Readers and Credentials How to Order Guide

READERS AND CREDENTIALS
HOW TO ORDER GUIDE
PLT-02630, B.0
December 2017
Note: This document is subject to change without notice. The current version of this document is
available for download at: https://www.hidglobal.com/document-library.
hidglobal.com
Readers and Credentials How to Order Guide, PLT-02630, B.0
Copyright
©2016 - 2017 HID Global Corporation/ASSA ABLOY AB.
All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior
written permission of HID Global Corporation.
Trademarks
HID Global, HID, the HID Brick logo, the Chain Design, CORPORATE 1000, DUOPROX, ENTRYPROX,
FLEXCARD, FLEXISO, FLEXPASS, FLEXSMART, GENUINE HID, HID ELITE, HID MOBILE ACCESS, ICLASS,
ICLASS ELITE, ICLASS SE, INDALA, ISOPROX, EDGE, EDGE EVO, MAXIPROX, MICROPROX, MINIPROX,
MULTICLASS, MULTICLASS SE, PIVCLASS, PROXCARD, PROXCARD II, PROXKEY, PROXPASS, PROXPOINT,
PROXPRO, SECURE IDENTITY OBJECT, SEOS, THINLINE II, and UNIVERSITY 1000 are the trademarks or
registered trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may not
be used without permission. All other trademarks, service marks, and product or service names are trademarks or
registered trademarks of their respective owners.
MIFARE, MIFARE DESFire, MIFARE Classic, and MIFARE DESFire EV1 are registered trademarks of NXP B.V. and
are used under license.
Revision History
Date
December 2017
September 2017
August 2017
July 2017
Description
Version
Updated Credentials section with information on the HID Global
Product Configurator.
Various minor updates.
Update to iCLASS SE Biometric and Display
Update to iCLASS SE Biometric ReaderSupport/Keyset and
Configuration Settings.
New iCLASS SE Biometric and Display Readers
Removed EOL iCLASS LCD products
B.0
A.9
A.8
A.7
Contacts
For additional offices around the world, see www.hidglobal.com corporate offices.
North America
Asia Pacific
611 Center Ridge Drive
Austin, TX 78753
USA
Phone: 866-607-7339
Fax:
949-732-2120
19/F 625 King’s Road
North Point, Island East
Hong Kong
Phone: 852 3160 9833
Fax:
852 3160 4809
Europe, Middle East and Africa
Brazil
Haverhill Business Park Phoenix Road
Haverhill, Suffolk CB9 7AE
England
Phone: 44 (0) 1440 711 822
Fax:
44 (0) 1440 714 840
Condomínio Business Center
Av. Ermano Marchetti, 1435
Galpão A2 CEP 05038-001
Lapa - São Paulo/SP
Brazil
Phone:
55 11 5514-7100
HID Global Customer Support: www.hidglobal.com/support
Page 2 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
CONTENTS
Readers ........................................................................................................................................................ 5
Understanding HID Global Readers ......................................................................................................................... 5
What should I know about security keysets? ....................................................................................................... 5
How can I order HID Elite configured readers? .................................................................................................... 5
How can I check the status of my order? ............................................................................................................. 5
Selecting the Right Reader ....................................................................................................................................... 6
iCLASS SE Readers ................................................................................................................................................. 7
iCLASS SE Reader - Seos Profile with Bluetooth Option..................................................................................... 7
iCLASS SE Reader - Standard Profile with Bluetooth .......................................................................................... 9
iCLASS SE Reader - Standard Profile ............................................................................................................... 11
iCLASS SE Biometric Reader - Wiegand or OSDP............................................................................................ 13
iCLASS SE Reader - Magnetic Stripe ................................................................................................................ 14
pivCLASS Reader - FIPS 201 Strong Authentication ......................................................................................... 16
pivCLASS Reader - Wiegand or OSDP ............................................................................................................. 18
iCLASS SE U90 - UHF Long Range Reader ..................................................................................................... 19
iCLASS SE Reader Accessories ........................................................................................................................ 20
iCLASS Readers..................................................................................................................................................... 23
iCLASS Read/Write Reader - 6141 / 6111 / 6121 / 6131 ................................................................................... 23
EDGE® Reader - EDGE EVO Solo .................................................................................................................... 24
iCLASS Reader Accessories ............................................................................................................................. 25
HID Proximity Readers ........................................................................................................................................... 26
ProxPoint Plus Proximity Reader - 6005 / 6008 ................................................................................................. 26
MiniProx Proximity Reader - 5365 / 5368........................................................................................................... 27
ProxPro Family Proximity Reader - 5455 / 5458 / 5355 / 5352 / 5358 ............................................................... 28
ThinLine II Proximity Reader - 5395 / 5398 ........................................................................................................ 29
MaxiProx Proximity Reader - 5375..................................................................................................................... 30
EntryProx Proximity Reader - 4045 .................................................................................................................... 31
HID Proximity Reader Accessories .................................................................................................................... 32
Indala Proximity Readers........................................................................................................................................ 34
Overview ............................................................................................................................................................ 34
Advantage Series Reader - ASR 620................................................................................................................. 34
FlexPass™ Reader - FP Arch / Keypad ............................................................................................................. 35
FlexPass Accessories ........................................................................................................................................ 36
HID Mobile Access .................................................................................................................................... 37
What Is HID Mobile Access? .................................................................................................................................. 37
Creating HID Mobile Access User Account ............................................................................................................ 37
Ordering Information ............................................................................................................................................... 38
Ordering Information for Customers with Custom Part Numbers ............................................................................ 38
Credentials ................................................................................................................................................. 39
Understanding HID Credentials .............................................................................................................................. 39
What should I know about security keysets? ..................................................................................................... 39
How can I order HID Elite configured credentials? ............................................................................................. 39
How can I migrate from my current credential technology? ............................................................................... 39
What is the difference between iCLASS Seos, iCLASS SE and iCLASS credentials? ...................................... 40
Credentials Marking ................................................................................................................................................ 41
Credential Marking Technology ......................................................................................................................... 41
iCLASS Seos Credentials [Recommended Technology] ....................................................................................... 42
iCLASS Seos Card - 500 ................................................................................................................................... 42
iCLASS Seos + iCLASS Card - 522 ................................................................................................................... 43
December 2017
Page 3 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Seos + Prox Card - 510 ........................................................................................................................ 45
iCLASS Seos + iCLASS + Prox Card - 520 ....................................................................................................... 46
iCLASS SE Credentials .......................................................................................................................................... 48
iCLASS SE Card - 300 / 305 .............................................................................................................................. 48
iCLASS SE + Prox Card - 315 ........................................................................................................................... 49
iCLASS SE Key - 325 ........................................................................................................................................ 51
iCLASS SE Tag - 330 ........................................................................................................................................ 52
iCLASS SE Clamshell Card - 335 ...................................................................................................................... 53
iCLASS SE + Other HF Card - 391 .................................................................................................................... 54
iCLASS SE + Other 13.56MHz + Prox Card - 396 ............................................................................................. 56
iCLASS Credentials ................................................................................................................................................ 58
iCLASS Card - 200 / 210.................................................................................................................................... 58
iCLASS + Prox card - 212 .................................................................................................................................. 59
iCLASS Key - 205 .............................................................................................................................................. 61
iCLASS Tag - 206 .............................................................................................................................................. 62
iCLASS Clamshell Card - 208 ............................................................................................................................ 63
iCLASS + Other HF Card - 242 ......................................................................................................................... 64
iCLASS + Other 13.56 MHz + Prox Card - 262 ................................................................................................. 66
UHF Credentials ..................................................................................................................................................... 68
UHF Card - 600 .................................................................................................................................................. 68
UHF + iCLASS Card - 601 ................................................................................................................................. 69
UHF + MIFARE Classic Card - 603 .................................................................................................................... 71
HID Proximity Credentials....................................................................................................................................... 73
ProxCard II Card - 1326 ..................................................................................................................................... 73
DuoProx® II Card - 1336 / 1536 .......................................................................................................................... 74
ProxKey III Keyfob - 1346 .................................................................................................................................. 75
ISOProx® II Card - 1386 / 1586 .......................................................................................................................... 76
ProxPass® II Active Vehicle Identification Tag - 1351 ........................................................................................ 77
MicroProx® Tag Proximity - 1391 ....................................................................................................................... 78
Indala 125kHz Credential ....................................................................................................................................... 80
FPISO - FlexPass Imageable Card .................................................................................................................... 81
FPCRD - FlexCard Standard Card ..................................................................................................................... 82
FPTAG - FlexTag ............................................................................................................................................... 83
FPKEY - FlexKey Keytag ................................................................................................................................... 84
MIFARE Credentials ............................................................................................................................................... 86
MIFARE Classic Card - 340 / 345 / 1430 / 1440 / 1436 / 1446 .......................................................................... 86
MIFARE Classic + Prox card - 350 / 355 / 1431 / 1441 / 1437 / 1447 ................................................................ 88
MIFARE Classic Keyfob - 1434 / 1444 ............................................................................................................... 90
MIFARE Classic Adhesive Tag - 1435 ............................................................................................................... 91
MIFARE DESFire EV1 Card - 370 / 375 / 1450 / 1456....................................................................................... 92
MIFARE DESFire EV1 + Prox Card - 380 / 385 / 1451 / 1457 ........................................................................... 93
MIFARE Classic + MIFARE DESFire EV1 Card - 282 ....................................................................................... 95
Credential Programmers .......................................................................................................................... 97
Understanding HID Credential programmers .......................................................................................................... 97
Credential Encoder Ordering Basics .................................................................................................................. 97
iCLASS SE Encoder Summary .......................................................................................................................... 98
iCLASS SE Encoder - How Does it Work? ......................................................................................................... 98
iCLASS SE Encoder Order Form ..................................................................................................................... 100
iCLASS SE Encoder - Credential Credits ......................................................................................................... 101
Page 4 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
READERS
Understanding HID Global Readers
What should I know about security keysets?
iCLASS SE® readers and iCLASS Seos®/iCLASS SE credentials offer two keyset security schemes, HID Elite™ and Standard.
The HID Elite Security Program supports a unique keyset on a per site/company basis.
The keyset governs a variety of keys, including:
•
Media (credential) keys for iCLASS SE, SIO-encoded iCLASS, MIFARE Classic® (SIO®) and MIFARE DESFire EV1® (SIO)
credentials
•
SIO authenticity and privacy keys (media independent)
•
Configuration programming keys (for programming reader configuration, also media independent)
When utilizing HID’s standard key set for the above keys, all standard keyed credentials work with all standard keyed readers. Additionally,
any Standard Security configuration card configures a Standard Security reader (only accomplished during the first five (5) seconds after
reader powers-up). Conversely, when utilizing the HID Elite program, only site/company specific HID Elite credentials and programming cards
work with matching readers.
The Standard Security Program provides universal keysets that offer maximized compatibility by keying readers and cards with matching
security for use in the general population. This allows for maximized compatibility because readers and cards are not keyed on a per
site/company basis but rather all keyed the same. This offers the advantage to the integrator as a standard stock of readers and cards will
interoperate for a variety of sites/companies, rather than needing different stocks of readers and cards for each individual site. iCLASS SE
readers provide two Standard Security Keysets that offer compatibility with the following credentials:
Standard Security Keyset
Compatibility with these Credentials
Version 1
iCLASS Seos (+ Prox)
iCLASS SE (+ Prox)
iCLASS SR (+ Prox)
iCLASS® (+ Prox)
MIFARE Classic (+ Prox)
MIFARE DESFire EV1 (+ Prox)
Version 2
iCLASS Seos (+ Prox)
iCLASS SE (+ Prox)
MIFARE Classic (+ Prox)
MIFARE DESFire EV1 (+ Prox)
How can I order HID Elite configured readers?
•
Direct customers of HID must be authorized to purchase components with HID Elite keys. If you are not authorized, you must have
the key owner authorize you through the Authorization form.
See http://www.hidglobal.com/services/secure-identity/credential-programs/iclass-elite-and-se-elite.
•
Ensure the HID Elite flag is set in the part number (of readers, credentials and programming cards).
•
All Purchase Orders for HID Elite components must be ordered with the HID Elite reference number (starts with ICE or MOB).
How can I check the status of my order?
•
To check order status, go to: https://orderstatus.hidglobal.com/WebOrderStatus/
December 2017
Page 5 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
Selecting the Right Reader
In order to make sure our customers benefit from the latest and most secure technology, based on their needs and current situation, HID
Global offers a reader product guidance. Follow the suggested route below based on your current credential population, to see what reader
solution is recommended by HID Global.
START
Credentials already
issued/deployed?
NO
HID Global recommends:
iCLASS SE - Seos Profile readers
Simplest configuration as well as
best-in-class security and privacy
protection.
YES
iCLASS Seos and/or
HID Prox cards only?
YES
NO
HID Global recommends:
iCLASS SE Magnetic Stripe readers
Magnetic stripe cards?
YES
Backwards compatible with magnetic
stripe cards, future capable to
support newer credential
technologies.
NO
FIPS 201 standard cards
(PIV, CIV, CAC, TWIC etc.)?
YES
HID Global recommends:
pivCLASS readers
Support for FIPS 201 standard cards
(PIV, CIV, CAC, TWIC etc.).
NO
HID Global recommends:
iCLASS SE - Standard Profile readers
Broad compatibility with legacy and
new credential technologies, including
iCLASS Seos, iCLASS SE, iCLASS
and Indala Prox.
Page 6 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Readers
Note: See Selecting the Right Reader on page 6 for guidance.
iCLASS SE Reader - Seos Profile with Bluetooth Option
Application: Designed to instill confidence with best-in-class security and privacy protection.
Technologies Supported: iCLASS Seos, HID Prox, and HID Mobile Access® Mobile IDs via NFC and/or Bluetooth Smart.
1. Select one option from each of the following sections to construct part number:
Reader Model (Select one model)
900 - Model R10 - Designed for door applications requiring a small footprint card reader.
910 - Model R15 - Designed for door applications requiring a mullion style mounting.
920 - Model R40 - Designed for door applications requiring standard wall switch mounting.
921 - Model RK40 - Designed for door applications requiring standard wall switch mounting and keypad input.
125 KHz Credential Support (Select one option)
N - No 125 KHz support
P - Support for HID Prox
13.56 MHz and Bluetooth credential support (Select one option)
S - Supports iCLASS Seos cards, and Mobile IDs via NFC
B - Supports iCLASS Seos cards, and Mobile IDs via NFC and Bluetooth Smart.
Controller Communication
N - Wiegand
Wiring Connection (Select one option)
N - Pigtail
T - Terminal strip
Hardware Revision
E - Revision E
Color
K - Black
Keyset (Select one option)
2 - Standard and Mobile-Ready - supports iCLASS Seos credentials with standard keys. Prepared to support HID Mobile Access, but lacks the personalized configuration to
read an organization’s specific Mobile IDs. This configuration can be ordered at any time but will require field activation after the organization has completed registration for
HID Mobile Access.
E - HID Elite and Mobile-Enabled - supports iCLASS Seos credentials and Mobile IDs. Fully activated and personalized to support an organization’s specific Mobile IDs. These
readers can only be ordered after the organization has completed registration for either HID Elite or HID Mobile Access. If HID Elite reference (ICE) is given at time of
order, only iCLASS Seos credentials with HID Elite keys are supported. If Mobile Reference (MOB) is given at time of order, only iCLASS Seos credentials with standard
keys are supported.
Configuration Settings
0000 - Standard configuration. All iCLASS SE Readers - Seos Profile ship with the following standard configuration:
• LED normally red, LED flashes green and beeps on card read
• Keypad output is 4-bit (if keypad reader)
Non-standard configuration can be applied at time of installation using the configuration card accessories listed on next page.
December 2017
Page 7 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
2. Enter the numbers/letters from the selections above into the table below.
The resulting “Final Part Number” is used when ordering reader.
Reader
Model
920
Example
Final Part Number
125 KHz
N
13.56 MHz
S
Communication
N
N
Wiring
HW
Rev
Color
E
E
K
K
T
Keyset
2
Config
Setting
0000
0000
3. Place an order.
To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service.
Contact information is available at: http://www.hidglobal.com/customer-service
Need credentials? Credentials supported by this reader model includes (depending on options chosen above):
•
Mobile IDs
•
iCLASS Seos
•
iCLASS Seos + Prox
iCLASS SE Reader - Seos Profile Configuration Cards
Config Card Number
Description
SE-SEOS-2-CRD0
iCLASS SE Seos Profile readers configuration config cards - Standard keys (2) - all cards (21 cards)
SE-SEOS-E-CRD0
iCLASS SE Seos Profile readers configuration config cards - HID Elite keys - all cards (21 cards)
SE-SEOS-2-CRD1
iCLASS SE Seos Profile readers configuration config cards - Standard keys (2) - Seos and prox settings (4 cards)
Contains cards used to change the priority setting of iCLASS Seos and Prox technologies
SE-SEOS-2-CRD2
iCLASS SE Seos Profile readers configuration config cards - Standard keys (2) - Panel output settings (3 cards)
Contains cards used to change the reader output between Wiegand and OSDP
SE-SEOS-2-CRD3
iCLASS SE Seos Profile readers configuration config cards - Standard keys (2) - Audio visual settings (13 cards)
Contains cards used to change behaviour of reader LED and beeper
SE-SEOS-2-CRD4
iCLASS SE Seos Profile readers configuration config cards - Standard keys (2) - keypad format settings (4 cards)
Contains cards used to change output settings of keypad reader models
SE-SEOS-E-CRD1
iCLASS SE Seos Profile readers configuration config cards - HID Elite keys - Seos and prox settings (4 cards)
Contains cards used to change the priority setting of iCLASS Seos and Prox technologies
SE-SEOS-E-CRD2
iCLASS SE Seos Profile readers configuration config cards - HID Elite keys - Panel output settings (3 cards)
Contains cards used to change the reader output between Wiegand and OSDP
SE-SEOS-E-CRD3
iCLASS SE Seos Profile readers configuration config cards - HID Elite keys - Audio visual settings (13 cards)
Contains cards used to change behaviour of reader LED and beeper
SE-SEOS-E-CRD4
iCLASS SE Seos Profile readers configuration config cards - HID Elite keys - keypad format settings (4 cards)
Contains cards used to change output settings of keypad reader models
Note: The above configuration cards are only intended for use with iCLASS SE Reader - Seos profile.
Page 8 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Reader - Standard Profile with Bluetooth
Application: Designed to ensure compatibility with legacy credentials and capability to support the future.
Technologies Supported: Wide variety of contactless credentials including HID Mobile Access Mobile IDs via NFC and/or Bluetooth Smart.
1. Select one option from each of the following sections:
Reader Model (Select one model)
900 - Model R10 - Designed for door applications requiring a small footprint card reader.
910 - Model R15 - Designed for door applications requiring a mullion style mounting.
920 - Model R40 - Designed for door applications requiring standard wall switch mounting.
921 - Model RK40 - Designed for door applications requiring standard wall switch mounting and keypad input.
125 KHz Credential Support (Select one option)
N - No 125 KHz support
P - Support for HID Prox, AWID and EM4102 (32 bits)
13.56 MHz and Bluetooth Credential Support
M - Support for HID Mobile Access Mobiles IDs via NFC and Bluetooth Smart - reader equipped with Bluetooth Smart module. Also supports iCLASS Seos, iCLASS SE,
iCLASS SR, iCLASS, MIFARE Classic (SIO), MIFARE DESFire EV1 (SIO) and ISO 14443 UID.
Controller Communication (Select one option)
N - Wiegand
C - Clock & Data
P - OSDP
Wiring Connection (Select one option)
N - Pigtail
T - Terminal strip
Hardware Revision
E - Revision E
Color
K - Black
Keyset (Select one option)
M - Mobile-Ready: Prepared to support HID Mobile Access, but lacks the personalized configuration to read an organization’s specific Mobile IDs. This configuration can be
ordered at any time but will require field activation after the organization has completed registration for HID Mobile Access.
E - Mobile-Enabled: Fully activated and personalized to support an organization’s specific Mobile IDs. These readers can only be ordered after the organization has completed
registration for either HID Elite or HID Mobile Access. If HID Elite reference (ICE) is given at time of order, only iCLASS Seos credentials with HID Elite keys are supported.
If Mobile Reference (MOB) is given at time of order, only iCLASS Seos credentials with standard keys are supported.
December 2017
Page 9 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
Configuration Setting (Select one option)
Standard configuration: All iCLASS SE Readers - Standard Profile with Bluetooth Smart ship with the following features
•
Controller Communication = N - Wiegand, or P - OSDP
•
LED normally red, LED flashes green and beeps on card read
•
Keypad output is 4-bit (if keypad reader)
This configuration is represented by the following standard configuration setting extensions listed.
Communication
125KHz Support
Keypad Reader
N - No
N - Wiegand
P - Yes
N - No
P - OSDP
P - Yes
Extension
No
A001
Yes
A002
No
A003
Yes
A004
No
A005
Yes
A006
No
A007
Yes
A008
ANY other option selected (including Clock & Data communication) requires a Non-Standard configuration EXTENSION. To determine configuration options, use the Select tab on the iCLASS SE
Configuration Guide spreadsheet at the following link: www.hidglobal.com/node/19914. Your HID Global Support or Sales representative can help you determine your final configuration.
2. Enter the numbers/letters from the previous selections into the following table.
The resulting “Final Part Number” is used when ordering reader.
Reader
Model
Example
920
Final Part Number
125 KHz
N
13.56 MHz
M
Communication
N
M
Wiring
T
HW
Rev
Color
E
K
E
K
Keyset
M
Config
Setting
A001
3. Place an order.
To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service.
