Model: USVC-series
Utility Shelf – Vented, Clamping
Description:
The USVC-series is engineered to provide secure mounting of
non-rackmount equipment in 19" wide equipment racks and cabinets. The shelf is ideal for consumer electronics, power supplies
and chassis-style components of all kinds. The 19"W x 15"D assembly features two, adjustable-height, “hold-down” brackets that
clamp down on equipment to prevent unintentional movement.
The clamps have a protective rubber strip to prevent marring of
equipment. Two adjustable rear stops help hold components in
place when buttons or controls are depressed. The USVC shelf
is made from 16-gauge steel and has a front and rear flange
(.438") for added strength. Bottom rear is vented and includes
openings to adjust angle-bracket stop devices. Sides feature
obround slots to adjust height of hold-down brackets. Load rating:
50 lbs. Black semi-gloss powder epoxy finish.
Features:
• Rugged 16-gauge US steel.
• Clamping brackets and rear stops to hold non-rackmount
equipment.
• Vented bottom.
• 19"W (17.312" useable) x 15"D
• Three heights available: 2U, 3U, 4U
• Load Rating: 50 lbs.
• Black semi-gloss powder epoxy finish.
• Made in the USA.
.438"
19.000"
18.312"
.438"
A & E Specifications:
The shelf for 19"W rackmount use shall be Lowell Model
_________. Shelf shall have a panel space height of ______. It
shall include two adjustable-height hold-down brackets for top
support of non-rackmount equipment, two angle stops for rear
alignment of equipment and bottom ventilation. It shall be 16gauge US steel finished in black powder epoxy paint. Load capacity shall be 50 lbs.
17.425"
15.000"
.843"
Model No.
Description
Former No.
Rack Units
Panel Space
Depth
Useable Width
USVC-215
USVC-315
USVC-415
Utility Shelf – Vented, Clamping
Utility Shelf – Vented, Clamping
Utility Shelf – Vented, Clamping
L10-315
L10-515
L10-715
2
3
4
3.50"
5.25"
7.00"
15"
15"
15"
17.312"
17.312"
17.312"
One rack unit = 1.75"
Spec. No. 1090
(rev. 03.09.11)
pg. 1 of 1
©2011 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660 Fax—
636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to change
specifications and/or improve manufacturing methods without notification. (lowellmfg.com)