E-Manual - Projector Central

E12339
First Edition
April 2017
E-Manual
COPYRIGHT AND WARRANTY INFORMATION
No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except
documentation kept by the purchaser for backup purposes, without the express written permission of
ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the is
defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR
AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING
DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS
AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM
ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL
USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY
ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND
SOFTWARE DESCRIBED IN IT.
Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved.
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to
recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to
claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and
damage to real property and tangible personal property; or any other actual and direct damages resulted
from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract
price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or
infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and
your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS
AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING
LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR
POSSIBILITY.
SERVICE AND SUPPORT
Visit our multi-language web site at https://www.asus.com/support/
2
LED projector E-Manual
Table of Contents
About this manual.............................................................................................. 5
Conventions used in this manual................................................................ 6
Typography.......................................................................................................... 6
Multi-language versions................................................................................. 6
Safety precautions.............................................................................................. 7
Using your LED projector................................................................................ 7
Servicing and replacement of parts........................................................... 7
Caring for your LED projector....................................................................... 8
Proper disposal................................................................................................... 8
Chapter 1: Knowing your LED projector
Features................................................................................................................10
Top view.............................................................................................................10
Front view...........................................................................................................12
Rear view............................................................................................................13
Right side............................................................................................................15
Left side.............................................................................................................16
Bottom view......................................................................................................17
Extended features...........................................................................................18
Flashlight...............................................................................................................18
SOS..........................................................................................................................19
Chapter 2: Setting up
Operating your LED projector......................................................................22
Connect the LED projector to the power adapter...............................22
Connect the LED projector to your device.............................................24
Connecting micro USB devices.....................................................................24
Connecting USB Type-C devices...................................................................25
Connecting peripherals...................................................................................26
Press the power button.................................................................................27
Open the lens cover and adjust the focus ring.....................................28
Screen size and projection distance table.................................................29
LED projector E-Manual
3
Chapter 3: Using the LED projector
Downloading the companion apps...........................................................32
Using the companion app.............................................................................33
Settings .............................................................................................................33
Projection..............................................................................................................33
Brightness.............................................................................................................34
Keystone................................................................................................................34
Projection Position.............................................................................................34
Others.....................................................................................................................34
Splendid.............................................................................................................34
Information........................................................................................................35
Appendices
FAQs ....................................................................................................................38
Federal Communications Commission Statement...............................40
Regional notice for California.......................................................................40
Canadian Department of Communications Statement......................41
Global Environmental Regulation Compliance and Declaration ....41
ASUS Recycling/Takeback Services............................................................41
Specifications for E1Z LED projector..........................................................42
4
LED projector E-Manual
About this manual
This manual provides information about the hardware and software
features of your LED projector through the following chapters:
Chapter 1: Knowing your LED Projector
This chapter details the parts of your LED projector and its
accompanying remote control.
Chapter 2: Setting up
This chapter shows you how to set up your LED projector and
use its parts for input device connection.
Chapter 3: Using the LED projector
This chapter describes the features of the LED projector’s control
panel buttons and how to use them to launch the functions of
your LED projector.
Appendices
This section includes safety notices for your LED projector.
LED projector E-Manual
5
Conventions used in this manual
To highlight key information in this manual, some text are presented
as follows:
IMPORTANT! This message contains vital information that must be
followed to complete a task.
NOTE: This message contains additional information and tips that can
help complete tasks.
WARNING! This message contains important information that must
be followed to keep you safe while performing tasks and prevent
damage to your LED projector's data and components.
Typography
Bold = This indicates a menu or an item that must be selected.
Italic
= This indicates sections that you can refer to in this manual.
Multi-language versions
Download other language versions of this E-Manual via this website:
https://www.asus.com/support/
6
LED projector E-Manual
Safety precautions
Using your LED projector
•
Refer to the manual and take note of the safety instructions
before operating your LED projector.
•
Follow the notes and warnings stated in the user manual.
•
DO NOT place your LED projector on uneven or unstable
surfaces.
•
DO NOT use your LED projector in smoky environments. Smoke
residue may cause build-up on critical parts and damage the
LED projector or decrease its performance.
•
DO NOT use damaged power cords, accessories, and other
peripherals with your LED projector.
•
Keep the LED projector’s plastic packages out of the reach of
children.
