SVG200SP+ Quick Start Guide

SVG200SP+ SIP/IAX ATA Quick Start Guide
SVG200SP+ Quick Start Guide
Installation and access: .................................................................................................. 2
Configure SVG200SP+ to make VoIP calls ...................................................................... 3
WAN Config .................................................................................................................... 3
SIP Config ....................................................................................................................... 4
IAXConfig ........................................................................................................................ 5
STEPHEN TECHNOLOGIES CO.,LIMITED
ALL RIGHTS RESERVED
陈泽科技有限公司
www.stephen-tele.com
SVG200SP+ SIP/IAX ATA Quick Start Guide
Installation and access:
Installation:
Connected SVG200SP+ as below:
:
Listen SVG200SP+ IP from the handset
----pick up the handset
----enter #*111#;
Then the handset will clue SVG200SP+’s IP address
;
。
Modify your computer’s IP address to the same network as SVG200SP+.
Key in SVG200SP+’s IP address in the web browser and press enter, then you can access SVG200SP+’s web manage interface.
Remember the account is admin/admin for administrator and guest/guest for user.
陈泽科技有限公司
www.stephen-tele.com
SVG200SP+ SIP/IAX ATA Quick Start Guide
Configure SVG200SP+ to make VoIP calls
WAN Config
Enter NetworkWAN Config to set the WAN setting:
SVG200SP+ supports three different IP types: Static IP, Dynamic obtain IP (DHCP) and PPPoE. You can use either of these IP
types to connect the internet.
Use Static IP:
----Select “Static”;
----Enter the SVG200SP+’s IP address in the “IP address” field.
----Set the “Netmask”, default 255.255.255.0
----Enter the SVG200SP+’s upper gateway IP address(for example:Router) in the “Gateway” field
----Key in the DNS information in the “Primary DNS” and “Alter DNS” fields.
Use DHCP:
----Select DHCP
If you have a DHCP server in your network, SVG200SP+ will automatically obtain the network information from your DHCP
server.
Use PPPoE:
----Select PPPoE
----Type your PPPoE dialup information in the PPPoE setting fields:PPPoE server(option), Username and password.
Then the SVG200SP+ will connect to the internet through PPPoE , and automatically obtain the
IP address , Netmask,
Gateway, Primary DNS and Alter DNS information.
则
陈泽科技有限公司
www.stephen-tele.com
SVG200SP+ SIP/IAX ATA Quick Start Guide
SIP Config
Enter VoIP SIP Config setting page and set the sip information
----Register Server Addr : sip server address;
----Register Server Port
: sip serverre register port;
----Register Username : username of your sip account;
----Register Password : password of your sip account;
----Register Number : Phone number of your sip account; the same as username if none
----check Enable Register
Then you can make VoIP calls if the WAN and SIP config is correct.
;
Notice: Please go to the “Config Manage” and save the config, otherwise you will lose the setting after device reboot.
陈泽科技有限公司
www.stephen-tele.com
SVG200SP+ SIP/IAX ATA Quick Start Guide
IAX Config
-----IAX Server Addr: IAX server address;
-----IAX Server Port:
IAX server register port;
-----Account Name:
username of your IAX account;
-----Account Password: Password of your IAX account.
-----Local port:
Signal port of local,default port is 4569
-----Phone Number:
Phone number of your IAX account; the same as username if none
-----Enable Register: enable or disable register
-----IAX(Default Protocol): If you want to use IAX account to call ,please select IAX(Default Protocol), if not the system will
choose SIP as default
Then you can make VoIP calls if the WAN and IAX config is correct.
Notice: Please go to the “Config Manage” and save the config, otherwise you will lose the setting after device reboot.
陈泽科技有限公司
www.stephen-tele.com
Download PDF
Similar pages
AT-530P Quick Start Guide
AG-188 Quick Start Guide
AT-640P Quick Start Guide
Usage
login August 06 Volume 32
TalkMobile user manual for iPhone
SIP Trunk Product detail for sales
Interaction SIP Station® II