|
TekSet
Rental S.r.l.
via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSET.IT
MACCHINA FUMO
|
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSETRENTAL.IT
|
RENT: MACCHINA FUMO
|
|
Informazioni
FUMO BASSO
|
Antari DNG-200 Low Fog Generator
(NON richiede l’uso di C02 o ghiaccio secco)
Dimensioni:
78 x 60,8 x 68,6 cm
Doppia alimentazione:
1- Compressore 230 V
2- Fog Generator 230 V
600 W
2.500 W
Tempo di riscaldamento:
12 min. (prima accensione)
Segnale di controllo:
Standard DMX 512 - 1 Ch
Capacità serbatoio:
10 litri
Consumo di liquido:
11 min. / 1 litro
Peso:
120 kg
Accessorio in dotazione:
Tubo di trasporto da 3 m
TekSet
Rental S.r.l.
via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSET.IT
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSETRENTAL.IT
|
RENT: MACCHINA FUMO
|
|
TekSet
Rental S.r.l.
via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSET.IT
FUMO BASSO
|
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSETRENTAL.IT
|
RENT: MACCHINA FUMO
|
|
FUMO BASSO
|
DNG-200 User Manual
DNG-200 Low Fog Generator
User Manual
MODE D'EMPLOI
BEDIENUNGSANLEITUNG
User Manual
中文說明書
Antari DNG-200 Low Fog Generator
01
Congratulations on the purchase of your new
ANTARI DNG-200 Low Fog Generator
Thank you for choosing the Antari DNG-200 Low Fog Generator! The machine has some
terrific new features on top of the fog cooling provided by the DNG-100 originally. The fog
generator is integrated into this new machine to make sure the machine will not take too
much space in order to maximize the usage of the entire stage.
Different from others, Antari's fog machines do not use carbon dioxide, and do not pollute
environment and and are not harmful for human health. The DNG-200 is a great machine
that offers low fog special effects as well as environmental-friendly features, a true green
machine.
Please follow these operation, safety and maintenance instructions to ensure a long and
safe life for your low fog machine.
Pay attention to all warning labels and instructions printed on the exterior of
-Safety Instructions
English ‧ Français ‧ Deutsch ‧ 中 文
© 2014 Antari Lighting and Effects Ltd.
TekSet
Rental S.r.l.
via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSET.IT
Keep this device dry.
For indoor use only. Not designed for outdoor use.
The ideal operating temperature is between 10° and 30° Celsius.
Two sets of professional power cords are used by this machine. It is important to confirm
the electrical voltage before plugging the power cord into the power outlet. Use a threeplug grounded power outlet.
If the machine is moved or transported, it shall be stationed for one hour to allow the
coolant in the cooler to stabilize before using it again.
If the machine is moved horizontally, please station it for 5 minutes before starting the
operation again.
Please unplug the power cord or turn off the machine if it is not in use.
This machine is not water-proof. If moisture, water, or fog fluid gets inside the housing,
immediately unplug the unit and clean it. If the machine cannot be cleaned, please
contact a service technician or your Antari dealer before using it again.
No user serviceable parts inside. Refer to your Antari dealer or other qualified service
personnel.
For adult use only. The fog machine must be installed out of the reach of children. Never
leave the unit running unattended.
Operate the machine in a well-ventilated area. Never cover the unit's vents. The fog
machine is best installed 1 meter away from all objects.
It is important to place the machine on a flat surface instead of a surface with slope to
prevent any moving of the machine.
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSETRENTAL.IT
|
RENT: MACCHINA FUMO
|
English
-Introduction
|
|
Connect the machine with the black fog conducting hose; it is a three-meter pipe. The
length of the pipe can be adjusted to fit the actual need. (refer to figure 4)
Fill Antari FLR light fog fluid to the tank, tighten the tank cap. (refer to figure 5)
-Unpacking and Inspection
Open the shipping carton and verify that all equipment necessary to operate the system
has arrived intact. The shipping carton should contain the following items:
.