•
DO NOT block or place anything near the LED projector’s
ventilation holes. Doing so may cause internal heat build-up
that can degrade picture quality and damage the projector.
•
Ensure that the operating voltage of your LED projector
matches the voltage of your power source.
Servicing and replacement of parts
•
DO NOT disassemble or attempt to service this LED projector by
yourself. Contact your local ASUS service center for assistance.
•
Risk of explosion if battery is replaced by an incorrect type.
Dispose used batteries according to safety instructions and
contact your local ASUS service center for assistance.
•
When replacing parts of your LED projector, purchase items
as specified by ASUS and contact your local service center for
assistance.
LED projector E-Manual
7
Caring for your LED projector
•
Switch off then unplug the LED projector from the power outlet
before cleaning it.
•
When cleaning the LED projector’s housing, use a clean soft
cloth dampened with water or a mix of water and neutral
detergent. Wipe it dry using a soft dry cloth.
•
Ensure that the lens is cool before cleaning it. Gently wipe the
lens using a lens cleaning paper. DO NOT touch the lens with
your hands.
•
DO NOT use liquid or aerosole cleaners, benzene, or thinners on
your LED projector.
•
Never operate this LED projector immediately after moving it
from a cold location. When the LED projector is exposed to a
drastic change in temperature, moisture may condense on the
lens and its other internal parts. To prevent this, use the unit two
(2) hours after an extreme or sudden change in temperature
occurs.
Proper disposal
DO NOT throw your LED projector in municipal waste. This
product has been designed to enable proper reuse of parts
and recycling. The symbol of the crossed out wheeled bin
indicates that the product (electrical, electronic equipment
and mercury-containing button cell battery) should not
be placed in municipal waste. Check local regulations for
disposal of electronic products.
DO NOT throw the battery in municipal waste. The symbol
of the crossed out wheeled bin indicates that the battery
should not be placed in municipal waste.
8
LED projector E-Manual
Chapter 1:
Knowing your LED
projector
Chapter 1: Knowing your LED
projector
LED projector E-Manual
9
Features
Top view
Focus ring
The focus ring allows you to adjust the image focus of your LED
projector.
10
LED projector E-Manual
Power indicator and battery status indicator
This LED indicator indicates the following scenarios for your LED
projector:
•
It lights up when the LED projector is powered on.
•
It lights up as either green or red depending on the battery
charge status.
For details on how this LED indicator functions as a battery status
indicator, refer to the following table:
Color
Status
Solid Green
The LED projector is plugged to a power source,
running on battery mode and the battery
power is more than 25%, or running in power
bank mode.
The LED projector is running on battery mode
only and the battery power is not more than
25%.
Solid Red
Blinking Orange The temperature of the LED projector
is too high and will lower its brightness
automatically. The LED projector will shut down
if the temperature is still too high to prevent
overheating.
Battery charge indicator
This LED indicator lights up when the LED projector is plugged to a
power source using its power adapter.
IMPORTANT! Use only the bundled power adapter to charge
the battery pack and supply power to your LED projector.
LED projector E-Manual
11
Front view
Lens cover
The lens cover protects the lens from scratches and possible dirt
build-up.
IMPORTANT! Remove the lens cover before using your LED
projector.
Lens
The lens projects video or image files onscreen from your input
device.
WARNING!
• DO NOT touch the lens with your hands or any sharp object.
• DO NOT look directly into the lens.
12
LED projector E-Manual
Rear view
Manual reset hole
Insert a straightened paper clip in this hole to restore your LED
projector to its default settings.
Audio output jack port
The audio output jack port allows you to connect your LED projector
to amplified speakers or headphones.
Micro USB 2.0 port
This port also allows you to connect your LED projector to a
compatible device to stream media contents.
Power output port
This power output port provides up to 5V/1A of output voltage and
current. You can connect your mobile device to this port to keep it
charged while using it with your LED projector.
LED projector E-Manual
13
Power (DC) input port
Insert the bundled power adapter into this port to charge the battery
pack and supply power to your LED projector.
IMPORTANT! Use only the bundled power adapter to charge
the battery pack and supply power to your LED projector.
WARNING! The adapter may become warm to hot while in use.
DO NOT cover the adapter and keep it away from your body
while it is connected to a power source.
Power / Splendid button
•
Long press this power button to turn on or turn off your LED
projector.
•
Short press this button after turning on your LED projector to
switch between Splendid modes.
