POWX1183 1 APPLICATION .........................................................

POWX1183
EN
1
APPLICATION .................................................................................. 2
2
DESCRIPTION(FIG.1) ...................................................................... 2
3
PACKAGE CONTENT LIST ............................................................. 2
4
SYMBOLS ........................................................................................ 2
5
GENERAL POWER TOOL SAFETY WARNINGS .......................... 3
5.1
Work area ................................................................................................................ 3
5.2
Electrical safety ....................................................................................................... 3
5.3
Personal safety ....................................................................................................... 3
5.4
Power tool use and care ......................................................................................... 4
5.5
Service ..................................................................................................................... 4
6
ADDITIONAL SAFETY INSTRUCTIONS FOR HAMMER DRILLS 4
7
BEFORE USING THE TOOL FOR THE FIRST TIME ..................... 5
7.1
Fitting and changing tools (Fig. 2) ......................................................................... 5
7.2
Removing SDS-Max tool ......................................................................................... 5
8
OPERATION ..................................................................................... 6
8.1
Switching ON/OFF................................................................................................... 6
8.2
Handle attachment (Fig. 3)...................................................................................... 6
8.3
Use (Fig. 4................................................................................................................ 6
9
CLEANING AND MAINTENANCE................................................... 6
9.1
Cleaning................................................................................................................... 6
10
TECHNICAL DATA .......................................................................... 7
11
NOISE ............................................................................................... 7
12
SERVICE DEPARTMENT ................................................................ 7
13
STORAGE ........................................................................................ 7
14
WARRANTY ..................................................................................... 8
15
ENVIRONMENT ............................................................................... 8
16
DECLARATION OF CONFORMITY ................................................ 9
Copyright © 2015 VARO NV
P a g e |1
www.varo.com
EN
POWX1183
DEMOLITION HAMMER 1050W
POWX1183
1 APPLICATION
The machine is intended for hammer drilling in concrete, brick and stone, as well as for light
chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic.
It is not designed for commercial use.
Warning! Read this manual and general safety instructions carefully before
using the appliance, for your own safety. Your power tool should only be
passed on together with these instructions.
2 DESCRIPTION(FIG.1)
1.
2.
3.
4.
5.
SDS Chuck
Fastening sleeve
Auxiliary handle
Oil cover
Collar of auxiliary handle
6.
7.
8.
9.
Lock on button
(Anti Vibration System)
On/off switch
Handle
3 PACKAGE CONTENT LIST





Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!




Demolition Hammer 1050W
Auxiliary handle
Spanner
Grease cup
- SDS point chisel: 280mm
- SDS flat chisel: 18 x 280mm
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read manual before use
In accordance with essential
requirements of the European
directive(s)
Class II - The machine is
double insulated; Earthing wire
is therefore not necessary.
Always wear safety goggles
Copyright © 2015 VARO NV
P a g e |2
www.varo.com
POWX1183
5 GENERAL POWER TOOL SAFETY WARNINGS
EN
Read all safety warnings and all instructions. Failure to follow all warnings and instructions
may result in electric shock, fire and/or serious injury. Save all warnings and instructions for
future reference. The term "power tool" in the warnings refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
5.1
Work area
 Keep work area clean and well lit. Cluttered and dark areas invite accidents.
 Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
 Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
5.2
Electrical safety
Always check that the power supply corresponds to the voltage on the
rating plate.






Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
5.3
Personal safety
 Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious
personal injury.
 Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used whenever conditions require
will reduce personal injuries.
 Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying power tools with your finger on the switch or plugging in power tools that have
the switch on invites accidents.
 Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
 Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
Copyright © 2015 VARO NV
P a g e |3
www.varo.com
EN
POWX1183

If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.4
Power tool use and care
 Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
 Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
 Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
 Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
 Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5
Service
 Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR HAMMER DRILLS
















Check the voltage (volt) marked on the rating plate.
When using cable drums, run all the cable off the drum. Minimum conductor cross section:
1.0 mm².
When using the electric hammer drill outdoors, connect to the power supply with a type
H07RN-F 3G 1.5 mm² extension cable and rain-water-protected plugs in proper working
order.
Make sure of your footing on ladders and scaffolding when drilling free-handed.
Use a line detector to localize lines in walls with concealed electric, water or gas lines.
Avoid touching live components or conductors.
Wear ear muffs to protect your hearing. Loss of hearing can be a gradual process!
Wear goggles and use a dust mask on jobs generating dust.
Do not use in areas where there are vapours or flammable liquids.
Always pull the plug out of the socket before cleaning or making changes to the machine.
Protect the power cable from damage. Oil and acid can damage the cable.
Never overload the machine.
Secure all workpieces sufficiently.
Important! It is imperative to follow all national safety regulations concerning installation,
operation and maintenance.
Chisel bits and drill bits may be flung out of the machine accidentally and cause serious
injury:
Before starting to work, always check that the chisel or drill bit is property locked in the
chuck.
Examine the chuck regularly for signs of wear or damage.
Copyright © 2015 VARO NV
P a g e |4
www.varo.com
POWX1183









