C ookie
User Manual
BC
Cookie
Please follow the instruction
in this guide to enjoy the best sound.
C ookie
User Manual
Hold "O" button to power on and off
Press "O" button to play/pause music
(for compatible bluetooth device/app)
Press "O" button for 2 seconds to activate
Bluetooth discovery mode.
TI
Quickly press "O" button twice to disconnect
existing Bluetooth connection and return to
discovery mode.
C
Co
ok
ie
Use "line in" to connect any audio device via a 3.5mm cable. Speaker will
automatically switch to AUX mode if a device is connected. Speaker will
automatically switch back to Bluetooth mode once the device is disconnected.
Use "line out" to output music to any headphone or audio receiver. The speaker
will work as a Bluetooth receiver whenconnected. The speaker will be muted
when a headphone/receiver is connected to the "line out".
While connected to a smartphone in Bluetooth mode, you can short press
the "O" button to answer any incoming call and longpress the "O" button to
refuse. While talking, short press the "O"button to end the call.
Press the buttons to decrease or increase volume.
Connect speaker via USB cable to any power source (USB charger,
powerbank, laptop, etc.) to charge battery.
Magnetic Mount
You can conveniently mount the
speaker on any flat metallic surface
using the magnetic mount on the
back of the speaker.
Cookie/BD1
4.8" 1.6"
Product: Bluetooth Speaker
2.0 Stereo
8W
1A
Audio out for headphone
or receiver
AUX IN 3.5mm
Battery Capacity:
2200mAh
IMPORTANT SAFETY INSTRUCTIONS:
1)Read these instructions.
2)Keep and follow all instructions.
3)Heed all warnings.
4)For indoor products, do not use this apparatus near water. For outdoor products, please do
not expose apparatus to water longer than its intended time and level. The apparatus is no
longer water resistant if the charging/connection port cover is opened. Please ensure the port
cover is closed tightly if used near water.
5)Clean only with a dry cloth.
6)Do not install this apparatus near any heat sources such as radiators, heat registers,
stoves or other apparatus (including amplifiers) that produce heat.
7)Do not block any ventilation openings. Install this apparatus in accordance with the
manufacturer's instructions.
8)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A ground-type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
9)Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
10)Use only attachments and accessories specified by the manufacturer.
11)Unplug this apparatus during lightning storms or when unused for long periods of time.
12)Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as when the power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus
had been exposed to rain or moisture, does not operate normally or has been dropped.
13)Do not expose this apparatus to dripping or splashing, and ensure that no objects filled
with liquids, such as vases, are placed on the apparatus.
14)To disconnect this apparatus from the AC mains completely, disconnect the power supply
cord plug from the AC receptacle.
15)The mains plug of the power supply cord shall remain readily operable.
16)Do not expose batteries to excessive heat such as sunshine, fire, or the like.
17)This is not a children's product and is not intended for use by children under 14 years old.
CAUTION:
Risk of Electric Shock. Do Not Open.
The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to
while port cover is opened for charging or connection.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note 1:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Note 2:
1.Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
2. This equipment should be installed and operated with a minimum distance of 20 cm between
the device and your body.