Audio speaker
This LED projector uses SonicMaster technology to provide hi-fi
sound quality, with richer bass sounds, straight from the builtin audio
speaker.
14
LED projector E-Manual
Right side
Focus ring
The focus ring allows you to adjust the image focus of your LED
projector.
Air vents
The air vents allow cool air to enter and warm air to exit the LED
projector.
WARNING! Ensure that paper, books, clothing, cables, or other
objects do not block any of the air vents or else overheating
may occur.
LED projector E-Manual
15
Left side
Air vents
The air vents allow cool air to enter and warm air to exit the LED
projector.
WARNING! Ensure that paper, books, clothing, cables, or other
objects do not block any of the air vents or else overheating
may occur.
16
LED projector E-Manual
Bottom view
Tripod socket
Attach the LED projector to a tripod using this socket.
LED projector E-Manual
17
Extended features
Your LED projector also have stand-alone features that are launched
by pressing the Power / Splendid button while your LED projector is
on battery mode.
NOTE:
• These feature are only available when no power adapter or signal
is connected to the LED projector.
• To turn off or switch between the flashlight and SOS feature of
your LED projector, just press the Power / Splendid button until
your preferred lighting feature is disabled or enabled.
IMPORTANT! Ensure that your LED projector is charged and can run
on battery mode before enabling these features. Battery time varies
depending on usage.
Flashlight
The LED projector flashes a steady white light when you use this
feature.
Power / Splendid
button
To use your LED projector as a flashlight:
1. Disconnect all peripherals from your LED projector then long
press the power button to turn it on.
18
LED projector E-Manual
2. Open the cover of your LED projector’s lens.
3. Press the Power / Splendid button repeatedly until the LED
projector flashes a steady white light.
SOS
The LED projector flashes a blinking white light when you use this
feature.
Power / Splendid
button
To use your LED projector as an emergency light:
1. Disconnect all peripherals from your LED projector then long
press the power button to turn it on.
2. Open the cover of your LED projector's lens.
3. Press the Power / Splendid button repeatedly until the LED
projector flashes a blinking white light.
LED projector E-Manual
19
20
LED projector E-Manual
Chapter 2:
Setting up
Chapter 2: Setting up
LED projector E-Manual
21
Operating your LED projector
This portable LED projector allows you to plug and play your devices
so you can easily open multimedia files and hear audio straight from
its built-in SonicMaster speakers.
For your safety and to maintain the quality of this unit, refer to the
following steps when operating your LED projector.
Connect the LED projector to the power adapter
A. Connect the micro USB cable to the power adapter.
B.Connect the micro USB connector into your LED projector.
C. Insert the plug head into the power adapter.
D. Plug the power adapter into a grounded power outlet.
Charge the LED projector for 3 hours before using it in battery
mode for the first time.
NOTE: The power adapter may vary in appearance, depending on
models and your region.
22
LED projector E-Manual
IMPORTANT!
• Use only the bundled power adapter to charge the battery pack
and supply power to your LED projector.
• Ensure that your LED projector is connected to the power adapter
before turning it on for the first time. We strongly recommend that
you use a grounded wall socket while using your LED projector on
power adapter mode.
• The socket outlet must be easily accessible and near your LED
projector.
• To disconnect your LED projector from its main power supply,
unplug your LED projector from the power socket.
WARNING!
Read the following precautions for your LED projector’s battery:
• The battery capacity will vary depending on the environment
temperature, humidity, and LED Projector usage.
• The battery used in this device may present a risk of fire or
chemical burn if removed or disassembled.
• Follow the warning labels for your personal safety.
• Risk of explosion if battery is replaced by an incorrect type.
• DO NOT dispose of in fire.
• Never attempt to short-circuit your LED projector’s battery.
• Never attempt to disassemble and reassemble the battery.
• Discontinue usage if leakage is found.
• The battery and its components must be recycled or disposed of
properly.
• Keep the battery and other small components away from children.
LED projector E-Manual
23
Connect the LED projector to your device
Connecting micro USB devices
A.Connect one end of the micro USB to micro USB cable into your
LED projector.
B. Connect the other end of the micro USB to micro USB cable to
your device.
24
LED projector E-Manual
Connecting USB Type-C devices
A.Connect the micro USB connector of the micro USB cable into
your LED projector.
B. Connect the other end of the micro USB cable to the USB Type-C
male to USB Type-A female adapter.
