Installatie handleiding Dahua speeddome

Dahua 2-inch HDCVI Speed Dome Installation Manual
Dahua 2-inch HDCVI Speed Dome
Installation Manual
Version 1.0.0
Dahua Technology CO., LTD
Dahua 2-inch HDCVI Speed Dome Installation Manual
Table of Contents
1
HDCVI SPEED DOME INSTALLATION .............................................................. 1
1.1
Installation Environments ..................................................................................................................... 1
1.2
Check installation space and installation location intension ........................................................... 1
1.3
Please keep all package material well for future use ....................................................................... 1
2
SETUP BEFORE INSTALLATION ...................................................................... 2
2.1
Check Accessories ............................................................................................................................. ... 2
2.2
Open Device ............................................................................................................................. .............. 2
2.3
Installation Position Map ....................................................................................................................... 2
2.4
Dial Switch Setup................................................................................................................................... 3
2.4.1
Initial Setup ........................................................................................................................................ 3
2.4.2
Dial Setup for Intelligent Speed Dome .......................................................................................... 3
2.4.3
HD/SD Video Output Switch Setup ................................................................................................ 3
2.4.4
Speed Dome Address Setup ........................................................................................................... 3
3
CAMERA INSTALLATION .................................................................................. 5
3.1
Component Installation ......................................................................................................................... 5
3.2
Installation Steps ................................................................................................................................... 5
4
3.2.1
Installation Environments ................................................................................................................. 5
3.2.2
Installation Steps ............................................................................................................................... 6
APPENDIX Ⅰ LIGHTENING PROTECTION AND SURGE PROTECTION .......... 7
i
Dahua 2-inch HDCVI Speed Dome Installation Manual
5
APPENDIX Ⅱ12V DC WIRE GAUGE AND TRANSMISSION DISTANCE
RELATIONSHIP SHEET ............................................................................................ 8
6
APPENDIX Ⅲ WIRE GAUGE REFERENCE SHEET .........................................9
ii
Dahua 2-inch HDCVI Speed Dome Installation Manual
Welcome
Thank you for purchasing our speed dome!
Please read the following safeguards and warnings carefully before you install or use the
product!
iii
Dahua 2-inch HDCVI Speed Dome Installation Manual
Important Safeguards and
Warnings Safety Measures
1. Qualified Engineer Needed

The installation engineer or maintenance engineer shall have
corresponding CCTV system
installation
certificate
or
maintenance
qualification
certificate.


The installation
engineer or maintenance engineer shall have qualification certificate for
work
at
height.


The installation engineer or maintenance engineer shall have the basic knowledge and
 operation technique for low-voltage cable layout and low-voltage electronic cable connection.


 Please read the installation manual carefully and keep it well for future reference,

We are not liable for any problems caused by unauthorized modifications or attempted repair.

2. Lifting Appliance Requirement

Please select the proper speed dome installation mode and use the lifting appliances at
 the safety environment.


 The lifting appliances shall have the enough capacity to reach the installation height.

The lifting appliances shall have safe performance.

The precaution measures include two types: Warning and Note.

 Warning: It is to alert you there is an optional risk of death or series injury!

Note: It is to alert you there is an optional risk of damage or property loss!

Warning
1.
2.
3.
4.
5.
6.
All installation and operation here should conform to your local electrical safety codes.
We assume no liability or responsibility for all the fires or electrical shock caused by
improper handling or installation.
Be sure to use all the accessories (such as power adapter) recommended by manufacturer.
Do not connect several speed domes to one power adapter. It may result in overheat or
fire if it exceeds the rated load.
Avoid aiming the lens at the strong radiation source directly (such as sun, laser, molten steel
etc); in case it may cause unrecoverable damage to the thermal imaging detector. What’s
worse, it may cause severe damage to the detector.
Avoid oil stain and kinds of chemicals tarnishing and damaging the lens surface.
Store the device in a cool and dry place where there is ventilation but no intense
iv
Dahua 2-inch HDCVI Speed Dome Installation Manual
7.
8.
9.
electromagnetic field.
Violent vibration or crash is not allowed during transportation and application.
Before you connect the cable, install or uninstall, or begin the daily maintenance
work, please turn off the power and unplug the power cable.
Please make sure the produce is secure firmly on the wall or the ceiling.
10. Please turn off the power and unplug the power cable, If there is any smoke, disgusting
smell, or noise. Please contact your local retailer or customer service centre for help.
11. All the examination and repair work should be done by the qualified service engineers. We
are not liable for any problems caused by unauthorized modifications or attempted repair.
Note
1. Safety Transportation

Heavy stress, violent
 vibration or water splash are not allowed during transportation, storage
and installation.

 This series product must use split type package during the transportation.

We are not liable
 for any damage or problem resulting from the integrated package during the
transportation.
2. When device is malfunction
Shut down the device and disconnect the power cable immediately if there is smoke, abnormal
smell or abnormal function. Please contact your local retailer ASAP.
3. Do not try to dismantle or modify the device

 There is risk of personal injury or device damage resulting from opening the shell.



Please contact your local retailer if there is internal setup or maintenance requirement.


We are not liable for any problems caused by unauthorized modifications or attempted repair.
4. Do not allow other object falling into the device

 Please make sure there is no metal or inflammable, explosive substance in the speed dome.



The above mentioned objects in the device may result in fire, short-circuit or damage.

shut down the device and disconnect the power cable if 
there is water or liquid
 Please
falling into the camera. Please contact your local retailer ASAP.

Please pay attention to the camera. Avoid the sea water or rain to erode the camera.

5. Handle carefully
Do not allow this series product fall down to the ground.
Avoid heavy vibration.
6. Installation Environment Requirement

This series speed dome should be installed 
in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
v
Dahua 2-inch HDCVI Speed Dome Installation Manual

This series product shall be away from the strong electromagnetism
 radiant, please keep it
away from wireless power, TV transmitter, transformer and etc.
7. Daily Maintenance

use the soft cloth to clean dust on the shell, or you canuse soft cloth with cleaning
 Please
liquid to clean the shell and then use soft cloth to make it dry.

Do not use gasoline, dope thinner or other chemical material to clean the shell. It may result
 in shell transfiguration or paint flake.

Do not allow
the plastic or rubber material to touch the shell for a long time. It may result in
paint flake.
vi
Dahua 2-inch HDCVI Speed Dome Installation Manual
1 HDCVI SPEED DOME INSTALLATION
1.1 Installation Environments
Basic Requirement

 All installation and operation here should conform to your local electrical safety codes.

Before installation, please open the package and check all the components are included.
Please make sure the speed dome installation environment and installation mode can meet
your requirement. If there is special requirement, please contact your local retailer for more
 information.

We assume no liability or responsibility
 for all the fires or electrical shock caused by
improper handling or installation.
1.2 Check installation space and installation location intension
Please make sure the installation environment has enough space to install the speed dome and
its corresponding bracket.
Please make sure the ceiling, wall and the bracket can support the speed dome and its
corresponding installation component. It shall sustain the 8X weight of the speed dome.
1.3 Please keep all package material well for future use
Please keep speed dome package material well in case you need to send it back to your local
retailer or manufacturer for maintenance work.
Non-original package material may result in device damage during the transportation.
1
Dahua 2-inch HDCVI Speed Dome Installation Manual
2 SETUP BEFORE INSTALLATION
2.1 Check Accessories
Before the installation, please check the accessories one by one according to the packing list.
Please make sure all the components listed are included. (Please check the container list for
details.)
2.2 Open Device
Remove the package and then take out the device. See Figure 2-1.
Figure 2-1
2.3 Installation Position Map
The installation position map is used for drilling positioning on the ceiling and outlet position. See
Figure 2-2.
Figure 2-2
2
Dahua 2-inch HDCVI Speed Dome Installation Manual
2.4 Dial Switch Setup
Open the enclosure of the speed dome, you can see there are two dial switches on the PCB,
which are used to set the parameters of the speed dome, such as address, high definition
and standard definition video output switch and etc. Note:
When it is the HDCVI high definition video output mode for the speed dome, then it doesn’t have
to implement dial and other relevant RS485 settings.
2.4.1 Initial Setup
Address code: 1
Baud Rate: 9600
Parity: None
2.4.2 Dial Setup for Intelligent Speed Dome
Before you control the speed dome, first you have to set the address code and high definition
standard definition video output mode; the speed dome will respond to its control command
after completing these settings.
There are two dial switches on the PCB, which is shown in Figure 2-3. The 1~7 of the address
dial switch are valid. You can set address and high definition standard definition video output
switch and etc according to the method below. After resetting relevant info, it has to enter OSD
system to reboot first and then the new settings will take effect.
Figure 2-3
2.4.3 HD/SD Video Output Switch Setup
The speed dome can use dial switch to set HD/SD video output switch, please refer to the sheet
2-1 for more details.
1
2
HD/SD Video Output Switch
OFF
ON
OFF
ON
OFF
OFF
ON
ON
HD Output
SD Output
Reserve
HD/SD Self-adaptation Output
Sheet 2-1
2.4.4 Speed Dome Address Setup
3
Dahua 2-inch HDCVI Speed Dome Installation Manual
The speed dome can use dial switch to set address number, encoding mode adopts binary
coding. 1~7 bit are valid bit, the highest address bit is 127, refer to the following sheet for
the setting method of address number.
Address
1
2
3
4
5
6
7
1
OFF
OFF
OFF
OFF
OFF
OFF
OFF
1
ON
OFF
OFF
OFF
OFF
OFF
OFF
2
OFF
ON
OFF
OFF
OFF
OFF
OFF
3
ON
ON
OFF
OFF
OFF
OFF
OFF
4
OFF
OFF
ON
OFF
OFF
OFF
OFF
5
ON
OFF
ON
OFF
OFF
OFF
OFF
6
OFF
ON
ON
OFF
OFF
OFF
OFF
7
ON
ON
ON
OFF
OFF
OFF
OFF
……
…………………………………………………………………………
126
OFF
ON
ON
ON
ON
ON
ON
127
ON
ON
ON
ON
ON
ON
ON
Sheet 2-2
4
Dahua 2-inch HDCVI Speed Dome Installation Manual
3 CAMERA INSTALLATION
2-inch HDCVI speed dome mainly adopts ceiling mount mode, which can be installed on
the ceiling or wall.
3.1 Component Installation
The installation of pedestal seal ring is shown in Figure 3-1.
Figure 3-1
The ceiling mount speed dome is shown in Figure 3-2.
Figure 3-2
3.2 Installation Steps
3.2.1 Installation Environments
The ceiling mount speed dome can be installed in the hard construction ceiling in the indoor
environment. Before the installation, please make sure:

The ceiling is thick enough to install the expansion bolt.

5
Dahua 2-inch HDCVI Speed Dome Installation Manual


The ceiling can at least sustain the 8x weight of the speed dome.
3.2.2 Installation Steps
Note: There are two outlet modes for ceiling mount installation.
Don’t drill hole on the ceiling, and open wire outlet from the side of the speed dome.
Drill hole on the ceiling, and concealed wire outlet from the ceiling.
Step 1
Install the default pedestal seal ring of the speed dome on the pedestal according to the way
shown in Figure 3-1.
Step 2
Confirm installation position and outlet mode first, dig holes on the ceiling according to the
installation position map, and then put the three plastic expansion bolts into the holes you just
dug.
Step 3
Unscrew three locking screws on the enclosure by using inner hex wrench, and remove
the enclosure.
Step 4
Lay the outgoing line according to the outlet mode, and use three self-tapping screws to fix the
pedestal on the installation surface, and insert the screws into the expansion bolts.
Step 5
Adjust the lens to proper monitoring position according to the direction shown in Figure 3-1.
Step 6
Use three locking screws to fix the dome enclosure on the pedestal.
So far, the camera installation and cable connection are completed, and you can check device
monitoring view via back-end encoding device.
6
Dahua 2-inch HDCVI Speed Dome Installation Manual
4 APPENDIX Ⅰ LIGHTENING PROTECTION AND SURGE
PROTECTION
This series speed dome adopts TVS lighting protection technology. It can effectively prevent
damages from various pulse signals below 2000W, such as sudden lighting and surge. While
maintaining your local electrical safety code, you still need to take necessary precaution
measures when installing the speed dome in the outdoor environment.

The distance between the signal transmission
 cable and high-voltage device (or highvoltage cable) shall be at least 50 meters.

 Outdoor cable layout shall go under the penthouse if possible.

vast land, please use sealing steel tube under the land to implement
 cable layout and
 For
connects one point to the earth. Open floor cable layout is forbidden.

In area of strong thunderstorm hit or near high sensitive voltage (such as near high-voltage
transformer substation), you need to install additional high-power thunder protection device
 or lightning rod.

The thunder protection and earth of the outdoor device and cable shall be considered in the
 building whole thunder protection and conform to your local national or industry standard.

