advertisement
10x • 60x • 120x • 220x
*
C 2 D Digital Microscope
*
C 2 D Camera Stand
*
USB Cable (5ft. or 1.5m )
*
Software (CD-ROM)
*
Six Prepared Slides with Case
*
Dissecting Tools
*
Instruction Manual
WARNING!
Only for use by children over 10 years old. Only for use under the supervision of an adult. This toy contains functional sharp needle, sharp edge on scalpel, scissors, spatula, tweezers, and prepared slide.
CAUTION!
Read the instructions before use, follow them and keep them for reference.
Congratulations for purchasing the C 2 D Digital Microscope, one of the newest learning tools!
ABOUT THE
D DIGITAL MICROSCOPE
This C 2 D digital Microscope will encourage creative play activities that are directed by your children by harnessing the power of your PC. With the C surroundings in a way as never before and share these findings with friends and family. There are many benefits from using the C 2
2 D Digital Microscope, you will be able to explore your
D Digital Microscope and some are:
• Use software to manipulate images in numerous and insightful ways
• Create shows with video recording features
• View the images with your friends on the computer
About this manual
This manual is being designed so that the information is easy and ready to find in order to make setting up your microscope simple and less frustrating.
This instruction manual helps to you:
• Set up your C 2 D Digital Microscope
• Maintain it
• Change bulb when required
• Troubleshoot any problems that arise
T
ABLE OF
C
ONTENTS
Basic Components
Detailed Components
System Requirements
System Support
Software Installation
1
2
3
3
4 - 7
Using the C 2 8
9
Using the C 2
Using the C 2
9
D Software
Care & Maintenance
Troubleshooting
10-12
13
14
* TRADEMARKS:
Microsoft Office 97, Office 2000, Windows 2000, Windows XP, NetMeeting, Windows 98 TM ( 2 nd Edition),
Windows Me and DirectX are registered trademarks of Microsoft Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Adobe and PhotoShop are registered trademarks of Adobe Corporation.
B
ASIC
C
OMPONENTS
C A M E R A a
C
D Camer
Configu rable Microscope basement
USB cable (1.5m long)
Instruction manual
Software (CD-ROM)
Six prepared slides
Seven Scientific Instruments
!
ears old.
Only for use under the super needle,
sharp edge on scalpel,
Only for use by children over 10 y adult.
This to prepared slide.
CAUTION!
Read the instructions before use, them for reference.
w th
follo em and keep vision of an
scissors and
1
Focus
Knob
USB Cable
D
ETAILED
C
OMPONENTS
C A M E R A
C 2 D CAMERA
Shutter Button
Focus Adjustment
Handheld Unit
Revolving Turret Ring
Light
Compartment
2
C 2 D Digital Microscope Arm
Color Filter / Aperture
Your Package contains:
1. C
2. C
2
2
D Digital Microscope
D Camera Stand
3. USB Cable (5 ft. or 1.5m)
4. Software (CD-ROM)
5. Prepared Slides (6) with Case
6. Stainless Steel Spatula
7. Stainless Steel Scissors
8. Stainless Steel Tweezers
9. Stainless Steel Needle
10. Stainless Steel Scalpel
11. Stirring Rod
12. Dropper
13. Instruction Manual
S
YSTEM
R
EQUIREMENTS
• A computer that is USB capable
• Windows 98 TM (2nd Edition), Me Windows ® 2000 Professional and Windows XP
• Intel ® Pentium TM 200 MHz or faster
• 64 MB RAM
• Minimum 75 MB free hard disk space
• Sound and Video that are compatible with Microsoft ® DirectX ® 8.0 or up
• Quad speed (4x) or higher CD-ROM
• 800x600 display resolution, 16 bit colour
• 16-bit windows compatible sound device
• Mouse and Keyboard
S
YSTEM
S
UPPORT
This C2D Digital Microscope supports* Microsoft ® Video for Windows ® (VFW). You can use third party software that supports VFW to access this product. This C2D Digital Microscope also supports* Microsoft
NetMeeting. You can preview your pictures via the Internet with your friends!
Please check Microsoft ® web site http://www.microsoft.com for details.
* Feature only available on computer running Windows 98 TM (2nd Edition) or Me.
3
The installation of the software consists two steps:
STEP ONE - Device driver installation
STEP TWO - C 2 D software installation
1. Insert the CD-ROM into the CD-ROM drive, the setup program will be activated automatically.
NOTE: Clicking the button will skip to STEP TWO - Install the C 2 D Software.
Next Cancel
STEP ONE - Install Device Driver
NOW CONNECT THE C 2 D DIGITAL MICROSCOPE ™ TO THE COMPUTER
2. After connecting the C 2 D Digital Microscope to the computer, you will see a "new hardware found" message.
Next Cancel
Next Cancel
4
Back Next Cancel
Next Cancel
Back Next Cancel
Next Cancel
5
For Windows 2000 or XP:
A pop - up window will appear when the
C 2 D device driver is being installed, please click
Back Next > Cancel
Next Cancel
6. Once the new hardware device has
been installed properly, please proceed
to step two to install the C 2 D software.
