassis
SuperServer 6028U-TR4+ (Black)
Motherboard
Form Factor
2U Rackmount
Model
CSE-829UAC-R1K02
Dimensions and Weight
Super X10DRU-i+
Processor/Cache
CPU
Intel® Xeon® processor E5-2600 v3
family (up to 160W TDP **)
Dual Socket R3 (LGA 2011)
Cores /
Cache
Up to 18 Cores / Up to 45MB Cache
System Bus
QPI up to 9.6 GT/s
Note
** Please contact your Supermicro sales
representative for additional details.
System Memory
Memory
Capacity
24x 288-pin DDR4 DIMM sockets
Up to 1.5TB ECC LRDIMM, 768GB ECC
RDIMM
Memory
Type
2133/1866/1600MHz ECC DDR4 SDRAM
72-bit
DIMM Sizes
RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
Memory
Voltage
1.2 V
Error
Detection
Corrects single-bit errors
Width
17.2" (437mm)
Height
3.5" (89mm)
Depth
25.5" (647mm)
Gross
Weight
36 lbs (16.4kg)
Available
Colors
Black
Front Panel
Buttons
Power On/Off button
System Reset button
LEDs
Power status LED
HDD activity LED
2x Network activity LEDs
System information (overheat/UID) LED
Expansion Slots
1x PCI-E 3.0 x16 slot (FH, 10.5" L)
7x PCI-E 3.0 x8 slots
(5x FH, 10.5" L, 1x LP, 1x Internal LP)
PCI-Express
(Both CPUs need to be installed for full
access to PCI-E slots and onboard
controllers. See manual block diagram
and AOC Support for details.)
Drive Bays
On-Board Devices
Chipset
Intel® C612 Express chipset
SATA
SATA3 (6Gbps) with RAID 0, 1, 5, 10
Support for Intelligent Platform Management
12x Hot-swap 3.5" Drive Bays:
10x SATA3 ports by default
Optional drive support: 12x SAS3
Hot-swap
IPMI
Interface v.2.0
IPMI 2.0 with virtual media over LAN and
KVM-over-LAN support
ASPEED AST2400 BMC
Network
Connectivity
4x Gigabit Ethernet ports via AOC-2UR68i4G
Graphics
ASPEED AST2400 BMC
Note: optional storage card is required to
support more than 10 drives.
Backplane
2U SAS/SATA backplane
System Cooling
Input / Output
SATA
10x SATA3 (6Gbps) ports
SAS
12x SAS3 ports support via optional Add-on
Card
LAN
4x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
5x USB 3.0 ports
(2 rear, 2 onboard header, 1 Type A)
Video
1x VGA Connector
Serial Port /
Header
1x Serial header
DOM
2x SuperDOM (Disk on Module) ports
Fans
4x 8cm heavy duty PWM fans
Power Supply with Digital Switching Control
1000W Titanium Level (96%) High-efficiency Redundant Single
Output Power Supplies
AC Input
100-127 V, 50-60 Hz
200-240 V, 50-60 Hz
+12V
Max: 62.5A & Min: 0A (100Vac-127Vac)
Max: 83A (200Vac-240Vac)
12V SB
Max: 2.1A
Titanium Level
[ Test Report ]
Certification
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS
Features
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V,
+5V, +12V, +3.3V Standby, +5V Standby,
VBAT, Memory Voltages.
5+1 Phase-switching voltage regulator
FAN
8x 4-pin fan headers
Status monitor for speed control
Pulse Width Modulated (PWM) fan
connectors
Temperature
Support to monitor Supermicro AOC
temperatures from IPMI or SD 5
Monitoring for CPU and chassis
environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED
Memory DIMM ECC error LEDs
CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other
Features
4x 8-pin GPU power connectors
Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS
Management
Software
SuperDoctor® 5
Intel® Node Manager 3.0
Watch Dog
NMI
SMCBU and SMM
Optional IPMI 1.5 / 2.0
Power
Configurations
ACPI Power Management
Power-on mode for AC power recovery
Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental
Spec.
Operating Temperature:
5°C to 40°C (41°F to 104°F)
Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
See Parts List
Terms & Conditions | Privacy | Investor Relations | Jobs | Site Map
SuperServer® | Motherboard | Chassis | Rack Cabinet | SuperBlade® | Embedded | Networking | Storage | Accessories | AMD Solution | Power
Supplies
Copyright © 2014 Super Micro Computer, Inc.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.