C. Connect the adapter to your device.
LED projector E-Manual
25
Connecting peripherals
Audio output
Power output (5V/1A)
1s
26
LED projector E-Manual
Press the power button
3s
NOTE: The battery pack inside your LED projector stops charging
while the LED projector is in use. Refer to the battery indicator for the
current charge status of your LED projector. You may also refer to the
Top View section in this manual for more details.
LED projector E-Manual
27
Open the lens cover and adjust the focus ring
NOTE: Use a still image when adjusting the onscreen display.
A. Open the lens cover by moving it to the right.
B. Adjust the image focus of the projection onscreen by moving
the focus ring up or down.
28
LED projector E-Manual
Screen size and projection distance table
Adjust the LED projector’s distance from the screen using the table
below.
Screen size - 16:9
(inches)
(millimeters)
Projection distance
(meters)
16
394
0.5
32
813
1.0
100
2540
3.1
120
3048
3.7
LED projector E-Manual
29
30
LED projector E-Manual
Chapter 3:
Using the LED projector
Chapter 3: Using the LED
projector
LED projector E-Manual
31
Downloading the companion apps
Your LED projector requires additional companion apps on your
device before you can stream media contents from it.
A. Connect your device to the Internet, then log in or sign up for a
Google account.
B. Scan the QR codes or Launch Play Store and search for the
companion apps.
C. Install the companion apps.
32
LED projector E-Manual
Using the companion app
After you have installed the additional companion apps, you can use
the apps to change the settings of your LED projector.
Settings
Select this menu option to adjust your LED projector settings.
Projection
Turn this menu option ON to stream media contents from your
device.
LED projector E-Manual
33
Brightness
Move the slider to adjust the brightness of your projection onscreen.
Keystone
Auto keystone
Select this menu option to automatically adjust the alignment
of your image.
Correction
This option allows you to manually adjust the alignment of your
image. You can also move the slider to make quick adjustments.
Projection Position
This option allows you to change the way your projections are
oriented onscreen based from the current location of your LED
projector.
You may change your projection’s orientation to correspond with the
location where your LED projector is currently placed: Front table,
Rear table, Front ceiling, Rear Ceiling.
Others
Reset all settings
This option restores all the default settings of your LED
projector.
Splendid
Select this menu option to activate either of the following display
modes, depending on how the LED projector is powered on. You
may also directly launch this menu option by pressing Power /
Splendid button.
34
LED projector E-Manual
Refer to the following information for details on the different modes
you can activate via Splendid:
•
Presentation mode - This mode allows you to optimize the
brightness of your LED projector and is suitable for quick
presentations of up to ninety (90) minutes.
•
Standard - This mode fits general display uses of the LED
projector.
•
Theater - This mode is recommended when using the LED
projector to display videos.
•
Eco mode - This mode allows the LED projector to run under
minimum power consumption for up to five (5) hours.
NOTE:
• Flashlight and SOS mode are only available when no power
adapter or signal is connected to the LED projector.
• The battery capacity will vary depending on the environment
temperature, humidity, and LED Projector usage.
Information
Select this menu option to see an overview of information about
your LED projector. The Battery life, Projector firmware version,
and Model Name will be displayed on this page.
LED projector E-Manual
35
36
LED projector E-Manual
Appendices
Appendices
Appendices
LED projector E-Manual
37
FAQs
1. Does my LED projector work with all phones?
The E1Z LED projector will work with android 5.0 or above
devices that support host storage mode.
2. My LED projector does not project anything. How can I fix
this?
You can try doing any of the following suggestions:
•
Ensure that you have installed the companion apps.
•
If the DisplayLink Presenter app does not pop-up when
you connect your android device, try restarting your LED
projector and your android device.
•
If the problem still exists, contact your local ASUS service
center for assistance.
3. Why does my android device keep disconnecting with my
LED projector?
Some android devices will stop the USB connection after the
screen is off or enters the lock screen mode. If this happens, try
keeping your android device awake or disable sleep mode.
4. Why is audio is not coming out from my LED projector?
Check whether USB audio routing is enabled on your android
device. By default, android devices will automatically route
audio to the USB port when an USB audio peripheral is
connected.
To manually configure the USB audio routing settings, go to
Settings > About > Software information > Build number (tap a
few times) > Settings > Developer options > Disable USB audio
routing.
38
LED projector E-Manual
5. Audio is stuttering and not playing correctly from my LED
projector.
USB audio performance may vary across different android
devices and manufacturers. If audio performance from your
android device is inconsistent, we recommend disabling USB
audio routing and use the internal speakers instead.
To manually configure the USB audio routing settings, go to
Settings > About > Software information > Build number (tap a
few times) > Settings > Developer options > Disable USB audio
routing.
LED projector E-Manual
39
Federal Communications Commission
Statement
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the Federal
Communications Commission (FCC) rules. These limits are designed
to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the distance between the equipment and receiver.
•
Connect the equipment to an outlet on a different circuit than
that which the receiver is connected to.
•
Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference that may cause
undesired operation.
Regional notice for California
WARNING
Cancer and Reproductive Harm www.P65Warnings.ca.gov
40
LED projector E-Manual
Canadian Department of
Communications Statement
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department of
Communications.
This class B digital apparatus complies with Canadian ICES-003.
Global Environmental Regulation
Compliance and Declaration
ASUS follows the green design concept to design and manufacture
our products, and makes sure that each stage of the product
life cycle of ASUS product is in line with global environmental
regulations. In addition, ASUS disclose the relevant information
based on regulation requirements.
Please refer to http://csr.asus.com/english/Compliance.htm for
information disclosure based on regulation requirements ASUS is
complied with:
Japan JIS-C-0950 Material Declarations
EU REACH SVHC
Korea RoHS
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment
to the highest standards for protecting our environment. We believe
in providing solutions for you to be able to responsibly recycle our
products, batteries, other components as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for
detailed recycling information in different regions.
LED projector E-Manual
41
Specifications for E1Z LED projector
Display
Projection
Lens
Video
Features
Display Technology
Light Source
Light Source Life (max)
True Resolution (native)
Light Output
(Max. lumens)
Contrast Ratio
Color Saturation (NTSC)
Display Colors
Throw Ratio
Projection Distance
Projection/Screen Size
Projection Offset
Zoom Ratio
R/G/B LED
30,000 hrs
WVGA 854 x 480
150 Lumens
3500:1 DCR
100%
16.7 million colors
1.4 (32 in. @ 1 m @ 16:9)
0.5 m to 3.7 m
15 in. to 120 in.
100%
Fixed
Picture Modes
Presentation, Standard,
Theater, Eco, Flashlight,
SOS
Keystone adjustment
Digital
(Up to ± 40 degree)
Auto Keystone
Aspect Ratio
Audio
Features
0.2” DLP®
Yes
16:9
Projector Placement
Front table, Front ceiling,
Rear table, Rear Ceiling
Built-in speakers
2W speaker (ASUS
SonicMaster Audio
technology)
(continued on the next page)
42
LED projector E-Manual
Signal
Frequency
Power
Noise
Interface
Digital Signal
Frequency
Power Consumption
(Typical)
Power Standby
mode
Internal Battery
Battery Life
Acoustic Noise
Dimension
Weight
Operating
Temperature
Operating
Humidity
<18W
<0.5W
6400mAh (1A@5V)
24Wh (up to 5 hours)
30 dB (Standard mode)
28 dB (Theater mode)
Signal Input
USB (Android 5.0/
Windows)
Audio Out
Earphone out
USB 2.0 Port
Mechanical
Design
24.7 KHz(H) to 74.6
KHz(H) / 50 Hz(V) to 60
Hz(V)
Micro USB Type B Port
for charging (2A@9V)
USB Type A Port for
Power Bank (1A@5V)
Chassis Colors
Tripod Socket
Lens Cover
Physical Dimension
(W x H x D)
Golden
Net Weight (Esti.)
307 g
Yes
Yes
83 x 29 x 110 mm
-10° C to 40° C
20% to 90%
(continued on the next page)
LED projector E-Manual
43
Accessories
Two USB Type A to micro USB Type B cables, micro
USB to micro USB cable, USB Type C OTG, projector
cover, power adapter, AC plug, warranty card,
quick start guide
Regulation
Approvals
CB, CE, FCC, VCCI, CU, C-Tick, CCC, PSE, IEC62471,
CEC
NOTE:
• Specifications are subject to change without prior notice.
• Product availability may vary by region.
• All brand and product names mentioned are trademarks of their
respective companies.
44
LED projector E-Manual