Disassembly and Recycling Document

Disassembly and Recycling Document
P.1
Disassembly Time:10min / No Special Training Required
Model: Sava
*Refer to P.2 for model variations
Tools Required
safety glasses
phillips screwdriver
mallet
utility knife
m3 hex key (Stylex tool)
m6 hex key (Stylex tool)
Breakdown Steps
1. First, flip the chair and remove the two
screws towards the back of the seat
locking it to the mechanism. While
holding the lever up, pull the seat
forward off the mechanism.
- Back and seat
- Material:
Plastic, plywood, upholstery
A
- Upholstered seat
- Material:
Foam, plastic, upholstery
2. Unzip the back cover and locate four
bolts though the netting attaching it
to the arm castings. If scrapping the
back, cut the upholstery open for
easier disassembly. Loosen them with
the m6 ratchet or m3 if mesh and slide
the back up off the castings (this is a
specific tool provided by Stylex).
B
3. Flip the chair and remove the bolts
connecting the arms to the mechanism
using the m3 ratchet (this is a specific
tool provided by Stylex). Holding the
mechanism firmly, hammer the arm
loose with a mallet.
C
4. Hammer the base off the cylinder by
holding the base firmly upside down off
the table and hitting the bottom of the
cylinder with a mallet. Using moderate
force, pull the casters off the base. If
stuck, use the mallet.
www.stylexseating.com
- M6 hex key bolt (m3 if mesh) x4
- Material: Steel
- Arms & castings
- Material: Aluminum w/
steel insert and hardware
- M3 hex key bolt x2
- Material: Steel
- Cylinder and mechanism
-Aluminum, steel, nylon, ABS
-Five-star base
-Material: Aluminum
D
- Casters
- Material: Nylon, steel
800.257.5742
x5
Disassembly Sava
Disassembly and Recycling Document
Disassembly Time:10min / No Special Training Required
Models: Sava, Sava Mesh, Save Mesh Back
Chair Variations
Sava
Sava has 2 types of arm designs to choose from.
A1
A2
B1
B2
C1
C2
P.2
-Adjustable P.U. foam task arms(figure A1).
-Fixed loop conference arms with ABS caps (figure
A2).
Disassembly for the both are the same and can be
found on P1.
Sava Mesh
The Sava Mesh features its seat and back being
mesh. Like the original it has two arm choices .
- Adjustable P.U. foam task arms (figure B1).
- Fixed loop conference arms with ABS caps (figure
B2).
Disassembly is identical to the original with the
exception of the different materials.
Sava Mesh Back
The Sava Mesh Back features a mesh back but
with a foam seat. Like the original it has two arm
choices.
- Adjustable P.U. foam task arms (figure C1).
- Fixed loop conference arms with ABS caps (figure
C2).
Disassembly is identical to the original with the
exception of the different materials.
www.stylexseating.com
800.257.5742
Disassembly Sava