EN
Never start up a hammer tool until it pressed against a workpiece (wall, ceiling, etc.).
When you are finished, unplug the hammer drill from the electric supply and remove the
chisel or drill bit Irom the machine.
Always disconnect the hammer drill Irom the electric supply before you change a chisel or
drill bit.
Protect your eyes and other workers from flying particles and splinters. Wear a helmet! Set
up partition walls!
Wear work gloves to protect fingers from bruising and grazing.
Vibrations can injure the hand-arm system. Keep exposure to vibrations as short as
possible.
Always lead the mains cable away backwards from the device.
Store the device where it is inaccessible to children.
When carrying out work, always hold the device with both hands and ensure that you have
a stable standing position.
7 BEFORE USING THE TOOL FOR THE FIRST TIME




Examine the place where the device is to be used for hidden electrical cables, gas and
water pipes using a pipe finding device.
Before connecting to !he mains, ensure care that the mains voltage corresponds to the
details on the rating plate.
Ensure that the power switch is in the OFF position. If the plug is connected to a mains
while the power switch is in the ON position, the power tool will start operating
immediately, which could cause serious accidents.
When the work area is removed from the power source, use an extension cord of sufficient
thickness and rated capacity. The extension cord should be kept as short as practicable.
7.1
Fitting and changing tools (Fig. 2)
The device is equipped with a SDS-Max attachment system.
 Clean tools and grease with a thin layer of machine grease before fitting.
 Pull back fastening sleeve and hold.
 Push and rotate the dust-free tool into the tool holder as far as it will go. The tool will lock
automatically.
 Check that it has locked by pulling the tool
7.2
Removing SDS-Max tool
Pull back fastening sleeve, hold and remove tool.
Accessories can be hot after use. Don’t touch the tip of accessory by hand!
Please always use protective floves to remove accessory.
Copyright © 2015 VARO NV
P a g e |5
www.varo.com
EN
POWX1183
8 OPERATION
8.1
Switching ON/OFF
 Switching on:
Press the operating switch (8).
 Switching off:
Release the operating switch(8)
For continuous operation just press the lock-on button (6) on the left side of the handle. the
lock-on button can be release by pressing the switch trigger again.
8.2
Handle attachment (Fig. 3)
For reasons of safety, only use the hammer drill with handle attachment.
You will be able to obtain a safe body position when working by rotating the handle attachment.
 Install the fastening screw, camping block and frame successively onto the handle.
 Place the collar onto the collar mount and then let the two holes of collar at the both ends
of the clamping block.
 Adjust the handle subassembly to a desire position, finally securely tighten the handle.
 remove the auxiliary handle subassembly in the opposite way.
8.3
Use (Fig. 4
 After placing the tip of the tool on concrete surface, switch the tool ON.
 By utilizing the weight of the machine and by firmly holding the demolition hammer with
both hands, you can control the subsequent recoil motion.
After long time of use, the cylinder case becomes hot. Therefore, be careful
not to burn your hands.
Don’t apply big pressure on the machine. The hammer mechanism is
activated by applying a slight pressure on the tool when the chisel bit is in
contact with the work-piece.
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
9.1




Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
Copyright © 2015 VARO NV
P a g e |6
www.varo.com
EN
POWX1183
10 TECHNICAL DATA
Rated Voltage
Rated Frequency
Rated Power
Rotation speed
Protection class
Impact rate
Cable length
220-240 V
50 Hz
1050 W
750 min-1
II
4300 min-1
3 m + VDE plug
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
98 dB(A)
Acoustic power level LwA
105 dB(A)
ATTENTION! Wear
over 85 dB(A).
aw (Vibration)
hearing
protection
18,4 m/s²
when
sound
pressure
is
K = 1,5 m/s²
12 SERVICE DEPARTMENT


Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
13 STORAGE




Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don’t keep it in plastic bags to avoid humidity build-up.
Copyright © 2015 VARO NV
P a g e |7
www.varo.com
POWX1183
EN
14 WARRANTY














This product is warranted for a 36-month period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase.
Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-moulded case if applicable to the unit), accompanied by proof of
purchase.
15 ENVIRONMENT
Should your appliance need replacement after extended use, do not discard it
with the household rubbish but dispose of it in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.
Copyright © 2015 VARO NV
P a g e |8
www.varo.com
EN
POWX1183
16 DECLARATION OF CONFORMITY
VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,
Product : Demolition Hammer
Trade mark : POWERplus
Model : POWX1183
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives, based on the application of European harmonized standards. Any
unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature);
2011/65/EU
2006/42/EC
2004/108/EC
2000/14/EC Annex V
LwA
104dB / 105dB SNCH / Sandweiler
European harmonized standards (including, if applicable, their amendments up to the date of
signature);
EN60745-1 : 2009
EN60745-2-6 : 2010
EN55014-1 : 2006
EN55014-2 : 1997
EN61000-3-2 : 2006
EN61000-3-2 : 2008
Keeper of the Technical Documentation : Philippe Vankerkhove, VARO – Vic. Van Rompuy
N.V.
The undersigned acts on behalf of the company CEO,
Philippe Vankerkhove
Regulatory Affairs – Compliance Manager
Date : 13/02/2015
Copyright © 2015 VARO NV
P a g e |9
www.varo.com