dishwasher - Trail Appliances
ENGLISH
ESPAÑOL
FRANÇAIS
OWNER’S MANUAL
DISHWASHER
Please read this owner's manual thoroughly before
operating and keep it handy for reference at all times.
LDF8874ST
LDF8764ST
LDF7774ST/WW/BB
P/No. : MFL62077193
www.lg.com
2
TABLE OF CONTENTS
TABLE OF CONTENTS
3
IMPORTANT SAFETY INFORMATION
3 Basic Safety Precautions
27
TROUBLESHOOTING
2 7 Before Calling for Service
4 Electrical Safety
5 Before Using the Dishwasher
5Specifications
6
PARTS AND FEATURES
6Features
7Parts
29
SMART DIAGNOSIS™ SYSTEM
2 9
SMART DIAGNOSIS™ SYSTEM
30
WARRANTY
3 0 Product Registration Information
8 Control Panel(steam models)
10 Control Panel(non-steam model)
11 Cycle Option Chart
11 Icons
12 Cycle Selection Chart
13
OPERATING INSTRUCTIONS
1 3 Quick Start
THANK YOU
1 4 Loading the Lower Rack
1 5 Folding Down the Lower Tines
Congratulations on your purchase and
1 6 Loading the Silverware Basket
1 7 Loading the Upper Rack
1 7 Folding Down the Upper Tines
1 8 Height Adjustable Upper Rack
1 9 Loading the Cutlery Rack (on some models)
1 9 Height Adjustable Tray (on some models)
2 0 Adding Detergent to the Dispenser
2 1 Adding Rinse Aid to the Dispenser
22
CARE AND CLEANING
2 2
Cleaning the Filters
2 3 Cleaning Metallic Parts
2 3 Cleaning the Lower Spray Arm
2 3 Cleaning the Upper Spray Arm
2 4 Cleaning the Top Spray Arm
2 4 Seasonal Maintenance and Storage
25
FAQS
welcome to the LG family. Your new LG
Dishwasher combines quiet, efficient
operation with advanced cleaning
technology. By following the operating
and care instructions in this manual,
your dishwasher will provide you with
many years of reliable service.
IMPORTANT SAFETY INFORMATION
3
READ ALL INSTRUCTIONS BEFORE USE
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage or serious bodily
harm, even death.
The safety alert symbol will be followed by either the word “WARNING” or “CAUTION” then an important safety message. These
words mean:
WARNING
Indicates the possibility of serious bodily harm or death.
CAUTION
Indicates the possibility of injury or damage to property.
BASIC SAFETY PRECAUTIONS
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following:
This manual contains very important information regarding the installation, use, and maintenance of your dishwasher. The manufacturer
cannot be responsible for injuries or damage caused by failure to follow these safety and caution instructions.
• Read all instructions carefully before using the dishwasher.
• Use the dishwasher only for its intended function.
• Only use detergents or rinse agents recommended for use in a
dishwasher. Keep all dishwasher detergents and additives out
of the reach of children.
• This appliance is not intended for use by young children.
• When loading items to be washed:
1) Load sharp items so that they are not likely to damage the
door seal.
2) Load sharp knives with the handles up to reduce the risk of
injury when reaching into the dishwasher.
yy Do not wash plastic items in the dishwasher unless they are
labeled “dishwasher safe” or the equivalent. For plastic items
that are not so labeled, check the manufacturer’s recommendations.
• Do not operate the dishwasher unless all enclosure panels are
properly in place.
• Do not tamper with the controls.
• Do not abuse, sit on, or stand on the door or dish racks of the
dishwasher.
• To reduce the risk of injury, do not allow children to play in or
around the dishwasher.
• Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system
has not been used for such a period of time, turn on all hot
water faucets and let the water flow for several minutes. This
will release any accumulated hydrogen gas. Since hydrogen
gas is flammable, do not smoke or use an open flame during
this time.
• Remove the door to the wash compartment when disposing of
an old dishwasher.
• The installer must ensure that the dishwasher is completely enclosed at the time of installation.
