Designer Cut Series- AcousticPro 1080P3
Acoustically Transparent Projection Material
Care & Use
Proper care and use of the AcousticPro1080P3 will maximize the life of the material to
bring you years of enjoyment.
Projection Side
The AcousticPro1080P3 material has a very similar look on both sides. Please take note of
the label on the material. It will be labeled front or projection side. If the label happens to
not be found, you can identify the front side by the matte side. The back side will appear a
bit shinny.
Material Maintenance
The material may have minor wrinkles which will get removed after stretching it tightly
over a frame or a mounting system that allows tensioning. You can also use a handheld
fabric steamer to remove wrinkles or creases.
A feather duster should be used to remove loose dirt or dust. Use warm water with a
toothbrush to clean dirt or dust spots. Do not use soap as it will stain the material.
Quick Tip
For best picture quality results, maintain a minimum viewing distance if possible 1.5
times the width of your projection image.
For more information, visit
135 nal
Rev. 110116-BR
The 135” size listed for this series is
referring to the diagonal measurement of
the screen material.