triton led series - Barron Lighting Group

TRITON LED SERIES
LED General & Emergency Lighting
FEATURES
•Contemporary, low-profile, streamlined, die-cast aluminum housing
Model:
•Utilizes a long lasting, energy efficient, ultra-bright white 11w,
5000K CCT LED
Job Name:
Date:
Accessories:
Type:
•1080 lumen output in AC mode; 260 lumen output in emergency mode
•Switchable AC operation for use as dusk to dawn with photocontrol option
or use of a normally open switch
•External LED status indicator and test button
•Guardian Self-Test/Self-Diagnostics (G2) standard
•Mirrored reflector for enhanced light output
•UL 94-5VA flame retardant polycarbonate components
•UV stabilized, vandal resistant, polycarbonate lens
•Suitable for wet or damp location
•A 1/2 inch NPT threaded conduit opening is provided at the top of the
enclosure and sealed with a closure plug
•Optional cold weather package (-20°C to 50°C)
•Quick connect mounting back plate
•Low voltage disconnect eliminates deep discharge
•Maintenance-free NiCad battery
•UL listed 90 minute emergency run time, 24 hour recharge time
•Standard finish: Bronze, Silver, White, Black
•120/277V dual primary, 60Hz input
WARRANTY
Any component that fails due to manufacturers defect is guaranteed for 3
years with a separate 2 year pro-rated warranty on the battery. The warranty
does not cover physical damage, abuse or instances of uncontrollable
natural forces. See the full Exitronix warranty document for detailed
information.
3/ 2
WARRANTY
ORDERING INFORMATION Example: TRL-ACEM-BR-CL
Series
Product Category
Finish
Options (Factory Installed)
TRL
ACEM = Normally on with Emergency Lighting
BR = Dark Bronze
CL = Cold Location Package
SA = Silver
WH = White
BL = Black
EMERGENCY LIGHTING ONLY MODELS (Available While Supplies Last)
Model
Description
TRL-EM-BR
Indoor/Outdoor Architectural Die Cast LED Emergency Light, Self Test/Self-Diagnostics, Dark Bronze Finish
TRL-EM-SA-CL
Indoor/Outdoor Architectural Die Cast LED Emergency Light, Self Test/Self-Diagnostics, Listed From 0°C - 50°C, Satin Aluminum Finish
CONSTRUCTION
Our Triton LED series offers a decorative, low-profile, architectural
design with die-cast aluminum housing and durable powder coat finishes
in white, silver and dark bronze. The Triton LED series can be switched
on and off by the integrated photocontrol or by a normally open switch
while maintaining UL 924 compliance. The unit features a fully sealed
and gasketed enclosure for damp and wet location applications.
CONFORMANCE TO CODES & STANDARDS
The Triton LED Series is UL listed and meets or exceeds the following:
UL 924, NEC requirements and NFPA 101.
DIMENSIONS
6.54"
ILLUMINATION
Units come standard with a single 11 watt high performance LED
featuring 1080 lumens in AC mode and 260 lumens in emergency back
up mode, 5000K CCT and a CRI of 70. Features a UV stable mirrorbright reflector and prismatic polycarbonate refractor for ideal light
output.
10.47"
3.78"
ELECTRICAL
Input
Dual-voltage input 120 or 277VAC @ 60Hz.
Nickel Cadmium Battery - NiCad (With Battery Only)
Exitronix NiCad batteries are maintenance-free with a life
expectancy of 15 years. NiCad batteries offer high discharge
rates and continue to perform in a vast temperature range from
32°F to 104°F (0°C to 40°C).
SPACING GUIDE (AC MODE)
Emergency
The Triton LED will operate for a minimum of 90 minutes during a loss of
power with a 24 hour maximum recharge time for the battery.
Low Voltage Disconnect
Low Voltage Disconnect (LVD) measures the battery terminal voltage.
The LVD continuously monitors the battery terminal voltage and if it
should fall below a preset voltage threshold, the LVD will disconnect
the load. When the battery is recharging and voltage is raised above
another preset voltage threshold, the load is automatically reconnected.
Test Button
The test button is easy to locate and provides manual verification of the
transfer circuit and emergency lamps.
INSTALLATION
Universal J-box mounting pattern or surface wiring thru the top conduit
power feed make installation quick and easy.
Wet Location Rated (Standard)
Wet location rated fixture that allows water or other liquids to drip, splash
or flow on or against. The construction prevents the accumulation of
water on live parts.
30’
9‘
1 FC
e
g
Avera
6‘
NOTE:
Minimum luminance of 0.1 FC and average luminance of 1.0 FC.
Illustration shown is a guideline for center–to-center with 9 ft mounting
height.
Guardian Self-Test/Self-Diagnostics
The Guardian provides self-testing and self-diagnostic capabilities to the
unit equipment.
At predetermined intervals, the unit equipment will automatically switch
into battery mode. The unit equipment will also perform various selfdiagnostic tests of the unit. Visual signaling will alert maintenance
personnel to a fault of the unit equipment electronics, emergency
lamp(s), battery and/or battery charger. The circuitry continuously
monitors the operating condition of the unit equipment and battery
charging circuit/battery supply voltage.
The unit equipment will automatically switch to battery mode every 28
days for a period of 1 minute. The unit equipment will automatically
switch to battery mode every 6 months for a period of 30 minutes.
Specifications are subject to change without notice.
Installation must be performed in accordance with
Barron Lighting Group installation instructions.
10800164 11/17
800.533.3948 • www.barronltg.com