• WARNING : This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
ENGLISH
IMPORTANT SAFETY IMFORMATION
4
IMPORTANT SAFETY INFORMATION
BASIC SAFETY PRECAUTIONS
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions,
including the following:
For a permanently connected dishwasher:
Tip Hazard
This appliance must be connected to a grounded metal, permanent wiring system, or an equipment grounding conductor must
be run with the circuit conductors and connected to the equipment grounding terminal or lead on the appliance. Consult with a
qualified electrician.
Do not put excessive downward force on the open dishwasher
door prior to installation, as this could cause damage to the unit
or cause it to tip over. Do not use the dishwasher before installation has been completed in accordance with the Installation Instructions.
ELECTRICAL SAFETY
WARNING
Electrical Shock Hazard
Failure to follow these instructions can result in death, fire, or electrical shock.
• The dishwasher MUST be grounded. Connect the ground wire to the green ground connector in the terminal box.
• Do not use an extension cord with this appliance.
• The dishwasher is designed to be used with standard household current (120 Volts AC, 60Hz.). Before connecting the dishwasher, ensure
that the outlet or cable is properly grounded and polarized by circuit breakers or fuses. Failure to provide adequate grounding of this
appliance may cause electrical shock or malfunction of the appliance. Consult with a qualified electrician.
• Do not install or store the dishwasher where it will be exposed to weather conditions. Failure to observe this precaution may result in
electrical shock, fire, malfunction, and/or deformation of the dishwasher.
• Do not damage or place heavy items on the power cord of the appliance. Do not use the dishwasher if it has a damaged power cord.
Power cord damage may cause fire and electrical shock. Consult with a qualified electrician.
• Do not grasp the power cord or touch the dishwasher controls with wet hands. Do not use the dishwasher if it has a damaged power
cord or plug, and do not plug the dishwasher into a damaged outlet. Failure to observe these instructions may result in electrical shock.
• Disassembly or repair must be performed by experienced service persons. Improper disassembly or repair could lead to product failure
or electrical shock.
IMPORTANT SAFETY INFORMATION
5
BEFORE USING THE DISHWASHER
When loading the dishwasher, observe the following general
guidelines:
Water supply temperature should be a minimum of 120 °F (49 °C)
for better washing and reasonable cycle time.
1. Place items with deep dish bottoms at an angle to help water
run off and speed the drying process.
For this reason, use the hot water supply only. It is also important
that the dishwasher is loaded according to instructions for effective cleaning. When loading the dishwasher, make sure that insoluble items such as bones, toothpicks, and pieces of paper have
been removed.
2. Remove solid, burned-on scraps from dishes prior to loading
in the dishwasher.
3. Only load items that are dishwasher-safe.
NOTE
Do not load utensils that are not heat-resistant, have
decorative metal trim, etc.
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
• Power Supply: 120 V, 60 Hz AC only, minimum 15 A circuit breaker
• Water Pressure: 20–120 psi (140–830 kPa)
• Size (WxDxH): 23 3/4" x 24 5/8"x 33 1/2" (603 mm x 625 mm x 851 mm)
• Inlet Water Temperature: 120 °F (49 °C) minimum
• Product Weight : - LDF8874 : 100.5 lbs.(45.6 kg)
- LDF8764 : 92.1 lbs.(41.8 kg)
- LDF7774 : 96.6 lbs.(43.8 kg)
The appearance and specifications are subject to change without notice.
ENGLISH
Before using the dishwasher, please read the Important Safety
Instructions.
6
PARTS AND FEATURES
PARTS AND FEATURES
FEATURES
LARGE CAPACITY
STEAM WASHING (not available on all models)
LG dishwashers allow
you to load very large
items in both the upper
and lower racks. The
tall tub provides extra
overall capacity and the
clearance to accommodate large dishes. Extra
large items (max. 14 in.)
may be loaded in the
lower rack by raising the
upper rack.
Steam technology provides better cleaning
performance than regular wash systems. Steam
is the most energy efficient gentle care for
your finest china and
stemware.
VARIABLE SPRAY SYSTEM
Because the water spray
alternates between the
upper and lower racks,
all of the power from
the motor is directed
to one rack at a time.
This concentrates all the
cleaning power of the
motor on each rack in
turn.
HYBRID DRYING SYSTEM
This system effectively
dries dishes without the
use of a heating element
that would increase energy consumption.
LIGHT TOUCH BUTTONS
The light touch buttons
on the control panel
make selections easy
and convenient.
PARTS AND FEATURES
7
PARTS
ENGLISH
1. CONTROL PANEL
2. DOOR HANDLE
Mesh filter
3. FRONT COVER
4. LOWER COVER
Outer filter
5. LEVELING FEET
Stainless
Steel Filter
6. FRONT DISPLAY (SIGNALIGHT™)
7. BASE
SignaLight (front display)
8. TOP SPRAY ARM
9. UPPER SPRAY ARM
When a cycle is running, the SignaLight will illuminate for the
active stage.
10. STEAM NOZZLE (on steam models)
• Model with 4 LEDs : WASH – RINSE – DRY – CLEAN
11. LOWER SPRAY ARM
• Models with 2 LEDs : OPERATING - CLEAN
12.DETERGENT AND RINSE AID DISPENSER
• Models with 1 LED : OPERATING (Flickering) / CLEAN
(Lighting)
13. DRYING VENT COVER
Once the cycle is complete, the CLEAN light will illuminate for
four minutes.
To keep the CLEAN light on until the door is open, turn the
power on, and then press and hold the Extra dry and Half load
buttons on the control panel simultaneously until Off or On
appears in the display. The dishwasher will remember this setting until manually changed.
14. CUTLERY RACK (some models)
15. UPPER RACK
16. SILVERWARE BASKET
17. LOWER RACK
18.TOP DISPLAY
19. POWER BUTTON
20. FILTRATION SYSTEM
8
PARTS AND FEATURES
<ZI][M:MNZM[P;\MIUၦხ࿨ཅ૬໏ᅰ
CONTROL
PANEL (steam models)
Steam Models (LDF8874, LDF8764)
Cycles
TO CANCEL A CYCLE
To cancel a cycle, open the door and then press and hold the
Delicate and Dual Control Buttons together for approximately three seconds. The drain pump will activate and the cycle
Auto
will cancel. The display will show “dr” and the dishwasher will
This cycle senses the load size, soil amount and soil toughdrain the water. After the dishwasher is drained, the power
<ZI][M:MNZM[P6WV[\MIUၦხ࿨ཅ૬໏ᅰ
ness. This cycle is optimized to achieve the best cleaning.
will turn off.
If the power is turned on and no cycle has been selected, the
Heavy
dishwasher will power off within four minutes.
This cycle is for heavily and hard soiled dishes. Heavy defaults
to the highest spray intensity and uses the power of steam to
wash heavily soiled dishes.
(Refer to the control panel on the next page)
Select your desired cycle.
Cycle Options
Delicate
This cycle adds the gentle power of steam to boost the cleaning power of the delicate cycle. The cycle is intended for effectively cleaning delicate items such as fine china and stemware.
Dual Control
This cycle washes the upper and lower racks at different spray
intensities. The default setting for this cycle washes the lower rack with strong spray intensity and the upper rack with
soft spray intensity. This provides optimum cleaning performance for mixed loads, including fine china and stemware. If
other combinations are desired, use the steps listed below to
change the intensities or to use the Half Load feature.
Press the desired cycle and then select the options for that
cycle.
Extra Dry
Select the Extra Dry option for better drying performance.
This option adds 60 minutes of extra drying time to the cycle.
The Extra Dry button will illuminate when the option has
been selected.
Rinse
Repeated pressing of the Rinse button will select the desired
Rinse option. The Sanitary, Extra Rinse, or Sanitary and Extra
Rinse lights will show in the bottom left portion of the display.
How To Use Dual Control:
Sanitary (
1. Select Dual Control.
2. Press the Spray button to toggle between Soft, Medium
and Strong for the upper spray arm.