System shall adopt equal-potential wiring. The earth device shall meet anti-jamming and at
the same time conforms to your local electrical safety code. The earth device shall not short
circuit to N (neutral) line of high voltage power grid or mixed with other wires. When connect
the system to the earth alone, the earth resistance
 shall not be more than 4Ω and earth
cable cross-sectional area shall below 25 mm2.
7
Dahua 2-inch HDCVI Speed Dome Installation Manual
5 APPENDIX Ⅱ12V DC WIRE GAUGE AND TRANSMISSION
DISTANCE RELATIONSHIP SHEET
The recommended max transmission distance is under the following environments: The wire
diameter is fixed and the DC 12V power voltage loss rate is below 10%. For the device of DC
power supplying, the max allowed voltage loss rate is 10%. All the wires listed in the following
sheet are copper wire. (Copper wire resistance
)
mm
Feet(m)
0.8000
1.000
1.250
2.000
w
5
122.13
(37.23)
190.83(58.16)
298.17(90.88)
10
61.06(18.61)
95.41(29.08)
149.08(45.44)
15
40.71(12.41)
63.61(19.39)
99.39(30.29)
763.31
(232.66)
381.66
(116.33)
254.44(77.55)
20
30.53(9.31)
47.71(14.54)
74.54(22.72)
190.83(58.16)
25
24.43(7.45)
38.17(11.63)
59.63(18.18)
152.66(46.53)
30
20.35(6.20)
31.80(9.69)
49.69(15.15)
127.22(38.78)
35
17.45(5.32)
27.26(8.31)
42.60(12.98)
109.04(33.24)
40
15.27(4.65)
23.85(7.27)
37.27(11.36)
95.41(29.08)
45
13.57(4.14)
21.20(6.46)
33.13(10.10)
84.81(28.85)
50
12.21(3.72)
19.08(5.82)
29.82(9.09)
76.33(23.27)
55
11.10(3.38)
17.35(5.29)
27.11(8.26)
69.39(21.15)
60
10.18(3.10)
15.90(4.85)
24.85(7.57)
63.61(19.39)
65
9.39(2.86)
14.68(4.47)
22.94(6.99)
58.72(17.90)
70
8.72(2.66)
13.63(4.15)
21.30(6.49)
54.52(16.62)
75
8.14(2.48)
12.72(3.88)
19.88(6.06)
50.89(15.51)
80
7.63(2.33)
11.93(3.64)
18.64(5.68)
47.71(14.54)
85
7.18(2.19)
11.23(3.42)
17.54(5.35)
44.90(13.69)
90
6.78(2.07)
10.60(3.23)
16.56(5.05)
42.41(12.93)
95
6.43(1.96)
10.04(3.06)
15.69(4.78)
40.17(12.25)
100
6.11(1.86)
9.54(2.91)
14.91(4.54)
38.17(11.63)
8
Dahua 2-inch HDCVI Speed Dome Installation Manual
6 APPENDIX Ⅲ WIRE GAUGE REFERENCE SHEET
Metric bare wire
diameter
(mm)
0.050
AWG
SWG
0.060
0.070
0.080
0.090
0.100
0.110
0.130
43
42
41
40
39
38
37
36
47
46
45
44
43
42
41
39
0.140
0.160
0.180
0.200
0.230
0.250
0.290
0.330
0.350
0.400
0.450
0.560
0.600
0.710
0.750
0.800
0.900
1.000
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
/
37
/
35
/
33
31
30
29
28
/
24
23
22
/
21
20
19
0.01539
0.02011
0.02545
0.03142
0.04115
0.04909
0.06605
0.08553
0.09621
0.1257
0.1602
0.2463
0.2827
0.3958
0.4417
0.5027
0.6362
0.7854
1.250
1.500
16
15
18
/
1.2266
1.7663
2.000
2.500
3.000
12
/
/
14
/
/
3.1420
4.9080
7.0683
9
Bare wire cross
section
(mm2)
0.00196
0.00283
0.00385
0.00503
0.00636
0.00785
0.00950
0.01327
Dahua 2-inch HDCVI Speed Dome Installation Manual
Note


This manual is for reference only. Slight difference may be found in the user
interface.

All the designs and software here are subject to change without prior written
notice.

All trademarks and registered trademarks are the properties of their respective
owners.







If there is any uncertainty or controversy, please refer to the final explanation of us.

Please visit our website or contact your local service engineer for more
information.

Dahua
Technology CO., LTD.

Address:No.1199
Bin’an Road, Binjiang District, Hangzhou, PRC.

Postcode:
310053

Tel:
+86-571-87688883

Fax:
+86-571-87688815

Email:overseas@dahuatech.com

Website: www.dahuasecurity.com

































10