U680 Abbreviated instruction - CITIZEN WATCH Global Network

U680 Abbreviated instruction
English
•This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
•To see details of charging time, specifications and operations, refer to the instruction manual:
U680 instruction manual
Time indication of this watch
Component identification
This watch indicates three types of time below:
UTC hour hand
UTC minute hand
Function hand
Minute hand
Following items are
indicated:
• Power reserve
• Signal station
Coordinated Universal Time
(UTC)
Home time
Local time
Button B
24-hour hand
Hour hand
Crown
Digital display 1
Digital display 2
Button A
Mode hand
Second hand
•Actual appearance may differ from the illustration.
•The crown has two positions when pulling it out.
•Refer also to our web page for detail of usage of the
scale and bezel on the watch.
(http://www.citizenwatch-global.com/support/
pdf/enhanced/e.pdf)
Crown's position
1. Pull the crown out to position 1.
2. Rotate the crown to change the mode to [TME] or [CAL].
3. Press and release the lower right button A or the upper right
button B repeatedly to select an area.
•See the table in Setting the area of the home time for selectable areas.
0 1 2
4. Push the crown in to position 0 to finish the procedure.
Switching the home time and local time
Changing the mode
1. Pull the crown out to position 1.
2. Rotate the crown to change the mode.
•Turn the crown so that the mode hand will point to a marker of the mode
indication securely.
Mode
Changing the time indication of the local time
•You can choose a time zone from the 44 areas and UTC for the local time.
You can switch the home time and local time easily.
1. Pull the crown out to position 1.
2. Rotate the crown to change the mode to [TME] or [CAL].
3. Press and release both the lower right button A and upper
right button B simultaneously.
Content
TME
Mode for indicating the home time and the local time.
CAL
Mode for indicating the date and day of week of the local time.
TMR
Mode for using the countdown timer. For details, see the
instruction manual.
CHR
Mode for using the chronograph. For details, see the instruction
manual.
WT-S
Mode for hiding/indicating areas for the world time and changing
their summer time setting.
AL-1/2
Mode for using the alarm function. For details, see the instruction
manual.
RX-S
Mode for setting the type of time signal/summer time signal
reception. For details, see Setting the reception time and Setting
summer time.
The alarm sounds and the home time and local time switch.
•The calendar switches at the same time.
4. Push the crown in to position 0 to finish the procedure.
3. Push the crown in to position 0 to finish the procedure.
Using LED lights
Pressing button B while the crown is in position 0 turns on the LED lights for 2
seconds.
However, note that the lights do not come on in the following cases.
•During the mode is [TMR] or [CHR]
•During radio wave reception
•During 2-second interval movement (insufficient charge warning status)
1/4
U680 Abbreviated instruction
Checking the power reserve
Setting the area of the home time
The function hand indicates the power reserve amount in levels.
Level
3
2
1
Choose the area where you usually use the watch to set the home time.
•The watch tries to receive the signal from the station assigned for the area of the
home time (indicated on the digital display 2).
0
1. Pull the crown out to position 1.
2. Rotate the crown to change the mode to [TME].
3. Press and release the lower right button A or the upper right
Indication
Duration 180 - 130 days
130 -20 days
(approx.)
Power reserve is Power reserve is
OK.
sufficient.
Meaning
20 - 3 days
3 days ‒
Power reserve is
getting low.
Insufficient
charge warning
has started.
button B repeatedly to select an area.
•An area name and its time is shown on the digital display 1.
•Pressing and holding the button changes area names continuously.
4. Press and release both the lower right button A and upper
right button B at the same time.
5. Push the crown in to position 0 to finish the procedure.
Charge immediately
Checking the signal reception result
About the time zone
•The time zone in the table is based on UTC (Coordinated Universal Time).
•Countries or regions may change time zones for various reasons.
•This watch receives the time signal at 2:00 AM every day and adjust the time
and calendar automatically. If the 2:00 AM reception was unsuccessful, it tries
signal reception again at 3:00 AM and 4:00 AM.
•The 4:00AM time reception can be changed to other time. Refer to Setting the
reception time.
1.
2.
3.
4.
Time Area Representative area Signal
zone name
station
Coordinated
Universal Time
LON *London
0
MAD *Madrid
PAR *Paris
+1
ROM *Rome
BER *Berlin
CAI Cairo
+2 ATH *Athens
JNB Johannesburg
MOW *Moscow
+3
RUH Riyadh
+3.5 THR Tehran
+4 DXB Dubai
0
Pull the crown out to position 1.
Rotate the crown to change the mode to [TME], [CAL] or [RX-S].
Push the crown in to position 0 .
Press and release the lower right button A.
The second hand indicates the signal reception result (H/M/L/NO) and
the function hand indicates the signal station (USA/EUR/CHN/JPN) from
which the time signal was received.
