3508538 BV 1 Beo4 GUIDE

3508538 BV 1 Beo4 GUIDE
BeoVision 1
Guide
Contents of the Guide
Your key to using BeoVision 1
The following is an index to the contents of
the Reference book with page references:
•
•
•
•
•
•
•
•
How to set up BeoVision 1, 4
Connect your TV cables, 5
Connect a video tape recorder, 6
Connect a decoder, 7
Connect a set-top box, 8
Connect a DVD 1, 9
Audio system with BeoVision 1, 10
Distribute sound and pictures with
BeoLink, 12
• Set up BeoVision 1 in a link room, 14
•
•
•
•
First-time setup of BeoVision 1, 16
Register extra equipment, 18
Edit tuned TV programs, 20
Re-tune or add programs, 24
•
•
•
•
•
•
Settings for TV position, 26
Choose menu language, 27
Adjust sound settings, 28
Adjust picture settings, 30
Set the time and date, 31
Switch BeoVision 1 on or off
automatically, 32
4 Using the Beo4 remote control
5 Use the menus
5 Use the on-screen display
Watch television
6
6
7
7
Step through tuned programs
See list of all programs
Adjust the picture format
Turn BeoVision 1 to the left or right
Sound adjustment
8 Adjust or mute the sound
8 Change sound type or language
9 Adjust speaker balance and choose
speaker combination
Look up Teletext information
10 Navigate in Teletext
11 Create or delete MEMO pages
11 Use MEMO pages
• The PIN-code system, 34
• Looking after BeoVision 1, 36
• Close-up operation and socket panel, 37
• Socket panel on the rear, 38
• If you have a BeoCord V 8000 video tape
recorder…, 40
• If you have a Set-top Box Controller…, 44
• For your information…, 48
Use program Groups
12 Select programs in a Group
12 Create Groups
13 Move programs within a Group
3
Your key to using BeoVision 1
4
Using the Beo4 remote control
Look through the basic principles of the Beo4
remote control and try them out. Each button
is explained below.
Switch on to TV programs
Switch on a connected source and the
BeoVision 1 to watch set-top box programs,
videotapes or DVDs
Use the number buttons to select programs,
Teletext pages, DVD chapters and titles, and
CD tracks
Enter information in on-screen menus. Press
TV
SAT
V TAPE
DVD
TV
LIGHT
RADIO
SAT
DVD
CD
V TAPE
RECORD
A TAPE
7
8
9
4
5
6
1
2
3
TEXT
0
MENU
TV
FORMAT
MENU
0–9
ss
tt
TEXT
*Refer to Beo4’s own Guide for information
about how to add extra functions to those
shown in the Beo4 display.
The Beo4 display shows the source you have
selected, or extra functions available when
you press the LIST button
Press MENU to call up the main SETUP menu. If
you have selected STB as your source, pressing
MENU calls up the Set-top Box Controller
menu. Press MENU a second time for the main
SETUP menu
Press to call up Teletext
ss or tt while e.g. TV is on to select a program
∧
∨
Group you have created
Press GO to select your display option
GO
GO
EXIT
Step up or down through programs or menu
items
Exit on-screen menus
▲
•
▼
LIST
Reveal additional functions in the Beo4
display, e.g. FORMAT*
Adjust volume – press the middle to mute
sound
LIST
STOP
EXIT
Switch BeoVision 1 to standby
5
Use the menus
The on-screen display
The menus on the BeoVision 1 screen gives
you access to a number of different options.
When you enter the menu system, the first
available menu is the SETUP menu.
The on-screen display keeps you informed of
the source you have selected, etc.
Menu name
TV SETUP
TV
PROGRAM GROUPS
TUNING
Menu options
Option
contents
Information
field
TV
MENU
EDIT PROGRAMS
PLAY TIMER
ADD PROGRAM
OPTIONS
AUTO TUNING
STAND POSITIONS
MANUAL TUNING
LINK FREQUENCY
EDIT PROGRAM
ADD PROGRAM
AUTO TUNING
back
select
1 DR1
2 TV2
........
GO 3
back
Press to switch on the
television
Press to call up the TV SETUP
menu
Press to move between the
different menu options
▲
▼
ss
TV TUNING
TIMER RECORDING
tt
Press to reveal different
settings
GO
Press to call up a menu or store
a setting you have made
EXIT
Press to leave the menu system
select
GO
Watch television
6
You can find a TV program which is
tuned into your BeoVision 1 in four
ways…
– By stepping through all tuned
programs;
– By using the number keys to key
in the number of the program you
want;
– By calling up a program list of all
the tuned programs;
– By selecting a program Group.
Refer to the chapter Use program
Groups for more information.
While watching television you can
also adjust picture format and turn
the BeoVision to the left or right.
Step through tuned programs
See list of programs
To start watching television, press TV on the
Beo4 remote control. The television
automatically switches on to the last program
you watched.
Choose a source, for example TV, and press
and hold GO on the Beo4 remote control to
call up a complete list of the available TV
programs. You can also call up a program list
for Groups of programs.
TV
Press TV to switch on BeoVision 1
TV
Press to switch on the television
BBC
▲
▼
1–9
SAT
Press ▲ or ▼ to step up or down
through the available TV
programs
GO
Use 1 – 9 to key in the number
of the TV program you want
Press another source button, e.g.
SAT, to switch to Set-top box
programs
Press and hold to call up the TV
program list
Step up or down through the
available programs
▲
▼
GO
Press to call up the chosen
program, or…
0–9
key in the number of the
program you want to see
Pressing 0 will swap between the current and
previous TV programs.
Call up the program list for a specific Group…
TV
Press to switch on the television
BBC
ss
tt
MY GROUP
GO
Press to call up the chosen
Group
GO
Press and hold to call up the
program list for this Group
ss
NOTE! Refer to the separate Reference book for
information about how to tune in TV programs.
Set-top box programs are only available if
BeoVision 1 is equipped with a built-in Set-top
Box Controller and a set-top box is connected.
Press ss or tt repeatedly to step
through your Groups
tt
Press ss or tt to see the program
lists for all the other Groups
7
If your BeoVision 1 is equipped with the
motorised stand, you can turn BeoVision 1 to
the left or to the right via Beo4. You can also
turn BeoVision 1 manually.
1–2
select
GO
The program list for TV is now called up. It
provides you with an overview of all your available
TV programs.
NEWS
DR2
TV2
EUROSPRT
ZDF
RTL7
BBC
CNN
group
The picture format you choose is changed on
the screen accordingly, either to a 16:9
widescreen picture or a standard 4:3 picture.
The picture format you choose is not stored,
when you switch to a different program or
switch off BeoVision 1, the standard 4:3
picture format is restored.
FORMAT
DR2
TV2
........
EUROSPRT
ZDF
RTL7
........
BBC
........
........
........
CNN
N3
........
SAT 1
SVT 2
NRK
TV4
more
Turn BeoVision 1 to the left or right
LIST
TV PROGRAM LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Adjust the picture format
select
GO
Groups list… TV programs selected for a Group
also appear in the program lists for all tuned TV
programs.
Press repeatedly until FORMAT
appears in the Beo4 display
Press 1 or 2 to select a picture
format: FORMAT 1 for a 4:3
picture, or FORMAT 2 for a 16:9
picture
LIST
STAND
ss
tt
1–9
Press repeatedly until STAND
appears in the Beo4 display
Press to turn BeoVision 1 either
to the left or the right, or
Use the number keys to choose a
pre-defined position; 1
represents the outmost left
position, 9 represents the
outmost right position
Refer to the chapter Settings for TV position in the
separate Reference book for more information
about how to preset viewing positions for
BeoVision 1.
Adjust sound
8
Several sound adjustments possibilities
are available in your BeoVision 1.
You can always adjust the volume or
mute the sound completely.
Adjust or mute the sound
Change sound type or language
While you are watching television, you can
adjust the sound volume at any time or mute
the sound completely.
If different sound types or languages are
available, you can store your favourite sound
type when tuning in your TV programs.
However, it is also possible to choose between
sound types or languages when watching a
program.
If programs are broadcasted with
different sound types or languages,
you can choose between them.
If speakers are connected to your
BeoVision 1, you are free to choose
the speaker combination you prefer.
When you switch on BeoVision 1 or
one of the sources connected to it,
the speakers you may have
connected, can be cut in or out,
depending on what kind of sound
suits the source you are using.
NOTE! Refer to the chapter Socket panel on the
rear in the separate Reference Book for more
information on how to connect speakers and to
the Guide supplied with the suround sound
module for more information on surround sound.
∧
∨
Press ∧ or ∨ to adjust the
volume up or down
LIST
SOUND
Press repeatedly until SOUND* is
shown in the Beo4 display
VOL 26
GO
∧
∨
Press in the middle of the ∧ and
∨ button to mute the sound
Press to see the current sound
type on your screen
STEREO
Press repeatedly to switch to
another sound type or language
in a multi-language programme
EXIT
Press to exit the SOUND function
GO
MUTE
∧
∨
MONO
Press ∧ or ∨ again to bring the
sound back
*In order to display SOUND on Beo4, you must
first add it to the Beo4 list of functions. Refer to
Beo4’s own Guide for further information.
9
Adjust speaker balance and choose
speaker combination
When you connect loudspeakers to your
BeoVision 1, you can adjust speaker balance
and choose a speaker combination at any
time.
LIST
SPEAKER
ss
tt
Press repeatedly until SPEAKER is
shown in the Beo4 display
Press to adjust the balance
between the left and right
speakers
1–3
Press to select a speaker
combination
EXIT
Press to exit the SPEAKER
function
Speaker combinations
SPEAKER 1
Sound in the television speakers only. For
programmes with dialogue, e.g. TV news.
SPEAKER 2
Stereo sound in the two external front speakers.
The BeoLab 2 subwoofer is active. For music
CDs.
SPEAKER 3
The television speakers, external front speakers
and the BeoLab 2 subwoofer are active. For TV
programmes in stereo.
Refer to the chapter Adjust sound settings in the
separate Reference book for further information
on presetting a speaker combination.
Look up Teletext information
10
Teletext offers you a wealth of
information. BeoVision 1 helps you
find it fast.
The arrow keys on Beo4, the menu
bar at the top of the screen and the
highlighted cursor help you move to
the page you want in a single step.
When you get there, you can pause
the turning of subpages to read them
at your own pace.
BeoVision 1 can remember your
favourite pages, bring you back to the
previous page, reveal hidden
messages or help you switch to
another program’s Teletext service.
Via the SETUP feature, you can make
as many as 9 favourite MEMO pages
on each available Teletext service.
Save a page with Teletext subtitles as
MEMO page number 9, and Teletext
subtitles appear automatically when
this program is shown.
Navigate in Teletext
Navigate through Teletext pages by using the
menu bar at the top of the Teletext page.
PAGE PROGRAM POINT HALT REC SETUP
P100 BBC
S100
Ons 13 Oct
12:39:34
PAGE PROGRAM POINT HALT REC SETUP
P100 BBC
S100
Ons 13 Oct
12:39:34
Press TEXT to gain access to Teletext and EXIT to
leave Teletext.
If you press EXIT and leave Teletext before the
page you want is found, the display TEXT advises
you when the page is found. Press GO to see the
page. Please note that no such notification will
appear if you e.g. change programs or leave
Teletext by selecting a new source, such as
V.TAPE.
To move to a new page…
> Key in the number of the page you wish to
see, or…
> press ss to move the highlighted cursor to
PAGE.
> Press ▲ or ▼ to step between pages, and hold
to step faster.
> Pressing GO steps to index pages (100, 200,
300, etc.).
To switch using visible page references…
> Press tt to move the cursor on the bar to
POINT.
> Press GO or ▼ to place the cursor on the page.
> Move the cursor via the arrow keys to a page
reference and press GO.
To go back to the previous page…
> When you use POINT to step to another page,
POINT on the menu bar will change to
RETURN.
> Press GO while on the new page to go back to
the previous page.
RETURN will only bring you one step back. Go
back to other previously viewed pages by using
the PAGE or MEMO functions.
To move to another Teletext service…
> Press tt to move the highlighted cursor to
PROGRAM.
If MEMO pages have been created, MEMO will
be highlighted when you switch on Teletext.
Press ▲ or ▼ while MEMO is highlighted to
find PROGRAM.
> Press GO to call up a program list.
> Press ▲ or ▼ to find a desired program.
> Press GO to switch to another Teletext service.
11
Create or delete MEMO pages
Use MEMO pages
Your most frequently viewed Teletext pages
can be saved as MEMO pages, making them
easier to call up when viewing a Teletext
service. You can save 9 favourite MEMO pages.
If you have made favourite MEMO pages, you
can step between them directly.
PAGE MEMO1
POINT HALT REC SETUP
P100 BBC
S100
Ons 13 Oct
12:39:34
PAGE MEMO2
POINT HALT REC SETUP
P100 BBC
S100
Ons 13 Oct
12:39:34
To stop subpages from turning…
> Press STOP to stop subpages from turning,
or…
> move the cursor to HALT and press GO. HALT
will be replaced by a set of four digits.
> Use ▼ and ▲ to step to the subpage you wish
to see, or key in its number.
> Press GO to restart page turning.
To reveal hidden messages and the like…
> Move the cursor on the bar to .
> Press GO to change SETUP to REVEAL.
> Press GO again to reveal hidden text on the
current page.
To create a MEMO page…
> Find a page you view often.
> Press ss or tt to move the cursor along the
menu bar to SETUP and press GO. The 9
available MEMO slots are shown by number.
The first is highlighted.
> Press GO to store the current page. The cursor
moves to the next available MEMO slot.
> Use the number keys on Beo4 to select the
next teletext page you wish to store.
> Repeat the procedure for each page you wish
to store.
> To leave the MEMO setup, press ss or tt to
move the cursor to BACK and press GO.
If you would like available Teletext subtitles to
appear automatically for a particular program,
store the Teletext subtitles page as MEMO page 9.
