BC2100XL wood chipper brochure

BC2100XL
BRUSH CHIPPER
OPTIONAL PATENT-PENDING WINCH.
SMARTCRUSH. Once the upper feed roller
freely raises for four seconds, it will automatically
increase down pressure on the material being
fed. This allows the upper feed roller to
easily climb onto large forked material before
the increased down pressure is applied for
maximum pulling force.
LOWER FEED ROLLER. The lower feed roller is
offset from the upper feed roller by 11" (27.9 cm).
Material is easily pulled to the upper feed roller, so
there is less need to manually raise the upper feed
roller for larger diameter material.
SMARTFEED. This patented system helps
OPTIONAL REMOTE CONTROL. Operate one
POWERFUL PERFORMANCE.
increase operator productivity while reducing
strain on vital engine parts. The feedsensing
control system monitors engine rpm and
automatically stops and reverses the feed roller
when feeding larger, hardwood material.
machine to load while still maintaining control of
the chipper. The remote control operates forward,
reverse and stop functions of the feed rollers,
restarting the feed rollers, engine throttle, engine
stop, crush boost for the upper feed roller and
hydraulic discharge chute positions (if equipped).
A 275 hp (205.1 kW) Tier 3 or Tier 4i (Stage IIIB)
engine allows you to not only meet emission
requirements but also enough horsepower to meet
your jobsite needs.
Eliminates the need to drag large material to the
chipper. The 150’ (45.7 m) winch line can handle
material up to 4000 lb (1814.9 kg), making it easy
to lift logs directly onto the feed table. In addition
the winch can also be hydraulically raised out of
the way to allow operators to feed the unit using
a loader.
VERMEER.COM
BC2100XL BRUSH CHIPPER
ENGINE OPTION 1
CHASSIS
Weight (with outriggers) engine: 15,000 lb (6803.9 kg)
Frame: C channel, 2.5" x 4.5" x .038" (6.3 cm x 11.4 cm x 0.1 cm)
Weight (without outriggers) engine: 14,700 lb (6667.8 kg)
Tires: 235 / 75R17.5 load range J Axle/Suspension: Dexter tandem torsion
Weight (without outriggers and winch) engine: 16,380 lb (7429.8 kg)
Hitch: 3" (7.6 cm) pintle
Operational length (tongue extended): 259.2" (660 cm)
Width: 95.8" (243.2 cm)
CUTTING SYSTEM
Height (standard chute): 116.5" (295.9 cm)
Drum system: Spherical roller bearings
Height (adjustable chute minimum): 110" (279.4 cm)
Drum speed: 1,084 rpm
Height (adjustable chute maximum): 135.6" (344.4 cm)
Drum-size opening: 21.5" x 28" (54.6 cm x 71.1 cm)
Make and model: Tier 3 Cummins QSB 6.7L
Knives: 4 knives
Horsepower: 275 hp (205.1 kW): 730 ft-lb (990 Nm)
Fuel type: Low Sulfur Diesel
Number of cylinders: 6
Cooling medium: Liquid
ENGINE OPTION 2
Weight (with outriggers) engine: 15,500 lb (7030.7 kg)
Weight (without outriggers) engine: 15,200 lb (6894.6 kg)
Weight (without outriggers and winch) engine: 16,830 lb (7634 kg)
Operational length (tongue extended): 259.2" (660 cm)
Width: 95.8" (243.2 cm)
Height (standard chute): 116.5" (295.9 cm)
Height (adjustable chute minimum): 110" (279.4 cm)
Height (adjustable chute maximum): 135.6" (344.4 cm)
Make and model: Tier 4i (Stage IIIB) Cummins QSB 6.7L
Horsepower: 275 hp (205.1 kW): 730 ft-lb (990 Nm)
FEED / DISCHARGE SYSTEM
Chipping capacity: 21" (53.3 cm)
Feed table height: 39" (99 cm)
Feed table length: 60.5" (153.7 cm)
Feed table width: 72" (182.9 cm)
Max feed speed: 100 fpm (30.5 m/min)
Number of feed rollers: 2 horizontal
Discharge height: 116.5" (295 .9 cm)
Discharge chute rotation: 270°
OPTIONS
Adjustable height discharge chute
Remote control
Hydraulic outriggers
Hydraulic winch
Fuel type: Ultra Low Sulfur Diesel
WARRANTY
Number of cylinders: 6
Cooling medium: Liquid
The 3-year/3,000-hour extended limited warranty on drum housings, cutter drums, shaft, and ring feeder hubs offers you peace of mind.
ELECTRICAL
1-year/1,000-hour Vermeer equipment limited warranty.
System voltage: 12 V DC
CAPACITIES
Fuel tank: 65 gal (246.1 L)
Hydraulic tank: 24 gal (90.9 L)
Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation.
Equipment shown is for illustrative purposes only and may display optional accessories or components. Please contact your local Vermeer dealer for more information on machine specifications.
Vermeer, the Vermeer logo and Equipped to Do More. are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. © 2013 Vermeer Corporation. All rights reserved.
Printed in the U.S.A. Please recycle.
PN 180007868