Contact information is available at: http://www.hidglobal.com/customer-service
Need credentials? Credentials supported by this reader model includes (depending on options chosen above):
•
Mobile IDs
•
iCLASS Seos
•
iCLASS
•
MIFARE DESFire EV1
•
MIFARE Classic
Page 10 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Reader - Standard Profile
Application: Designed to ensure compatibility with legacy credentials and capability to support the future.
Technologies Supported: Wide variety of contactless credentials including HID Mobile Access Mobile IDs via NFC.
1. Select one option from each of the following sections:
Reader Model (Select one model)
900 - Model R10 - Designed for door applications requiring a
small footprint card reader.
921 - Model RK40 - Designed for door applications requiring
standard wall switch mounting. Supports keypad input.
910 - Model R15 - Designed for door applications requiring a
mullion style mounting.
929 - Model RKL400 - Designed for door applications requiring
LCD display. – Coming soon, contact your HID Sales
Represenative
920 - Model R40 - Designed for door applications requiring
standard wall switch mounting.
940 - Model R90 - Designed for vehicle access applications
requiring extended read range.
95A - Décor model - Designed for door applications requiring
low profile EU square wall switch mounting.
125 KHz Credential Support (Select one option)
N - None
P - Supports HID Prox, AWID and EM4102 (32 bits). Not available on models 940 or 95A.
L - Supports Indala® Prox, please make sure to provide needed format at time of order. Not available on models 929, 940 or 95A. Not available with OSDP communication
and/or Custom Programming or Transit.
iCLASS
MIFARE Classic (SIO)
MIFARE DESFire EV1
(SIO)
Mobile IDs via NFC
FeliCa IDm
CEPAS CAN or UID
●
●
-
●
●
●
-
-
-
-
-
-
T - Maximum compatibility
●
●
●
●
●
●
●
-
●
-
-
-
-
R - FeliCa and CEPAS1
●
●
●
●
●
●
●
-
●
-
-
●
●
W - Custom programming2
○
○
○
○
○
○
○
-
○
●
●
-
-
MIFARE Classic
(Custom data)
iCLASS SR
●
ISO14443 UID
iCLASS SE
N - High security
Mobile IDs via
Bluetooth Smart
iCLASS Seos
MIFARE DESFire EV1
(Custom data)
13.56 MHz Credential Support (Select one option)
● Supported
○ Optionally supported
- Not supported
1
Not available on model 940.
2
Consult your regional technical support representative for specific configurations.
Controller Communication (Select one option)
N - Wiegand
C - Clock & Data
P - OSDP
Wiring Connection (Select one option)
N - Pigtail (Not available on models 929, 940 or 95A)
T - Terminal strip
Hardware Revision
E - Revision E
December 2017
Page 11 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
Color (Select one option)
K - Black
W - White. Only available on 95A model.
G - Gray. Only available on 95A model.
Keyset (Select one option)
0 - Standard v1 - Supports credentials with default HID keys, including iCLASS and iCLASS SR.
2 - Standard v2 - Supports credentials with default HID keys, not including iCLASS and iCLASS SR.
E - HID Elite - Supports credentials with HID Elite keys, including iCLASS and iCLASS SR, and/or Mobile IDs. Key reference (ICE or MOB) required at time of order.
Configuration Setting
0000 - Standard configuration (not available on 929):
 125 kHz Credential Support = N – None or P – Supports HID Prox, AWID and EM4102 (32 bits)
 13.56MHz Credential Support = T - Maximum Compatibility
 Controller Communication = N - Wiegand
 Keyset = 0 - Standard v1 or E - HID Elite
 LED normally red, LED flashes green and beeps on card read
 Keypad output is 4-bit (if keypad reader)
xxxx - Non-Standard configuration: ANY other options selected above requires a Non-Standard 4 digit extension. To order non-standard configuration options, use the Select
tab on the iCLASS SE Configuration spreadsheet at the following link www.hidglobal.com/node/19914. Your HID Global Support or Sales representative can help you
determine your final configuration.
2. Enter the numbers/letters from the selections above into the following table:
The resulting “Final Part Number” is used when ordering reader.
Reader Model
Example
920
125 KHz
13.56 MHz
Communication
Wiring
HW
Rev
Color
Keyset
Config
Setting
N
T
N
T
E
K
2
0000
Final Part Number
E
3. Place an order.
To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service.
Contact information is available at: www.hidglobal.com/customer-service
Need credentials? Credentials supported by this reader model include the following, depending on options chosen above:
•
Mobile IDs
•
iCLASS Seos
•
iCLASS
•
iCLASS SE
•
MIFARE DESFire EV1
•
MIFARE Classic
Page 12 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Biometric Reader - Wiegand or OSDP
Application: Designed for door applications requiring multi-factor authentication including biometric.
Technologies Supported: iCLASS® Seos® 8kB and iCLASS® 16kb-32kb credentials
1. Select one option from each section below:
Reader Model (Select one model)
928 - Model RKLB40 - Designed for door applications requiring multi-factor
authentication including biometric. Featuring an LCD display, biometric
sensor and keypad.
125 KHz Credential Support
N - No 125 KHz support
13.56 MHz credential support (Select one option)
S – Supports biometric template on iCLASS Seos credentials
F – Supports biometric template on iCLASS Seos, iCLASS SR and iCLASS credentials
Controller Communication (Select one option)
N – Wiegand
C - Clock & Data
P – OSDP – Coming soon, contact your HID Sales Represenative
Controller Connection
T - Terminal strip
Hardware Revision
E - Revision E
Color
K - Black
iCLASS Support/Keyset (Select one option)
0 - Standard v1 – Supports iCLASS Seos, iCLASS SR and iCLASS credentials with default HID keys.
2 - Standard v2 - Supports iCLASS Seos credentials with default HID keys.
E - HID Elite - Supports iCLASS Seos, iCLASS SR and iCLASS credentials with HID Elite keys. Key reference (ICE or MOB) required at time of order.
Configuration Setting
Standard configuration iCLASS SE Biometric ship with the following features
•
Controller Communication = N - Wiegand or P – OSDP
•
13.56 Mhz Credential Support = S - iCLASS Seos or F - iCLASS Seos, iCLASS SR and iCLASS
•
LED normally red, LED flashes green and beeps on card read
•
Controller PIN verification with Keypad output 4-bit (local PIN verification is a non-standard configuration)
These configuration options are represented by the following standard configuration setting extensions listed.
Controller Communication
13.56 MHz Credential Support
N - Wiegand
P - OSDP
Extension
S - iCLASS Seos
00TG
F - iCLASS Seos, iCLASS SR and iCLASS
00TE
S - iCLASS Seos
00TH
F - iCLASS Seos, iCLASS SR and iCLASS
00TF
ANY other option selected (including Clock & Data communication) requires a Non-Standard configuration EXTENSION. To determine configuration options, use the Select tab on the iCLASS SE
Configuration Guide spreadsheet at the following link: www.hidglobal.com/node/19914. Your HID Global Support or Sales representative can help you determine your final configuration.
2. Enter the numbers/letters from the selections above into the table below.
The resulting “Final Part Number” is used when ordering reader.
Reader Model
Example
928
Final Part Number
928
December 2017
125 KHz
13.56 MHz
Communication
Wiring
HW Rev
Color
N
F
N
T
E
K
T
E
K
Keyset
0
Config Setting
xxxx
Page 13 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Reader - Magnetic Stripe
Application: Designed to ensure compatibility with legacy credentials and capability to support the future.
Technologies Supported: Magnetic stripe cards and a wide variety of contactless credentials including HID Mobile Access Mobile IDs
via NFC.
1. Select one option from each of the following sections:
Reader Model (Select one model)
922 - Model RM40 - Designed for door applications requiring standard wall switch mounting.
925 - Model RMK40 - Designed for door applications requiring standard wall switch mounting. Supports keypad
input.
125 KHz Credential Support (Select one option)
N - No 125 KHz support
P - Support for HID Prox, AWID and EM4102 (32 bit)
●
●
●
●
-
●
-
-
N - High security Weigand
●
●
●
-
●
●
●
-
-
-
-
W - Custom programming*
○
○
○
○
○
○
○
-
○
●
●
MIFARE Classic
(Custom data)
MIFARE Classic (SIO)
●
ISO14443 UID
iCLASS
●
Mobile IDs via
Bluetooth Smart
iCLASS SR
●
Mobile IDs via NFC
iCLASS SE
T - Maximum compatibility
MIFARE DESFire EV1
(SIO)
iCLASS Seos
MIFARE DESFire EV1
(Custom data)
13.56 MHz Credential Support (Select one option)
● Supported
○ Optionally supported
- Not supported
* Consult your regional technical support representative for specific configurations.
Controller Communication (Select one option)
N - Wiegand
C - Clock & Data
P - OSDP
Wiring Connection (Select one option)
N - Pigtail
T - Terminal strip
Hardware Revision
E - Revision E
Color
K - Black
iCLASS Support/Keyset (Select one option)
0 - Standard v1 - Reads credentials with default HID keys including standard iCLASS and/or iCLASS SR.
2 - Standard v2 - Reads credentials with default HID keys not including standard iCLASS and/or iCLASS SR.
E - HID Elite - Reads credentials with HID Elite keys, including iCLASS and iCLASS SR, and/or Mobile IDs. Key reference (ICE or MOB) required at time of order.
Page 14 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
Configuration Settings
To determine configuration options, use the Select tab on the iCLASS SE Configuration Guide spreadsheet at the following link:
www.hidglobal.com/node/19914. Your HID Global Support or Sales representative can help you determine your final configuration.
2. Enter the numbers/letters from the selections above into the table below.
The resulting “Final Part Number” is used when ordering reader.
Reader Model
Example
125 KHz
922
N
13.56 MHz
N
Communication
N
Final Part Number
Wiring
T
HW
Rev
Color
E
K
E
K
Keyset
2
Config
Setting
0000
3. Place an order.
To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service.
Contact information is available at: www.hidglobal.com/customer-service.
Need credentials? Credentials supported by this reader model include (depending on options chosen above):
•
Mobile IDs
•
iCLASS Seos
•
iCLASS SE
•
iCLASS
•
HID Prox
•
MIFARE DESFire EV1
•
MIFARE Classic
December 2017
Page 15 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
pivCLASS Reader - FIPS 201 Strong Authentication
Application: Designed for applications that leverage the pivCLASS® Authentication Module (PAM) to validate FIPS 201 credential certificates
for the highest level of security.
Technologies Supported: FIPS 201 credentials such as PIV, CIV, TWIC, CAC, and FRAC, and a wide variety of other contactless
credentials.
1. Select one option from each section below:
Reader Model (Select one model)
900 - Model R10 - Designed for door applications requiring
a small footprint card reader.
923 - Model RKCL40 - Designed for door applications requiring
standard wall switch mounting. Featuring a contact slot,
LCD display, and keypad.
920 - Model R40 - Designed for door applications requiring
standard wall switch mounting.
924 - Model RKCLB40 - Designed for door applications requiring
standard wall switch mounting. Featuring a contact slot,
LCD display, biometric sensor, and keypad.
921 - Model RK40 - Designed for door applications requiring
standard wall switch mounting. Supports keypad input.
125 KHz Credential Support (Select one option)
N - No 125 KHz support
P - Support for HID Prox, AWID and EM4102 (32 bit) (not available on model RKCLB40)
13.56 MHz credential support (Select one option)
H - Contactless. Supports PKI-Based FIPS 201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC. This option is only available for models R10, R40 and RK40.
P - Contactless + Contact. Supports PKI-Based FIPS 201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC. FIPS 201 type cards can be read using either the
contact or contactless card interface (RKCL40). This option is only available for models RKCL40, and RKCLB40.
Controller Communication (Select one option)
R - RS485 FDX. Full duplex is required when connecting a pivCLASS reader to a PAM.
P - RS485 HDX OSDP. Half duplex connection requires a connection with an OSDP-compliant strong authentication controller infrastructure. Only available with RKCL40.
Controller Connection (Select one option)
N - Pigtail
T - Terminal strip
Hardware Revision
E - Revision E
Color
K - Black
Keyset (Select one option)
0 - Standard v1 - Reads credentials with default HID keys including standard iCLASS and/or iCLASS SR.
E - HID Elite - Reads credentials with HID Elite keys, including iCLASS and iCLASS SR, and/or Mobile IDs. Key reference (ICE or MOB) required at time of order.
Configuration Setting (Select one option)
Configuration setting extension for these reader models depends on the model and 125KHz support chosen above, select from list below:
Reader Model
R10/R40
RK40
RKCL40
RKCLB40
Page 16 of 105
125KHz Support
Extension
N - No
032Y
P - Yes
0007
N - No
033A
P - Yes
033B
N - No
032V
P - Yes
0008
N - No
0504
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
2. Enter the numbers/letters from the selections above into the table below.
The resulting “Final Part Number” is used when ordering reader.
Reader Model
Example
125 KHz
900
N
13.56 MHz
Communication
H
Final Part Number
R
R
Wiring
T
HW
Rev
Color
E
K
E
K
Keyset
0
Config
Setting
032Y
3. Place an order.
To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service.
Contact information is available at: www.hidglobal.com/customer-service.
Need credentials? Credentials supported by this reader model includes (depending on options chosen above):
•
Mobile IDs
•
iCLASS Seos
•
iCLASS SE
•
iCLASS
•
HID Prox
•
MIFARE DESFire EV1
•
MIFARE Classic
December 2017
Page 17 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
pivCLASS Reader - Wiegand or OSDP
Application: Designed to support FIPS 201 credentials and communicate to traditional intelligent controller using Wiegand or OSDP protocol
Technologies Supported: FIPS 201 credentials such as PIV, CIV, TWIC, CAC, and FRAC and a wide variety of contactless credentials
1. Select one option from each section below:
Reader Model (Select one model)
900 - Model R10 - Designed for door applications
requiring a small footprint card reader.
921 - Model RK40 - Designed for door applications requiring
standard wall switch mounting.
920 - Model R40 - Designed for door applications
requiring standard wall switch mounting.
923 - RKCL40 - Combination, contact plus contactless reader
with keypad and LCD.
125 KHz Credential Support (Select one option)
N - No 125 KHz support
P - Support for HID Prox, AWID and EM4102 (32 bit)
13.56 MHz credential support (Select one option)
H - Contactless. Supports PKI-Based FIPS 201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC. This option is only available for models R10, R40 and RK40.
P - Contactless + Contact. Supports PKI-Based FIPS 201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC. FIPS 201 typecards can be read using either the
contact or contactless card interface. This option is only available for model RKCL40.
Controller Communication (Select one option)
R - Wiegand; Configurable to support RS-485 full duplex for communication with pivCLASS Authentication Module (PAM)
P - Wiegand or OSDP via RS-485 half duplex; selectable through configuration. Not available for model with RKCL40.
Controller Connection (Select one option)
N - Pigtail
T - Terminal strip
Hardware Revision
E - Revision E
Color
K - Black
iCLASS Support/Keyset (Select one option)
0 - Standard v1 - Reads credentials with default HID keys including standard iCLASS and/or iCLASS SR.
E - HID Elite - Reads credentials with HID Elite keys, including iCLASS and iCLASS SR, and/or Mobile IDs. Key reference (ICE or MOB) required at time of order.
Configuration Setting
Obtaining individual pivCLASS reader configuration settings requires the use of the online Configuration Guide.
2. Enter the numbers/letters from the selections above into the table below.
The resulting “Final Part Number” is used when ordering reader.
Reader Model
Example
900
Final Part Number
125 KHz
13.56 MHz
Communication
Wiring
HW Rev
Color
N
H
R
T
E
K
E
K
R
Keyset
Config Setting
0
xxxx
3. Place an order.
To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service.
Contact information is available at: http://www.hidglobal.com/customer-service
Need credentials? This reader could support (depending on options chosen above) the following credentials:
•
iCLASS Seos
•
iCLASS
•
HID Prox
•
MIFARE DESFire EV1
•
MIFARE Classic
Page 18 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE U90 - UHF Long Range Reader
Application: Designed for vehicle access control installations which require long range authentication and high throughput
Technologies Supported: Ultra High Frequency (UHF) EPC GEN 2
1. Select one option from each section below to construct part number:
Reader Model (Select one model)
RDRSEU90 - Model U90 - Contactless Smart Card Long Range Reader: Surface or Pole Mount.
Antenna Code (Select one option, see table below)
8
9
Country
Operating
Frequency
Antenna
Code
Country
Operating
Frequency
Antenna
Code
Country
Operating
Frequency
Antenna
Code
Argentina
902 - 928MHz
9
Estonia
865 - 868MHz
8
Mexico
902 - 928MHz
9
Austria
865 - 868MHz
8
Finland
865 - 868MHz
8
Netherlands
865 - 868MHz
8
Australia
915 - 928MHz
9
France
865 - 868MHz
8
New Zealand
921.5 - 928MHz
9
Belgium
865 - 868MHz
8
Germany
865 - 868MHz
8
Poland
865 - 868MHz
8
Brazil
902 - 928MHz
9
Greece
865 - 868MHz
8
Portugal
865 - 868MHz
8
Bulgaria
865 - 868MHz
8
Hungary
865 - 868MHz
8
Romania
865 - 868MHz
8
Canada
902 - 928MHz
9
India
865 - 867MHz
8
Slovakia
865 - 868MHz
8
China
921 - 924MHz
9
Ireland
865 - 868MHz
8
Slovenia
865 - 868MHz
8
Columbia
902 - 928MHz
9
Italy
865 - 868MHz
8
Spain
865 - 868MHz
8
Croatia
865 - 868MHz
8
Latvia
865 - 868MHz
8
Sweden
865 - 868MHz
8
Cyprus
865 - 868MHz
8
Lithuania
865 - 868MHz
8
United Arab Emirates
865 - 868MHz
8
Czech Republic 865 - 868MHz
8
Luxembourg 865 - 868MHz
8
United Kingdom
865 - 868MHz
8
Denmark
8
Malta
8
United States
902 - 928MHz
9
865 - 868MHz
865 - 868MHz
Color
K - Black
Keyset (Select one option)
NOTE: Keyset is factory-configured only and cannot be configured in the field, via web interface or configuration cards.
0 - Standard Keyset
E - HID Elite keyset - reads only HID Elite credentials with corresponding keyset. Line item on PO requires ICE reference number.
2. Enter the numbers/letters from the selections above into the table below.
The resulting “Final Part Number” is used when ordering reader.
Product Class
Product Sub Class
Base Reader
Antenna Code
8
Example
RDR
SE
U90
Final Part Number
RDR
SE
U90
Color
K
K
Keyset
0
Configuration Setting
0000
0000
3. Place an order.
To place an order for this product, authorized channel partners may submit a purchase order to HID Global Customer Service.
Contact information is available at: http://www.hidglobal.com/customer-service.
Need credentials? This reader supports the following credentials:
•
UHF cards
•
UHF + iCLASS cards
December 2017
Page 19 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Reader Accessories
Programming Cards
Use these cards for customer reader configuration. Readers may be reconfigured to a target configuration by applying the correct target configuration. Use the following link to access the
iCLASS SE Configuration Worksheet www.hidglobal.com/node/19914 to determine the exact configuration required. Apply changes to the reader security using programming cards. Contact HID
Technical Support (www.hidglobal.com/support) to ensure selecting the proper settings.
Part Number
Description
Base Part No.
HID Elite (E) or Standard Security (0 or 2)
Reader Configuration Cards
Reconfigure reader to factory configuration settings
(does not reconfigure reader admin or credential keys)
HID Elite Upgrade Cards3
Setup iCLASS SE or multiCLASS SE® eaders for HID Elite
credential keys or Reader admin keys
HID Elite Downgrade Cards3
Setup iCLASS SE or multiCLASS SE readers for standard
credential keys or reader admin keys
Configuration Settings1
-XXXX = Specific configuration
SEC9X-CRD-
E = HID Elite Key2
0 = Standard-1 key or standard-2 key2
-0000 = Factory configuration (Rx models)
-0001 = Factory configuration (RPx models)
-0002 = Factory configuration (RKx models)
-0003 = Factory configuration (RPKx models)
E = HID Elite Key4
-P000 = HID Elite reader admin keys
E = HID Elite Key2
-P001 = HID Elite credential keys
SEC9X-CRD2
E = HID Elite Key
-P002 = Standard reader admin keys
0 = Standard-1 key or standard-2 key
-P003 = Standard-1 credential keys
-P004 = Standard-2 credential keys
SEC9X-CRD-
Configuration Settings
All standard readers ship with the following features - 13.56MHz interpreter “T” enabled, Wiegand “N” enabled, and Standard-1 “0” security keys enabled. ANY other option selected requires a specific configuration EXTENSION. To order non-standard configuration
options, use the following link to access the iCLASS SE Configuration Worksheet https://www.hidglobal.com/node/19914. Your HID Global Support or Sales representative can help you determine your final configuration.
Standard configuration includes: LED normally Red + Reader beeps / flashes LED green on card read + Intelligent Power Management = Off + Keypad Output is 4-bit (if keypad reader)
Note: Reader configuration cards change settings in an additive fashion. Configuration card settings only overwrite old settings for the options selected. Reader settings that have not been selected for the configuration retain their original values.
To reset reader settings to factory defaults, use a factory default configuration card first, then apply the new configuration with the provided reader configuration card.
2 Keys
Specify HID Elite “E” or Standard-1/Standard-2 ”0” based upon keys ALREADY LOADED in the reader that needs to be configured.
3 HID Elite Upgrade and Downgrade Cards
Reader admin keys and reader credential keys must both be changed to upgrade or downgrade to or from Elite. A separate card is required for reader admin keys and reader credential keys. A Reader Configuration Card with specific configuration extension SEC9X0/E-XXXX or SEC9X-0/E-XXX(0, 1, 2, 3) is also be required to modify configuration options other than Elite keys, for example modification of125 kHz or 13.56 MHz interpreters.
4 Keys
Specify HID Elite “E” based upon HID Elite keys TO BE LOADED in the reader that needs to be configured.
1
Page 20 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
Accessories
The following provides accessories that can be ordered separately for your iCLASS SE and multiCLASS SE readers.
Part Number
Description
Mounting Plates, Spacers, Screws and Accessory Kits
MDP-00354
R10 / RP10 (or equivalent sized model) Mini Mullion Reader Mounting Plate, Black
6309-103-01
R15 / RP15 (or equivalent sized model) Mullion Reader Mounting Plate, Black
6403-109-01
R40 / RP40 (or equivalent sized model) Wall Switch Reader Mounting Plate, Black
6094-101-01
RK40 / RPK40 (or equivalent sized model) Wall Switch Keypad Reader Mounting Plate, Black
6132AKB
R10 / RP10 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Black
6132AKC
R15 / RP15 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Black
6132AKT
R40 / RP40 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Black
6132AKU
RK40 / RPK40 (or equivalent sized model) Reader Spacer, 12.7mm (0.5 in), Black
6132AKE
R40 / RP40 (or equivalent sized model) Reader Spacer, 25.4mm (1.0 in), Black
6132AK
RK40 / RPK40 (or equivalent sized model) Reader Spacer, 25.4mm (1.0 in), Black
6132AKR
RM40 / RMK40 (or equivalent sized model) Reader Spacer, Angled, Black
6132AKP
RM40 / RMK40 (or equivalent sized model) Reader Spacer, 25.4mm (1.0 in), Black
6715-305-01
R95A Reader, Cover Assembly, Décor, Euro, White
6715-305-04
R95A Reader, Cover Assembly, Décor, Euro, Black
MDP-00038
R95A Reader, Cover Assembly, Décor, Euro, Grey
400-2D71-06
High Security Screw, Spanner
6706-303-03
Pigtail Accessory Kit (includes terminal blocks, screws, and installation guide)
6706-303-04
Terminal Reader Accessory Kit (includes terminal blocks, screws, and installation guide)
MDP-01033
multiCLASS SE Mag Stripe RM40 mounting plate replacement kit
MDP-01034
multiCLASS SE Mag Stripe RMK40 mounting plate replacement kit
MDP-01035
multiCLASS SE Mag Stripe RM40/RMK40 magnetic head replacement kit
6132AKB-M
R10 / RP10 BLE Reader Spacer, 12.7mm (0.5 in), Metallic Insert, Black
6132AKC-M
R15 / RP15 BLE Reader Spacer, 12.7mm (0.5 in), Metallic Insert, Black
6132AKT-M
R40 / RP40 BLE Reader Spacer, 12.7mm (0.5 in), Metallic Insert, Black
6132AKE-M
R40 / RP40 BLE Reader Spacer, 25.4mm (1.0 in), Metallic Insert, Black
6132AKU-M
RK40 / RPK40 BLE Reader Spacer, 12.7mm (0.5 in), Metallic Insert, Black
MME-00118
R10 / RP10 BLE Reader Metallic Insert with Adhesive (order in conjunction with spacer or mounting plate)
MME-00119
R15 / RP15 BLE Reader Metallic Insert with Adhesive (order in conjunction with spacer or mounting plate)
MME-00121
R40 / RP40 BLE Reader Metallic Insert with Adhesive (order in conjunction with spacer or mounting plate)
MME-00122
RK40 / RPK40 BLE Reader Metallic Insert with Adhesive (order in conjunction with spacer or mounting plate)
December 2017
Page 21 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
IP65 Upgrade Kit
For Upgrading iCLASS SE Readers to IP65 Ingress Protection in the Field IP65 Kit Description (10) Pieces Per Kit
Part Number
IP65 Gasket Kit, (10) pcs per kit. For use with model R10
IP65GSKT-R10
IP65 Gasket Kit, (10) pcs per kit. For use with model R15
IP65GSKT-R15
IP65 Gasket Kit, (10) pcs per kit. For use with model R40
IP65GSKT-R40
IP65 Gasket Kit, (10) pcs per kit. For use with model RK40
IP65GSKT-RK40
UHF Credential Card Holder
For Proper Placement and Attachment of UHF Credentials to Inside of Car Windshield
Part Number
Windshield Mount, suction cup, adhesive for ID 1 style credential, Blue (Qty 10)
WSHLDMT-BLU
Windshield Mount, suction cup, adhesive for ID 1 style credential, Clear (Qty 10)
WSHLDMT-CLR
Windshield Mount, suction cup, adhesive for ID 1 style credential, White (Qty 10)
WSHLDMT-WHT
Windshield Mount, suction cup, adhesive for ID 1 style credential, Blue (Qty 250)
WSHLDMT-BLU-BULK
Windshield Mount, suction cup, adhesive for ID 1 style credential, Clear (Qty 250)
WSHLDMT-CLR-BULK
Windshield Mount, suction cup, adhesive for ID 1 style credential, White (Qty 250)
WSHLDMT-WHT-BULK
Suction Cups for WSHLDMT - Kit contains (200) cups
WSHLDMT-CUPS
Double sided tape for WSHLDMT - Kit contains (200) pieces
WSHLDMT-TAPE
Page 22 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Readers
iCLASS SE has superseded the majority of iCLASS reader functionality. The remaining specialty models and applications continue to exist on the iCLASS line until an SE replacement is made
available.
iCLASS Read/Write Reader - 6141 / 6111 / 6121 / 6131
Card Reader Description
Base Part Current
Color
No.
Rev. No.* Options
iCLASS RW150 Contactless Smart Card Reader/Writer:
Read/Write
Mullion Mount
Wiegand and RS-232 or RS-485 or USB or UART
(RoHS Compliant)
6141
C
iCLASS RW300 Contactless Smart Card Reader/Writer:
Read/Write
European and Asian Back Box Mount
Wiegand and RS-232 or RS-485 or USB or UART
(RoHS Compliant)
6111
C
G = Gray
K = Black
iCLASS RW400 Contactless Smart Card Reader/Writer:
Read/Write
US, European and Asian Back Box Mount
Wiegand and RS-232 or RS-485 or USB or UART
(RoHS Compliant)
6121
C
K = Black
iCLASS RWK400 Contactless Smart Card Reader/Writer:
Read/Write, with Keypad
US, European and Asian Back Box Mount
(RoHS Compliant)
Wiegand Output, and/or RS-232/422 or USB or UART
6131
C
G = Gray
K = Black
G = Gray
Hardware Options1
T = RS232
4 = RS485(Full-Duplex
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex
M = RS485(Half-Duplex)
U = USB
B = UART to UART
Configuration
iCLASS
MIFARE CSN4 Wiegand
Setting Options2 Security3 Output Mode
00
03
06
01 02
04 05
07
0
1
C
D
00
03
06
01 02
04 05
07
0
1
C
D
00
03
06
01 02
04 05
07
0
1
C
D
00
03
06
01 02
04 05
07
0
1
C
D
0
1
2
3 4 5 6 Z
0
1
2
3 4 5 6 Z
0
1
2
3 4 5 6 Z
0
1
2
3 4 5 6 Z
Keypad Configuration
Setting Options5
Optional
Custom6
For Keypad
readers only
-XXXX Y
For Keypad
readers only
-XXXX Y
For Keypad
readers only
-XXXX Y
00
11
20
-XXXX Y
09
14
22
10
19
23
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 All the following communication modules allow host driven communication using the iCLASS Serial Protocol. All the following communication modules (except USB) allow for card ID reporting instantiated by the reader. For multi-drop functionality, see iCLASS OSDP
Readers. All Reader/Writers are terminal strip readers. RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
2Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read
03 = Beep off, LED normally off, reader flashes green on tag read
06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read
04 = Beep on, LED normally red, host must flash green
07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read
05 = Beep off, LED normally red, host must flash green
3 iCLASS Security options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = HID Elite Key (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Custom with Open Collector Tamper enabled
4 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable). Refer to the "iCLASS Reader Wiegand Output Configuration Guide” for more details. (SETTING NOT APPLICABLE WITH HID ELITE ORDERS. HID ELITE
READERS DO NOT READ MIFARE CSN.)
0 = 32 bit
1 = 32 bit reverse (Same as 6055A and 6055BXX0011)
2 = 26 bit
3 = 34 bit
4 = 40 bit
5 = 37 bit
6 = 56 bit
Z = CSN Suppressed
5 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message
09 = Buffer one key, add compliment, 8 bit message (Dorado)
10 = Buffer six keys and add parity
11 = Buffer one key and add parity
14 = Buffer one to five keys (Standard 26 bit output)
19 = Buffer four keys and add parity
20 = Single Key buffering
23 = Buffer one to 11 keys
6 Contact Factory for pricing, availability, and minimum order quantity.
December 2017
Page 23 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
EDGE® Reader - EDGE EVO Solo
EDGE EVO® Solo Model and Description
Image
Base Part Rev Color
Hardware Configuration
Additional
Configuration
ESH400-K Standard Controller
Single door, IP-based controller for single-door solo-based system. Single physical
package. Door inputs/outputs are 4 external inputs, 2 outputs; on-board optical tamper
(standard mount). One Wiegand / Clock-and-Data reader interface. For use indoor or
outside in weatherproof enclosure. US single-gang, US double-gang or EU/APAC 60mm
mount.
83000
C
K = Black
E = Externally-mounted reader
K = Black
I = Integrated controller / reader, 000 = LED normally Red,
with segregated module
Flash Green and beep on
(separate physically installed
card read
device) containing discrete IO
K=Black
L = Integrated controller /
reader, with segregated module
(separate physically installed
device) containing single
discrete lock output
ESHR40-K Standard Controller / Reader and Module
Single door, IP-based controller with integrated R40 iCLASS reader for single-door solobased system. Two physical packages; IP-based reader for mount at access point and
“Door Module” with interface to 4 external inputs, 2 outputs; optical tamper. Second
reader possible an additional IO interface module (EWM-M or EDWM-M). For indoor use.
Door Module mounted in secure location. US Single-gang or EU/APAC 60mm mount.
83120
C
ESHR40-L Single-Output Controller / Reader and Module
Single door, IP-based controller with integrated R40 iCLASS reader for single-door solobased system. Two physical packages; IP-based reader for mount at access point and
“Lock Module” with interface single (1) lock output. For indoor use. Door Module
mounted behind reader in US Single-gang box, in hollow door frame or other secure
location. Reader is US Single-gang or EU/APAC 60mm mount.
83120
C
ESHRP40-K Standard Controller / Reader and Module
Single door, IP-based controller with integrated RP40 multiCLASS® reader for singledoor solo-based system. Two physical packages; IP-based reader for mount at access
point and “Door /Wiegand Module” with interface to 4 external inputs, 2 outputs and one
Wiegand / Clock-and-Data reader interface; Second reader possible using Wiegand
reader. Optical tamper (standard mount). For indoor use. Door / Wiegand Module
mounted in secure location. US Single-gang or EU/APAC 60mm mount.
EWM-M Wiegand Module
The “Wiegand Module” enables controller interface to one (1) Wiegand / Clock-and-Data
reader interface. For use indoor or outside in weatherproof enclosure.
000 = LED normally Red,
Flash Green and beep on
card read
83125
C
K = Black
I = Integrated controller / reader,
with segregated module
000 = LED normally Red,
(separate physically installed
Flash Green and beep on
device) containing discrete IO
card read
and Wiegand reader interface
for second reader
83360
A
K = Black
M = Mountable on US singlegang, EU / APAC 60mm
electrical box
For custom Indala Prox support, add a “-D” to the end of the EHR40-K, EHR40-L or EHRP40-K part number, and specify the Indala format to be programmed into the reader.
Page 24 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Reader Accessories
Part No.
Description
iCLASS Reader Accessories
6303-104-01
Mini-Mullion Reader Mounting Plate for iCLASS SE R10, RP10 and iCLASS RW100
6309-103-01
Mullion Reader Mounting Plate for iCLASS SE R15 and RP15
6402-103-01
EU/Asian Reader Mounting Plate for iCLASS RW300
6403-109-01
Wall Switch Reader Mounting Plate for iCLASS SE R40, RP40 and iCLASS RW400
6094-101-01
Wall Switch Keypad Reader Mounting Plate for iCLASS SE RK40, RPK40 and iCLASS RWK400
6132AKB
Mini-Mullion Reader Spacer for iCLASS SE R10, RP10 and iCLASS RW100, Black
6132AKC
Mullion Reader Spacer for iCLASS SE R15, RP15, Black
6132AKD
EU/Asian Reader Spacer for iCLASS RW300, Black
6132AKE
iCLASS Wall Switch Reader Spacer, Black (works with R40, RP40, RW400)
6132AK
iCLASS Wall Switch Keypad Reader Spacer, Black (works with RK40, RPK40, RWK400)
400-2D71-06
iCLASS reader security screw (Qty 1)
December 2017
Page 25 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
HID Proximity Readers
ProxPoint Plus Proximity Reader - 6005 / 6008
Card Reader Description
ProxPoint® Plus Proximity Reader
with Wiegand output
with Clock and Data output
Base Part
No.
6005
6008
Current
Rev. No.*
B
B
Color Options
Hardware Options
Configuration
Setting Options¹
Custom²
G = Classic Charcoal Gray
B = Classic Beige
W = Classic White
K = Classic Black
1 = Designer Black
2 = Designer Charcoal Gray
4 = Designer Wave Blue
5 = Designer White
B = Pigtail (18 inches/45.7 cm)
L = Long Pigtail (9 feet/3 meters)3
00
01
02
03
XXXX Y
04
05
06
07
*Revision numbers and availability are subject to change without notice.
Notes:
1 Configuration Setting Options are as follows (factory programmed):
00 = Beep on, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green
01 = Beep off, LED normally red, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
02 = Beep on, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
03 = Beep off, LED normally off, reader flashes green on tag read 07 = Beep off, LED normally off, host must flash red and/or green
2 Consult Factory
3 An optional 9 foot pigtail is available through our HID European office and can also be available in the Americas and Asia Pacific regions via special order of 2,500 unit minimum order quantity. Call the HID factory for pricing and lead-times.
To order, specify the following:
Card Reader Description
Page 26 of 105
Base Part
No.
Current
Rev. No.*
Color Options
Hardware Options
Configuration
Setting Options
Custom
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
MiniProx Proximity Reader - 5365 / 5368
Card Reader Description
MiniProx® Proximity Reader
with Wiegand output
with Clock and Data output
Base Part
No.
5365
5368
Current
Rev. No.*
E
E
Color Options
G = Classic Charcoal Gray
B = Classic Beige
W = Classic White
K = Classic Black
1 = Designer Black
2 = Designer Charcoal Gray
4 = Designer Wave Blue
5 = Designer White
Hardware Options
P = Pigtail (18 inches/45.7 cm)
T = Terminal Strip
H = Hazardous back box³
Configuration
Setting Options¹
Custom²
00
01
02
03
XXXX Y
04
05
06
07
*Revision numbers and availability are subject to change without notice.
Notes:
1 Configuration Setting Options are as follows (factory programmed):
00 = Beep on, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green
01 = Beep off, LED normally red, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
02 = Beep on, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
03 = Beep off, LED normally off, reader flashes green on tag read 07 = Beep off, LED normally off, host must flash red and/or green
2 Consult Factory
3 The hazardous back box option MiniProx is available in gray Terminal Strip only.
To order, specify the following:
Card Reader Description
December 2017
Base Part
No.
Current
Rev. No.*
Color Options
Hardware Options
Configuration
Setting Options
Custom
Page 27 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
ProxPro Family Proximity Reader - 5455 / 5458 / 5355 / 5352 / 5358
ProxPro Family Card Reader
Description
ProxPro II Proximity Reader
with Wiegand output
with Clock & Data Output
Base
Part No.
5455
5458
ProxPro Proximity Reader5,6
with Wiegand output
with Clock & Data Output
Current
Rev. No.*
Color Options
B
G = Charcoal Gray
B = Beige
W = White
K = Black
5355
5358
A
ProxPro Proximity Reader with Serial
output7
G = Charcoal Gray
B = Beige
Hardware Options
Configuration
Setting Options¹
Custom²
N = No Keypad, Pigtail (18 inches/45.7 cm)
00
01
02
03
04
05
06
07
XXXX Y
00
10
14
20
09
11
19
21
23
XXXX Y
00
10
14
20
09
11
19
21
23
N = No Keypad, Terminal Strip
K = Keypad3, Terminal Strip
S = Keypad4, Terminal Strip
5352
*Revision numbers and availability are subject to change without notice.
1 ProxPro II Configuration Setting Options are as follows (factory programmed):
00 = Beep on, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green
01 = Beep off, LED normally red, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
02 = Beep on, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
03 = Beep off, LED normally off, reader flashes green on tag read 07 = Beep off, LED normally off, host must flash red and/or green
2 Consult Factory
3 ProxPro Reader with Keypad (Hardware Option K Version): data is outputted over shared Wiegand cable. Reader processes keystrokes.
4 ProxPro Reader with Keypad (Hardware Option S Version): (3 x 4 Matrix) requires additional 7 conductor keypad cable. Control panel processes keystrokes
5 ProxPro Configuration Setting options are as follows (factory programmed):
00 = Buffer one key, no parity, 4 bit message
14 = Buffer one to five keys (Standard 26 bit output)
09 = Buffer one key, add compliment, 8 bit message (Dorado)
19 = Buffer four keys and add parity
10 = Buffer six keys and add parity
20 = Single Key buffering
11 = Buffer one key and add parity
21 = Supervision Mode
23 = Buffer one to 11 keys
6 ProxPro reader Configuration Settings are selected by the customer via dip switch settings. 00 = LED normally red, reader flashes green on tag reads.
7 ProxPro Serial output reads cards with up to 37-bit formats, and outputs RS232, RS422, and RS485.
Optional Glass Mount Kit for ProxPro and ProxPro II Readers = 5455AGM00.
To order specify the following:
Card Reader Description
Page 28 of 105
Base Part No.
Current Rev. No.*
Color Options
Hardware Options
Configuration Setting Options
Custom
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
ThinLine II Proximity Reader - 5395 / 5398
Card Reader Description
ThinLine II® Proximity Reader
with Wiegand output
with Clock and Data output
Base Part
No.
5395
5398
Current
Rev. No.*
Color Options
G = Classic Charcoal Gray
B = Classic Beige
W = Classic White
K = Classic Black
1 = Designer Black
2 = Designer Charcoal Gray
4 = Designer Wave Blue
5 = Designer White
C
Hardware Options
1 = Pigtail (18 inches/45.7 cm)
Configuration
Setting Options¹
00
01
02
03
04
05
06
07
Custom²
XXXX Y
*Revision numbers and availability are subject to change without notice.
Notes:
1 Configuration Setting Options are as follows (factory programmed):
00 = Beep on, LED normally red, reader flashes green on tag read
01 = Beep off, LED normally red, reader flashes green on tag read
02 = Beep on, LED normally off, reader flashes green on tag read
03 = Beep off, LED normally off, reader flashes green on tag read
2 Consult Factory
04 = Beep on, LED normally red, host must flash green
05 = Beep off, LED normally red, host must flash green
06 = Beep on, LED normally off, host must flash red and/or green
07 = Beep off, LED normally off, host must flash red and/or green
To order specify the following:
Card Reader Description
December 2017
Base Part
No.
Current
Rev. No.*
Color Options
Hardware Options
Configuration
Setting Options
Custom
Page 29 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
MaxiProx Proximity Reader - 5375
Card Reader Description
MaxiProx® Proximity Reader
Base Part
No.
5375
Current
Rev. No.*
A
Color Options
Hardware Options
G = Charcoal Gray
N = None
Configuration
Setting Options¹
00
Custom²
XXXX Y
*Revision numbers and availability are subject to change without notice.
Notes:
1 Configuration Setting 00 = LED normally red, reader flashes green on tag reads.
The MaxiProx reader configuration settings are selected by the customer via internal dip switch settings.
2 Consult Factory
To order specify the following:
Card Reader Description
Page 30 of 105
Base Part
No.
Current
Rev. No.*
Color Options
Hardware Options
Configuration
Setting Options
Custom
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
EntryProx Proximity Reader - 4045
Card Reader Description
EntryProx™ Proximity Reader
Stand-Alone Access Control Unit
Base Part
No.
4045
Current
Rev. No.*
C
Color Options
Hardware Options
G = Charcoal Gray
N = None
Configuration
Setting Options¹
U0
Custom²
XXXX Y
*Revision numbers and availability are subject to change without notice.
Notes:
1 Configuration Setting U0 = LED normally red, reader flashes green on tag reads.
2 Consult
Factory
To order specify the following:
Card Reader Description
December 2017
Base Part
No.
Current
Rev. No.*
Color Options
Hardware Options
Configuration
Setting Options
Custom
Page 31 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
HID Proximity Reader Accessories
Part No.
Description
ProxPro Family
5455AGM00
Glass Mount Kit, ProxPro and ProxPro II Readers
5350-113-01
Bezel, ProxPro Reader with Keypad (Rev. A) - Charcoal Gray
5350-113-02
Bezel, ProxPro Reader (Rev. A) - Charcoal Gray
5350-113-03
Bezel, ProxPro Reader with Keypad (Rev. A) - Beige
5350-113-04
Bezel, ProxPro Reader (Rev. A) - Beige
5355A-302-01
Cover, ProxPro w/Keypad Reader (Rev. A) - Charcoal Gray
5355A-302-02
Cover, ProxPro Reader (Rev. A) - Charcoal Gray
5355A-302-03
Cover, ProxPro w/Keypad Reader (Rev. A) - Beige
5355A-302-04
Cover, ProxPro Reader (Rev. A) - Beige
5350-101-01
Base, ProxPro Reader (Rev. A) - Charcoal Gray
5350-101-02
Base, ProxPro Reader (Rev. A) - Beige
5355A-306-01
ProxPro Keypad assembly upgrade, K Version, (Rev. A) - Gray Cover only
5355A-306-02
ProxPro Keypad assembly upgrade, K Version, (Rev. A) - Beige Cover only
5355A-306-03
ProxPro Keypad assembly upgrade, S Version, (Rev. A) - Gray Cover only
5355A-306-04
ProxPro Keypad assembly upgrade, S Version, (Rev. A) - Beige Cover only
5355A-306-05
ProxPro Keypad assembly upgrade, K Version, (Rev. A) - Gray Cover and Bezel
5355A-306-06
ProxPro Keypad assembly upgrade, K Version, (Rev. A) - Beige Cover and Bezel
5355A-306-07
ProxPro Keypad assembly upgrade, S Version, (Rev. A) - Gray Cover and Bezel
5355A-306-08
ProxPro Keypad assembly upgrade, S Version, (Rev. A) - Beige Cover and Bezel
5455-311-01
Cover, ProxPro II Reader (Rev. B) - Charcoal Gray (No Bezel Required)
5455-311-02
Cover, ProxPro II Reader (Rev. B) - Beige (No Bezel Required)
5455-311-03
Cover, ProxPro II Reader (Rev. B) - Black (No Bezel Required)
5455-311-04
Cover, ProxPro II Reader (Rev. B) - White (No Bezel Required)
30-0003-01
Rubber Keypad Cover, ProxPro Reader (Rev. A)
137-0005-11
Connector Feed Back Nut and Washer, ProxPro Reader (Rev. A)
MiniProx
5365-371-01
Classic cover, MiniProx Reader (Rev. E) - Charcoal Gray
5365-371-02
Classic cover, MiniProx Reader (Rev. E) - Beige
5365-371-03
Classic cover, MiniProx Reader (Rev. E) - Black
5365-371-04
Classic cover, MiniProx Reader (Rev. E) - White
New Look
1
5365-372-01
Designer cover, MiniProx Reader (Rev. E) - Black
5365-372-02
Designer cover, MiniProx Reader (Rev. E) - Charcoal Gray
5365-372-04
Designer cover, MiniProx Reader (Rev. E) - Wave Blue
5365-372-05
Designer cover, MiniProx Reader (Rev. E) - White
ThinLine II
5395-104-01
Classic cover, ThinLine II Reader (Rev. C) - White
5395-104-02
Classic cover, ThinLine II Reader (Rev. C) - Beige
5395-104-03
Classic cover, ThinLine II Reader (Rev. C) - Black
Page 32 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
Part No.
Description
5395-104-04
New Look
Classic cover, ThinLine II Reader (Rev. C) - Charcoal Gray
2
5395-371-01
Designer cover, ThinLine II Reader (Rev. C) - Black
5395-371-02
Designer cover, ThinLine II Reader (Rev. C) - Charcoal Gray
5395-371-04
Designer cover, ThinLine II Reader (Rev. C) - Wave Blue
5395-371-05
Designer cover, ThinLine II Reader (Rev. C) - White
MaxiProx
5370A-305-01
Cover, MaxiProx Reader (Rev. A) - Gray
5375-303-01
Accessory Kit, MaxiProx Reader (Old wiring Diagram) (Rev. A)
5375-313-01
Accessory Kit, MaxiProx Reader (New wiring Diagram) (Rev. A)
56-0002-01
MaxiProx Reader Rubber Gasket (Rev. A)
ProxPoint Plus
6005-111-01
Classic cover, ProxPoint Plus Reader (Rev. B) - White
6005-111-02
Classic cover, ProxPoint Plus Reader (Rev. B) - Beige
6005-111-03
Classic cover, ProxPoint Plus Reader (Rev. B) - Black
6005-111-04
Classic cover, ProxPoint Plus Reader (Rev. B) - Charcoal Gray
New Look 3
6005-312-01
Designer cover, ProxPoint Plus Reader (Rev. B) - Black
6005-312-02
Designer cover, ProxPoint Plus Reader (Rev. B) - Charcoal Gray
6005-312-04
Designer cover, ProxPoint Plus Reader (Rev. B) - Wave Blue
6005-312-05
Designer cover, ProxPoint Plus Reader (Rev. B) - White
Other
4045-390-03
EntryProx Spare Parts Accessories Kit
4045-303-01
EntryProx Reader Replacement Antenna
6020-302-01
Accessory Kit, HSM
33-0001-01
RELAY, 1.00A-24VDC , SPDT-1 FO
57-0001-02
Key Ring for ProxKey (Keyfob)
1
MiniProx Covers will only fit MiniProx readers with removable covers series (Model # 5365E or later), and will NOT fit older versions with electronics potted into the cover (Model #s 5365A, 5365B,
nor 5365C).
2
Thinline II Designer Covers will only fit Thinline II readers (Model # 5395C or later), and will NOT fit Thinline II readers (Model #s 5395A nor 5395B).
3
ProxPoint Plus Designer Covers will fit all ProxPoint Plus readers (Model # 6005B or later), and will NOT fit ProxPoint readers (Model # 6005A).
December 2017
Page 33 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
Indala Proximity Readers
Overview
Every part number consists of a base model number to indicate the type of product, and a letter or number to indicate each product option.
Each product has a standard part number that includes default options, as indicated on the order guide. When an order is placed for a
product, the base model number and all options must be specified. If you require any options that are different from the default options, you
must also indicate those options at the time the order is placed. All part numbers must be complete to be accepted by HID’s order entry
system.
All reader orders must have the following information:
•
BASE MODEL NUMBER
•
STYLE
•
READ RANGE
•
TYPE
•
COLOR
•
OUTPUT FORMAT (reader’s format or format number must also be given at time of order)
Advantage Series Reader - ASR 620
Part Number
Description
ASR-620++
Long Range Reader
ASR-620++/L
Long Range Reader
Page 34 of 105
Notes
w/10 foot (3 meter) cable
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
FlexPass™ Reader - FP Arch / Keypad
FP
3 5 1 1 A /L
BASE NUMBER
STYLE
READ RANGE
TYPE
COLOR
OUTPUT FORMAT
CABLE LENGTH
BASE NUMBER
FP = FlexPass (reader format required)
STYLE
3 = Arch
5 = Keypad
0 = Core Electronics Module
READ RANGE
5 = 5 in. (13 cm.) - available in STYLES: Arch, TYPES: Slim and Wall switch
2 = 12 in. (30 cm.) - available in STYLES: Arch TYPE: Midrange
0 = 4 in. (10 cm.) - available only in STYLE: Keypad; TYPE: Keypad
TYPE
1 = Slim - available in STYLES: Arch
2 = Wall switch - available in STYLES: Arch
3 = Midrange - available in STYLES: Arch
6 = Membrane Keypad - available only in STYLE: Keypad
0 = Module only
COLOR
1 = Black - available in STYLES: Arch TYPES: Slim, Wall switch, Midrange, Classic
0 = N/A
OUTPUT FORMAT
Note: Aside from choosing below, specify reader’s format or format no. (e.g. 26-bit Wiegand or format no. 10022).
A = Standard Wiegand - available in all STYLES and TYPES
S = Serial - available in STYLES: Arch TYPE: Midrange
B = Buffered or 8-Bit Burst (must be specified) - available only in Keypad STYLE and TYPE (Membrane or Heavy
Duty)
M = 3 X 4 Matrix
CABLE LENGTH
The default cable length for Indala modules is 18 inches (46 cm). No entry is needed for an 18 inch cable.
For Reader Cores an optional 10 ft (3 m) pigtail is available through the HID European, America and Asia Pacific
offices. Requires a minimum 2,500 unit order quantity. Place /L in the 7th position for ordering the 10 ft (3 m) cable.
Note: Do not order Reader Packages with the 10 ft (3 m) cable. When ordering the 10 ft (3 m) cable, bezels must be
ordered separately. Call Customer Service for assistance.
December 2017
Page 35 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
FlexPass Accessories
Part Number
Description
21211-001
21212-001
FPZ1231A
FPZ1234A
FPZ1511A
FPZ1514A
FPZ1521A
FPZ1524A
FPZ2511A
FPZ2521A
FPZ3231A
FPZ3235A
FPZ3236A
FPZ3237A
FPZ3511A
FPZ3515A
FPZ3516A
FPZ3517A
FPZ3521A
FPZ3521H
FPZ3525A
FPZ3526A
FPZ3527A
FPZ3527H
FPZ4511A
FPZ-4511A
FPZ4517A
FPZ4521A
FPZ4525A
FPZ4526A
FPZ4527A
FPZ4551A
FPZC1511H
FPZC1514H
FPZC1524H
KIT-AFP1000-2005
KIT-AFP1000-2005-A/R
XXZ112
XXZ122
XXZ321
SH-003
Enclosure Base, ASR-620
Enclosure Cover, ASR-620++
Bezel Wave Style, Midrange Type, Black
Bezel Wave Style, Midrange Type, Blue
Bezel Wave Style, Slim Type, Black
Bezel Wave Style, Slim Type, Blue
Bezel Wave Style, Wallswitch Type, Black
Bezel Wave Style, Wallswitch Type, Blue
Bezel Curve Style, Slim Type, Black
Bezel Curve Style, Wallswitch Type, Black
Bezel Arch Style, Midrange Type, Black
Bezel Arch Style, Midrange Type, Grey
Bezel Arch Style, Midrange Type, White
Bezel Arch Style, Midrange Type, Beige
Bezel Arch Style, Slim Type, Black
Bezel Arch Style, Slim Type, Grey
Bezel Arch Style, Slim Type, White
Bezel Arch Style, Slim Type, Beige
Bezel Arch Style, Wallswitch Type, Black
Bezel Arch Style, Wallswitch Type, Black (HID)
Bezel Arch Style, Wallswitch Type, Grey
Bezel Arch Style, Wallswitch Type, White
Bezel Arch Style, Wallswitch Type, Beige
Bezel Arch Style, Wallswitch Type, Beige (HID)
Bezel Linear Style, Slim Type, Black
Bezel Linear Slim Black Cover
Bezel Linear Style, Slim Type, Beige
Bezel Linear Style, Wallswitch Type, Black
Bezel Linear Style, Wallswitch Type, Grey
Bezel Linear Style, Wallswitch Type, White
Bezel Linear Style, Wallswitch Type, Beige
Bezel Linear Style, Slim Type, Black
Bezel, HID, Wave, Slim,5, Black
Bezel, HID, Wave, Slim, 5, Blue
Bezel, HID, Wave, Wallswitch, 5, Blue
AFP1000-2005, Upgrade
AFP1000 Advance Replacement
Bezel, Wave, Slim, 5, Blue
Bezel, Wave, W/S, 5, Blue
Bezel, Arch, W/S, Black
Indala Credentials Special Handling, New marking label codes
Notes:
•
To ensure security of the format and cards, a Software License Agreement must be signed by the final user of the 3175BNN00,
3012AKN00, 3012ANS00, and be on file at HID prior to shipment.
•
Developer's Resource CD includes: Serial Protocol Documentation and Developer's Test Program to assist in developing custom
MIFARE software applications.
•
Demo CD Includes: MIFARE Documentation and Sample Application Program.
Page 36 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
HID MOBILE ACCESS
What Is HID Mobile Access?
HID Mobile Access complements any access control solution by enabling building occupants to securely access the facility using Android and
iOS mobile devices. HID Mobile Access, powered by Seos, consists of the following components:
•
HID Secure Identity Services Portal: A cloud-hosted management portal that allows administrators to manage users, devices, and
securely issue/revoke Mobile IDs.
•
HID Mobile Access App: Easily downloaded on Google Play and Apple App Store and proven compatibility with the most popular
mobile phones, tablets, and wearables.
•
Mobile IDs: Powered by Seos credential technology, Mobile IDs are the virtual equivalent of the traditional contactless smart card.
•
iCLASS SE and multiCLASS SE Readers: These flexible readers can be configured to securely authenticate with an organization’s
Mobile ID’s via Bluetooth Smart and/or NFC communication standards.
Creating HID Mobile Access User Account
In order to use HID Mobile Access, an account in the Mobile Access Portal is required. Once an end-user account has been created, the
organization will be able to order products from its Access Control Provider and issue Mobile IDs to its building occupants.
To set up an end-user account please go to https://managedservices.hidglobal.com/faces/maUserOnBoardingStart
After user account creation, the administrator will be given organization-specific identifiers required for ordering and for secure portal access:
Reference
Description
Mobile Keyset
(MOB or ICE)
Mobile Keyset is a reference number for a set of cryptographic keys loaded into a reader. Mobile IDs, Mobile Key
cards, and Mobile Admin cards will securely authenticate only with readers programmed with a matching keyset. An
organization is assigned a Mobile Keyset upon registration into either the HID Elite™ (ICE) or HID Mobile Access
(MOB) programs.
The correct Mobile Keyset must be supplied when ordering mobile-enabled readers, Mobile IDs, Mobile Key cards,
and Mobile Admin cards.
Organization ID
Organization ID is a reference number for a unique account within the Secure Identity Services portal. It is assigned
at the conclusion of account registration.
The correct Organization ID must be supplied when ordering Mobile IDs and Mobile Admin cards.
December 2017
Page 37 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
Ordering Information
Component
Mobile IDs
Details
Mobile IDs are virtual credentials
electronically delivered to the Secure Identity
Services Portal account linked to the
Organization ID. Mobile Keyset assures that
Mobile ID’s will work with the corresponding
iCLASS SE readers. Please provide the
credential access control data format and
related programming information (facility/site
code, card number range etc.)
Supplemental Information
Needed for Order
Part Number
MOBILE-ID
or
MOBILE-ID-TEMP7
(temporary ID with 7-day
validity)
Organization ID:
_______
MOB or ICE:
_______
Format number:
_______
Facility Code:
_______
Card Numbers:
_______
Mobile-Ready
Readers
Mobile-Ready readers are prepared to
support HID Mobile Access but lack the
personalized configuration (Mobile Keyset)
to read an organization’s specific Mobile
ID’s. These readers can be ordered at any
time but will require field activation after the
organization has completed registration for
HID Mobile Access. To support a specific
organization’s Mobile IDs, these readers
need to be personalized (Mobile Keyset
loaded) using a Mobile Key Card.
See iCLASS SE Readers
section of the HTOG
Mobile-Enabled
Readers
Mobile-Enabled readers are fully activated
and personalized to support an
organization’s specific Mobile ID’s. These
readers can only be ordered after the
organization has completed registration for
HID Mobile Access or HID Elite program.
MOB or ICE Mobile Keyset will be required
at time of order.
See iCLASS SE Readers.
section of the HTOG
MOB or ICE:
_______
MOB or ICE:
_______
Organization ID:
_______
MOB or ICE:
_______
Mobile Key
Card
Configuration card used to personalize and
activate a Mobile-Ready reader; converting it
to a Mobile-Enabled reader.
SEC9X-CRD-E-MKYD
Mobile Admin
Card
Configuration card which enables the use of
the Mobile Configuration App used to adjust
Bluetooth range settings on Mobile-Enabled
Readers.
SEC9X-CRD-MADD
Ordering Information for Customers with Custom Part Numbers
Some HID Mobile Access customers have been assigned a unique and organization-specific custom part numbers as described in the table
below.
Component
Mobile IDs
Mobile Admin
Card
Page 38 of 105
Part Number
CRD633ZZ-xxxxx
(xxxxx specific to organization and issued at time of part number creation)
Supplemental Information
Needed for Order
Format number:
_______
Facility Code:
_______
Card Numbers:
_______
SEC9X-CRD-MAD-xxxx
(xxxxx specific to organization and issued at time of part number creation)
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
CREDENTIALS
Understanding HID Credentials
What should I know about security keysets?
iCLASS SE readers and iCLASS Seos / iCLASS SE credentials offer two keyset security schemes, HID Elite and Standard.
The HID Elite Security Program supports a unique keyset on a per site/company basis.
The keyset governs a variety of keys, including:
•
Media (credential) keys for iCLASS SE, SIO-encoded iCLASS, MIFARE Classic (SIO) and MIFARE DESFire EV1 (SIO) credentials
•
SIO authenticity and privacy keys (media independent)
•
Configuration programming keys (for programming reader configuration, also media independent)
When utilizing HID’s standard key set for the above keys, all standard keyed credentials work with all standard keyed readers. Additionally,
any Standard Security configuration card configures a Standard Security reader (only accomplished during the first five (5) seconds after
reader powers-up). Conversely, when utilizing the HID Elite program, only site/company specific HID Elite credentials and programming cards
work with matching readers.
The Standard Security Program provides universal keysets that offer maximized compatibility by keying readers and cards with matching
security for use in the general population. This allows for maximized compatibility because readers and cards are not keyed on a per
site/company basis but rather all keyed the same. This offers the advantage to the integrator as a standard stock of readers and cards will
interoperate for a variety of sites/companies, rather than needing different stocks of readers and cards for each individual site. iCLASS SE
readers provide two Standard Security Keysets that offer compatibility with the following credentials:
Standard Security Keyset
Compatibility with these Credentials
Version 1
iCLASS Seos (+ Prox)
iCLASS SE (+ Prox)
iCLASS SR (+ Prox)
iCLASS (+ Prox)
MIFARE Classic (+ Prox)
MIFARE DESFire EV1 (+ Prox)
Version 2
iCLASS Seos (+ Prox)
iCLASS SE (+ Prox)
MIFARE Classic (+ Prox)
MIFARE DESFire EV1 (+ Prox)
How can I order HID Elite configured credentials?
•
Direct customers of HID must be authorized to purchase components with HID Elite keys. If you are not authorized, you must have
the key owner authorize you through the Authorization form.
See http://www.hidglobal.com/services/secure-identity/credential-programs/iclass-elite-and-se-elite.
•
Ensure the HID Elite flag is set in the part number (of readers, credentials and programming cards).
•
All Purchase Orders for HID Elite components must be ordered with the HID Elite reference number (starts with ICE or MOB).
How can I migrate from my current credential technology?
•
•
iCLASS Existing Sites: When deploying credentials to an existing site with standard iCLASS credentials and readers the following
steps provide a guideline to a recommended path:
1.
Purchasing iCLASS Seos + iCLASS cards along with iCLASS SE Readers - Standard profile with Maximum compatibility
credential support (supporting iCLASS cards), as this provides full interoperability with HID’s latest credential and reader
platform, as well as supporting installed iCLASS base.
2.
This provides options to upgrade security in the future without rip-and-replace of the newly purchased readers
3.
Once all readers on site are iCLASS SE the customer can begin ordering iCLASS Seos only cards.
4.
Once all cards in the population are iCLASS Seos, readers can be configured to support only iCLASS Seos cards.
125 kHz Existing Sites: Deploying credentials to an existing 125 kHz site with HID Prox/Indala Proximity credentials and readers
(HID, Indala, AWID, and EM4102), purchase multi-technology iCLASS Seos or iCLASS SE Credentials, along with multiCLASS SE
Readers for full credential and reader interoperability, and a relaxed migration timeline.
December 2017
Page 39 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
What is the difference between iCLASS Seos, iCLASS SE and iCLASS credentials?
iCLASS Seos credentials deliver enhanced security, data confidentiality and stronger authentication for user data. Seos comprises a generic
card edge (card command interface) to meet the growing demand for interoperability; a secure messaging protocol to protect data
transmission. In addition, Seos provides an open software architecture that is portable to a range of mobile devices and microprocessors. The
credential offers enhanced privacy protection by delivering data confidentiality and integrity between the smart card and the reader to prevent
sensitive/personal data from being intercepted or cloned. iCLASS Seos credentials are only delivered with a single access control data
payload, the SIO, and are not backwards compatible with iCLASS readers.
iCLASS SE credentials come with a single access control data payload, the SIO. iCLASS SE credentials are designed to work in an
installation of iCLASS SE readers only and are not backwards compatible with iCLASS readers.
iCLASS credentials are offered either with or without an encoded SIO. For the SIO encoded option, this card will come with two access
control data payloads: the SIO and iCLASS access control data payload. These credentials provide backward compatibility with currently
deployed systems, maximizing compatibility. iCLASS credentials encoded with SIO should be purchased when the site needs legacy
application support, or when the site plans to eventually migrate to SIO security. iCLASS credentials encoded with SIOs were previously
marketed as iCLASS SR credentials.
iCLASS credentials are designed to work in an existing installation of standard iCLASS readers. iCLASS credentials are compatible with
both iCLASS readers and iCLASS SE readers.*
Works with iCLASS SE
Readers*
Credential Type
Works with iCLASS
Readers
Advantage
iCLASS Seos
Yes
No
Best-in-class security and
privacy protection,
programmable card, portability,
interoperability (standards
based) and usability (read
range).
iCLASS SE
Yes
No
Increased Security
iCLASS, SIO
encoded
(Previously called
iCLASS SR)
Yes (reading SIO or
standard iCLASS access
control application)
Yes (Reading
standard iCLASS
access control
application)
Increased Security when
reading SIO, maximum
compatibility - works with both
iCLASS and iCLASS SE
readers.
iCLASS, without SIO
encoding
Yes
Yes
*Reader support depends on reader model and configuration selected.
Can I configure my Credential product online?
Yes, HID Global is now offering the HID Global Product Configurator. This online tool will guide customers and
partners toward the most suitable product for their needs. This initial launch supports most PACS credential part
numbers. Other products lines, such as with iCLASS SE readers, will be added later. There are two main features
available with this tool:
• Find by part number - allows customers to enter an existing part number to see the specification of this
credential.
• Build a credential - helps customers construct a complete part number, including keyset and formatting
information; everything needed to place an order. Customers will be able to download a PDF with all
specifications of the credential they build to allow for a smooth ordering process.
HID Global Product Configurator: https://www.hidglobal.com/configure
Page 40 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
Credentials Marking
For information on Card Identification Markings, please see the "Card Identification Markings Application note", available for download at
https://www.hidglobal.com/node/23025
Credential Marking Technology
As a part of our commitment to continuous enhancements of world-class products and solutions, HID Global is transitioning to the most
innovative card marking technology available.
HID Global is moving from ink jet card marking to the new laser engraving card marking technology for all Genuine HID® cards, fobs and
authentication tokens. This state-of-the-art laser engraving technology will result in a more appealing look and feel and reduce the ecological
footprint of card production.
Key benefits:
•
Marking quality and durability of the cards will be enhanced and more consistent
•
New engraving technology reflects HID Global’s commitment to sustainability by eliminating the use of solvents
•
Improved Proof of Authenticity since engraved markings cannot be removed or modified.
•
The enhanced design will be available at no additional charge.
Depending on the fulfillment center, customers may receive either inkjet or laser marked credentials during this transition period.
Notes:
•
The numbering scheme and part number for existing part numbers will not change. Please contact your sales representative to see
the new design and get sample cards.
•
Due to the 3D nature of laser engraved markings, printing over these markings is not recommended as it may impact print quality.
•
For further details on the printing areas, please contact HID Global.
Please contact HID Customer Service or Sales Representative if you have additional questions regarding this notice.
December 2017
Page 41 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Seos Credentials [Recommended Technology]
Note: See Understanding HID Credentials on page 39 for guidance.
iCLASS Seos Card - 500
Increased security and interoperability cards for installation supporting iCLASS SE platform. All iCLASS Seos 8K cards are OTP enabled.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
500 Composite 40% Polyester / PVC*
iCLASS Seos Memory Size and Allocation (Select one option)
5 - 16K Bytes
6 - 8K Bytes6
Secure Identity Object® Programming (Select one option)
P - Programmed with Security Identity Object (SIO)
V - Unprogrammed, for use with iCLASS SE Encoder
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe Specify Custom Artwork Number1
Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)
Slot Punch4 (Select one option)
N - No Slot Punch
Packing (Optional)
Y = Seos Programming
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
T - Packs of 10 (shrink wrap) in standard box
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 5005PGGNNT
Final Part Number
500
N
-
(Options #)
iCLASS Seos Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner.
3 The Printed card number is placed in the bottom right-hand corner on the back of the card.
4 Cards are not available with any slot punch option.
5 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
6 Available with 7 byte static UID for ISO14443A UID migration and interoperability. This feature reduces privacy and is not recommended.Contact your local sales or pre-sales representative for
details.
1
2
Page 42 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Seos + iCLASS Card - 522
Migration solution from iCLASS to Seos in iCLASS SE platform. All iCLASS Seos 8K cards are OTP enabled.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
522 Composite 40% Polyester / PVC*
iCLASS Seos and Memory Size and Allocation
6 - 8K Bytes6
iCLASS Memory Size and Allocation (Select one option)
0 - iCLASS 2k Bits (256 Bytes) with 2 Application Areas
3 – CLASS 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 – CLASS 32k Bits (4K Bytes) Application areas 16k/16+16k/1
iCLASS Seos Programming (Select one option)
P - Programmed with Security Identity Object (SIO)
V - Unprogrammed, for use with iCLASS SE Encoder (Must be combined with C option below)
iCLASS Programming (Select one option)
S - Programmed with Security Identity Object (SIO) and with standard iCLASS Access
Control Application (recommended)
P -Programmed with Security Identity Object (SIO)
H - Programmed with standard iCLASS Access Control Application
C - Unprogrammed, for use with iCLASS SE Encoder (Must be combined with V option above)
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
Y = Seos Programming
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
iCLASS Seos Card Numbering3 (Select one option)
N - No Printed Card Numbering
A - Sequential Matching Encoded/Printed (Laser Engraved)5
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)5
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)5
iCLASS Card Numbering3 (Select one option)
N - No Printed Card Numbering
A - Sequential Matching Encoded/Printed (Laser Engraved)5
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)5
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)5
Slot Punch4
N - No Slot Punch
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 52263PSGGAAN
Final Part Number
December 2017
522
6
N
-
(Options #)
Page 43 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Seos Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
iCLASS Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner
3 The Printed card number is placed in the bottom right-hand corner on the back of the card.
4 Cards are not available with any slot punch option.
5 Inkjetted option is not available for these cards.
6 Available with 7 byte static UID for ISO14443A UID migration and interoperability. This feature reduces privacy and is not recommended.Contact your local sales or pre-sales representative for
details.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
Page 44 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Seos + Prox Card - 510
Migration solution from proximity to high security for support in iCLASS SE platform. All iCLASS Seos 8K cards are OTP enabled.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
510 Composite 40% Polyester / PVC*
iCLASS Seos Memory Size and Allocation (Select one option)
5 - 16K Bytes
6 - 8K Bytes6
Programming (Select one option)
P - Programmed with Security Identity Object (SIO), Prox non programmed
R - Both interfaces programmed: iCLASS Seos with Security Identity Object (SIO),
Prox programmed with HID format
V - Unprogrammed, for use with iCLASS SE Encoder
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
iCLASS Seos Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)
Y = Seos Programming
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch4
N - No Slot Punch
125 kHz Card Numbering3 (Select one option
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 5105PGGNNN
Final Part Number
510
N
-
(Options #)
iCLASS Seos Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
125 kHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner.
3 The Printed card number is placed in the bottom right-hand corner on the back of the card.
4 Cards are not available with any slot punch option.
5 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
6 Available with 7 byte static UID for ISO14443A UID migration and interoperability. This feature reduces privacy and is not recommended.Contact your local sales or pre-sales representative for
details.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
December 2017
Page 45 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Seos + iCLASS + Prox Card - 520
Migration solution from proximity and/or iCLASS to high security for support in iCLASS SE platform. All iCLASS Seos 8K cards are OTP
enabled. Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
520 Composite 40% Polyester / PVC*
iCLASS Seos Memory Size and Allocation
6 - iCLASS Seos 8K Bytes6
iCLASS Memory Size and Allocation
0 - iCLASS 2k Bits (256 Bytes) with 2 Application Areas
3 – CLASS 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 – CLASS 32k Bits (4K Bytes) Application areas 16k/16+16k/1
iCLASS Seos Programming (Select one option)
P - Programmed with Security Identity Object (SIO)
V - Unprogrammed, for use with iCLASS SE Encoder (Must be combined with C option below)
iCLASS Programming (Select one option)
S - Programmed with Security Identity Object (SIO) and with standard iCLASS Access
Control Application (recommended)
P -Programmed with Security Identity Object (SIO)
H - Programmed with standard iCLASS Access Control Application
C - Unprogrammed, for use with iCLASS SE Encoder (Must be combined with V option above)
Prox Programming (Select one option)
P - Prox programmed
N - Prox non programmed
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom
Artwork Number1
Y = Seos Programming
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
iCLASS Seos Card Numbering3 (Select one option)
N - No Printed Card Numbering
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
iCLASS Card Numbering3 (Select one option)
N - No Printed Card Numbering
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Prox Card Numbering3 (Select one option)
N - No Printed Card Numbering
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Slot Punch5
N - No Slot Punch
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 52063PSPGGAAAN
Final Part Number
Page 46 of 105
520
6
N
-
(Options #)
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Seos Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
iCLASS Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
125 kHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot punch
target printed on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner on the back of the card.
4 Inkjetted option is not available for these cards.
5 Cards are not available with any slot punch option.
6 Available with 7 byte static UID for ISO14443A UID migration and interoperability. This feature reduces privacy and is not recommended.Contact your local sales or pre-sales representative for
details.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
December 2017
Page 47 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Credentials
iCLASS SE Card - 300 / 305
Added security into installations that do not contain standard iCLASS readers, these cards are not available with iCLASS programming.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
300 Standard PVC
305 Composite 40% Polyester / PVC*
iCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Secure Identity Object Programming
P - Programmed with Security Identity Object (SIO)
V - Unprogrammed, for use with iCLASS SE Encoder
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork
Number1
Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)7
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)7
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)7
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Slot Punch5 (Select one option)
N - No Slot Punch. This card can be slotted vertically, Printed Vertical Slot Indicators6
B - No Slot Punch. This card can be slotted horizontally, Printed Horizontal Slot Indicators6
V - Vertical Slot Punch
H - Horizontal Slot Punch 6
Option - Custom Artwork1
Y = iCLASS Programming
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 3000PGGNN
Final Part Number
-
(Options #)
iCLASS Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot punch
target printed on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner on the back of the card.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
6 The ability to add a horizontal slot punch requires a different iCLASS antenna design. Users can expect a read range reduction of approximately 20% if they order options B or H for the Slot Punch.
7 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
Page 48 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE + Prox Card - 315
Maximized compatibility with added security into installations that contain standard Prox credentials. These cards are not available with
iCLASS programming, a composite fee applies to this card.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
315 Composite 40% Polyester / PVC*
iCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Secure Identity Object Programming (Select one option)
P - Programmed with Security Identity Object (SIO), Prox non programmed
R - Both interfaces programmed: iCLASS with Security Identity Object (SIO),
Prox programmed with HID format
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe Specify Custom Artwork Number1
13.56 MHz iCLASS Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)7
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)7
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)7
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed
(Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Y = iCLASS Programming
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch5 (Select one option)
N - No Slot Punch. This card can be slotted vertically, Printed Vertical Slot Indicators
V - Vertical Slot Punch
125 kHz Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)6
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)6
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)6
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 3150PGGNNN
Final Part Number
-
(Options #)
iCLASS Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
December 2017
Page 49 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
125 kHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot punch
target printed on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner on the back of the card.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
6 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
1
2
Page 50 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Key - 325
The iCLASS SE contactless smart Key offers read/write capability while leveraging Security Identity Object for increased security. Attach to a
key ring or badge clip for convenient use. The iCLASS SE key is not available with iCLASS programming.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
325 Base Model
iCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Secure Identity Object Programming (Select one option)
.24 in
[6 mm]
P - Programmed with Security identity Object (SIO)
V - Unprogrammed, for use with iCLASS SE Encoder
Front Packaging
1. 55 in [39.4 mm]
N - iCLASS Key II - Black with blue insert. Includes HID Standard Artwork
Back Packaging
N - None
Key Numbering
M - Sequential Matching Encoded/Printed (Inkjetted)4
N - No Printed Key Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4
A - Sequential Matching Encoded/Printed (Engraved)2
B - Sequential Encoded/Sequential Non-Matching Printed (Engraved)2
C - Random Encoded/Non-Matching Sequential Printed (Engraved)2
1. 25 in [31.75 mm]
Shown - Front Packaging Option N
Additional Options3
N - None
Enter your final card options from the above selections. Example: 3250PNNMN
Final Part Number
325
N
N
N
iCLASS Key Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
The Printed key number is placed on the back of the key.
For Laser Engraved Printed numbers, consult factory for lead times and cost.
3 Key Ring sold separately (Part Number: 57-0001-02).
4 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
1
2
December 2017
Page 51 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Tag - 330
The iCLASS SE contactless smart Tag offers read/write capability while leveraging Security Identity Object for increased security. iCLASS SE
enable existing credentials or non-metallic devices such as cell phones or PDAs by adhering the iCLASS Tag. The iCLASS SE Tag is not
available with iCLASS programming.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
330 Base Model
iCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Secure Identity Object Programming (Select one option)
P - Programmed with Secure Identity Object (SIO).
V - Unprogrammed, for use with iCLASS SE Encoder
Front Packaging (Select one option)
K - Black with HID Standard Artwork
C - Custom Artwork - Specify Custom Artwork Number2
Back Packaging
S - Adhesive Backing
Tag Numbering1(Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)4
N - No Printed Tag Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4
Front Packaging
Slot Punch
N - None
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final Tag options from check boxes above. Example: 3302PSSNN
Final Part Number
330
S
N
-
(Options #)
iCLASS Tag Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
The Printed tag number is placed on the back of the tag.
For new artwork files, contact Customer Service for custom artwork number, lead-times,
minimum order quantities, and cost.
3 The iCLASS Tag is not for use on cards that use full insertion or tractor feed type readers.
4 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is
not available for these cards.
1
2
Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due
to variations in cards and reading devices, HID does not claim that the iCLASS Tag will work in every situation. Functional and non-functional
iCLASS Tags are available for compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to
ordering.
Page 52 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Clamshell Card - 335
Added security into installations that do not contain standard iCLASS readers, these cards are not available with iCLASS programming.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
335 Base Model
imageiCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas
Secure Identity Object Programming (Select one option)
P - Programmed with Security Identity Object (SIO)
V - Unprogrammed, for use with iCLASS SE Encoder
Front Packaging (Select one option)
M - Plain White Vinyl with Matte Finish
G - Plain White with Gloss Finish
C - Custom Artwork - Specify Custom Artwork Number1
Back Packaging (Select one option)
S - Base with Molded HID Logo
C - Custom Artwork - Specify Custom Artwork Number1
Card Numbering2 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)4
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)3
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)3
Y = iCLASS Programming
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch
V - Vertical Slot Punch
Option - Custom Artwork2
(Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 3350PMSMV
Final Part Number
335
V
-
(Options #)
iCLASS Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
The Printed card number is placed in the top left-hand corner on the back of the card. HID logo molded into base on back.
3 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
1
2
December 2017
Page 53 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE + Other HF Card - 391
The SIO-Enabled iCLASS with MIFARE Classic or MIFARE DESFire EV1 contactless smart card offers multiple High Frequency technologies
to simplify card issuance for diverse systems or migration projects. This card offers maximized compatibility installations that contain iCLASS
SE or MIFARE Classic / MIFARE DESFire EV1 credentials.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
391 Composite 40% Polyester / PVC *
iCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE Classic 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Front Packaging
Card Programming (Select one option)
R - SIO Programmed iCLASS & 2nd Technology. Specify Programming Information
P - SIO Programmed iCLASS only, not 2nd Technology. Specify Programming Information.
A - Configured, Non-Programmed iCLASS, SIO Programmed 2nd Technology.
Specify Programming Information.
V - iCLASS SE Unprogrammed, for use with iCLASS SE Encoder
2nd High Frequency Technology (Select one option)
M - MIFARE Classic 1K Bytes (only available with iCLASS 2k bits)
N - MIFARE Classic 4K Bytes
K - MIFARE DESFire EV1 8K Bytes
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
iCLASS SE Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)6
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)6
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)6
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch
IMPORTANT - Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a badge
holder to attach this card to a lanyard or badge clip.
N - No Slot Punch
2nd High Frequency Technology Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 3914RNGCMNM
Final Part Number
Page 54 of 105
N
-
(Options #)
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
2nd 13.56 MHz technology Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot punch target
printed on the back of the card.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost.
5 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
December 2017
Page 55 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE + Other 13.56MHz + Prox Card - 396
The SIO-enabled card with MIFARE Classic or MIFARE DESFire EV1 contactless smart card as well as HID Proximity offers multiple High
Frequency technologies to simplify card issuance for diverse systems or migration projects. This card offers maximized compatibility into
installations that contain iCLASS SE or MIFARE Classic / MIFARE DESFire EV1 credentials.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
396 Composite 40% Polyester / PVC *
iCLASS SE Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE Classic 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
13.56 MHz Technology Card Programming (Select one option)
R - SIO Programmed iCLASS & 2nd Technology. Specify Programming Information
P - Programmed iCLASS with SIO only not 2nd Technology. Specify Programming Information.
A - Configured, Non-Programmed iCLASS, SIO Programmed 2nd Technology. Specify Programming
Information.
Front Packaging
2nd High Frequency (13.56 MHz) Technology (Select one option)
M - MIFARE Classic 1K Bytes (only available with iCLASS 2k bits)
N - MIFARE Classic 4K Bytes
K - MIFARE DESFire EV1 8K Bytes
125 kHz Technology Card Programming (Select one option)
P - “HID Prox” Programmed 125 kHz Technology. Specify Programming Information
C - “Indala/Casi Prox” Programmed 125 kHz Technology. Specify Programming Information
N - Initialized 125 kHz Technology. Programming Information Not Required
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
iCLASS SE Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch
IMPORTANT - Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a badge
holder to attach this card to a lanyard or badge clip.
N - No Slot Punch
2nd 13.56 MHz Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
125 kHz Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Page 56 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 3964PNPGGNNM
Final Part Number
N
-
(Options #)
iCLASS SE Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
2nd 13.56 MHz Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
125 kHz Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot punch target
printed on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost.
5 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
December 2017
Page 57 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Credentials
iCLASS Card - 200 / 210
iCLASS cards can be ordered either with both SIO and iCLASS programming or iCLASS programming only.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model:
200 Standard PVC
210 Composite 40% Polyester / PVC*
iCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
iCLASS Programming (Select one option)
HP - Programmed with Security Identity Object (SIO) and standard iCLASS Access Control
Application (Recommended)1
P - Programmed with standard iCLASS Access Control Application
C - Unprogrammed, for use with iCLASS SE Encoder
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number2
Back Packaging (Select one option)
G - Plain White with Gloss Finish3
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number2
1 - Plain White with Gloss Finish with Magnetic Stripe3
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number2
Card Numbering4 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)8
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)8
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)8
A - Sequential Matching Encoded/Printed (Laser Engraved)5
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)5
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)5
Slot Punch6 (Select one option)
N - No slot punch, This card can be slotted vertically, Printed Vertical Slot Indicators
B - No Slot Punch, This card can be slotted horizontally, Printer VHorizontal Slot Indicators7
V - Vertical Slot Punch
H - Horizontal Slot Punch7
Option - Custom Artwork2
Y = iCLASS Programming
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 2000HPGGNN
Final Part Number
-
(Options #)
iCLASS Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
PIN (2-12 digits):
Sequential: Start #
Random: Length
.
Special Instructions:
Secure Identity Object (SIO) Programming is not mandatory but highly recommended. If SIO programming is not selected the letter H should be left out from Final Part Number, for
example: 2000PGGNN
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
3 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a
slot punch target printed on the back of the card.
4 The Printed card number is placed in the bottom right-hand corner on the back of the card.
5 For Laser Engraved Printed numbers, consult factory for lead times and cost.
6 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
7 The ability to add a horizontal slot punch requires a different iCLASS antenna design. Users can expect a read range reduction of approximately 20% if they order option H for the Slot
Punch.
8 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
Page 58 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS + Prox card - 212
iCLASS + Prox cards can be ordered either with both SIO and iCLASS programming or iCLASS programming only, a composite fee applies to
this card.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
212 Composite 40% Polyester / PVC*
iCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Programming (Select one option)
Front
Packaging
HP - Programmed with Security Identity Object (SIO), and standard iCLASS Access control application,
125KHz Unprogrammed.1
HB - Programmed with Security Identity Object (SIO), and standard iCLASS Access control application,
programmed, Specify Programming Information1
P - Programmed with standard iCLASS Access Control Application, 125 KHz Unprogrammed.
B - Programmed 125 kHz Proximity and iCLASS. Specify Programming Information.
C - iCLASS Unprogrammed, for use with iCLASS SE Encoder, Prox technology blank.
A - iCLASS Unprogrammed, for use with iCLASS SE Encoder, Prox technology programmed.
Specify Programming Information.
K - iCLASS Programmed, HITAG1 blank. Specify Programming Information.
M - iCLASS Programmed, HITAG2 blank. Specify Programming Information.
R - iCLASS configured field programmable, HITAG1 blank.
I - iCLASS configured field programmable, HITAG2 blank.
125KHz
Front Packaging (Select one option)
Back Packaging
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number2
Back Packaging (Select one option)
G - Plain White with Gloss Finish3
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number2
1 - Plain White with Gloss Finish with Magnetic Stripe3
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number2
iCLASS Card Numbering4 (Select one option)
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
M - Sequential Matching Encoded/Printed (Inkjetted)7
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)7
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)7
A - Sequential Matching Encoded/Printed (Laser Engraved)5
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)5
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)5
Slot Punch6 (Select one option)
V - Vertical Slot Punch
N - No slot punch, This card can be slotted vertically, Printed Vertical Slot Indicators
125 kHz Card Numbering4 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)7
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)7
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)7
A - Sequential Matching Encoded/Printed (Laser Engraved)5
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)5
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)5
Option - Custom Artwork2
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2120HPGGNNN
Final Part Number
December 2017
-
(Options #)
Page 59 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
PIN (2-12 digits):
Sequential: Start #
Random: Length
.
Special Instructions:
125 kHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
Secure Identity Object (SIO) Programming is not mandatory but highly recommended. If SIO programming is not selected the letter H should be left out from Final Part Number, for example:
2020PGGNNN
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
3 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot punch target
printed on the back of the card.
4 The Printed card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
5 For Laser Engraved Printed numbers, consult factory for lead times and cost.
6 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
7 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
Page 60 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Key - 205
The iCLASS Key can be ordered either with both SIO and iCLASS programming or iCLASS programming only. Attach to a key ring or badge
clip for convenient use.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
205 Base Model
iCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Programming (Select one option)
H - Programmed with Security Identity Object (SIO) and iCLASS encoding (Recommended).
Specify programming information.
P - Programmed iCLASS only. Specify programming information
C - iCLASS Unprogrammed, for use with iCLASS SE Encoder.
Programming Information Not Required
1. 55 in [39.4 mm]
.24 in
[6 mm]
Front Packaging
N - iCLASS Key II - Black with blue insert. Includes HID Standard Artwork
Back Packaging
N - None
Key Numbering1 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)4
N - No Printed Key Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4
A - Sequential Matching Encoded/Printed (Engraved)2
B - Sequential Encoded/Sequential Non-Matching Printed (Engraved)2
C - Random Encoded/Non-Matching Sequential Printed (Engraved)2
1. 25 in [31.75 mm]
Additional Options3
N - None
Enter your final card options from the above selections. Example: 2050HNNMN
Final Part Number
205
N
N
N
iCLASS Key Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
PIN (2-12 digits) :
Sequential: Start #
Random: Length
.
Special Instructions:
1 The
Printed key number is placed on the back of the key.
For Laser Engraved Printed numbers, consult factory for lead times and cost.
Key Ring sold separately (Part Number: 57-0001-02) .
4 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
2
3
December 2017
Page 61 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Tag - 206
The iCLASS contactless smart Tag can be ordered either with both SIO and iCLASS programming or iCLASS programming only. iCLASS
enable existing credentials or non-metallic devices such as cell phones or PDAs by adhering the iCLASS Tag.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
206 Base Model
iCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
iCLASS Programming information (Select one option)
H - Programmed with Security Identity Object (SIO) and iCLASS encoding. Specify programming information. (Recommended)
P - Programmed with iCLASS access control application only. Specify programming information.
C - iCLASS Unprogrammed, for use with iCLASS SE Encoder. Programming Information Not Required.
Front Packaging (Select one option)
K - Black with HID Standard Artwork
C - Custom Artwork - Specify Custom Artwork Number2
Back Packaging
S - Adhesive Backing
Tag Numbering1(Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)4
N - No Printed Tag Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)4
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)4
Front Packaging
Slot Punch
N - None
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final Tag options from check boxes above. Example: 2060HSSNN
Final Part Number
206
S
N
-
(Options #)
iCLASS Tag Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
PIN (2-12 digits) :
Sequential: Start #
Random: Length
.
Special Instructions:
The Printed tag number is placed on the back of the tag.
For new artwork files, contact Customer Service for custom artwork number, lead-times, minimum order quantities, and cost.
The iCLASS Tag is not for use on cards that use full insertion or tractor feed type readers.
4 Please note that cards shipped out of Austin, Texas are always laser-engraved. Inkjetted option is not available for these cards.
1
2
3
Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and
reading devices, HID does not claim that the iCLASS Tag will work in every situation. Functional and non-functional
iCLASS Tags are available for compatibility testing with existing credential and reader technologies. Compatibility
should be confirmed prior to ordering.
Page 62 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Clamshell Card - 208
Can be ordered either with both SIO and iCLASS programming or iCLASS programming only.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
208 Base Model
iCLASS Memory Size and Allocation
0 - 2k Bits (256 Bytes) with 2 Application Areas
iCLASS Programming (Select one option)
HP - Programmed with Security Identity Object (SIO) and standard iCLASS Access
Control Application. Programming information required. (Recommended)1
P - Programmed with standard iCLASS Access Control Application only.
Programming information required.
C - iCLASS Unprogrammed, for use with iCLASS SE Encoder. Programming
Information Not Required.
Front Packaging (Select one option)
M - Plain White Vinyl with Matte Finish
G - Plain White with Gloss Finish
C - Custom Artwork - Specify Custom Artwork Number2
Back Packaging (Select one option)
S - Base with Molded HID Logo
C - Custom Artwork - Specify Custom Artwork Number2
Card Numbering4 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)3
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)3
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)3
Y = iCLASS Programming
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch
V - Vertical Slot Punch
Option - Custom Artwork2
(Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 2080HPGSNV
Final Part Number
208
V
-
(Options #)
iCLASS Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
PIN (2-12 digits) :
Sequential: Start #
Random: Length
.
Special Instructions:
Secure Identity Object (SIO) Programming is not mandatory but highly recommended. If SIO programming is not selected the letter H should be left out from Final Part Number, for example:
2080PGSNV
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
3 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
1
2
December 2017
Page 63 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS + Other HF Card - 242
iCLASS with MIFARE Classic or MIFARE DESFire EV1 contactless smart card offers multiple High Frequency technologies to simplify card
issuance for diverse systems or migration projects. For MIFARE Classic: This credential is only delivered with MIFARE Classic UID 4 Bytes
long only (32 Bit). It is not available with 7 bytes UID for MIFARE Classic, only for MIFARE DESFire EV1.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
242 Composite 40% Polyester / PVC *
iCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE Classic 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Front Packaging
Card Programming (Select one option)
J - Programmed with SIO Identity Object (SIO) iCLASS and 2nd technology (Recommended)
H - Programmed with Security Identity Object (SIO) for iCLASS only
I - Programmed with SIO Identity Object (SIO) for 2nd technology only
B - Programmed iCLASS & 2nd Technology. Specify Programming Information.
P - Programmed iCLASS only not 2nd Technology. Specify Programming Information.
C - Unprogrammed iCLASS, for use with iCLASS SE Encoder, Non-programmed 2nd Technology.
Programming Information Not Required.
A - Unprogrammed iCLASS, for use with iCLASS SE Encoder, Programmed 2nd Technology.
Specify Programming Information
2nd High Frequency Technology (Select one option)
M - MIFARE Classic 1K Bytes (only available with iCLASS 2k bits)
N - MIFARE Classic 4K Bytes
K - MIFARE DESFire EV1 8K Bytes
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
iCLASS Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)6
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)6
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)6
A - Sequential Matching Encoded/Printed (Laser Engraved)6
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch
IMPORTANT - Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a badge
holder to attach this card to a lanyard or badge clip.
N - No Slot Punch
2nd High Frequency Technology Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)6
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)6
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)6
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2420HNGGNNN
Final Part Number
Page 64 of 105
N
-
(Options #)
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
PIN (2-12 digits) :
Sequential: Start #
Random: Length
.
Special Instructions:
2nd 13.56MHz Technology Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot punch target
printed on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
6 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
December 2017
Page 65 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS + Other 13.56 MHz + Prox Card - 262
The iCLASS with MIFARE Classic or MIFARE DESFire EV1 contactless smart card as well as HID Proximity offers multiple High Frequency
technologies to simplify card issuance for diverse systems or migration projects. For MIFARE Classic: This credential is only delivered with
MIFARE Classic UID on 4 Bytes long only (32 Bit). It is not available with 7 bytes UID for MIFARE Classic, only for MIFARE DESFire EV1.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
262 Composite 40% Polyester / PVC *
iCLASS Memory Size and Allocation (Select one option)
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE Classic 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
iCLASS / 2nd 13.56MHz Programming
J - Programmed with SIO Identity Object (SIO) for iCLASS and 2nd technology programmed with SIO (Recommended).
H - Programmed with Security Identity Object (SIO) for CLASS only.
I - Programmed with SIO Identity Object only (SIO) for 2nd technology only.
K - Programmed with SIO Identity Object (SIO) for iCLASS and 2nd technology programmed (non SIO).
B - Programmed iCLASS & 2nd Technology. Specify Programming Information.
P - Programmed iCLASS only not 2nd Technology. Specify Programming Information.
C - Unprogrammed iCLASS, for use with iCLASS SE Encoder. Non-programmed 2nd Technology. Programming Information Not Required.
A - Unprogrammed iCLASS, for use with iCLASS SE Encoder, Programmed 2nd Technology. Specify Programming Information.
Other 13.56 MHz Technology (Select one option)
M - MIFARE Classic 1K Bytes (only available with iCLASS 2k bits)
N - MIFARE Classic 4K Bytes
K - MIFARE DESFire EV1 8K Bytes
125 kHz Technology Card Programming (Select one option)
P - “HID Prox” Programmed 125 kHz Technology. Specify Programming Information.
C - “Indala/Casi Prox” Programmed 125 kHz Technology. Specify Programming Information.
N - Initialized 125 kHz Technology. Programming Information Not Required.
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe –
Specify Custom Artwork Number1
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser
Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser
Engraved)4
iCLASS Card Numbering3 (Select one option)
Slot Punch
IMPORTANT - Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a
badge holder to attach this card to a lanyard or badge clip.
N - No Slot Punch
2nd 13.56 MHz Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser
Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser
Engraved)4
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser
Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser
Engraved)4
125 kHz Card Numbering3 (Select one option)
Page 66 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2624JNGGNNN
Final Part Number
N
-
(Options #)
iCLASS Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
PIN (2-12 digits) :
Sequential: Start #
Random: Length
.
Special Instructions:
2nd 13.56 MHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
125 kHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
1 For
new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand on the back of the card.
Printed card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost.
5 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
2
3 The
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
December 2017
Page 67 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
UHF Credentials
UHF Card - 600
The SIO Enabled UHF (Ultra High Frequency: 860-960 MHz) contactless smart card is designed for long read range (parking, gate,
healthcare…) while leveraging your investment in existing access control systems. Personalize the card with a photo ID, magnetic stripe,
barcode, or anti-counterfeiting element. Direct to Card printing on these cards is not recommended.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
600 Composite 40% Polyester / PVC *
Secure Identity Object Programming
T - UHF Programmed with Secure Identity Object.
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
UHF Card Numbering3 (Select one option)
N - No Printed Card Numbering
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Slot Punch
N - No Slot Punch
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 600TGGNN
Final Part Number
600
T
N
-
(Options #)
UHF Programming Information
Format Number
(example: H10301) Bit Numbers5
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
1 For
new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
3 The Printed card number is placed in the bottom right-hand corner for UHF
4 For Laser Engraved Printed numbers, consult factory for lead times and cost.
5 Number of bits should remain below 120 bits
2
and reference number printed in the lower left-hand on the back of the card.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
Page 68 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
UHF + iCLASS Card - 601
The SIO enabled UHF/iCLASS smart card provides a secure long range parking and gate control solution that can be used in conjunction with
existing access control technologies. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element. Direct to
Card printing on these cards is not recommended.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
601 Composite 40% Polyester / PVC *
iCLASS Memory Size and Allocation
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
S - UHF Programmed with Secure Identity Object. iCLASS programmed with standard iCLASS
Access Control Application and SIO payloads.
T - UHF Programmed with Secure Identity Object. iCLASS programmed with Secure Identity Object.
H - UHF Programmed with Secure Identity Object. iCLASS programmed with standard iCLASS
Access Control Application payload.
C - UHF Programmed with Secure Identity Object. iCLASS field encoded, for use with iCLASS SE Encoder.
2.125"
(5.4 cm)
Card Programming
Front Packaging (Select one option)
3.370"
(8.57) cm
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
0.033"
(0.084 cm)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
UHF Card Numbering3 (Select one option)
N - No Printed Card Numbering
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
OPTIONAL MAGNETIC STRIPE
½" ‘(HICO/HIGH ENERGY -4000OE)
iCLASS Card Numbering3 (Select one option)
©
N - No Printed Card Numbering
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
iCLASS UHF
4*12345
ICLASS
12345 YYYYYYYY-YY SR
UHF
YYYYYYYY – YY = Sales Order Number
Slot Punch
N - No Slot Punch
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 6013TGGNNN
Final Part Number
601
N
(Options #)
UHF Programming Information
Format Number
(example: H10301) Bit Numbers5
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
December 2017
Page 69 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
PIN (2-12 digits) :
Sequential: Start #
Random: Length
.
Special Instructions:
1 For
new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner for UHF
4 For Laser Engraved Printed numbers, consult factory for lead times and cost.
5 Number of bits should remain below 120 bits
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
2
Page 70 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
UHF + MIFARE Classic Card - 603
The SIO enabled UHF/MIFARE Classic smart card provides a secure long range parking and gate control solution that can be used in
conjunction with existing access control technologies. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting
element. Direct to Card printing on these cards is not recommended.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
603 Composite 40% Polyester / PVC *
Card Programming
J - UHF Programmed with Secure Identity Object. MIFARE programmed
with Secure Identity Object.
P - UHF Programmed with Secure Identity Object. MIFARE non-programmed.
H - UHF Programmed with Secure Identity Object. MIFARE programmed
with HID MIFARE Access Control Application payload.
K - UHF Programmed with Secure Identity Object. MIFARE custom
programmed (custom part suffix required)
MIFARE Memory Size and Allocation
M – 4K Bytes
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify
Custom Artwork Number1
UHF Card Numbering3 (Select one option)
N - No Printed Card Numbering
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser
Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser
Engraved)4
MIFARE Card Numbering3 (Select one option)
N - No Printed Card Numbering
A - Sequential Matching Encoded/Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser
Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser
Engraved)4
Slot Punch
N - No Slot Punch
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 603JMGGANA
Final Part Number
603
N
(Options #)
December 2017
©2016 - 2017 HID Global Corporation/ASSA ABLOY AB.
All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior written
permission of HID Global Corporation.
Page 71 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
UHF Programming Information
Format Number
(example: H10301) Bit Numbers5
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
MIFARE Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
1 For
new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner for UHF
4 Inkjetted option not available for these cards
5 Number of bits should remain below 120 bits
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
2
Page 72 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
HID Proximity Credentials
ProxCard II Card - 1326
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
1326 Base Model
Programming (Select one option)
L - Programmed, Low Frequency (125 kHz) HID. Specify Programming Information.
N - Non-Programmed, Low Frequency (125 kHz). Programming Information
Not Required.
Front Packaging (Select one option)
S - ProxCard II Artwork - Vinyl with Matte Finish
M - Plain White Vinyl with Matte Finish
G - Plain White PVC with Gloss Finish
C - Custom Artwork - Specify Custom Artwork Number1
Back Packaging (Select one option)
S - Base with Molded HID Logo
C - Custom Artwork - Specify Custom Artwork Number1
(Cover)
Front
Packaging
Card Numbering2 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)
(Base)
Back
Packaging
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch
V - Vertical Slot Punch
Option - Custom Artwork2
(Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1326LSSMV
Final Part Number
1326
V
-
(Options #)
125 kHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
2 The Printed card number is placed in the top left-hand corner on the back of the card. HID logo molded into base on back.
1
December 2017
Page 73 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
DuoProx® II Card - 1336 / 1536
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
1336 Standard PVC
1536 Composite 40% Polyester / PVC *
125 KHz Programming (Select one option)
L - Programmed. Specify Programming Information.
N - Unprogrammed, for use with iCLASS SE Encoder. Programming Information Not Required.
Front Packaging (Select one option)
G - Plain White PVC w/ Gloss Finish
C - Custom Artwork w/ Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White PVC w/ Gloss Finish2
S - Standard DuoProx II Artwork Gloss Finish2
C - Custom Artwork w/ Gloss Finish - Specify Custom Artwork Number1, 2
Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)
A - Sequential Matching Encoded/Printed (Engraved)5
B - Sequential Encoded/Sequential Non-Matching Printed (Engraved)5
C - Random Encoded/Non-Matching Sequential Printed (Engraved)5
Back
Packaging
Slot Punch4 (Select one option)
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
N - No slot punch, Printed Vertical and Horizontal Slot Indicators
V - Vertical Slot Punch, Printed Horizontal Slot Indicators
H - Horizontal Slot Punch, Printed Vertical Slot Indicators
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1336LGGMN
Final Part Number
-
(Options #)
125 kHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small “HID logo” "
" and reference
number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner on the back of the card.
4 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
Consult with the printer manufacturer prior to ordering.
5 For Laser Engraved Printed numbers, consult factory for lead times and cost.
6 Programmed as a sequential 12 digit number.
* The composite construction is recommended for all cards that will have an over-laminate applied.
1
2
Page 74 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
ProxKey III Keyfob - 1346
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
1346 Base Model
Programming (Select one option)
L - Programmed, Low Frequency (125 kHz). Specify Programming Information.
N - Non-Programmed, Low Frequency (125 kHz). Programming Information Not Required.
Front Packaging
Back Packaging
S - Standard
Keyfob Numbering2 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)
A - Sequential Matching Encoded/Printed (Engraved)3
B - Sequential Encoded/Sequential Non-Matching Printed (Engraved)3
C - Random Encoded/Non-Matching Sequential Printed (Engraved)3
Front Packaging
Back Packaging
1. 55 in [39.4 mm]
.24 in
[6 mm]
N - ProxKey III - Black with grey insert. Includes HID Standard Artwork
C - ProxKey III - Custom Artwork - Specify Custom Artwork Number1
1. 25 in [31.75 mm]
Shown - Front Packaging Option “N”
Additional Options4
12345 = Keyfob ID Number
YYYYYYYY-YY = Sales Order Number
N - No Option
Enter your final ProxKey options from check boxes above. Example: 1346LNSMN
Final Part Number
1346
S
N
125 kHz ProxKey Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
The Printed number is placed on the back of the Keyfob.
For Laser Engraved Printed numbers, consult factory for lead times and cost.
4 Key Ring sold separately (Part Number: 57-0001-02)
1
2
3
December 2017
Page 75 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
ISOProx® II Card - 1386 / 1586
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
1386 Standard PVC
1586 Composite 40% Polyester / PVC *
125 KHz Programming (Select one option)
L - Programmed. Specify Programming Information.
N - Unprogrammed, for use with iCLASS SE Encoder. Programming Information Not Required.
Front Packaging (Select one option)
Front Packaging
G - Plain White PVC w/ Gloss Finish
C - Custom Artwork w/ Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White PVC w/ Gloss Finish2
C - Custom Artwork w/ Gloss Finish - Specify Custom Artwork Number1, 2
Card Numbering (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Engraved)6
B - Sequential Encoded/Sequential Non-Matching Printed (Engraved)6
C - Random Encoded/Non-Matching Sequential Printed (Engraved)6
Back
Packaging
Slot Punch4 (Select one option)
N - No slot punch, Printed Vertical and Horizontal Slot Indicators
V - Vertical Slot Punch, Printed Horizontal Slot Indicators
H - Horizontal Slot Punch, Printed Vertical Slot Indicators
Option - Custom Artwork1
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
(Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1386LGGMN
Final Part Number
-
(Options #)
125 kHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small “HID logo” "
" and reference
number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner on the back of the card.
4 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
Consult with the printer manufacturer prior to ordering.
5 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
6 For Laser Engraved Printed numbers, consult factory for lead times and cost.
* The composite construction is recommended for all cards that will have an over-laminate applied.
1
2
Page 76 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
ProxPass® II Active Vehicle Identification Tag - 1351
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
1351 Base Model
Programming1
L - Programmed, Low Frequency (125 kHz). Specify Programming Information.
Color
B - Standard beige finish
Back Packaging
S - Standard HID logo
Tag Numbering (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)
Hardware Option
N - None
Enter your final Tag options from check boxes above. Example: 1351LBSMN
Final Part Number
1351
L
B
S
N
Front Packaging
-
(Optional Artwork #)
Back Packaging
12345 = Tag ID Number
YYYYYYYY-YY = Sales Order Number
125 kHz Tag Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit [maximum of 37-bits]) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
1
The ProxPass II does not support formats longer than 37-bits (including 48-bit Corpororate 1000)
The ProxPass II Tag includes two replaceable Encoded batteries and Velcro strips for a complete and simple installation.
Battery Part # BR2330 is available at most electronic stores (not sold by HID).
December 2017
Page 77 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
MicroProx® Tag Proximity - 1391
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
1391 Base Model
Programming (Select one option)
L - Programmed, Low Frequency (125 kHz). Specify Programming Information.
N - Non-Programmed, Low Frequency (125 kHz). Programming Information Not Required.
Front Packaging (Select one option)
S - Gray with HID Standard Artwork
G - Plain Gray Finish, (No Artwork)
C - Custom Artwork - Specify Custom Artwork Number1
Back Packaging3
S - Adhesive Backing
Tag Numbering2 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)
N - No Printed Tag Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)
Slot Punch
N - None
Optional Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork)
Enter your final Tag options from check boxes above. Example: 1391LKSMN
Final Part Number
1391
S
N
-
(Optional Artwork #)
125 kHz Tag Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, minimum order quantities, and cost.
The Printed tag number is placed on the back of the tag.
The MicroProx Tag is not for use on cards that use full insertion or tractor feed type readers.
Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices, HID does not claim that the MicroProx Tag will work in every
situation. Functional and non-functional MicroProx Tags are available for compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering.
1
2
3
MicroProx Placement
Page 78 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
Direct Image PVC Glossy Label Part Numbers
Part #
Description
Thickness
Dimensions
1324GAV11
ProxCard II size with slot punch, white adhesive back
10 mil PVC
3.310” x 2.060"
1324GAN11
ProxCard II size, no slot punch, white adhesive back
10 mil PVC
3.310” x 2.060"
1324GAV21
ProxCard II size with slot punch, white adhesive back
20 mil PVC
3.310” x 2.060"
1324GAN21
ProxCard II size, no slot punch, white adhesive back
20 mil PVC
3.310” x 2.060"
1324GBV22
ISOProx II and ProxCard II size with slot punch, brown (3M) adhesive back
20 mil PVC
3.370” x 2.125”
1324GBN22
ISOProx II and ProxCard II size, no slot punch, brown (3M) adhesive back
20 mil PVC
3.370” x 2.125”
1324GAV22
ISOProx II and ProxCard II size, with slot punch, white adhesive back
20 mil PVC
3.370” x 2.125”
1324GAN22
ISOProx II and ProxCard II size, no slot punch, white adhesive back
20 mil PVC
3.370” x 2.125”
Notes:
•
Some dye sublimation printers cannot accommodate pre-slot punched labels; consult with the printer manufacturer prior to ordering.
•
Labels are packaged in multiples of 100 pieces. Minimum order quantity is 100 pieces. Orders will be accepted in multiples of 100
pieces per label Model.
•
Make sure to adjust your dye sublimation printer setting to the proper PVC label thickness and dimension.
December 2017
Page 79 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
Indala 125kHz Credential
Every part number consists of a base model number to indicate the type of product, and a letter or number to indicate each product option.
Each Indala product has a standard part number that includes default options, as indicated on the order guide. When an order is placed for a
product, the base model number and all options must be specified. If you require any options that are different from the default options, you
must also indicate those options at the time the order is placed. All part numbers must be complete to be accepted by HID’s order entry
system.
All card orders must have the following information:
•
BASE MODEL NUMBER - Specifies card or type
•
PROGRAMMING - Specifies if card is factory or field programmed (format or format number, facility code, and ID number range
must be given at time of order)
•
FRONT or FLAT SIDE GRAPHICS - Specifies standard or custom artwork, and smart chip placement
•
BACK or EMBOSSED SIDE GRAPHICS - Specifies standard or custom artwork, and smart chip placement
•
MARKING POSITION - Specifies location of card marking.
Note: Card marking is surface printed and, therefore is not to be considered permanent. In certain cases Laser etching may be used instead
of inkjet marking. Laser etching is permanent marking but is not used on all products.
•
SLOT PUNCH - Specifies slot location if available
•
CARD OPTIONS - Applies to FlexCard® (Base Model FPCRD/CXCRD) only
•
MAGNETIC STRIPE OPTION - Specifies if card is to have a magstripe and which type (ISO Imageable Cards only)
•
CUSTOM FILE NUMBER - Specifies the artwork number to be used
Page 80 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
FPISO - FlexPass Imageable Card
Standard Part No.:
Description:
FPISO-SSSCNA-0000
125 kHz, white glossy finish front, white glossy finish with Indala logo back, marking on standard
location, no slot punch, no magstripe, no artwork
FPISO S S S
C
N
A
0000
BASE MODEL NUMBERS
PROGRAMMING
FRONT GRAPHICS
BACK GRAPHICS
MARKING POSITION
SLOT PUNCH
MAGNETIC STRIPE OPTION
CUSTOM FILE NO
BASE MODEL NUMBERS
FPISO
FlexISO® Proximity Card
FPWGD
FlexISO Proximity and Wiegand Combination Card
FPIXT
FlexISO XT Composite Proximity Card
PROGRAMMING
S = Standard, Programmed, Low Frequency 125 kHz - exact coding standard, with no gaps or over-runs
(Specify Format Number, Facility Code, and ID Range)
N = Not Programmed, Low Frequency 125 kHz (Blank/Programmable)
FRONT GRAPHICS
S = Standard white glossy finish, suitable for video imaging
C = Custom (Artwork on file or new)
BACK GRAPHICS
S = Standard white glossy finish with Indala logo, card marking (Sales Order & matching internal ID number), suitable
for dye sublimation imaging in most areas
C = Custom (Artwork on file or new)
MARKING POSITION
Note: Standard Marking is Label Code E153, which is Sales Order number & matching 5 digit internal ID number, is
used unless otherwise specified.
C = Position 3/Standard Location (Back Side/Lower Right Corner)
Note: Inkjet marking is surface printed and, therefore is not to be considered permanent.
In some cases Laser etching will replace inkjet marking. Laser etching is permanent in most applications.
SLOT PUNCH
N = None
V = Vertical (portrait orientation) - Unavailable for FPWGD
H = Horizontal (landscape orientation)
MAGNETIC STRIPE OPTION
A = No Magstripe
B = Standard Magstripe (3-track, high coercivity, 4000 oersted)
CUSTOM FILE NUMBER (4 Characters - Factory Assigned)
0000 = No Artwork (Call your Customer Service Representative for new artwork)
December 2017
Optional Magnetic Stripe
14098765 12345
Position C
Page 81 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
FPCRD - FlexCard Standard Card
Standard Part No.:
Description:
FPCRD-SSSMW-0000
125 kHz, printed Indala logo on front, embossed Indala logo on back, card marking on flat side (lower
right corner with slot to the right), white color (not printable), no artwork. Vertical slot punch only.
FPCRD
S
S
S
M
W
0000
BASE NUMBER
PROGRAMMING
FLAT SIDE GRAPHICS
EMBOSSED SIDE GRAPHICS
MARKING POSITION
CARD OPTION
CUSTOM FILE NO
BASE NUMBER
FPCRD - 125 kHz Clamshell type Proximity Card
PROGRAMMING
S = Standard, Programmed, Low Frequency 125 kHz - exact coding standard, with no gaps or over-runs
(Specify Format or Format Number, Facility Code, and ID Range)
N = Not Programmed, Low Frequency 125 kHz (Blank/Programmable)
FLAT SIDE GRAPHICS
S = Standard (Flat Side with printed Indala logo)
C = Custom (Artwork on file or new)
EMBOSSED SIDE GRAPHICS
S = Standard (Embossed Side with embossed Indala logo)
C = Custom (Artwork on file or new, still with embossed Indala logo)
MARKING POSITION
Notes:
•
•
Standard Marking or Label Code E153, which is Sales Order number & matching internal ID number, is used unless
otherwise specified.
Inkjet marking is surface printed and, therefore is not to be considered permanent. In some cases Laser etching will
replace inkjet marking. Laser etching is permanent in most applications.
A = Position 1/Flat Side (with slot punch to the right, lower left corner) - available with Printable Option only
C = Position 3/Flat Side (with slot punch to the right, lower right corner) - available with Printable Option only
K = Position 1/Embossed Side (with slot punch to the right, lower left corner)
M = (Standard) = Position 3/Embossed Side (with slot punch to the right, lower right corner)
CARD OPTION
W = White (standard color) - surface treated with UV protection - may not accept printing
P = Printable, matt finish - No varnish, no logo, surface will accept post printing
Flat side
CUSTOM FILE NUMBER (4 Characters - Factory Assigned)
0000 = No Artwork
Call your Customer Service Representative for
new artwork
A (1)
C (3)
position(s)
Page 82 of 105
Embose side
K
M (3)
(1)
position(s)
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
FPTAG - FlexTag
Standard Part No.: FPTAG-SSSS-XXXX
Description: 125 kHz, printed Indala logo on front side
FPTAG
S
S
S
S
XXXX
BASE NUMBER
PROGRAMMING
FRONT GRAPHICS
BACK GRAPHICS
MARKING POSITION
CUSTOM FILE NO
BASE NUMBER
FPTAG - 125 kHz Keytag Type Proximity Card
PROGRAMMING
S = Standard Programmed, Low Frequency 125 kHz - exact coding standard, with no gaps or over-runs.
(Specify Format or Format Number, Facility Code, and ID Range)
N = Not Programmed
FRONT GRAPHICS
S = Standard (printed Indala logo)
BACK GRAPHICS
S = Standard (no logo, printed strip for marking)
MARKING POSITION
Notes:
•
•
Standard Marking or Label Code E201, which is a shortened version of the Sales Order number & matching internal
ID number, is used unless otherwise specified.
Inkjet marking is surface printed and, therefore is not to be considered permanent. Most Keytag marking will be with
Laser etching which is permanent in most applications.
S = Standard (back side on printed strip)
CUSTOM FILE NUMBER XXXX (4 Characters - Factory Assigned)
0002 = No Artwork
AAAA = Custom Artwork. Contact your Customer Service Representative for new artwork.
December 2017
Page 83 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
FPKEY - FlexKey Keytag
Standard Part No.: FPKEY-SSSS-0000
Description:125 kHz, printed Indala logo on front side, printed strip for marking on back side
FPKEY
S
S
S
S
0000
BASE NUMBER
PROGRAMMING
FRONT GRAPHICS
BACK GRAPHICS
MARKING POSITION
CUSTOM FILE NO
BASE NUMBER
FPKEY - 125 kHz Keytag Type Proximity Card
PROGRAMMING
S = Standard, Programmed, Low Frequency 125 kHz - exact coding standard, with no gaps or over-runs
(Specify Format or Format Number, Facility Code, and ID Range)
N = Not Programmed, Low Frequency 125 kHz (Blank/Programmable)
FRONT GRAPHICS
S = Standard (printed Indala logo)
C = Custom (Artwork on file or new)
BACK GRAPHICS
S = Standard (no logo, printed strip for marking)
C = Custom (Artwork on file or new)
MARKING POSITION
Notes:
•
•
Standard Marking or Label Code E201, which is a shortened version of the Sales Order number & matching internal
ID number, is used unless otherwise specified.
Inkjet marking is surface printed and, therefore is not to be considered permanent. Most Keytag marking will be with
Laser etching which is permanent in most applications.
S = Standard (back side on printed strip)
CUSTOM FILE NUMBER (4 Characters - Factory Assigned)
0000 = No Artwork
Call your Customer Service Representative for new artwork.
Page 84 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
FlexPass Formats
The following formats are non-proprietary and are available to all customers. Call HID to discuss other formats.
Format Name: 26-BIT WIEGAND
Card Format Number
Facility Code Range
40134
0 to 255
ASP 10022
0 to 255
ID Number Range
0 to 65,535 (Systems installed prior to June 2003)
0 to 65,535 (All new Systems except FP Lite)
Reader Format Numbers
10022 (1L = 1x Wire for LED control)
10200 (2L = 2x Wires for LED control)
Format Name: 27-BIT INDALA
Card Format Number
Facility Code Range
4010X
0 to 8,191
ID Number Range
0 to 16,383
Reader Format Numbers
10251 (1L = 1x Wire for LED control)
1026X (2L = 2x Wires for LED control)
Format Name: ABA TRACK 2
Card Format Numbers Facility Code Range
4038X (ASP)
0 to 255
17256 (ASP+)
0 to 99,999
ID Number Range
0 to 99,999
0 to 99,999
Reader Format Numbers
11037 OC (Open Collector)
11738 PUR (Pull Up Resistor)
Format Name: RS232 Serial Data
Card Format Number
Card Programming Range
16144
up to 24 characters in total length, i.e. ABCD12345678901234567890
Reader Format Number
16144
Format Options for FP506B/FP507B Proximity & Keypad Readers (e.g. Format 10022K01)
CFG. Number
Buf/Unbuf
Data Type
K01
UnBuffered
8-bit burst
K02
UnBuffered
8-bit burst
K03
Buffered
Wiegand
facility code xx
K04
Buffered
Wiegand
facility code xx
K05
Buffered
Magstripe
LSB First
4 digit PIN
*/# keys enabled
ARK-501 BUFFERED
K06
Buffered
Magstripe
LSB First
4 digit PIN
*/# keys disabled
ARK-501 BUFFERED
PINKERTON
K07
Buffered
Magstripe
LSB First
5 digit PIN
*/# keys enabled
K08
Buffered
Magstripe
LSB First
5 digit PIN
*/# keys disabled
K09
Buffered
Magstripe
MSB First
4 digit PIN
*/# keys enabled
K10
Buffered
Magstripe
MSB First
4 digit PIN
*/# keys disabled
K11
Buffered
Magstripe
MSB First
5 digit PIN
*/# keys enabled
K12
Buffered
Magstripe
MSB First
5 digit PIN
*/# keys disabled
K13
Unbuffered
4 bit burst
*/# keys enabled
K14
Unbuffered
4 bit burst
*/# keys disabled
December 2017
Options
Pin Size
Special Keys
Emulates
*/# keys enabled
ARK-501
*/# keys disabled
*/# keys enabled
*/# keys disabled
Page 85 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
MIFARE Credentials
MIFARE Classic Card - 340 / 345 / 1430 / 1440 / 1436 / 1446
Encompasses the industry’s broadest range of open standard contactless smart card products. Provides the memory structure and capacity
to store multiple applications on a single credential. All MIFARE Classic cards can be ordered with or without SIO encoding.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
MIFARE Classic cards with SIO encoding
(Recommended)
OR
MIFARE Classic Cards without SIO encoding
3400 (1K) Standard PVC
3406 (4K) Standard PVC
3450 (1K) Composite 40% Polyester/PVC*
3456 (4K) Composite Polyester 40%/PVC*
Programming
P
V
- Programmed with Security Identity Object (SIO) for MIFARE
- Unprogrammed SIO, for use with iCLASS SE Encoder
1430 (1K) Standard PVC
1440 (4K) Standard PVC
1436 (1K) Composite 40% Polyester / PVC *
1446 (4K) Composite Polyester 40% / PVC*
Programming (Select one option)
M
- Programmed, HID MIFARE6 (Specify HID Format, for example
N
- Non-Programmed (13.56MHz)6. Programming information not
S
- Custom programming, specify programming information.
H10301)
required.
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
1 - Plain White with Gloss Finish with Magnetic Stripe2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1, 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1, 2
Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)7
N - No Printed Card Numbering
U - UID (CSN) HEX card numbering only (Inkjetted)7
V - UID (CSN) Decimal card numbering only (Inkjetted)7
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)7
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)7
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Z - Reversed UID (CSN) Decimal card numbering only (Laser Engraved) 4
Slot Punch5 (Select one option)
N - No slot punch, Printed Vertical Slot Indicators
V - Vertical Slot Punch
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork forms for new artwork)
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Enter your final card options from check boxes above. Example: 3400PGGNN
Final Part Number
Page 86 of 105
-
(Options #)
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
13.56 MHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For Contact Smart Chip selection, refer to Logical Access How to Order Guide. Standard configuration does not include a contact
smart chip module.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand
corner and a slot punch target printed on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost. When printed, by default the number is encoded MSB (most significant byte) -> LSB (least significant byte).
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to
ordering.
6 Includes a permanent Unique MIFARE 32 Bit Serial number. When printed the number is encoded MSB (most significant byte) -> LSB (least significant byte).
7 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
* The composite construction is recommended for all cards with over-laminate applied.
1
2
December 2017
Page 87 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
MIFARE Classic + Prox card - 350 / 355 / 1431 / 1441 / 1437 / 1447
Encompasses the industry’s broadest range of open standard contactless smart card products. Provides the memory structure and capacity to
store multiple applications on a single credential with the addition of Proximity technology for easier migration. All MIFARE Classic + Prox
cards can be ordered with or without SIO encoding.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
MIFARE Classic + Prox card
with SIO encoding (Recommended)
OR
MIFARE Classic + Prox card
without SIO encoding
3500 (1K) Standard PVC
3506 (4K) Standard PVC
3550 (1K) Composite 40% Polyester/PVC*
3556 (4K) Composite 40% Polyester/PVC*
1431 (1K) Standard PVC
1441 (4K) Standard PVC
1437 (1K) Composite 40% Polyester / PVC*
1447 (4K) Composite 40% Polyester / PVC*
Programming (Select one option)
P
R
- Programmed with Security Identity Object (SIO) for MIFARE
- Both interfaces programmed (MIFARE with Security Identity
V
- Unprogrammed SIO, for use with iCLASS SE Encoder, Prox un-
Programming (Select one option)
L - Programmed, (125 kHz only with HID Format)6.
Specify Programming Information.
M - Programmed, HID MIFARE 6 (Specify HID format, for example H10301).
B - Programmed, (125kHz and 13.56 MHz with HID Format)6.
Specify Programming Information.
N - Non-Programmed (125 kHz & 13.56 MHz without HID Format)6.
Programming Information Not Required.
S - Custom Programmed, (13.56 MHz only)6, Prox configured
Specify Programming Information
Object (SIO), Prox programmed with HID format)
programmed
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
1 - Plain White with Gloss Finish with Magnetic Stripe2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1, 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1, 2
13.56 MHz MIFARE Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
U - UID (CSN) HEX card numbering only (Inkjetted)5
V - UID (CSN) Decimal card numbering only (Inkjetted)5
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Z - Reversed UID (CSN) Decimal card numbering only (Laser Engraved) 4
Note: 350 credential may vary.
Slot Punch (Select one option)
N - No slot punch. This card can be slotted vertically, Printed Vertical Slot Indicators
V - Vertical Slot Punch
125 kHz Proximity Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)
A - Sequential Matching Encoded/Printed (Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Engraved)4
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork forms for new artwork)
Enter your final card options from check boxes above. Example: 3506PGGMNS
Final Part Number
N
-
(Options #)
13.56 MHz Card Programming Information
Page 88 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
125 KHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For Contact Smart Chip selection, refer to Logical Access How to Order Guide. Standard configuration does not include a contact
smart chip module.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand
corner and a slot punch target printed on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost. When printed, by default the number is encoded MSB (most significant byte) -> LSB (least significant byte).
5 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
6 Includes a permanent Unique MIFARE 32 Bit Serial number.
* The composite construction is recommended for all cards with over-laminate applied.
1
2
December 2017
Page 89 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
MIFARE Classic Keyfob - 1434 / 1444
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
1434 (1K)
1444 (4K)
Programming (Select one option)
M - Programmed, HID MIFARE3 (Specify HID format, for example H10301).
N - Non-Programmed (13.56 MHz). Programming Information Not Required.
S - Custom Programmed, Specify Programming Information.
Front Packaging (Select one option)
S - Standard HID Artwork
C - Custom Artwork - Specify Custom Artwork Number1
Back Packaging
S - Standard
Key Numbering1 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Slot Punch2
N - None
Enter your final Key options from check boxes above. Example: 1434NSSNN
Final Part Number
S
N
13.56 MHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
The Printed key number is placed on the back of the key.
Key Ring sold separately (Part Number: 57-0001-02).
3 Includes a permanent Unique MIFARE 32 Bit Serial number.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost.
1
2
Page 90 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
MIFARE Classic Adhesive Tag - 1435
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
1435 (1K)
Programming (Select one option)
M - Programmed, HID MIFARE 6 (Specify HID format, for example H10301).
N - Non-Programmed (13.56 MHz). Programming Information Not Required.
S - Custom Programmed, Specify Programming Information.
Front Packaging (Select one option)
S - Standard HID Artwork
C - Custom Artwork - Specify Custom Artwork Number1
Back Packaging
S - Standard
Tag Numbering1 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)
Slot Punch2
N - None
Enter your final Tag options from check boxes above. Example: 1435NSSNN
Final Part Number
S
N
13.56 MHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
The Printed tag number is placed on the back of the tag.
For new artwork files, contact Customer Service for custom artwork number, lead-times, minimum order quantities, and cost.
The Tag is not for use on cards that use full insertion or tractor feed type readers.
4 Includes a permanent Unique MIFARE 32 Bit Serial number.
* Up to 1.14in (29mm) read range in free air.
1
2
3
Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices, HID does
not claim that the Tag will work in every situation. Functional and non-functional Tags are available for compatibility testing with existing
credential and reader technologies. Compatibility should be confirmed prior to ordering.
* = Actual read range performance affected by mounting location, environment and the tags tuned resonant frequency.
December 2017
Page 91 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
MIFARE DESFire EV1 Card - 370 / 375 / 1450 / 1456
Based on open global standards for security, and is interoperable with existing MIFARE DESFire EV1 infrastructures. All MIFARE DESFire
EV1 cards can be order either with or without SIO encoding.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
OR
Card with SIO encoding
3700 Standard PVC
3750 Composite 40% Polyester/PVC*
MIFARE DESFire EV1 Memory Size
1450 Standard PVC
1456 Composite 40% Polyester/PVC*
MIFARE DESFire EV1 Memory Size
C - 8K Bytes MIFARE DESFire EV1
C - 8K Bytes MIFARE DESFire EV1
Programming
P
V
Card without SIO encoding
- Programmed with Security Identity Object (SIO)
- Unprogrammed SIO, for use with iCLASS SE Encoder
Programming (Select one option)
N - Non-Programmed (13.56MHz). Programming information not required.
S - Custom programming, specify programming information.
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
1 - Plain White with Gloss Finish with Magnetic Stripe2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1, 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom
Artwork Number1, 2
Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Z - Reversed UID (CSN) Decimal card numbering only (Laser Engraved) 4
Slot Punch6
N - No Slot Punch. IMPORTANT – 3700, 3750, 1450, and 1456 credentials do not allow a slot punch
due to the antenna design, use a badge holder to attach this card to a lanyard or badge clip.
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new
Artwork)
Enter your final card options from check boxes above. Example: 3750CPGGNN
Final Part Number
C
-
(Options #)
13.56 MHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For Contact Smart Chip selection, refer to Logical Access How to Order Guide. Standard configuration does not include a contact smart chip module.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand
corner and a slot punch target printed on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only. Permanent Unique MIFARE 56 Bit serial # cannot be printed on
cards.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost. When printed, by default the number is encoded MSB (most significant byte) -> LSB (least significant byte).
5 Please note that cards shipped within North America are always laser-engraved. Inkjetted option is not available for these cards.
6 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
Consult with the printer manufacturer prior to ordering.
* The composite construction is recommended for all cards with over-laminate applied.
1
2
Page 92 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
MIFARE DESFire EV1 + Prox Card - 380 / 385 / 1451 / 1457
Based on open global standards for security, and is interoperable with existing MIFARE DESFire® infrastructures with the addition of Proximity
technology for easier migration. All MIFARE DESFire EV1 cards can be order either with or without SIO encoding.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Card with SIO encoding + Prox (Recommended)
3800 Standard PVC
3850 Composite 40% Polyester/PVC*
MIFARE DESFire EV1 Memory Size
C - 8K Bytes DESFire EV1
Programming (Select one option)
P - Programmed with Security Identity Object (SIO) for MIFARE DESFire
EV1, Prox non-programmed
R - Both interfaces programmed (MIFARE DESFire EV1 with Security
Identity Object (SIO), Prox programmed with HID format)
V - Unprogrammed SIO, for use with iCLASS SE Encoder, Prox nonprogrammed.
OR
Card without SIO encoding + Prox
1451 Standard PVC
1457 Composite 40% Polyester/PVC*
*HITAG based cards are not available with composite
MIFARE DESFire EV1 Memory Size
C - 8K Bytes DESFire EV1
Programming (Select one option)
L - Programmed (125KHz only). Specify programming information
N - Non-Programmed (125KHz & 13.56MHz). Programming
information not required.
S - Custom programming, (13.56 MHz only), Prox Configured Specify
Programming Information.
R - Custom programming, (125kHz and Custom 13.56 MHz), Specify
Programming Information.
F - Non-Programmed (HITAG1 & 13.56 MHz). Programming
Information Not Required.
G - Custom Programmed, (13.56 MHz only), HITAG1 Configured only.
Specify Programming Information for MIFARE DESFire EV1.
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
1 - Plain White with Gloss Finish with Magnetic Stripe2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1, 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1, 2
13.56 MHz DESFire Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
Slot Punch
IMPORTANT - MIFARE DESFire EV1 + prox credentials do not allow a slot punch
due to the antenna design, use a badge holder to attach this card to a lanyard or
badge clip.
N - No Slot Punch
125 KHz Card Numbering3
M - Sequential Matching Encoded/Printed (Inkjetted)5
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)5
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)5
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
December 2017
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Page 93 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 3850CPGGNNN
Final Part Number
C
N
-
(Options #)
13.56 MHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
125KHz Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For Contact Smart Chip selection, refer to the Logical Access How to Order guide. Standard configuration does not include a contact smart chip module.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small “HID logo” "
" and reference number printed in the lower left-hand
corner and a slot punch target printed on the back of the card.
3 The Printed card number is placed in the bottom left-hand corner (125kHz) and in the bottom right-hand corner (13.56 MHz) on the back of the card on Proximity Programming only. Permanent
unique MIFARE DESFire 56 Bit serial # cannot be printed on cards.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost.
* The composite construction is recommended for all cards with over-laminate applied
1
2
Page 94 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
MIFARE Classic + MIFARE DESFire EV1 Card - 282
The MIFARE Classic + MIFARE DESFire EV1 contactless card offers multiple High Frequency technologies to simplify card issuance for
diverse systems or migration projects.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
282 Composite 40% Polyester / PVC *
MIFARE Classic High Frequency Technology
N - MIFARE Classic 4K Bytes
Card Programming (Select one option)
B - Programmed MIFARE Classic and MIFARE DESFire EV1 Technology. Specify Programming Information.
P - MIFARE Classic Programmed only, not MIFARE DESFire EV1 Technology. Specify Programming
Information.
A - Non-Programmed MIFARE Classic. Programmed MIFARE DESFire EV1Technology. Specify Programming
Information.
N - Non-Programmed MIFARE Classic and MIFARE DESFire EV1.
Front
MIFARE DESFire EV1 High Frequency Technology
K - MIFARE DESFire EV1 8K Bytes
Front Packaging (Select one option)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
Back
Back Packaging (Select one option)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
MIFARE Classic High Frequency Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
U - UID (CSN) HEX card numbering only (Inkjetted)
V - UID (CSN) Decimal card numbering only (Inkjetted)
Slot Punch
IMPORTANT - Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a badge holder to attach this
card to a lanyard or badge clip.
N - No Slot Punch
MIFARE DESFire EV1 High Frequency Technology Card Numbering3 (Select one option)
M - Sequential Matching Encoded/Printed (Inkjetted)
N - No Printed Card Numbering
S - Sequential Encoded/Sequential Non-Matching Printed (Inkjetted)
R - Random Encoded/Non-Matching Sequential Printed (Inkjetted)
A - Sequential Matching Encoded/Printed (Laser Engraved)4
B - Sequential Encoded/Sequential Non-Matching Printed (Laser Engraved)4
C - Random Encoded/Non-Matching Sequential Printed (Laser Engraved)4
U - UID (CSN) HEX card numbering only (Inkjetted)
V - UID (CSN) Decimal card numbering only (Inkjetted)
Option - Custom Artwork1
(Specify Artwork Number - Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 282NBKGGNNN
Final Part Number
December 2017
N
K
N
-
(Options #)
Page 95 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
MIFARE Classic Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
MIFARE DESFire EV1 Card Programming Information
Format Number
(example: H10301) Bit Numbers
(example: 26 bit) Facility Code
Encoded Card # Start
Stop
Printed Card # Start
Stop
HID Elite ICE Number (if applicable) (Custom Format) Site Code
City Code
OEM Code
Special Instructions:
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small “HID logo” "
" and reference number printed in the lower left-hand corner and a slot punch
target printed on the back of the card.
3 The Printed card number is placed in the bottom right-hand corner for MIFARE 13.56 MHz and in the bottom center for DESFire on the back of the card.
4 For Laser Engraved Printed numbers, consult factory for lead times and cost.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
December 2017
Page 96 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
CREDENTIAL PROGRAMMERS
Understanding HID Credential programmers
HID Global offers two credential encoders enabling field programming of access credentials for use with HID Global’s world class access
control reader portfolio. HID Global offers credential programming for technologies from 125 kHz to 13.56 MHz, including HID Prox, iCLASS,
iCLASS SE and iCLASS Seos. This How to Order Guide provides part numbers and ordering instructions for HID Global’s Credential
Encoders. We currently offer the following credential Encoding solution:
•
The iCLASS SE Encoder, capable of encoding a wide range of credential technologies, including iCLASS Seos, iCLASS SE, iCLASS,
HID Prox, MIFARE Classic and MIFARE DESFire EV1 from single encoder.
Credential Encoder Ordering Basics
The iCLASS SE Encoder is available for sale without a renewable lease agreement since it utilizes a credential credit process to encode
cards.
To order an encoder, use the subsequent pages to
•
Determine the correct Encoder part number by matching the technology and application
•
Fill out the applicable Encoder lease/sales request (if applicable)
•
Fill out the appropriate Credential Credit and format requests
If at any time you require assistance, contact HID Global Sales at www.hidglobal.com/customer-service
December 2017
Page 97 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Encoder Summary
The iCLASS SE Encoder Platform for encoding contactless credentials is:
•
Dynamic - Support for a wide range of credential technologies, including iCLASS Seos, iCLASS SE, and iCLASS, HID Prox, MIFARE
Classic, and MIFARE DESFire EV1 from single encoder.
•
Flexible - Manage custom keys locally or leverage HID standard and Elite keys.
•
Convenient - On-site programming of card stock speeds up the delivery time to obtain and issue cards.
•
Seamless - Encode multi-tech credentials in a single pass, saving time and resources.
HID Global’s iCLASS SE Encoder is an ideal solution for organizations to encode credentials and configure readers. Highly versatile, the
encoder can locally manage HID Global standard Keys, Elite Keys or securely define and manage custom keys. The dynamic iCLASS SE
Encoder has the capability to encode and manage a wide variety of credential technologies, interoperable with iCLASS SE readers. The
solution allows users to upgrade existing card populations for use with higher security iCLASS SE Platform readers. That same flexibility also
supports new credential technologies as they arise.
The iCLASS SE Encoder is available either as a desktop device as the CP1000D, or as an in-line encoder within a FARGO card printer. The
in-line encoder enables organizations to graphically and electronically personalize smart cards in one seamless process, saving time and
energy. This How to Order Guide will provide details for ordering credential credits, formats, and key for both the desktop and in-line encoder.
To find the part number for an in-line encoder inside of a FARGO card printer, see the FARGO card printer How To Order Guide.
iCLASS SE Encoder - How Does it Work?
The iCLASS SE Encoder solution is made up of following components:
•
Hardware - Encoder is available in either a desktop or in-line form factor
•
Software - The encoder solution is compatible with two editions of Asure ID:


Asure ID CP1000 Edition - This edition is included with the purchase of a desktop encoder (CP1000D) and is suitable for
standalone encoding. The solution enables data to be manually entered or to have it automatically increment after each encoded
card.
Asure ID Exchange Edition - This edition is purchased separately and in addition to supporting the desktop encoder is the only
edition which supports the in-line encoder. This solution can also connect to external databases in real-time when
reading/encoding contactless cards.
•
Credential Credits - The encoder utilizes credential credits to enable the encoding of contactless cards. The solution will decrement a
credential credit each time a card has been encoded. Each credential technology and security combination will utilize a specific
credential credit type (i.e. iCLASS Seos card secured with an Elite key). Credential credit part numbers are allocated for Genuine HID or
Third Party Credentials. The iCLASS SE Encoder is able to determine the source of the credential during the encoding cycle and will
decrement the appropriate counter accordingly.
•
Formats - Utilizes pre-defined format templates, eliminating the need to understand access control formatting and card numbering
schemes. HID formats can be ordered using this HTOG but approval may be needed for proprietary formats.
•
Keysets - Supports HID Elite, Standard, or Custom keys. Standard and HID Elite keys can be ordered using this HTOG but approval
will be needed for HID Elite keys.
Page 98 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
The following items are included with each Desktop iCLASS SE Encoder:
1 - CP1000D Desktop Encoder
•
1 - Installation Guide
•
1 - HID USB Flash Drive
•

Asure ID CP1000 Edition Desktop Application

Supporting Technical Documents

Encoder Configuration Package (*.ise file) which includes the H10301 format, media key sets, and reader configuration key sets
Variety of sample cards and credential credits (see table below)
Included Credential Credits
Quantity
Part Number
Description
100,000
CRDT-K0
HID Prox Credential - Access Control
100,000
CRDT-A0
iCLASS Credential - Access Control
100,000
CRDT-A3
iCLASS SE Credential - Access Control
500,000
CRDT-A5
iCLASS (SE) Credential - Custom Data
30
CRDT-D3
iCLASS Seos Credential - Access Control
30
CRDT-D5
iCLASS Seos Credential - Custom Data
100,000
CRDT-B0
HID MIFARE Classic Credential - Access Control
100,000
CRDT-B3
HID MIFARE Classic Credential - Access Control (SIO)
500,000
CRDT-B5
HID MIFARE Classic Credential - Custom Data
100,000
CRDT-F5
Third Party MIFARE Classic Credential - Custom Data
100,000
CRDT-C3
HID MIFARE DESFire Credential - Access Control (SIO)
500,000
CRDT-C5
HID MIFARE DESFire Credential - Custom Data
100,000
CRDT-G5
Third Party MIFARE DESFire Credential - Custom Data
30
CRDT-J0
Configuration Card Generation
Included Sample Cards
Quantity
Part Number
Description
2
1386NGGNB
HID Prox
2
2000CGGNN
iCLASS 2K
2
2003CGGNN
iCLASS 32K
2
3000VGGNN
iCLASS SE 2K
2
3003VGGNN
iCLASS SE 32K
3
5005VGGNN
iCLASS Seos 16K
2
1430NGGNN
MIFARE Classic 1K
2
1440NGGNN
MIFARE Classic 4K
2
1450CNGGNN
MIFARE DESFire EV1 8K
1
0501500295-READER
Reader Data Configuration Applet
1
0501500295-ELITE
HID Elite Prep Transport
1
2000PCCNN-LEGACY
iCLASS Legacy Transport
December 2017
Page 99 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
iCLASS SE Encoder Order Form
We recommend using the iCLASS SE Encoder HTOG Supplement to place an initial iCLASS SE Encoder order or when placing an order for
additional Credential Credits, Key Sets, or Formats. However, the same information from the supplement can be derived from this HTOG.
Do you need to purchase an iCLASS SE Encoder?
(Yes / No)
** If you are replacing a legacy programmer (i.e. CP400 or Prox Programmer) please provide a screen shot of what you are currently
programming today**.
1.
If you are ordering Credential Credits, Keys, or Formats for an existing iCLASS SE Encoder please identify the Encoder Serial
Number (i.e. CPXXXX). The Serial Number can be found on the bottom of the desktop encoder or on the printer product label if
installed within a FARGO card printer.
_______________________________
2.
What email address should HID send the secure file with the Credential Credits, Format, or Key Sets?
_______________________________
3.
To order additional Credential Credits please review the “iCLASS SE Encoder Credential Credit” section and enter additional
Credential Credits to the order in the following table:
Counter Ref Number
(from section below)
Final Part Number
1 HID
CRDT
-
CRDT
-
CRDT
-
Elite was previously known as iCLASS
Elite®.
Quantity
HID Elite1 ICE Number (if
applicable)
Contact customer services for information on the authorization process.
Note: MOQ for all Credential Credits is 100. Maximum of 10,000 of each Credential Credit can be ordered at one time.
4.
To order additional Key Sets please review the “iCLASS SE Encoder - Key Sets” section and enter the final iCLASS Encoder
Keyset part numbers below:
Technology Ref. Number
(from section below)
Final Part Number
Security Ref. Number
(from section below)
CKEYMED
-
-
CKEYCFG
-
-
CKEYSIO
-
-
Note: If you are unfamiliar with smart card key sets, please contact your sales manager prior to ordering.
5.
The iCLASS SE Encoder comes preconfigured with the basic HID Open 26 Bit Wiegand format (H10301), but can also be loaded
with additional formats to provide extended support of credential requirements. To order additional Open non-tracked Proprietary1
and Open Tracked2formats use the following table.
Part Number
Format Number
Facility Code3
(If applicable)
Start Number3
(If applicable)
End Number3
(If applicable)
Quantity3
(If applicable)
FRMT-J1
FRMT-J1
Page 100 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
Corporate/University 1000 Format Credits
Corporate 1000® and University 1000® formats are available for use on the iCLASS SE Encoder. These formats must be ordered separately
from other formats to ensure uniqueness of numbers used in both the iCLASS SE Encoder and within the HID Manufacturing Facilities. Order
the Corporate or University 1000 number ranges using the indicated base part number and by completing the form below:
FRMT- J2 (Corporate/University 1000)1
Quantity
Format Number
Start Number
End Number
1 Authorization
is required. If you are not authorized to use the format, contact customer services for information on the authorization process.
facility codes are automatically registered to the first user of that facility code. If you are not authorized to use the requested facility code, contact customer service for information on the
authorization process. Alternatively state a facility code value of “new” to be automatically assigned and registered with an unused facility code.
Facility Code, Start Number, End Number and quantity do not apply to Open non-tracked formats but do apply to proprietary and Open-tracked formats
2 H10304
3
iCLASS SE Encoder - Credential Credits
The iCLASS SE Encoder utilizes credential credits to enable the encoding of contactless credentials. Each credential technology and security
combination will utilize a specific credential credit. Also note that credential credit part numbers are allocated for Genuine HID or Third Party
Credentials, the iCLASS SE Encoder is able to determine the source of the credential during the encoding cycle and will decrement the
appropriate counter accordingly.
•
Base Part Number CRDT-xx (Select xx from the tables below)
iCLASS and iCLASS Seos Technology Credential Credits
Used to encode Genuine HID Standard iCLASS 2K, 16K, or 32K and credentials or Genuine HID/Third Party Seos credentials.
Security
Credential
Type
Technology
Standard
HID Elite1
SIO
HID Elite1, SIO
Custom Data
A0
A1
A3
A4
A5
Genuine HID
iCLASS
Genuine HID
Seos
-
-
D3
D4
D5
Third Party
Seos
-
-
H3
H4
-
J0
Configuration Cards
1 Authorization
process.
is required by the end user or owner of the HID Elite (formerly iCLASS Elite) keys before these can be released. Contact customer services for information on the authorization
Examples:
Genuine HID iCLASS Credential with Standard Encoding
Genuine HID iCLASS Credential with SIO Encoding
-
CRDT-A0
CRDT-A3
Credential Type
Compatible with
A0
iCLASS Rev A, B, C & iCLASS SE interpreter type “T” with keyset “0”
A1
iCLASS Rev A, B, C & iCLASS SE interpreter type “T” and matching Elite ICE keyset
A3
iCLASS SE readers only interpreter type “T” or “N” with keyset “0”
A4
iCLASS SE readers only interpreter type “T” or “N” with matching Elite ICE keyset
A5
iCLASS Rev A, B, C & iCLASS SE
D3, D4, H3 & H4
iCLASS SE readers
December 2017
Page 101 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
MIFARE Classic Technology Credential Credits
Use to encode Genuine HID or third party MIFARE Classic 1K or 4K credentials.
Security
Credential Type
Technology
Standard
SIO
HID Elite1, SIO
Custom Data
Genuine HID
MIFARE Classic
B0
B3
B4
B5
Third Party
MIFARE Classic
F0
F3
F4
F5
J0
Configuration Cards
Example:
Third Party MIFARE Classic Credential with HID Elite and SIO Encoding
-
CRDT-F4
Credential Type
Reader Compatibility
B0, F0
HID 6055B, FlexSmart® 6071 / 6072 and Smart ID 8030DSHM & 8031DSHM
(HID MIFARE Only)
B3, F3
iCLASS SE readers only (interpreter type “T” or “N”) with keyset “2”
B4, F4
iCLASS SE readers only (interpreter type “T” or “N”) with matching HID Elite ICE keyset
B5, F5
iCLASS SE Migration readers only with matching custom key and mapper profile
1 Authorization
is required by the end user or owner of the HID Elite (formerly iCLASS Elite) keys before these can be released. Contact customer service for information on the authorization process.
MIFARE DESFire EV1 Technology Credential Credits
Use to encode Genuine HID or third party MIFARE DESFire EV1 credentials.
Security
Credential Type
Technology
SIO
HID Elite1, SIO
Custom Data
Genuine HID
MIFARE DESFire EV1
C3
C4
C5
Third Party
MIFARE DESFire EV1
G3
G4
G5
J0
Configuration Cards
Example:
Third Party MIFARE DESFire EV1 Credential with SIO Encoding
Credential Type
1
-
CRDT-G3
Reader Compatibility
C3, G3
iCLASS SE readers only (interpreter type “T” or “N”) with keyset “2” or matching custom key
C4, G4
iCLASS SE readers only (interpreter type “T” or “N”) with matching HID Elite ICE keyset
C5, G5
iCLASS SE Migration readers only with matching custom key and mapper profile
Authorization is required by the end user or owner of the HID Elite (formerly iCLASS Elite) keys before these can be released. Contact customer service for information on the authorization process.
Page 102 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
HID Prox Technology Credential Credits
Security
Credential Type
Technology
Standard
Genuine HID
HID Prox
K0
Configuration Cards
Credential Type
Reader Compatibility
K0
All HID Prox Readers
J0
iCLASS SE Encoder - Keysets
Key Management is a complex subject that requires some understanding of the various technologies and how smart card applications are
managed. For example, encoding data on an iCLASS or MIFARE Classic card requires, at a minimum, a single authentication key to gain
access to the application area or sector. The application data may have additional security enhancements requiring additional keys. The HID
Application for example, requires two DES keys, one key for authentication to the app area and another key for encryption of the application
data, while the Secure Identity Object requires AES keys for encryption and signing the credential. Each technology will differ in terms of the
keys that need to be created and managed. The iCLASS SE Encoder includes utilities for managing individual keys as well as grouping those
keys into Keys sets for ease of deployment.
To ensure your iCLASS SE Encoder is equipped with the correct keys it is necessary to order Keysets appropriately. There are three classes
of keysets available which are explained below.
Media Keyset
Media keysets provide all the cryptographic keys necessary to set up and encode cards. The keys delivered with each part number will vary
depending on the needs of the technology. For instance using the table below the part number CKEYMED-ICL-0 will deliver the iCLASS
media Keyset with Standard or HID Elite keys for accessing the HID application area, the encryption key for the PACS data, and the key for
accessing the SE application area. If you are using HID Elite Credentials, the part number will be CKEYMED-ICL-1.
Part number CKEYMED-MIF-n will deliver Key A and Key B for accessing the HID application on a MIFARE Classic card as well as transport
keys for the MAD (MIFARE Application Directory).
Part number CKEYMED-DES-n delivers keys for accessing the HID application on a MIFARE DESFire EV1 card including the PICC master
key, the application master key and the application read and write keys.
Reader Configuration Keyset
The Reader configuration keyset provides the privacy and authentication keys necessary to create configuration cards. Typically, configuration
cards are needed to push new keys and/or configuration data to the reader. In order to utilize this solution, programmable configuration card
are needed to be ordered.
Part numbers for these cards are 0501500295-READER - used for reader configuration, and
0501500295-ELITE - used for HID Elite key preparation.
December 2017
Page 103 of 105
Readers and Credentials How to Order Guide, PLT-02630, B.0
SIO Keyset
The SIO Keyset provides the privacy and authentication keys for HID's Secure Identity Objects. Because SIOs are independent of card
technology, their keys are ordered separately.
As a default, the iCLASS SE Encoder is loaded with the following Keysets as standard:
iCLASS Media Keyset
– iCLASS and Seos
– Standard (CKEYMED-ICL-0 & CKEYMED-Seos-0)
MIFARE Keysets
– MIFARE Classic & MIFARE DESFire EV1
– Standard (KEYMED-MIF-0 & CKEYMED-DES-0)
Reader Configuration Keyset
– Standard (CKEYCFG-0)
SIO Keyset
– Standard (CKEYSIO-0)
Description
Base Part Number
iCLASS Media Keyset
CKEYMED
Technology
-
Security
ICL - iCLASS
MIF - MIFARE Classic
DES - MIFARE DESFire EV1
SEOS - Seos
Description
Base Part Number
Reader Configuration Keyset
CKEYCFG
-
0 - Standard
1 - HID Elite
SIO Keyset
CKEYSIO
-
0 - Standard
1 - HID Elite
-
0 - Standard
1 - HID Elite
Security
Supplementary Cards
To order cards or tags for use with the iCLASS SE Encoder, please see the Credentials section of this How To Order Guide. Unprogrammed
cards and tags are available for most technologies, and can be ordered separately from the kit for use with your iCLASS SE Encoder.
Page 104 of 105
December 2017
Readers and Credentials How to Order Guide, PLT-02630, B.0
hidglobal.com
December 2017
Page 105 of 105