GN112 | Deluxe Weighted “Friction Style” Dash

GN112 | Deluxe Weighted “Friction Style” Dash Mount for Garmin GPS
Adhesive
Safety Hook
Package Contents:
(1) CM012 - Weighted “friction style” dash mount
(1) GN014 - Suction pedestal with 17mm ball for Garmin devices
(1) Optional adhesive safety hook (recommended but not required)
(1) Alcohol cleaning pad
Compatible with Garmin® devices:
• Garmin Nüvi® - 200, 250, 260, 270, 300, 310, 350, 360, 370, 600,
610, 650, 660, 670, 680, 750, 760, and 770 models
• Garmin StreetPilot® - c310, c510, c530, c550, and c580 models
Garmin brand name and Nüvi and StreetPilot product names are trademarks
or registered trademarks of Garmin International. Arkon Resources, Inc. is not
affiliated with Garmin International.
Patent Pending
CM012 with GN014
Weighted “Friction Style”
Dash Mount with pedestal for Garmin GPS
!
Do not place mount in or near an air bag deployment
zone or where it will obstruct view of the road.
Dash Mount Installation
Step 1.
Find a safe location on the vehicle dash that is not in an air
bag deployment zone or will obstruct view of the road.
AIRBAG
Step 2.
Optional Safety hook installation will add extra stability.
Clean the desired area with the included alcohol pad
and let dry. Remove the adhesive backing on the safety
anchor. The hook on the anchor must point towards the
windshield. Press and hold the hook down on to the dash
surface for about a minute. Allow 24 hrs. to cure to the
dash surface at room temperature (72° F.)
WIN
DSH
IELD
Hook towards windshield
Step 3.
!
Place the loop on the back of the dash mount around the
safety hook and place on the dash in front of the hook.
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
Continued on other side...
The Mobile Mounting Specialists™
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan
© Copyright 2008 Arkon Resources, Inc.
GN112 | Deluxe Weighted “Friction Style” Dash Mount for Garmin GPS - Cont.
Pedestal Installation
Step 1.
Place the suction cup of the pedestal down on the circular
mounting disc in the center of the dash mount with the
lever up.
Step 2.
Flip the locking lever down to secure the pedestal to the
dash mount. Adjust the angle of the pedestal arm by
tightening the rotation knob.
Garmin Device Attachment
Step 1.
!
Attach your Garmin GPS device (sold separately, not
included) to the pedestal mount ball head by firmly
pushing the ball into the socket on the back of the device.
Adjust the screen angle of your device as needed.
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists™
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan
© Copyright 2008 Arkon Resources, Inc.