Reception result
indication (NO)
Reception result
indication
(H/M/L)
Function hand
•Summer time setting of the home time is indicated on the digital display 2.
(“SMT” and “ON” (or “OFF”) are alternately indicated).
H
M
L
NO
Received signals in a very good condition
Received signals in a good condition
Received signals in a not-good condition
The reception failed.
EUR
+12
-11
-10
-9
-8
♦EUR
-7
-6
-5
+5 KHI Karachi
+5.5 DEL Delhi
+6 DAC Dhaka
+6.5 RGN Yangon
+7 BKK Bangkok
+8 SIN Singapore
-4
-3
+8
+8
+9
5. Press and release the lower right button A to finish the
procedure.
–
+4.5 KHL Kabul
•“H”, “M” and “L” only indicate the condition for reception, not related to
the reception performance of the watch.
•Try signal reception following the steps in Receiving the signal manually
(on-demand reception)if the last reception failed.
The hands returns to normal.
•It returns to normal indication automatically in about 10 seconds without
pressing the button.
UTC
Time
zone
+9.5
+10
+11
HKG
BJS
TPE
SEL
TYO
Hong Kong
Beijing
Taipei
Seoul
Tokyo
♦CHN
-2
-1
Any
Area
Signal
name Representative area station
Adelaide
Sydney
♦JPN
Noumea
Auckland
Suva
Midway
Honolulu
♦USA
**Anchorage
**Vancouver
**Los Angeles
**Denver
USA
**Mexico City
**Chicago
**New York
**Montreal
Santiago
♦USA
Rio de Janeiro
Fernando de
FEN
Noronha
♦EUR
PDL *Ponta Delgada
Depends on the time zone
HOM
set.
ADL
SYD
NOU
AKL
SUV
MDY
HNL
ANC
YVR
LAX
DEN
MEX
CHI
NYC
YMQ
SCL
RIO
CHN
JPN
•USA: the United States of America, EUR: Europe, CHN: China, JPN: Japan
•For an area with * or **, the automatic switching of summer time/standard time
are performed together.
•When using the watch in an area not listed in the table, select an area name in
the same time zone.
•Areas with ♦ mark are out of receivable range and signals cannot be received.
(The watch tries to receive signals from the target signal station though.)
•It may be difficult to receive signals in certain environment where it is hard for
signals to reach.
2/4
U680 Abbreviated instruction
Receiving the signal manually (on-demand reception)
Activating/deactivating summer time for each area
•The watch tries to receive the signal from the station assigned for the area of the
home time (indicated on the digital display 2).
•The watch does not try to receive the signal when the home time is UTC.
•The local time and UTC are adjusted synchronously as the reception finished
successfully.
•It takes 2-15 minutes to finish reception.
1.
2.
3.
4.
1. Pull the crown out to position 1.
2. Rotate the crown to change the mode to [WT-S].
3. Pull the crown out to position 2.
The digital display 2 turns off and “ON” or “OF” of the summer time setting
Pull the crown out to position 1.
of the area displayed on the digital display 1 starts blinking.
Rotate the crown to change the mode to [TME], [CAL] or [RX-S]. 4. Rotate the crown to select an area.
Push the crown in to position 0 .
5. Press and release the lower right button A to select the
summer time setting.
Press and hold the lower right button A for 2 seconds or more.
After an alarm sounds and the second hand points “RX”, release the button.
The second hand moves to point “H”, “M”, or “L” and then the time signal
reception starts. The function hand indicates the signal station from which
the time signal is to be received.
Summer time is indicated.
ON
The standard time is indicated.
OF (OFF)
•Each time you press the button, the setting changes alternately.
Reception-in-progress
indication (RX)
Reception result
indication (NO)
Reception result
indication
(H/M/L)
Setting the time and the calendar manually
The second hand returns to normal movement after finishing reception.
Reception was successful Corrected time/calendar is indicated.
Reception failed
6. Repeat steps 4 and 5 to set other areas.
7. Push the crown in to position 0 to finish the procedure.
•The time of the home time and UTC cannot be adjusted separately.
•The time of the home time and UTC is synchronously adjusted as that of the
local time is adjusted.
Function hand
Setting the time
The time is not corrected and the previously set time
resumes.
1. Pull the crown out to position 1.
2. Rotate the crown to change the mode to [TME].
3. Press and release the lower right button A or the upper right
Setting the reception time
1.
2.
3.
4.
You can activate/deactivate summer time separately for every area except UTC.
Pull the crown out to position 1.
Rotate the crown to change the mode to [RX-S].
Pull the crown out to position 2.
Press and release the upper right button B.
button B repeatedly to select an area.
