Heavy Duty Slot Reader for Bar Codes and/or MagStripe
Reads MagStripes & Bar Codes
The Omni reads up to 3 tracks of information with a single swipe
in either direction. In combination, the same Omni unit can read
both bar code and MagStripe media. It scans bar codes printed
on paper, card stock, or plastic. An infrared option is available for
security-based applications, where bar codes are over-printed
to prevent duplication. The data outputs are TTL, RS232, keyboard wedge, USB/KB, USB/RS232, and Wiegand interfaces.
Edits and Formats Data
The Omni’s output can be formatted with terminating characters, special preamble and/or postamble character strings, and special parsing to match the data format expected by the terminal. These settings
are programmed into the reader and stored in non-volatile memory.
Stands Up to Heavy Use
The Omni reader is designed for demanding applitions, such as for access
control or in self-service kiosks. Its die-cast metal base, stainless steel
wearplate, and impact-resistant housing make it ideal for stand-alone,
high-volume applications. Its metal base can be securely mounted with
screws, and cable exits are available at the side, end, or bottom of the unit.
Weatherproof, sealed, or extended temperature versions are available for
use in harsh environments.
Features and Benefits
• TTL, KB, RS232, USB/KB, USB/RS232 and Wiegand interfaces
• Reads most bar codes symbologies and/or MagStripe Data
• Superior reading of jitter, scratched, and worn MagStripe cards
• Dual sided MagStripe head versions available
• Die-cast metal plate allows flexible mounting options
• Rugged weatherproof design with sealed or extended temperature
options
• Reliable for a minimum of 1,000,000 passes
• Signifies successful reads with a beeper and LED indicator
• Data output can be programmed into needed format
• Read up to 3 tracks of information
• Threaded inserts for easy and flexible mounting
w w w .id te c h p r o d u c ts . c o m
OMNI
™
OMNI
Omni Specifications WCR 32X7
Electrical
Power Requirements:
Bar Code:+5 VDC +/-10%, 35mA Max.
Magneti c Stripe:+5 VDC +/-10%, 30mA Max.
Hybrid:+5 VDC +/-10%, 65mA Max. combined magstripe and bar code
Interfaces:
TTL (TTL barcode and/or magnetics clock and data), keyboard wedge,
Standard SIA 26-bit Wiegand, RS-232,USB/KB, USB/RS-232
Environmental
32°F to 131°F (0°C to 55°C )
Operating Temperature:
Storage Temperature:
-31°F to 158°F (-35°C to 70°C )
Humidity:
Maximum 95% non-condensing, dry storage
Extended Temperature:
-31°F to 140°F (-35°C to 60°C), without ice on magnetic head*
Weatherproof Temperature: -31°F to 140°F (-35°C to 60°C), MagStripe only*
Water Resistent:
IP-53 Rating for sealed barcode reader version only
* Minimum quantities apply; extended temperature option not available with bar code feature.
Reliability
Operating Life: Warranty:
Mechanical
Media Thickness:
Media Formats:
Slot Width:
Swipe Speed:
1,000,000 cycles minimum
One year, parts and labor
Bar Code:0.005 inches (0.127mm) to 0.050 inches (1.27mm)
Magnetic Stripe:0 .015 inches (0.381mm) to 0.050 inches (1.27mm)
Bar Code: UPC-A, UPC-E, EAN-8, EAN-13, Code 39, Telepen, In
terleaved 2 of 5, Industrial 2 of 5, Code 128, MSI/Plessey, Codabar
Magnetic Stripe: ISO 7811, AAMVA, and other F2F formats
0.055 (1.37mm)
Bar Code:5 to 65 inches per second, bi-directional**
Magnetic Stripe:3 to 60 inches per second, bi-directional
** Media velocity can vary depending on bar code density and quality
Dimensions(L) x(W) x (H): 5 inches (127mm) x 2.05 inches (52mm) x 1.38 inches (35mm)
Weight: 1.4 lb. (including power pack)
Cable Length:
6-foot straight cable
Cable Connector: TTL- 9 pin squeeze, Keyboard - 6 pin mini DIN, RS-232 - DE9F,
TTL Mag/Bar Code Combo Readers-stripped and tinned leads
Bar Code Source Light:
Visible red 660nm or Infrared 930nm
Bar Code PCS:
60% minimum
Bar Code Centerline length: 0.49 inches (12.50mm) from bottom of slot
Corporate Headquarters:
to reading window center
10721 Walker Street Cypress, California 90630
www.idtechproducts.com
Bar Code Resolution Distance: 0.006 inches minimum
(714) 761-6368 sales@idtechproducts.com
Footprint:
International Sales Office
for Canada & South America:
+450 465 5261 (Canada) robertop@idtechproducts.com
European Sales Offices:
+33 5 65 50 28 59 (France)
+49(0) 8851 6159900 (Germany)
emea@idtechproducts.com
ISO 9001 : 2000 Certified
w w w .id te c h p r o d u c ts . c o m
©2009 International Technologies & Systems Corporation. ID TECH is a registered trademark of International Technologies & Systems Corporation.
OMNI and Value through Innovation are trademarks of International Technologies & Systems Corporation. All specifications subject to change without notice.
80028501-001
R03/09