Figure 4
Figure 5
-Operation
-Setup
The wheels at the bottom of the DNG-200 help to move the machine; wheel fixing
mechanisms are located at the diagonal line. Position the machine at a spot, press
down the fixing mechanism to prevent it from moving. To move the machine, press the
opposite side of the fixing mechanism to release it. Please note that the machine is not
allowed to place on a slope due to its big size. (refer to figure 1)
Connect the power cord to a grounded outlet, press down two sets of power switches
located at the back side of the machine. Please press the power switch of the
compressor below first and then the power switch of the fog machine. The warm-up
process is started. The LCD screen on the D-20 controller will show "Warming up”.
While the unit is warming up, fog output will not be possible yet. Please wait till the LCD
screen shows "Ready To Fog".
Program the necessary menu settings with the control panel of the D-20 controller.
(refer to chapter D-20 controller).
The DNG-200 is equipped with a DMX512 system. 3-pin and 5-pin DMX connectors
each are located at the back panel of the machine for optional use. (refer to chapter
DMX512 settings)
When operating the machine for the first time, wait until the controller's LCD screen
shows "Ready To Fog”. Actuate the button Manual for a few seconds to initiate fog
output from the machine. Thus the air in the liquid pipe is drained out. Once the fog
comes out smoothly, the D-20 controller can be set. If the machine is used infrequently,
please follow this procedure every time it is used to drain out the air.
The heater average temperature of the DNG-200 is 220°C.
-D-20 LCD Screen Controller
Figure 1
Please aim the key on the PowerCon terminal of the power cord to the slot of the
connector on the machine, plug it in and turn it about 10° clockwise until the power cord
is completely fixed. The upper power cord is for the fog generator and the bottom one is
for the compressor. (refer to figure 2 and 3)
The D-20 controller is equipped with a 2-meter line, a 5-pin XLR connector, and an LCD
screen displaying all operation statuses of the fog machine. The interface allows the
operator to customize fog machine functions by adjusting the fogging duration, interval,
and volume as well as the DMX address. There are six buttons on the control board. All
current operating parameters are automatically stored in non-volatile memory, allowing
the machine to be powered down without losing function settings.
-Configuration of the buttons
1.
Interval Set
Duration Set
Volume Out
FUNCTION
TIMER
Figure 2
TekSet
Rental S.r.l.
VOLUME
MANUAL
Nonstop Burst
High Volume
Medium Volume
Low Volume
UP and DOWN
TIMER
TIMER
4.
VOLUME
VOLUME
5.
MANUAL
MANUAL
DMX 512 Add
Figure 3
via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSET.IT
2.
3.
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSETRENTAL.IT
|
RENT: MACCHINA FUMO
|
English
English
DNG-200 Low Fog Generator
D-20 LCD controller (preinstalled in the machine)
Two power cords for connecting to Neutrik PowerCon connectors.
3 m fog conducting hose
User's manual (item 3-5 placed in the storage box on the top of the machine)
Water collection tray (preinstalled in the machine)
3 m PU tube, 6 mm Ø
03
02
1
2
3
4
5
6
7
DNG-200 User Manual
DNG-200 User Manual
If your Antari DNG-200 Low Fog Generator fails to work properly, please turn off the
power for five minutes and turn it on again. If the problem still exists, contact your Antari
dealer for service.
Always allow the machine to cool down before attempting to clean or service it.
Please use Antari FLR Light Fog Fluid only. Please do not fill in any other fluid into the
tank to ensure the quality of the fog and the life of the machine.
FUMO BASSO
|
-Menu settings with the button FUNCTION
FUMO BASSO
|
-Setting time intervals for timer operation
Press the button FUNCTION until the display indicates "Interval Set”. Use the
buttons UP and DOWN to adjust the intervals between the individual fog outputs in
timer mode within the range of 10 and 300 seconds.
-Setting the output duration for timer operation
Press the button FUNCTION until the display indicates "Duration Set”. Use the
buttons UP and DOWN to adjust the duration of the fog outputs in timer mode within
the range of 10 and 100 seconds.
A water collection tray is equipped at the rear of DNG-200. When the compressor is
running for condensed fog, some water drops will flow into the tray. Please check the
water level of the tray routinely and drain it on time to prevent overflow. (refer to figure 6).
If the machine is to be used for a long time or the water drops cannot be checked
momentarily, the water collection tray can be removed and a 6 mm PU hose can be
connected to the water draining hole located at the top of the water collection tank to
directly drain out the water drops. After completing the draining, push up the upper red
button to remove the hose. (refer to figure 7)
05
04
English
English
-Setting the fog output volume
Press the button FUNCTION until the display indicates "Volume Out”. Use the
buttons UP and DOWN to select one of four default settings for the fog output volume:
.
• Nonstop Burst -- The machine will continuously produce low fog. The output volume
is automatically adjusted by the machine based on the operating temperature.
• High Volume -- about 60 % output volume
• Medium Volume -- about 52 % output volume
• Low Volume -- about 35 % output volume
Output volume
Nonstop Burst
High Volume
Medium Volume
Low Volume
Output duration
Continuous output*
1 minute
2 Minute
Continuous output*
Pause between fog ouputs
-1 minute
1 minute
--
* When set to "Nonstop Burst" or "Low Volume", the machine will continuously produce low fog.
However, the setting "Nonstop Burst" will produce the higher output volume.
* Please suspend the operation for 5 minutes before switching from the setting "Nonstop Burst" to the
setting "High Volume" or "Medium Volume".
-Setting the DMX512 address
Press the button FUNCTION until the display indicates "DMX 512 Add." Use the
buttons UP and DOWN, to set the machine to the same address as on your DMX
controller. Please refer to the chapter DMX512 settings for more information on
DMX operation.
-Timer operation
In the time mode, the machine will automatically emit fog. The time intervals, duration,
and fog volume depend on the corresponding menu settings. Press the button TIMER, to
activate the timer mode. The display indicates the set time interval. The unit counts down
to 0 seconds and emits fog. To deactivate the timer mode, press the button TIMER again.
-Continuous operation
Press the button VOLUME, to activate continuous fog output. The display indicates the
value that was set in menu item "Volume Out” i.e. Nonstop Burst, High, Medium or Low. To
stop the fog output, press the button VOLUME once again.
-Manual operation
For immediate fog output at the maximum volume of fog, keep the button MANUAL
pressed. The display indicates "Manual Output". As soon as you release the button, the
fog output will stop. The manual operation will take priority over the continuous operation
and the timer operation. Even if one of these operating modes is activated, the fog
machine will always emit the maximum volume of fog when the button MANUAL is
pressed.
TekSet
Rental S.r.l.
via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSET.IT
DNG-200 User Manual
DNG-200 User Manual
-Important Notes
Figure 6
Figure 7
The DNG-200 is equipped with a pump temperature sensor. When the fog fluid is used
up in the tank, the pump will stop running due to the rising of the temperature. When the
machine temperature drops down, the pump will resume to run. Please check to see if
the fog fluid is sufficient in the fluid tank.
A black square metal mesh is located at the back of the machine. This is the air inlet of
the fan. Please do not block the inlet and clean it routinely to keep the cleanness.
If the fog volume is too low, the machine generates noise during operation or the fog
cannot be smoothly sprayed, please turn off the power immediately and check if the fog
fluid is sufficient, whether the external fuse, controller connection or power supply has
any problem. If none of the above shows any problem, insert the power plug again. If the
machine still cannot normally operate, please check whether the hose connecting to the
fog fluid tank is blocked, and if any fluid is flowing. If the cause cannot be identified,
please do not allow the machine to operate to avoid damage. Turn off the machine
immediately and let it cool down. Please contact an Antari dealer or a designated
service center. Do not disassemble the machine by yourself.
After using the DNG-200 for a long time, there may be residue on the floor which could
be a possible cause of danger. Please note the material of the floor and pay special
attention to the safety of persons walking on it.
The DNG-200 Low Fog Generator does not use dry ice. It is very environmental friendly
and safe. However, the output fog is easily to be blown away by wind. Please pay
-Maintenance of the Machine
Cleaning your fog machine regularly will help reduce costly replacement and repair
charges.
Do not allow the fog fluid to become contaminated. The cap should be on the tank at all
times.
Prior to storing the machine for a longer period, clean it and drain all fog fluid from the
tank. Disconnect and store the fog pipe and power cord. Store the machine and all parts
into the parts tank located at front of the machine. Warm up the machine once a month,
to protect it from moisture.
Store the machine cool and dry.
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSETRENTAL.IT
|
RENT: MACCHINA FUMO
|
|
100~120 V AC, 50~60 Hz
220~240 V AC, 50~60 Hz
Power consumption (compressor)
750 W
600 W
Refrigerant
R-404A, 1.75 lb
R-404A, 1.75 lb
Rated current
6.7 A
3.2 A
Start current
61 A
21 A
2745 BTU/ hr
10 A, 250 V
Heater
1450 W
2500 W
Output
12,000 cu.ft/min. (340 m³/min.)
12,000 cu.ft/min. (340 m³/min.)
First heat-Up time
24 min.
12 min.
192 - 255 = high volume (60 % output)
Fog machine's breaker
15 A, 250V
15 A, 250V
Tank capacity
10 liters
10 liters
Fluid consumption rate
11 min./liter (high output)
11 min./liter (high output)
Remote included
D-20 (timer controller with LCD, 2 m cable)
Accessory included
3 m fog conducting hose
Weight
120 kg
Dimensions (LxWxH)
780 x 608 x 686 (mm)
Liquid used
Antari FLR (Light Fog Liquid) only
1
Additional information
Self contained unit -- no CO²/dry ice required
32 - 126 = low volume (35 % output)
- DMX Connector Pin Assignment
The machine provide 3 or 5 pin XLR connector for DMX connection. Diagram below
indicate pin assignment information
3
2
5
4
3 pin XLR
Pin
1
2
3
TekSet
Rental S.r.l.
3
1
1
2
0 - 31 = off (no fog output)
-Operation Notice
Floor-mount installations (4 wheels)
1
127 - 191 = medium volume (52 % output)
Between the values 0 to 31 the machine does not have sufficient output volume and is off.
Between the values 31 to 126 the machine has a minimal output volume of 35%.
Between the values 127 to 191 the machine has a medium output volume of 52 %.
Between the values 191 to 255 the machine has a maximum output volume of 60 %.
Number of DMX channels
1
English
English
3200 BTU/ hr
15 A, 250 V
07
06
Capacity
Compressor's breaker
The DNG-200 is equipped with a DMX512 system. For connecting a DMX controller, 3-pin
and 5-pin male-female XLR connections are provided at the back of the machine. The
machine uses one control channel for adjusting the output volume. The channel has a
DMX value range of 0 to 255. After connecting a DMX controller, timer functions such as
output duration and interval can be programmed using the DMX controller or the DMX
control software. The machine cannot be controlled via the D-20 control anymore. By
using the DMX protocol, fog machines, lighting effects, and other special effects machines
can be interconnected and easily controlled.
2
3
After operation, please wait 15 minutes before turning off the machine.
Please do not turn the power on and off continuously. There must be at least a oneminute interval between each power on and off.
Operate the machine in a well-ventilated area.
Do not position two or more DNG-200 machines side by side to prevent poor hot air
ventilation.
Do not operate the machine under direct sunlight.
It is strongly suggested not to have the machine produce continuous fog output over 20
minutes. Overtime usage might reduce the efficiency and lifespan of the compressor.
5
4
5 pin XLR
Function
Ground
Data Data +
via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSET.IT
Please save this user manual carefully.
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSETRENTAL.IT
|
RENT: MACCHINA FUMO
DNG-200 User Manual
DNG-200 User Manual
Power
3
|
-DMX512 Settings
-Technical Specifications
2
FUMO BASSO
|