L3 Gigabit Metro Ethernet Switch

L3 Gigabit Metro Ethernet Switch
Product Overview
The Edgecore ECS4660-28F is a standalone L3 Gigabit Metro Ethernet routing switch with 24 1000BASE-X SFP slots, two 10G XFP
uplink slots, and two 10G module slots that can support two additional 10G uplinks. With up 107Mpps performance, the
ECS4660-28F is ideal for service provider aggregation deployment, providing wire-speed L2 switching and L3 unicast and
multicast routing. To maintain high availability, the ECS4660-28F provides redundant power, a hot swappable fan tray,
configuration rollback, and G.8032 ring protection.
Key Features and Benefits
High Availability
L3 Gigabit Metro Ethernet Switch
With IEEE 802.1w Rapid Spanning Tree Protocol, the Edgecore
ECS4660-28F provides a loop-free network with redundant links
to the core network and rapid convergence in less than 2
seconds. IEEE 802.1s Multiple Spanning Tree Protocol allows a
spanning-tree instance per VLAN and Layer 2 load sharing on
redundant links.
The ECS4660-28F supports IEEE 802.3ad Link Aggregation
Control Protocol (LACP). It increases bandwidth by automatically
aggregating several physical links together as a logical trunk
and offers load balancing and fault tolerance for uplink
The ECS4660-28F supports G.8032 Ethernet Ring Protection
Switching, with the ability for the network to detected and
recover from incidents without impacting users, meeting the
most demanding quality and availability requirements. Rapid
recovery time when problems do occur is as low as 50 msec.
Comprehensive QoS
The Edgecore ECS4660-28F offers advance QoS for marking,
classification, and scheduling to deliver best-in-class
performance for data, voice, and video traffic at wire speed.
Eight egress queues per port enable differentiated management
of up to eight traffic types across the stack. Traffic is prioritized
according to 802.1p, DSCP, IP precedence and TCP/UDP port
number to provide optimal performance to real-time applications.
Weight Round Robin (WRR) and strict priority ensure differential
prioritization of packet flows and avoid congestion of ingress and
egress queues.
With bidirectional rate-limiting, per port or per traffic class, the
ECS4660-28F preserves network bandwidth and allows full
control of network resources.
The ECS4660-28F supports Three Color Market and Policing
single rate: Committed Information Rate (CIR) Two Rate: CIR+
Peak Information Rate (PIR) Traffic Policing: Drop or remark the
priority tag of packets exceeds burst size.
Advances Synchronization
The ECS4660-28F provides synchronization options optimized
for cellular operators looking to backhaul their data and voice
traffic from base stations to their core network over Ethernet
transport. The ECS4660-28F supports bit-layer clock recovery
solutions, IUT-T G.8261 and IEEE 1588v2 synchronous Ethernet,
and provides a highly robust hop-by-hop frequency mechanism.
Enhanced Security
The Edgecore ECS4660-28F provides enhanced security
features for connectivity and access control, including Access
Control Lists (ACLs), authentication, and port-level security with
IEEE 802.1X. ACL can be used to restrict access to sensitive
network resources by denying packets based on L2/L2/L4
headers. SSH and RADIUS authentication protects management
access to the switch, providing secure network management.
IEEE 802.1X port based access control ensures dynamic,
port-based security and user authentication for network access.
IP source guard prevents a malicious user from spoofing or
taking over another user’s IP address by creating a binding
table between client’s IP, MAC address, port and VLAN.
Simplified Management
For IP multicast traffic, the ECS4660-28F uses IGMP snooping to
provide fast client joins and leaves of multicast streams. It
prevents flooding of IP multicast traffic and limits
bandwidth-intensive video traffic to only the subscribers.
The ECS4660-28F supports IPv6 management functions for
authentication , and IPv6 QoS remapping when connecting to
the switch. The ECS4660-28F can be managed through an
industry-standard Command Line Interface (CLI) with a common
industry look and feel that reduces training and operating costs.
The switch also provides an easy-to-use web GUI interface
through a standard web browser.
With four-group RMON, the ECS4660-28F can easily backup
and restore firmware and configuration files via TFTP.
Advanced IPv4 and IPv6 Routing
The Edgecore ECS4660-28F supports hardware-based IPv4 and
IPv6 routing for maximum performance. It provides a seamless
migration path from IPv4 and IPv6 for future network upgrades
and investment protection.
Advance routing protocols such as RIP and OSPF provide
dynamic routing by routing by exchanging routing information
with other L3 switches or routes. Multicast routing is supported
under independent multicast protocols, including PIM-DM and
PIM-SM. DVMRP is also supported to interconnect two
multicast-enabled networks across non-multicast networks.
VRRP prevents your system from failing by dynamically backing
up multiple L3 switches for routing.
For a world always connected…
ECS4660-28F Product Specifications
24 1000BASE-X SFP ports
2 10G XFP ports
2 10G optional expansion module slots
1 RJ-45 Craft (10/100BASE-T) port for system management
1 RJ-45 console port
1 DB-15 port for alarm input and output connector
1 Alarm cut-off (ACO) push button
Switching Capability: 128 Gbps
Forwarding Rate: 95 Mpps
Packet Buffer Size: 3 MB
MAC Address Table: 32 K
L2 Features
Auto-negotiation for port speed and duplex mode
Flow Control:
IEEE 802.3x for full-duplex mode
Back-Pressure for half-duplex mode
Spanning Tree Protocol:
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
BPDU Guard
BPDU filtering
Root Guard
BPDU transparent
Loopback detection
ITU-T G.8032 Ethernet Ring Protection
Supports 4K VLANs
Port-based VLANs
IEEE 802.1v Protocol-based VLANs and Subnet-based VLANs
MAC-based VLANs
VLAN translation
VLAN trunking
Link Aggregation:
Static trunks
IEEE 802.3ad Link Aggregation Control Protocol
Trunk groups: 32, up to 2~8 ports for Gigabit Ethernet ports,
2~4 ports for 10 Gigabit Ethernet ports
IGMP Snooping:
IGMP v1/v2/v3 snooping
IGMP Proxy reporting
IGMP Filtering
IGMP Throttling
IGMP Immediate Leave
IGMP Querier
MVR (Multicast VLAN Registration)
Supports Jumbo frames up to 12 KB
TEL: +886-3-5638888 FAX: +886-3-6686111
No.1, Creation Rd. III, Hsinchu Science Park, Taiwan 30077
L3 Features
12K host table and 12 net table
512 static routes
4K multicast table (shared with IPv6)
Multi-netting, Super-netting (CIDR)
Static route
RIP v1/v2
IGMP v1/v2/v3 and proxy
ARP/ARP proxy
UDP helper
IPv6 hardware route:
6 K host table and 4 K net table
4 K multicast table (shared with IPv4) OSPFv3
MLD v1/v2
QoS Features
Priority Queues: 8 hardware queues per port
Traffic Classification:
IEEE 802.1p CoS
IP Precedence
MAC access control lists (source/destination MAC, Ethertype,
priority ID/VLAN ID)
IP standard access control lists (source IP)
IP extended access control lists (source/destination IP, protocol,
TCP/UDP port number)
Traffic Scheduling:
Strict Priority
Weighted Round Robin
Strict + WRR traffic scheduling
Weighted Random Early Detection
Two Rate Three Color Marker
Ingress traffic policing
Egress traffic shaping
Rate Limiting (ingress and egress, per port base)
GE: Resolution 64 Kbps ~ 1000 Mbps
Bundle Rate Control
Port security
IEEE 802.1X port-based and MAC-based authentication
Dynamic VLAN assignment
ACL assignment
QoS assignment
Guest Vlan
MAC authentication
Web authentication
DHCP snooping and option 82
AAA (RADIUS/TACACS+ authentication/ Accounting)
2K ACL rules/ 256 rules per port
Dynamic ARP Inspection
TEL: +1 (949)-336-6801
20 Mason Irvine, CA 92618
ECS4660-28F Product Specifications
IEEE 802.3ah Link
Link status/dying gasp clear
Send critical event for all fans failure
IEEE 802.1ag Connectivity Fault Management:
Connectivity check
Linktrace ITU-T Y.1731 Performance and Throughput:
Frame Delay
Frame Delay variation
Synchronous Ethernet
ITU-T g.8262 Synchronous Ethernet
Green Ethernet
Cable Diagnostics
Operating System of Switch
MEF9, MEF14 Comply
IPV6 Features
IPv4/IPv6 dual protocol stack
IPv6 Address Types Stack: Unicast
IPv6 Neighbor Discovery
SNMP over IPv6
HTTP over IPv6
Remote IPv6 ping
Switch Management:
CLI via console port or Telnet
Web management
SNMP v1, v2c, v3
Firmware and Configuration:
Firmware upgrade via TFTP/FTP/Xmodem
Multiple configuration files
Configuration file upload/download via TFTP/FTP server
RMON (groups 1, 2, 3 and 9)
BOOTP, DHCP client for IP address assignment
DHCP dynamic provision option 66,67
LLDP (802.1ab)
DNS client/proxy
Event/error log/system log
(Optional) ECview Pro, powerful network management software
that maximizes the managed capabilities of Edgecore devices
Topology Management
Performance Management
Configuration Management
Event Management
SNMP Management
Environmental Specifications
IEC 68-2-14
-40ºC to 65ºC (Standard Operating)
-40ºC to 70ºC (Non-Operating)
Humidity:5% to 95% (Non-condensing)
Vibration: IEC 68-2-36, IEC 68-2-6
Shock: IEC 68-2-29
Drop: IEC 68-2-32
Power Supply
Dual Power Inputs:
AC: 100 V ~240 VAC, 50 Hz~60 Hz
DC: -48 V
Dimensions (H x W x D): 1.5U height, 67 x 440 x 254 mm
(2.64 x 17.32 x 10 in.)
LED Indicators: Port, Uplink, System, Diagnostic
Weight: 4.65 kg
UL60950-1 & CSA 60950-1
IEC 60950-1 & EN 60950-1
Please check www.edge-core.com for the warranty terms in your
For More Information
To find out more about Edgecore Networks Corporation products
and solutions, visit www.edge-core.com.
About Edgecore Networks Corporation
Edgecore Networks Corporation is in the business of providing
innovative network solutions. In the service provider network, in
the data center or in the cloud, Edgecore Networks Corporation
delivers the software and systems that transform the way the
world connects. Edgecore Networks Corporation serves
customers and partners worldwide. Additional information can be
found at www.edge-core.com.
Edgecore Networks Corporation is a subsidiary of Accton
Technology Corporation, the leading network ODM company. The
Edgecore Data Center switches are developed and manufactured
by Accton.
To purchase Edgecore Networks solutions, please contact your
Edgecore Networks Corporation representatives at +886 3 563
8888 (HQ) or +1 (949)-336-6801 or authorized resellers.
© Copyright 2017 Edgecore Networks Corporation. The information contained herein is subject to change without notice. This
document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment,
equipment feature, or service offered by Edgecore Networks Corporation. Edgecore Networks Corporation shall not be liable for
technical or editorial errors or omissions contained herein.
Electromagnetic Compatibility
CE Mark
EN 61000-3-2/3
FCC Class A
VCCI Class A
TEL: +886-3-5638888 FAX: +886-3-6686111
No.1, Creation Rd. III, Hsinchu Science Park, Taiwan 30077
TEL: +1 (949)-336-6801
20 Mason Irvine, CA 92618
ECS4660-28F Product Specifications
Ordering Information
Optional Accessories
Product Description
100BASE-FX, Small Form Factor Pluggable (Distance: 2 km; Wavelength: 1310 nm)
100BASE-FX, Small Form Factor Pluggable (Distance: 20 km; Wavelength: 1310 nm)
1Gbps, Small Form Factor Pluggable (Distance: 500 m; Wavelength: 850 nm)
1Gbps, Small Form Factor Pluggable (Distance: 10 km; Wavelength: 1310 nm)
1Gbps, Small Form Factor Pluggable (Distance: 40 km; Wavelength: 1310 nm)
10G XFP transceiver, (Distance: 300 m; Wavelength: 850 nm), LC connector (Multi-mode)
10G XFP transceiver, (Distance: 10 km; Wavelength: 1310 nm), LC connector (Single-mode)
10G XFP transceiver, (Distance: 40 km; Wavelength: 1550 nm), LC connector (Single-mode)
ECView Pro
Network Management Software
AC power supply (100 V ~ 240 V)
DC power supply (-48 V)
10G SFP+ Single port module for ECS4660-28F
TEL: +886-3-5638888 FAX: +886-3-6686111
No.1, Creation Rd. III, Hsinchu Science Park, Taiwan 30077
TEL: +1 (949)-336-6801
20 Mason Irvine, CA 92618