SM427 | Bicycle Handlebar Mount with Universal Holder

SM427 ||IPM515
SM515
BicycleSlim-Grip™
Handlebar
Mini
Mount
Windshield
with Universal
Suction andHolder
Dashboard Smartphone Mount
Package Contents:
(1) SM050-HPB-2 Universal phone and portable device holder
(4) SP-SM050-SF-HPB - Standard support legs for Slim-Grip™ holder
(1) GN015-HPB-2 - Mini Windshield Suction and Dashboard Mount
(1) AP013 - Circular Adhesive Dashboard Disc
(1) SP-SM050-LF-HPB - Extra Long Support Legs (2 Pack) for larger phones
SM050-HPB-2 Slim-Grip™
Universal Phone Holder
AP013
Circular Adhesive
Dashboard Disc
SP-SM050-LF
Extra Long
Support Legs
(2 Pack)
GN015-HPB-2
Mini Windshield
Suction Pedestal
88mm expandable to 120mm
and up to 138mm with Extra
Long Support Legs
Holder included is Universal, designed to fit nearly ALL non-flip mobile phones
regardless of whether a protective case or silicone sleeve is attached to the phone.
• Palm - All non-flip models
• Most smartphones, mobile phones, and
• LG Mobile Phones - All non-flip models
cell phones having heights between
• Samsung - All non-flip models
80mm and 138mm tall
• Sony Ericsson - All non-flip models
• Apple iPhone - All models
• Sanyo - All non-flip models
• RIM BlackBerry - All non-flip models
• Pantech - All non-flip models
• HTC Phones - All non-flip models
• Motorola Phones - All non-flip models
• Google - All non-flip models
• Nokia Mobile Phones - All non-flip models
All brand names and product names are trademarks or registered trademarks of their respective owners.
Windshield Mounting
Connecting the Slim-Grip™ Holder to Dual T-Tab Pedestal
Step 1.
Step 1.
Find a safe location on the interior of the vehicle’s windshield
to mount the pedestal. Firmly push the suction base (A)
against the windshield and flip the base lever down (B) to the
locked position. See diagram below.
Connect the dual T-slots (A) on holder to the dual T-tabs (B) on
the pedestal head.
B
A
Optional Cord
Catcher
B
A
Install the Support Legs to the Holder
Step 1.
Insert the holder support legs (A) by sliding them into the
support leg grooves (B) on the top and bottom of the holder.
B
A
A
Insert Phone into Holder
Step 1.
Secure holder with your hand for support, as spring-loaded
mechanism requires significant force to operate. Hold your phone
and insert into universal holder by pushing down on the bottom
spring-loaded support legs with moderate amount of pressure
(C). Slide the top of the device under the top support legs (D) until
it fits snuggly in the holder.
D
A
B
A
C
Continued on other side...
!
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this mount.
®
The Mobile Mounting Specialists™
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China
© Copyright 2010 Arkon Resources, Inc.
SM515 | IPM515 Slim-Grip™ Mini Windshield Suction and Dashboard Smartphone Mount
Step 5. Push the pedestal suction cup (A) down onto the disk (C). Flip the
lever (B) down to secure the suction cup. Adjust the angle of the
pedestal head as needed.
Adjusting Holder to Fit Phone
Fitting for Larger Phones
E
For larger phones such as the T-Mobile G2 and Motorola Droid X,
install the two included extra long support legs
Step 1. Insert the extra long support legs (A) by sliding them into the
support leg grooves (B) on the bottom of the holder.
E
Step 1. If necessary, adjust the support legs (E) on top and bottom by
sliding them laterally to avoid any buttons or ports that may be
on your phone.
Dashboard or Console Mounting Instructions
Step 1. Choose a suitable location for disc (and pedestal) installation.
Do not place mount in or near an air bag deployment zone
or where it will obstruct view of the road or hinder vehicle
operation.
A
Step 2. Clean the dashboard or console surface area thoroughly with
the included alcohol pad. Allow the area dry before applying
the mounting disc.
B
A
Insert Phone into Holder
Step 1.
Step 3. Remove the paper backing of the disc and place on the
cleaned surface. Press the top of the disc down firmly to allow
the adhesive to stick to the surface. Allow 24 hours for the
adhesive to cure to the surface before applying any pressure.
Secure holder with your hand for support, as spring-loaded
mechanism requires significant force to operate. Hold your
phone and insert into universal holder by pushing down on the
bottom spring-loaded support legs with moderate amount of
pressure (C). Slide the top of the device under the top support
legs (D) until it fits snuggly in the holder.
D
Step 4. Place the suction cup of the pedestal firmly down on the center
of the mounting disc and lower the securing lever.
B
A
C
!
C
Continued in
next column...
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this mount.
®
The Mobile Mounting Specialists™
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China
© Copyright 2010 Arkon Resources, Inc.