Once the hardware has been installed
properly, click the button to
finish the device driver installation.
Finish Cancel
Next Cancel
6
USING THE C 2 D SOFTWARE, continued
STEP TWO - Install the C
2 dfasdasd
D Software
Next Cancel
1. Click the button to finish the application
software installation.
Finish
2. Once the software has finished installation,
click the button. You can now run
the C 2 D software.
NOTE: The setup program will take a while to install Microsoft ® DirectX ® 8.0 components.
It does not mean that your computer has crashed. You might have to restart your computer.
7
D
U
SING THE C
IGITAL
M
ICROSCOPE
Setup Suggestion
Please remember that the C 2 D Digital Microscope can be used in the handheld mode, so make sure that the work area is free from obstruction and the monitor is viewable.
Controls
Learning the C 2 D controls
Once you have the C 2 D software installed and running, you can use the controls to focus, change magnification and capture picturess/movies.
Focus Knob
Shutter Button
Revolving Turret Ring
Focus Adjustment
Color Filter / Aperture
Focusing – 1. Focus the image on the screen with the focusing knob.
2. You should be able to see the image become closer or further away as the focus knob is adjusted very slowly.
NOTE : This image on the screen will have a delay. Turn the focus knob slowly and wait for the image to refresh before adjusting again.
Changing Magnification – Change the magnification of the image by turning the Revolving Turret Ring.
Changing Color Filter – Different specimen effect can be displayed by rotating the Color Filter/Aperture.
Taking Images – Images on the screen can be captured (recorded) by pressing the Shutter Button.
Lighting – The light can be turned on or off through the software.
8
U
M
SING
H
ANDHELD
ICROSCOPE
M
ODE
Focusing – The handheld unit itself can be used to focus by moving the unit closer or further from the object
NOTE : This image on the screen will have a delay. Turn the focus knob slowly and wait for the image to refresh before adjusting again.
Changing Magnification – Change the magnification of the image by turning the Revolving Turret Ring.
Taking Images – Images on the screen can be captured by pressing the Shutter Button.
Focusing – Focus the image by turning the Focus Adjustment.
Taking Images – Images on the screen can be captured (recorded) by pressing the Shutter Button.
9
C
2
D Main Studio
U
SING THE C
S
OFTWARE
Light Contrast
Delete
Light
Press button to turn the light on/off.
Contrast
Move the tap left and right to adjust the contrast.
Take Image
Press button to capture the current image to "My records".
Make Video
Press button to start making video to "My records".
NOTE: Press this button again to finish recording.
My records
Images
A list of images have been saved in your hard disk. You can select the record and view them from the lmage Viewer.
Videos
A list of videos have been saved in your hard disk. You can select the record and playback them from the Video Viewer.
Delete
Click button to delete current selected record from the list.
10
USING THE C 2 D SOFTWARE, continued
Image Viewer
Copy to clipboard
Click button to print out the image from the printer.
NOTE: It would not have any effect unless you have installed the appropriate printer driver.
Copy to clipboard
Click button to copy the image to the clipboard.
TIPS: You can utilize this feature to process the image further from the other software such as Adobe ®
PhotoShop ® . You can also use Microsoft ® Office to make your own presentation.
11
USING THE C 2 D SOFTWARE, continued
Video Viewer
Stopped
Seek Bar
Position the mouse pointer on the Seek Bar . You can locate frames directly without playing the whole video sequentially.
Play
Click button to start playing the video.
Stop
Click button to stop immediately.
Pause
Click button to suspend playing the video.
12
C
ARE &
M
AINTENANCE
Bulb Replacement
Use a Philips screw driver to open the light compartment.
Bulb Specification: 2.2V DC 150mA
13
T
ROUBLESHOOTING
MESSAGE
The C 2 D Digital Microscope is not connected to the computer.
Video recording feature is not available.
SOLUTION
Connect the C 2 computer.
D Digital Microscope to the
If the problem still exists, you have to remove the C 2 D Digital Microscope device driver and install it again. (Please consult Windows ® User
Guide).
Reinstall the C 2 D software.
Out of memory.
Please exit other software to free up more memory.
Cannot turn on the light.
Please refer to the section "Care & Maintenance" to replace the bulb.
Error found when loading image into the memory.
Run ScanDisk to check your hard disk for logical and physical errors. ScanDisk can then repair the damaged areas of your hard disk.
Your computer does not have a default printer.
Cannot initialize clipboard.
Please check your computer whether an appropriate printer is installed onto your computer.
Please exit other software to free up more memory.
Support e-mail address: [email protected]
14 P38-MS288-810010001
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement