Model:
CTOS-Q
Part #: 300-05835
REPLACEMENT CARTRIDGE
Foodservice Filtration Systems
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
Snapshot
The CTOS-Q is a 15” Qwik-Twist cartridge that reduces
sediment down to 0.5 micron and reduces chlorine, taste
& odor at a flow rate of 2.25 gpm for 22,500 gallons. The
cartridge includes IsoNet®, OptiPure’s patented scaleinhibiting technology, which delivers consistent protection
against the precipitation and accumulation of scale and
provides a protective barrier to help guard against corrosion.
Cartridge Benefits
l
l
l
l
l
IsoNet® - OptiPure’s patented scale inhibiting technology
protects equipment against scale and corrosion.
Reduces maintenance frequency and cost, and extends
equipment life.
Gradient-density depth filtration reduces dirt, rust, and
other debris as small as 1/2 micron to assure clean, clear
water and protect solenoids, valves and other fittings
against wear and plugging.
Activated carbon filtration makes water taste great and
protects equipment against corrosive chlorine.
Application
l
Encapsulated Qwik-Twist style cartridge for
OptiPure QTI systems.
l
Ice machines, coffee brewers and steam equipment.
High capacity cartridge extends filter system life reducing
maintenance frequency.
l
Improves equipment operating efficiency by reducing scale
and corrosion.
l
1/4 turn QT ‘Qwik-Twist’ bayonet cartridge makes
changing the filter quick, easy and sanitary.
l
NSF Certified under Standard 42 as replacement cartridge
in OptiPure QTI series systems.
Installation Tips
l
l
l
Insure cartridge is designed to replace the existing
cartridge.
Do not exceed cartridge specifications for temperature
and pressure.
Allow 3” clearance below system for filter cartridge
removal and replacement.
l
No activation procedure or flushing is required for
cartridge to perform as specified.
l
Feed-water connection to system should be COLD
only.
CTOS-Q
Model:
Part #: 300-05835
Foodservice Filtration Systems
Specifications
Cartridge
Dimensions
(Height x Width X Depth, inches
17.5” x 4” x 4”
Operating Pressure Range
10-125 psi
(0.7 -8.6 bar)
Inlet Water Temperature Range
35o -100o F
(2o -38o C)
Shipping Weight
5 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity
22,500 gals.
(85,162 liters)
Service Flow Rate
2.25 gpm
(8.5 lpm)
Sediment Reduction
.5 micron
(nominal)
Scale & Corrosion Inhibitor
IsoNet (100 grams)
System(s) Cartridge Used In
System is tested and certified
by NSF International against NSF/
ANSI Standard 42 for the reduction of:
Standard 42: Aesthetic Effects,
Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class 1
Model
Part Number
Qty
QTI-1
160-52012
1
QTI-1+
160-52055
1
QTI-2
160-52022
2
QTI-2+
160-51010
2
QTI-3
160-52032
3
Cartridges must be changed every six months, when
capacity is reached or when effluent pressure or flow
becomes inadequate.
This product is for commercial use only and must be
installed and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Dealer/Distributor Info:
Warranty
OptiPure Cartridges are warrantied against defects
in material and workmanship up to one year or when
cartridge capacity is reached. Claims of capacity or
rated service life are not applicable for mechanical
filtration. Contact OptiPure customer service or go to
the OptiPure website for a copy of the warranty.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300 Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
CTOS-Qspec109