Standard Product Features Optional Accessory Kits

Item #
Model Specified:
CSI Section 11400
G-Series Three Section 115V Storage
Three Section Models, 32" Deep
Equipped with an
easy to use
Stainless Steel
Front & Door(s)
Traulsen’s G-Series product line also includes three section reach-in
storage freezer models designed to operate at 115V. These models are available with either full or half length doors and offer the
convenience of a variety of different door hingings to choose from.
Built with durable exteriors, reliable controls, balanced, efficient
refrigeration systems and a variety of user-friendly features, these
products are the right fit for nearly any application. They are
designed and built to the highest standards, and epitomize the
quality design and construction Traulsen is known for.
Model #
G31000 HalfLeft-Right-Right
G31001 HalfLeft-Left-Right
G31002 HalfRight-Right-Right
G31003 HalfLeft-Left-Left
Model G31010
Standard Product Features
High Quality Stainless Steel Exterior Front and Doors
Corrosion Resistant Anodized Aluminum One-Piece Sides
Durable Anodized Aluminum Interior
Microprocessor Control With LED Temperature Readout
Top-Mounted, Balanced, Self-Contained Refrigeration System
Large High Humidity Evaporator Coil Outside The Food Zone
Load-Sure Guard Protects Against Improper Loading
Full or Half Length Stainless Steel Doors With Locks
Self-Closing Doors With Stay Open Feature At 120 Degrees
Guaranteed For Life Cam-Lift Hinges
Guaranteed For Life Horizontal Work Flow Door Handle
Automatically Activated Incandescent Lights
Damage Resistant Stainless Steel Breaker Caps
Three (3) Adjustable Epoxy Coated Shelves Per Section,
Supported On Shelf Pins (installed at the factory)
Energy Saving Automatic Non-Electric Condensate Evaporator
Magnetic Snap-In EZ-Clean Door Gaskets
Gasket-Protecting Anodized Aluminum Door Liner
Anti-Condensate Door Perimeter Heaters
Thermostatic Expansion Valve Metering Device Provides Quick
Refrigeration Recovery Times
Stainless Steel One-Piece Louver Assembly
9' Cord & Plug Attached
Set of Four (4) 6" High Casters With Locks
Three Year Parts And Labor Warranty
Five Year Compressor Warranty
Optional Accessory Kits
• Additional Epoxy Coated Shelves*
• No. 1 Type Tray Slides* To Accommodate either: (1) 18" x
26" or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
• No. 4 Type Tray Slides* To Accommodate (1) 18" x 26" Sheet
Pans (equips one full section)
• Universal Type Tray Slides* To Accommodate Either (1) 18" x
26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam Table
Pans, Adjustable To 4" O.C.
• Plated Shelves* (for use in lieu of standard shelving)
• EZ-Change Interiors (#1, universals, universal heavy duty tray
slides and shelves)
• 6" High Adjustable Legs (for use in lieu of standard casters)
*Please refer to spec sheet TR35872 for optional accessory kit details.
All optional accessory kits are shipped separately for later installation by others at the jobsite.
Listed by Underwriters Laboratories Inc.,
to U.S. and Canadian safety standards and
Listed by NSF International.
PHONE 1 (800) 825-8220
Chef's Corner
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
Item #
Model Specified:
CSI Section 11400
Construction, Hardware and Insulation
Cabinet exterior front, louver assembly and doors are constructed of 20 gauge
stainless steel. Cabinet sides (including returns), interior and door liners are
constructed of anodized aluminum. The exterior cabinet top, back and bottom are
constructed of heavy gauge aluminized steel. A set of four (4) 6" high casters are
Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal,
glide hinges with stay open feature at 120 degrees. Hinges include a concealed
switch to automatically activate the interior incandescent lighting. Guaranteed for
life, work flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways.
Gasket profile and Santoprene® material simplify cleaning and increase overall gasket
life. Anti condensate heaters are located behind each door opening.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
G31010, G31011, etc.
Net Capacity cu. ft.
69.1 (1958 cu l)
Length Overall in.
765⁄16 (193.8 cm)
Depth - Over Body in.
32 (81.3 cm)
Depth - W/Door Open 90° in.
567⁄8 (144.5 cm)
Depth - Overall in.
35 (88.8 cm)
Clear Door Width in.
211⁄8 (53.6 cm)
Clear Half Door Height in.
271⁄2 (69.9 cm)
Clear Full Door Height in.
575⁄8 (146.3 cm)
Number of shelves
Shelf area sq. ft.1
51.9 (4.82 sq m)
Height - Overall in.
831⁄4 (211.5 cm)
Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-404A
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled,
semi-hermetic compressor, large, high humidity evaporator coil located outside the
food zone and a top mounted non-electric condensate evaporator. A 9' cord and
plug is provided. Standard operating temperature is 0 to -5°F.
The easy to use water resistant microprocessor control system is supplied standard. It ­i ncludes a 3-Digit LED Display, and a Fahrenheit or Celsius Temperature Scale
Display Capability.
Standard interior arrangements include three (3) epoxy coated wire shelves per
section, mounted on shelf pins, installed at the factory. Shelves are full-width, and
do not have any large gaps between them requiring the use of "bridge" or "junior
shelves." Recommended load limit per shelf should not exceed 225 lbs. Warranties
Both a three year parts and labor warranty and a five year compressor warranty (selfcontained models only) are provided standard. ELECTRICAL DATA
Feed Wires with Ground
Full Load Amperes
4100 (3⁄4 HP)
Elevation View
Plan View
CARTON DIMENSIONS Domestic Crated Only
Length - Crated in.
91 (231 cm)
Depth - Crated in.
43 (109.2 cm)
Height - Crated in.
831⁄2 (212.1 cm)
Volume - Crated cu. ft.
189 (5354 cu l)
Net Weight - Uncrated lbs.
690 (313 kg)
Gross Weight - Crated lbs.
870 (395 kg)
NOTE: Figures in parentheses reflect metric equivalents.
1= Figure shown reflects the area of standard shelf compliment plus the additional storage area available on the cabinet
2= Based on a 90 degree F ambient and -20 degree F evaporator. For remote data please refer to spec sheet form TR35837.
3= 12" Top clearance preferred for optimum performance and service access.
Equipped with one NEMA 5-20P Plug
Section View - All Models
Continued product development may necessitate specification changes without notice.
Part No. TR35849 (revised 7/13
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
Chef's Corner
Download PDF
Similar pages
G G-Series Three Section 115V Storage Freezers/Self-Contained Project
G G-Series Three Section 115V Storage Freezers/Self-Contained Project
SW36 12M HGL FB,031815
CGC50 SS,032715
SW36 10,072114