advertisement
Professional
Vacuum Food Sealer
Model Number VS2650
quick Start guide
1 x 5m roll wine stopper one touch vacuum canister hose
10
11
8
9
12
13
3
4
1
2
5
6
7
Product Overview & Parts List
control Panel
Food
Dry Moist
Professional
Vacuum + Seal
Cancel
Vacuum Pressure
Normal Gentle
SEAL
14 15
16 17 18
1. Vacuum + Seal / Cancel
Button
2. Food Button
3. Vacuum Pressure Button
4. Seal Button
5. Locking Tabs
6. Upper Gasket
7. Sealing Element
8. Lower Gasket
9. Vacuum Chamber & Drip Tray
10. Sealing Strip
11. Air Intake Hose Connection
12. Lid Release Button
13. Canister & Bottle Stopper
Switch
14. Bottle Stopper
15. Canister Hose
16. Pre-cut Bags
17. Bag Roll
Compartment
Getting Started
read the full instruction manual thoroughly before use. this quick Start guide only contains brief operation instructions.
cautiON: Sealing element may become hot. dO NOt touch during use.
How to Make a Bag
1.
Place edge of unsealed vacuum bag onto the sealing strip with the edge at least 1cm above the strip
(see image below).
sealing strip
2.
Press down on both sides of the lid - ensuring both side latches have locked (see image below).
SEAL
3.
Press the SEAL only button.
4.
Once the LED light has turned off - press the side buttons to release the lid. The bag is now ready for use.
Note: if the end of the bag has not sealed - check that the seal strip is free of liquid or loose dirt. ensure you have locked down on both sides. then try again.
How to Vacuum Seal
1.
Add contents to bag. Place filled bag with opened end within the vacuum chamber, just below the air intake hose connection
(see image below). Ensure you cut the end as straight as possible as the entire opening needs to fit within this chamber.
vacuum chamber air intake hose connection
2.
Press down the sides of the lid to lock the unit.
3.
Press the VACUUM + SEAL button.
FOOD
Vacuum + Seal
Cancel
Dry Moist
VACUUM PRESSURE
Normal Gentle
Note: the Led light will illuminate during the vacuuming process. Once all the air has been removed - Wait - as it will now automatically activate the SeaL function. Led light will now illuminate as it seals the end of the bag.
SEAL
4.
ONCE this light has turned off - press the side buttons to release the lid. Your bag is now complete.
Professional
Additional Features
One-touch vacuum
Advanced functions
Adjustable vacuum pressure controls
Slimline design
Model Specifications colour
Size
Weight
Power
Heating current
Maximum vacuum pressure
Motor suction
Power source
Warranty
Multi-purpose sealing functions
LED status indicators
Wide Sealing Capacity
VS2650
Silver / Black
36.5L x 14D x 6.8H cm
1460g
120W
7A
-0.75 bar
9L/minute on normal setting
220-240V~50Hz
1 Year
YEAR WARRANTY
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project