4. Pull the crown out to position 2.
The second had moves to the 0 second position and the digital display 2
(home area) turns off.
The summer time setting starts blinking and becomes adjustable.
The current reception time setting starts blinking and becomes adjustable.
5. Press and release the upper right button B repeatedly to
5. Press and release the lower right button A repeatedly to
change the target to be set.
select an reception time setting.
•Each time you press the button, the target changes as follows:
•Each time you press the button, the setting changes as follows:
AUT → MAN → OFF → (back to the top)
The 4:00AM time reception can be changed to other time (home
time) in 1-hour units.
It cannot be set to 2AM and 3AM.
OFF (off) Automatic reception is not performed.
Automatic reception is performed according to the initial
AUT
(automatic) settings (at 2AM, 3AM and 4AM).
<Normal time display>
<Summer time setting>
<Second>
<12/24-hour basis>
<Hour>
<Minute>
MAN
(manual)
•When you select “MAN”, rotate the crown to set the time of automatic
reception.
6. Push the crown in to position 0 to finish the procedure.
Setting summer time
Adjusting the automatic switching of summer time/standard time
You can choose whether the watch switches summer time/standard time
automatically or not.
6. Adjust the time/indication/setting.
Use the crown to adjust the hour and minute.
Use button A to set the summer time, second and 12/24-hour basis.
7. Repeat steps 5 and 6 to set other targets.
8. Push the crown in to position 0 to finish the procedure.
1. Pull the crown out to position 1.
2. Rotate the crown to change the mode to [RX-S].
3. Pull the crown out to position 2.
The current setting for automatic switching starts blinking and becomes
adjustable.
4. Press and release the lower right button A to select “AU” or
“mA”.
Summer time/standard time are switched automatically
AU (automatic) depending on the summer time signal.
mA (manual)
Summer time/standard time are not switched automatically.
•Each time you press the button, the setting changes alternately.
5. Push the crown in to position 0 to finish the procedure.
3/4
U680 Abbreviated instruction
Setting the calendar
1. Pull the crown out to position 1.
2. Rotate the crown to change the mode to [CAL].
3. Press and release the lower right button A or the upper right
button B repeatedly to select an area.
4. Pull the crown out to position 2.
Correcting the reference position
1. Pull the crown out to position 1.
2. Rotate the crown to change the mode to [CHR].
3. Pull the crown out to position 2.
The hands start to move to the current reference positions stored in
memory.
The digital display 2 turns off.
The month starts blinking and becomes adjustable.
4. Press and hold the upper right button B for 2 seconds or more.
change the target to be set.
5. Press and release the upper right button B repeatedly to
5. Press and release the upper right button B repeatedly to
change the target to be set.
•Each time you press the button, the target changes as follows:
<Normal time display>
<Month>
<Date>
“CHA” blinks on the digital display 2 and the function hand becomes
adjustable.
<Year>
6. Rotate the crown to adjust the calandar.
7. Repeat steps 5 and 6 to set other targets.
8. Push the crown in to position 0 to finish the procedure.
Checking the reference position
1. Pull the crown out to position 1.
2. Rotate the crown to change the
mode to [CHR].
3. Pull the crown out to position 2.
6.
7.
8.
9.
•Each time you press the button, the target changes as follows:
Function hand → UTC hour and minute hands → Hour hand/24-hour
hand → Minute hand → (back to the top)
Rotate the crown to adjust the target hand.
Repeat steps 5 and 6 to set other targets.
Press and hold the upper right button B for 2 seconds or more.
Push the crown in to position 0 to finish the procedure.
Resetting the watch - All Reset
1.
2.
3.
4.
The hands start to move to the current
reference positions stored in memory.
Pull the crown out to position 1.
Rotate the crown to change the mode to [CHR].
Pull the crown out to position 2.
Press and release both the lower right button A and upper
right button B simultaneously.
All the digital indication lights up and the watch is reset.
Then a confirmation alarm sounds and all the hands show demonstration
movement.
4. Check the reference position.
Correct reference positions:
•Hour, minute and second hands: 0 hour
00 minute 00 second
•24-hour hand: “24”
•UTC hour and minute hands: 0 hour 00 minute
•Function hand: CHN
The setting values after All Reset
Areas of home time and local UTC
time
12:00 AM
Time
Calendar
Reception time setting
When the current reference position is different from the correct one,
proceed to step 4 of Correcting the reference position.
January 1, 2008
AUT
OF (OFF) at all time zones
Summer time setting
Automatic switching of
summer time/standard time AU
setting
Alarm settings and time OF (OFF), UTC, 12:00AM
5. Push the crown in to position 0 to finish the procedure.
Timer
Chronograph
99:00
00:00:00:00
After All Reset
After All Reset, adjust the reference position and set the time and calendar and
other settings.
4/4