To delete a MEMO page…
> Press ss or tt to move the cursor to SETUP and
press GO.
> Move the cursor to the MEMO page you wish
to delete and press the yellow button.
> Press the yellow button again to confirm.
To view MEMO pages…
> Press TEXT to call up Teletext.
> Press ▲ or ▼ to move between MEMO pages.
> Press EXIT to leave Teletext.
Use program Groups
12
If you have stored a lot of programs
and want to get to your favourites
quickly without going through the
list each time, put them in a Group.
You no longer need to step through
programs you do not use.
Name the Groups after the people
who watch them – ‘Dad’ or ‘Mary’ –
or according to the types of
programs included, like ‘News’ or
‘Sports’.
When you have created and selected
a particular Group, you only step
through the TV or STB* programs
belonging to this particular Group.
Switch to a different Group to watch
a different set of programs or switch
from GROUPS to TV to see all the
tuned TV programs.
Select programs in a Group
Create Groups
You can gain access to your Groups by
activating Groups mode. Press the arrow keys
to select the Group you are looking for, then
step through the programs in this Group.
It is possible to put together 8 different
program Groups in BeoVision 1, grouped either
by user or by program type. Each Group can
contain up to 18 programs. ‘Copies’ of the same
program can be stored in different Groups.
TV
ss
tt
MY GROUP
GO
NEWS
▲
▼
1–9
TV 2
BBC
ss
tt
SPORT
GO
Press to switch on the television
Move left or right until GROUPS
is displayed
When you find the Group you
want, press GO to select your
Group
Step up or down through the
programs in that particular
Group, or use the number keys
to key in the number of the
program you want to see
TV SETUP
TUNING
GROUP1
TIMER RECORDING
...
PLAY TIMER
...
OPTIONS
...
STAND POSITIONS
...
...
GROUP1
. . .
. . .
back
...
...
select
name
new group
A
character
next
accept
GO
PROGRAM GROUPS
MY GROUP
...
name
move
create
GO
COPY TV
TO MY GROUP
1 DR2
2 TV2
3........
4 EUROSPORT
5 ZDF
6 ARD
7........
..
..
15 SAT 1
16 SVT 2
17 NRK
18 TV4
DR2
SKY NEWS
ZDF
RADIO 2
BBC
copy
accept
*NOTE! In order to receive set-top box (STB)
programs, your BeoVision 1 must be equipped
with a built-in Set-top Box Controller and a
set-top box must be connected.
GO
PROGRAM GROUPS
Move left or right to switch to
another Group – and press GO
to call it up
Press and hold GO in Groups mode to view a
program list for the current Group.
PROGRAM GROUPS
PROGRAM GROUPS
GO
move
create group
GO
13
Move programs within a Group
You can rearrange the order in which your
programs appear within a Group and delete
programs in a Group.
> Press TV to switch on the television.
> Press MENU to call up the TV SETUP menu,
PROGRAM GROUPS is already highlighted.
> Press GO to call up the PROGRAM GROUPS
menu.
> Press ▼ to move the cursor to an empty Group
and press the green button to be able to name
a new Group.
> Press ▲ or ▼ for characters and ss or tt to
move to the next or previous character space.
> Press GO to store the name, and press GO
again to be able to copy programs into the new
Group.
> Press ▲ or ▼ to find a program you wish to
copy to the new Group.
> Press tt to copy a TV program to your Group.
> Press GO to store your Group.
> Press ▲ to back up through previous menus or
press EXIT to exit on-screen menus directly.
NOTE! Set-top box programs cannot be combined
with TV programs in the same Group. For more
information about how to make STB program
Groups, refer to the chapter in the separate
Reference book entitled If you have a Set-top Box
Controller.
NEWS
DR2
TV2
EUROSPRT
ZDF
RTL7
BBC
CNN
group
select
GO
> Press TV to switch on the television.
> Press MENU to call up the TV SETUP menu.
PROGRAM GROUPS is already highlighted.
> Press GO to call up the PROGRAM GROUPS
menu.
> Press ▼ to highlight a Group and press GO to
select it.
> Press ▼ to highlight the program you wish to
move or delete.
> Press tt to move the program out of the list
and press ▲ or ▼ to move it to the new
position.
> Press ss to move the program back into the list,
or press the yellow button to delete it. When
you delete a program in the list, the remaining
programs contract.
> If the program changed places with another
program, then move this program to a new
position.
> Once you have finished moving or deleting
programs in a Group, press GO to store the
Group.
> Press ▲ to back up through previous menus or
press EXIT to exit on-screen menus directly.
Technical specifications, features and the use
thereof are subject to change without notice.
3508538
0208
Printed in Denmark by Bogtrykkergården a-s, Struer
www.bang-olufsen.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement