How to use your Hive Thermostat

How to use your Hive Thermostat
How to use your
Hive Thermostat
A warm welcome to Hive
What can my Hive thermostat do?
It’s time to enjoy clever heating and hot water control with your Hive thermostat.
Heating Hot Water
Boost
Heating
Boost
Hot water Page 8
If you’ve got a separate hot water tank, you can control
your hot water too.
Screen
Dial
•Turn your hot water on or off
•Set up a schedule for your hot water
•Boost your hot water
Confirm
Other features Page 12
Troubleshooting Page 13
Hive Multizone Page 19
Back
Menu
Hot tip: If you’ve bought Hive Active Heating™ for help controlling your
heating and hot water remotely, visit hivehome.com
1
Page 4
•Turn your heating temperature up or down using the dial
•Set up a schedule for your heating
•Boost your heating
2
Getting started
Heating
How to change the temperature:
How to change mode:
1 Turn the dial clockwise to increase the target temperature.
Your thermostat has 3 different heating modes: Schedule, Manual and Off
1 Push the dial to wake up the thermostat.
2 Your heating will come on if the target temperature is above
the actual temperature.
2 Once the screen turns on press the Menu
3 Turn the dial anti-clockwise to lower the target temperature.
button and select Heat.
3 Here you’ll see the different modes: Schedule, Manual and Off.
4 Select one by turning and pushing the dial.
M O N 19:25
MANUAL
ON
20˚
TARGET
3
16˚
ACTUAL
Schedule turns your heating on and off when you want it to and can
be more energy efficient.
Manual makes sure your home maintains a constant temperature.
Off leaves your heating in Frost Protection – so your heating will only
on the screen
come on if your home drops below 7°C. You’ll see
to remind you that Frost Protection is enabled.
4
Heating
How to view your heating schedule:
Setting up a heating schedule:
1 Push the dial to wake up the thermostat.
2 Once the screen turns on press the Menu
button.
Your thermostat will walk you through setting up your heating
schedule step by step.
3 Turn the dial to select Heat, then push the dial.
To do this:
5 Turn the dial left or right to browse through the days and to select a day.
1 Wake up your thermostat by pushing the dial and then
press the Menu
4 Choose Schedule then select View/Edit Current.
6 You’ll now see the schedule for the day you selected.
button.
2 Turn the dial to select Heat and push the dial to confirm.
3 Select Schedule and push the dial to confirm.
4 Scroll to Start Over and push the dial to confirm.
5 Follow the on-screen instructions to create your new schedule.
HE AT S CHEDULE : MO N
06:00 08:15 11:00 12:00 16:00 21:30
18 º
18 º
18 º
Press tick to confirm, or press dial to edit.
Hot tip: To edit the schedule for that day just push the dial.
5
6
How to boost your heating for a short time:
1 Press the Heating Boost
button on top of the
thermostat to turn the heating on for one hour.
2 Press the Heating Boost
button again
to increase the length of your boost.
3 Turn the dial to change
the boost temperature
(it’s set to 22°C by default).
4 When the boost finishes,
your heating will go back
to its previous mode.
5 To cancel boost early,
press the Back
button.
Hot water
Hot water features are not shown on combi boilers (without a separate hot
water tank) as they automatically heat water when it’s needed.
How to turn your
hot water on or off:
1 Wake up your thermostat by
pushing the dial.
MO N 19: 25
ON
MANUAL
2 Once the screen turns on
press the Menu
button.
3 Turn the dial to select
Hot Water, then push the dial.
ON
18˚
ACTUAL
4 Choose either Always On
or Always Off.
5 Press the Confirm
button.
Hot tip: If you only want hot water at certain times of day, using Schedule
mode could be more energy efficient.
7
8
Setting up a new hot water schedule:
Your thermostat will walk you through setting up your hot water schedule
step by step.
To do this:
1 Push the dial to wake up the thermostat.
2 Once the screen turns on press the Menu
button.
3 Turn the dial to select Hot Water, then push the dial.
1 Wake up your thermostat by pushing the dial and
press the Menu
How to view your hot water schedule:
button.
2 Turn the dial to select Hot Water and push the dial to confirm.
4 Choose Schedule then select View/Edit Current.
5 Turn the dial left or right to browse through the days and to select a day.
6 You’ll now see the schedule for the day you selected.
3 Select Schedule and push the dial to confirm.
4 Scroll to Start Over and push the dial to confirm.
5 Follow the on screen instructions to create your new schedule.
HO T WAT E R S CHEDULE : MO N
06:00 08:15 11:00 12:00 16:00 21:30
Of f
On
Of f
On
Off
On
Of f
Press tick to confirm, or press dial to edit.
Hot tip: To edit the schedule for that day push the dial to start editing.
9
10
How to boost your hot water for a short time:
1 Press the Hot Water Boost
button on top of the thermostat
to turn the hot water on for one hour.
2 Press the Hot Water Boost
•Select Holiday mode and set the dates you’ll be away by going to Menu
then Holiday.
3 When your boost finishes, your
•Set a Child Lock so little hands can’t change the temperature, find it under
Menu then Settings.
button again
to increase the length of your boost.
system will go back to your
previous mode.
4 To cancel your boost early,
press the Back
11
More things you can do
with your thermostat
button.
•Increase the temperature of your Frost Protection setting. By default this
is set so your home won’t drop below 7°C and will activate whatever mode
your heating is in. Find it under Menu then Settings.
12
Troubleshooting
No signal
A red battery symbol means your batteries need to be replaced
with four new AA batteries.
MO N 19: 25
How to change the batteries:
1 Press the tab on the base of your thermostat.
22˚
NO SIGNAL
2 Lift your thermostat off the hooks that hold it against the wall
(and turn it over to access the batteries).
3 Simply pop the batteries out and put the new ones in.
If this message shows on your thermostat –
it means your thermostat and receiver aren’t
communicating.
For more information visit
hivehome.com/help or get in touch with the
Hive team at help@hivehome.com
MO N 19:25
4 Re-hook the top of your thermostat and then press the bottom
until it clicks to secure it to the wall.
No signal
22˚
Press tab to open
13
Hot tip: When there is no signal the ‘Status’ button on the receiver will
be red. You can manually switch your heating and hot water on and off.
To do this press the central heating and hot water buttons on the
receiver (usually fitted beside your boiler).
14
Icons you might see
on your thermostat
1.
Current day and time
2.
Hot water mode
3.
Heating mode
4.
Heating on
5.
Actual temperature
6.
Confirm button
7.
Menu button
8.
Back button
9.
Target temperature
2
MON 19:25
ON
ACTUAL
1
MON 19:25
11
3:17:12
3
ON
MANUAL
ON
16˚
10
TARGET
ACTUAL
4
5
9
TARGET
10. Frost Protection
11.
15
Boost time remaining
3:17:12
8
7
6
16
Customise your thermostat cover
To change your thermostat frame:
Different coloured frames are available for your Hive thermostat,
discover more at hivehome.com
1 Press the tab on the base of your thermostat.
2 Lift your thermostat off the hooks.
3 Hold your thermostat in one hand with the dial in your palm.
4 With your other hand, squeeze together the two tabs shown on the
back of your thermostat.
5 Slide the frame off the back of your thermostat.
6 Your new frame will slide on from the back of your thermostat and
click into place.
Tabs
17
18
Hive Multizone
Multizone lets you control up to three existing plumbed heating zones
in your home. Each zone needs its own Hive thermostat and receiver.
If you are a Hive Multizone customer, to change the zone name
of each thermostat log in to the Hive app or online dashboard and
select Manage Devices.
Troubleshoot
If you need to identify which of your Hive thermostats belongs to which
receiver follow these steps:
1 Turn the heating off in every zone using the app or thermostats.
2 When you look at the receivers the ‘central heating’ light should
be switched off on each receiver.
MON 19:25
3 Turn the heating on in one zone only by using the app or
MANUAL
thermostat. The ‘central heating’ light on one receiver will turn
green showing that this thermostat is paired to this receiver.
4 Repeat these steps to identify which receivers your other
ON
16˚
ZONE 1
thermostats are paired with.
Zone name
For more information on Hive Multizone, please visit hivehome.com/help
19
20
Can we help?
To get the most from Hive, view our handy how-to-use videos along with
hints and tips at hivehome.com/help or email us at hive@bordgais.ie
The Hive family is growing
Soon you’ll be able to control lights, plugs, window or door sensors and
motion sensors all from the Hive app.
Discover more at hivehome.com
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked
with a crossed out wheeled bin should not be placed into
your household rubbish bin. Instead, when they are unable
to be re-used, they should be recycled. Your local authority
will be able to advise you on the location of the nearest
recycling centre that is authorised to accept this type of
waste. Please recycle responsibly.
21
22
Your thermostat is a Class I temperature control and contributes 1% to seasonal space
heating energy efficiency.
Hive is the trading name of Centrica Connected Home Limited. Registered in England and Wales
(No. 5782908). Registered office: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD.
IRE/MZ/UG/0217
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising