CRL GRS GLASS RAILING TOOLS AND ACCESSORIES
Hilti® TE 2-S Deluxe
Rotary Hammer Drill
• 110 Volt Tool
Delivers 0 to 4,600
Blows Per Minute
MORE
CHOICES
crlaurence.com/base-shoe-tools
CRL Makita® 1" D-Handle
Rotary Hammer Drill
Includes: Depth Gauge, Side
Handle, and Carrying Case
• Variable Speed
0 to 1,100 RPM
• 110 Volt, 7 AMP Motor
• Fast and Efficient Drilling of 3/16" to
3/4" (5 to 19 mm) Diameter Holes
Into Concrete and Masonry
• Sturdy Motor With High Load Rating
• 0 to 4,500 Blows
Per Minute
• Uses S.D.S. Drills
This Hilti® TE 2-S Deluxe Rotary Hammer Drill is mainly for
drilling into concrete and masonry, however, its precision
hammering feature allows for drilling into brittle materials like tile
and stone as well. Includes: Tool with 13' (4 m) Power Cord, Side
Handle, and Depth-Gauge, all in a molded Carrying Case.
Minimum order is one each.
This Heavy-Duty Rotary Hammer with a variable speed and
reversing motor is ideal for wedge-bolt drilling. It accepts
®
SDS Plus bits while operating in 3-mode operation: "rotation only",
"hammering with rotation" and "hammering only" for multiple
applications. The ergonomic D-shaped handle with rubberized
soft grip gives the user increased comfort and control.
Minimum order is one each.
Hilti® TE-CX Masonry Drill Bits
CRL SDS Plus® Shank Masonry Drills
• For Drilling Into Concrete and Masonry
• Work in Both Regular
and Impact Drills with
SDS Plus® Drive
• ANSI Spec for
Concrete Anchors
CAT. NO. HRHD1
CAT. NO. EBAD38
3/8" Masonry Drill Bit
CAT. NO. HR2475
CAT. NO. EBAD1
CAT. NO. SDSW12
12 mm Masonry Drill Bit
Drill for 1/2" Anchors
CAT. NO. EBAD2
CAT. NO. SDSW38
12 mm Masonry Drill Bit
Drill for 3/8" Anchors
CAT. NO. EBAD3
CAT. NO. SDSW14
18 mm Masonry Drill Bit
Drill for 1/4" Anchors
Hilti® TE-CX are the world’s first Hammer Drill Bits with gradient
technology, superior heat resistance and ruggedness – even when
drilling into rebar. For use with EBA334, EBA335, and CA384334/SS
Hilti® Expansion Anchors (see page 188B).
CAT. NO.
DIAMETER WORKS WITH
EBAD38
EBAD1
EBAD2
EBAD3
3/8"
12 mm
12 mm
18 mm
LENGTH
CA38X334/SS Expansion Anchor 6-3/4"
EBA334 Expansion Anchor
6-11/16"
EBA334 Expansion Anchor
10-5/8"
EBA335 Expansion Anchor
18-1/2"
(171
(170
(270
(470
mm)
mm)
mm)
mm)
Minimum order: 1 each.
SDS Plus® Shank Masonry Drills are made to the ANSI
Specifications required for the proper performance of concrete
anchors. Life expectancy: 100-500 holes, depending on substrate
and drill used. They work in both regular and impact drills, and can
be used in a number of masonry materials.
CAT. NO.
DIAMETER
WORKS WITH
SDSW12
SDSW38
SDSW14
.495"
.389"
.259"
WBA12X4 Concrete Anchor 12" (305 mm)
WBA38X4 Concrete Anchor 12" (305 mm)
WBA14X3 Concrete Anchor
8" (203 mm)
Minimum order: 1 each. Sizes can be combined for quantity pricing.
Hilti is a registered trademark of Hilti Aktiengesellschaft Corporation.
Makita is a registered trademark of Makita Corporation.
SDS Plus is a registered trademark of Robert Bosch Gmblt.
go to crlaurence.com to search for
base-shoe-tools
Search
or enter the Catalog Number for complete product information
187B
TOLL Phone: (800) 421-6144
FREE Fax: (800) 262-3299
From Anywhere in the U.S. or Canada
LENGTH