This high-temperature rinse sanitizes dishes and glassware in
accordance with NSF/ANSI Standard 184 for residential dishwashers. Certified dishwashers are not intended for licensed
food establishments.
3. After making your selection for the upper spray arm, press
the Half Load button.
Extra Rinse ( R+ )
4. Press the Spray button to toggle between Soft, Medium
and Strong for the lower spray arm.
5. Close the door to start the cycle.
Normal
This cycle is for normally soiled, everyday loads.
Quick & Dry
This is a shortened cycle that is intended for washing and drying recently used dishes or lightly soiled loads. During this
cycle, both spray arms will run at the same time.
CHIME ON/OFF
To enable or disable the chime, first, turn on the dishwasher.
Press and hold the Delicate and Quick&Dry Buttons simultaneously for approximately three seconds.
)
The Extra Rinse symbol indicates that an extra rinse has been
added to the cycle. An extra rinse can help reduce hard water
spotting on dishes. To add an extra rinse, press the Rinse button repeatedly until the Extra Rinse symbol appears in the
display.
Rinse Only (LDF****)
This cycle is a quick rinse for dishes that will not be washed
immediately. This cycle will rinse dishes that have excess soil
to soften dried on residue. Rinsing the dishes will help prevent odors in the dishwasher. No detergent should be used.
To select the Rinse Only cycle, turn the dishwasher on, and
press the Rinse button once without pressing any other cycle
buttons. The Rinse Only cycle is not available with any other
cycles.
PARTS AND FEATURES
9
CONTROL PANEL
ENGLISH
Display varies by model (LDF8874, LDF8764)
Display varies by model (LDF7774)
Spray (INTENSITY)
First, select the desired cycle. Press the Spray button repeatedly until the desired spray intensity is selected.
Soft (
), Medium (
), Strong (
)
Half Load
For small loads, you may use just the upper or lower rack to
save energy. Each press of the Half Load button cycles between upper rack only and lower rack only.
Delay Start
The Delay Start feature allows you to delay the start of a selected cycle. Each time the Delay Start button is pressed, the
delay time will increase an hour. The delay start time can be
set from 1 to 19 hours, in one-hour increments.
High Temp ON/OFF
Raises the main wash temperature to improve cleaning.
Press and hold the Extra Dry and Rinse buttons simultaneously for approximately three seconds.
Child Lock
The Child Lock feature helps prevent your settings from being changed during a cycle. Selecting this feature locks all
of the buttons, except for the POWER button, on the control
panel. This feature does not lock the door.
To activate the Child Lock:
1. Open the dishwasher door.
2. Press the POWER button.
3. Select the cycle (and desired options).
4. Press and hold the Rinse and Spray buttons for three seconds. The Child Lock indicator will illuminate in the display
once the Child Lock is activated.
5. Close the door to begin the cycle.
Digital Display
The Digital Display on the control panel shows the ESTIMATED cycle time. When the dishwasher is powered up, the display will be blank. When the cycle and options are selected,
the display will show the total estimated time to complete
those selections. During operation, the display shows the remaining estimated operating time.
NOTE
• The estimated time shown in the display does not include delay times for heating water, etc.
• If Delay Start is selected, the display shows the delay
time in hours.
• Time may vary depending on the soil level of your load.
Energy Saving
The Energy Saving option saves energy by using less water.
This option should only be used with light to medium soiled
dishes.
NOTE
The RINSE AID symbol
needs to be refilled.
indicates that the rinse aid
POWER
• Press the POWER button to turn on the control panel. If no
cycle is selected within four minutes, the dishwasher will
power off.
• After the cycle is complete, the power automatically turns
off for purposes of safety and economy.
• If there is a power surge, power outage, or disruption of
any kind, the PF indicator will display and power will be automatically turned off for safety. The cycle will need to be
restarted.
Smart Diagnosis
Should you experience any problems with your dishwasher,
it has the capability of transmitting data to your Smart Phone
using the LG Smart Laundry & DW Application or via your
telephone to the LG call center.
WARNING
Steam can cause burns. Use caution in the area of the steam nozzle, on the left side of the dishwasher, if the door is opened during
the steam portion of a cycle. Contact with the steam or the steam
nozzle can cause burns.
10
PARTS AND FEATURES
<ZI][M:MNZM[P6WV[\MIUၦხ࿨ཅ૬໏ᅰ
CONTROL
PANEL (non-steam model)
Display varies by model (LDF7774)
Cycles
Normal
Select your desired cycle.
This cycle is for normally soiled, everyday loads.
Auto
Quick & Dry
This cycle senses the load size, soil amount and soil toughness. This cycle is optimized to achieve the best cleaning.
This is a shortened cycle that is intended for washing and drying recently used dishes or lightly soiled loads. During this
cycle, both spray arms will run at the same time.
Heavy
This cycle is for heavily and hard soiled dishes.
Delicate
The cycle is intended for effectively cleaning delicate items
such as fine china and stemware.
Dual Control
This cycle washes the upper and lower racks at different spray
intensities. The default setting for this cycle washes the lower rack with strong spray intensity and the upper rack with
soft spray intensity. This provides optimum cleaning performance for mixed loads, including fine china and stemware. If
other combinations are desired, use the steps listed below to
change the intensities or to use the Half Load feature.
How To Use Dual Control:
1. Select Dual Control.
2. Press the Spray button to toggle between Soft, Medium
and Strong for the upper spray arm.
3. After making your selection for the upper spray arm, press
the Half Load button.
4. Press the Spray button to toggle between Soft, Medium
and Strong for the lower spray arm.
5. Close the door to start the cycle.
CHIME ON/OFF
To enable or disable the chime, first, turn on the dishwasher.
Press and hold the Delicate and Quick&Dry Buttons simultaneously for approximately three seconds.
TO CANCEL A CYCLE
To cancel a cycle, open the door and then press and hold the
Delicate and Dual Control Buttons together for approximately three seconds. The drain pump will activate and the cycle
will cancel. The display will show “dr” and the dishwasher will
drain the water. After the dishwasher is drained, the power
will turn off.
If the power is turned on and no cycle has been selected, the
dishwasher will power off within four minutes.
PARTS AND FEATURES
11
CYCLE OPTION CHART
Cycle
Auto
Available
Spray Level Extra Dry Sanitary
Rinse Extra Rinse
(default bold)
Soft
Medium
Strong
Heavy
Strong
Delicate
Soft
Medium
Dual
Control
Normal
Quick & Dry
Rinse Only
Sanitary/
Extra Rinse
Half Load
Delay Start
Energy
Saving
Soft
(upper arm)
Medium
Strong
(lower arm)
Soft
Medium
Strong
Strong
Medium
Strong
ICONS
Steam Cycle (steam models)
Extra Rinse
Low Rinse Aid Indicator
Energy Saving Cycle
Cycle Time Indicator
Sanitary Rinse
Upper Spray Arm
Low, Medium, High Spray, Intensity
Child Lock
Lower Spray Arm
High
Temp
ENGLISH
The cycle guide below shows the available options for each cycle.
12
PARTS AND FEATURES
CYCLE SELECTION CHART
The cycle guide below shows the default settings for each cycle.
Cycle
Wash
Pre 1
Pre 2
Pre 3
Main
Wash
Rinse
Rinse 1
Rinse2
Heated
Rinse
Dry
*Water Usage
122 0F
149~158 0F
Auto
50 0C
65~70 0C
Heavy
140 0F
60 0C
158 0F
70 0C
6.1 gal.
Delicate
122 0F
50 0C
154 0F
68 0C
4.6 gal.
Dual
154 0F
68 0C
158 0F
70 0C
4.6 gal.
Normal
86–122 0F
30–50 0C
149–158 0F
65–70 0C
1.7–6.4 gal.
Quick
122 0F
50 0C
162 0F
72 0C
7.6 gal.
Control
& Dry
6.1 gal.
23 L
23.0 L
17.5 L
17.5 L
6.5–20.5 L
29 L
Rinse
1.0 gal.
Only
4L
* Actual water consumption will vary depending on soil level and water hardness.
** Actual cycle times may vary depending on soil level, water temperature and water hardness
**Cycle
Time
Spray Intensity
135 Min.
Medium
166 Min.
Strong
141 Min.
Soft
147 Min.
U: Strong
L: Soft
110~139
Min.
Medium
79 Min.
Strong
22 Min.
Medium
OPERATING INSTRUCTIONS
13
OPERATING INSTRUCTIONS
ENGLISH
QUICK START
1. LOAD THE DISHES
Scrape the dishes free of excess food, bones, and any other
hard, non-soluble residue. Pull each rack out and load the
dishes as described in this manual.
CAUTION
Empty the lower rack first and then the upper rack. This will avoid
water dripping from the upper rack onto dishes in the lower rack.
2. MEASURE THE DETERGENT
Using the guidelines in this manual, fill the detergent cup
with the recommended amount of detergent and close the
lid. If a prewash is desired, the recess on top of the lid should
also be filled with detergent.
3. TURN ON THE DISHWASHER
To turn on the display panel, press the POWER button.
4. CHECK THE RINSE AID
The Rinse Aid indicator light will illuminate if the level of rinse
aid in the dishwasher is low. Add rinse aid if the level is low to
maintain the effectiveness of the dry cycle.
5. SELECT THE CYCLE AND OPTIONS
Select the cycle and options that best fit the load by referring
to the Cycle Selection Chart. The display will show the estimated time for the cycle and options selected.
6. CLOSE THE DOOR
The dishwasher will start automatically, after a slight delay,
when the door is closed and latched. During the cycle, the
display will indicate the estimated time remaining for the
cycle and options selected. If the door is opened during the
cycle, the dishwasher will stop. When the door is closed, the
cycle will resume from the point where it was stopped.
7. END OF CYCLE
When the cycle is complete, a chime will sound and the display will show “END.” After a short time, the display and controls will shut off for safety and energy conservation.
WARNING
In general, it is not advisable to open the door while the dishwasher is in operation. If the door is opened, a safety device stops
the dishwasher. Care should be taken when opening the door immediately following the cycle, as steam may escape.
AUTO-OFF
The dishwasher will automatically turn off if a cycle is not selected
or if the door is not closed within four minutes.
14
OPERATING INSTRUCTIONS
LOADING THE LOWER RACK
CAUTION
NON-DISHWASHER SAFE ITEMS
The combination of high water temperature and dishwasher
detergents may damage certain items. LG does not recommend
washing the following items in the dishwasher:
• Hand painted silver or gold leaf dishes
• Wood or bone handled utensils
• Iron or other rust prone utensils
• Plastic items that are not dishwasher safe
When in doubt, check the manufacturers’ recommendations.
The extra tall tub allows loading of dishes, pans, or other utensils
up to 14 inches high.
The lower rack is recommended for dinner plates, soup bowls,
dishes, pots, pans, lids, and grill trays. Plates should be positioned
vertically and facing the center of the rack. Pots, pans, and large
bowls must be turned so that the inside faces downward. The silverware basket may be used in either the lower or upper rack.
SUGGESTED LOADING PATTERN
The lower rack should not be used for small items such as cups,
wine glasses, or small plates. These items should be loaded in the
upper rack.
For models with steam, load heavily soiled or stained dishes in the
front left side of the lower rack with the dirty side facing down.
This is the area that the stream enters the dishwasher. The use of
hot steam maximizes the dishwasher’s cleaning performance.
ADDITIONAL LOADING PATTERN
RACK LOADING TIPS
yy Load plates, soup bowls etc. between the tines.
yy Load cookie sheets, cake pans and other large items on the
sides or back of the rack. Loading these items in the front of
the dishwasher can prevent the water spray from reaching the
detergent dispenser.
yy Make sure that pot handles and other large items do not stop
the rotation of the spray arms.
NOTE
Make sure that large items do not interfere with the
rotation of the spray arms, and do not prevent the
detergent dispenser from opening.
OPERATING INSTRUCTIONS
15
FOLDING DOWN THE LOWER TINES
Rear
Front
LOADING DISHES & POTS
DIFFICULT TO REMOVE FOOD ON
DISHES (steam models)
Load items with difficult to remove or baked-on food near the
steam spray arms, towards the left side of the lower rack, facing
down. The dishes will benefit from the direct steam spray and the
lower spray arm wash action.
LOADING POTS & BOWLS
ENGLISH
The tines are adjustable to fit dishes of various sizes.
16
OPERATING INSTRUCTIONS
LOADING THE SILVERWARE BASKET
The silverware basket has separators to avoid scratching and tarnishing of delicate silverware. The basket can be separated into
three separate baskets that can be used individually in both the
upper and lower racks. Unlock the tabs above the left and right
sides to separate.
WARNING
Be careful when loading and unloading sharp items. Load sharp
knives with the handles up to reduce the risk of personal injury.
SILVERWARE LOADING TIPS:
yy For best cleaning results, use the top separators in the basket
when loading silverware. The separators will prevent nesting
of silverware.
yy Load sharp items, such as knives, pointing down.
yy When unloading the dishwasher, it is best to start with the silverware basket. Doing so will prevent water droplets from falling on your silverware from the upper rack.
2 2 2
5 5 5
3 3 4
4 4 4
2 2 2 2
5 3 3 S
2
S
4 4 4 4 4
4 4 4 4 4
①
2 2 2 2 2 2 5 5
3 3 3 3 3 3 3 3
②
③
④
⑤
5 5 5 5 5 5 5 5
S S S S S S S S
1 1 1 1 1 1 3 3
1 1 1 1 1 1 1 1
OPERATING INSTRUCTIONS
17
LOADING THE UPPER RACK
SUGGESTED LOADING PATTERN
UPPER RACK LOADING TIPS:
yy Place cups and glasses in the rows between the rack tines. Placing them over the rack tines can lead to breakage and water
spots.
yy To avoid chipping, do not let stem ware touch other items.
yy Place items so that the open end faces down for cleaning and
drying.
yy Do not stack items on top of each other.
FOLDING DOWN THE UPPER TINES
Pull up the tine
Rotate the tine
The tines can be adjusted up or down. The right side tines have
handles for wider or small dishes.
NOTE
When loading larger items in the upper rack, such
as wine glasses or taller cups, it may be necessary to
remove the cutlery rack.
ADDITIONAL LOADING PATTERN
ENGLISH
Use the upper rack for small or delicate items such as small plates,
cups, saucers, glasses, and dishwasher-safe plastic items. Cups,
glasses, and bowls must be positioned upside down. Extra cups
or cooking utensils can be laid on the fold down cup racks, which
may also provide support for long stemmed glasses. Make sure
items do not interfere with the rotation of the spray arms above
and below the upper rack.
18
OPERATING INSTRUCTIONS
HEIGHT ADJUSTABLE UPPER RACK
NOTE
The upper rack adjusts up and down. Adjust the upper rack up to
allow tall and oversized items of up to 14 inches high in the lower rack. Adjust the upper rack down to allow placement of large
dishes of up to 12 inches high in the upper rack. The upper rack
comes in the upper position.
1
To lower the rack:
Hold the rack at the center of each side to support its
weight. Then, lift the lever on each side to release the rack
and lower it to the lower position.
After adjusting, make sure that dishes in the upper
and lower racks do not interfere with the rotation
of the spray arm. Do not adjust the rack while it is
loaded with dishes.
2
To raise the rack:
Simply lift the rack at the center of each side (see illustration) until the rack locks into place in the upper position.
It is not necessary to lift the lock levers to raise the rack
1
OPERATING INSTRUCTIONS
HEIGHT ADJUSTABLE TRAY
(on some model)
Each side tray can be adjusted independently to a high or low
position to accommodate different sizes of utensils or cutlery. Remove dishes before adjusting the tray.
The cutlery rack is best suited for washing flatware and most cooking or serving utensils. The separators on the cutlery racks help keep
flatware separated to avoid damage and improve cleaning. The rack
can also accommodate small prep bowls and lids. Using the rack allows you to remove the silverware baskets from the lower racks.
NOTE: For best cleaning performance, place flatware in the silverware baskets. Heavily soiled utensils or items with baked on foods
should be placed in the middle rack or spoon basket for best performance.
Each tray is adjusted by lifting it out and rotating it front to back.
④
Removing the Cutlery Rack
③
⑤
④
①
③
②
② ⑤
①
The entire cutlery rack can be removed if more space is needed on
the upper rack for larger items.
NOTE
Always remove the cutlery from the rack before removing
the rack.
Sample 10-place setting.
Right
Wrong
If the handles of your flatware
are too thick, then reverse the
pieces so that the handles face
the other direction, as shown
in the bottom figure.
Alternate
Pull the rack out to the end of the rails. Then, lift the front of the
rack so that the rollers clear the stop on the end of the rail. The
rack can now be slid forward and removed from the rails.
WARNING
Be careful when loading and unloading sharp edged items. Load
sharp knives with the blade down to reduce the risk of injury.
ENGLISH
LOADING THE CUTLERY RACK
(on some model)
19
20 OPERATING INSTRUCTIONS
ADDING DETERGENT TO THE DISPENSER
• Only use detergent intended for automatic dishwashers.
• Detergent must be put into the detergent compartment before starting any cycle, except the Rinse Only cycle.
NOTE
DO NOT add detergent when the Rinse Only cycle is
selected.
• Use less detergent if the dishes are only lightly soiled. Using excess detergent can leave a film on dishes and in the dishwasher
resulting in poor wash performance.
• The amount of detergent needed depends on the cycle, load
size, and soil level of dishes.
Pre wash
Compartment
NOTE
Remove the label on the dispenser prior to running
the dishwasher.
Place proper detergent
into this compartment
Push button to open
3
If a prewash is desired, fill the recessed prewash compartment area in the lid with detergent.
NOTE
Too much detergent can leave a film on dishes and in the
dishwasher, resulting in poor wash performance.
Do not use detergent tablets for shorter wash cycles. The
tablet may not dissolve completely, causing detergent
residue on dishes and inefficient cleaning.
If the lid is closed, press the lever on the bottom side of
the lid to open the dispenser.
CAUTION
Main wash
Compartment
Place proper detergent
into this compartment
2
Add dish washing detergent to the main wash compartment until the level is between the lines marked 20 and
30. Fill to the 30 line for hard water or heavily soiled
loads. Fill to the 20 line for soft water or lightly soiled
loads.
Close the lid firmly until it clicks.
DETERGENT INFORMATION
Use only detergent intended for automatic dishwashers. Incorrect
detergent may cause the dishwasher to fill with suds during operation. Excess sudsing may reduce wash performance and may
cause the dishwasher to leak. DO NOT use hand dish washing detergent in this dishwasher.
OPERATING INSTRUCTIONS
21
ADDING RINSE AID TO THE DISPENSER
ENGLISH
The Low Rinse Aid indicator will appear in the display when
more rinse aid is needed.
Only use liquid rinse aid in this dishwasher. The use of rinse aid is
recommended to prevent water droplet spots on dishes and to
enhance the drying performance.
3
Close the lid to lock the dispenser. Rinse aid will be
dispensed automatically during the final rinse cycle.
RINSE AID DISPENSER ADJUSTMENT
1
Push button to open lid.
Rinse-Aid
Indicator
Adjust Lever
(Rinse)
The rinse aid dispenser is set to level 3, which should provide
the best performance under most conditions. Adjust the setting
higher if you have hard water and notice calcium buildup on your
dishes.
2
Add a liquid rinse aid to the maximum fill level. When
filling the rinse aid dispenser, aim the rinse aid at the
arrow. Make sure that the rinse aid is settled in the
dispenser while filling.
If you notice film on your dishes, use a lower setting. Setting the
rinse aid control too low will contribute to spotting and streaking
of dishes and poor drying performance. Setting the control too
high can cause foaming, which will cause poor wash performance.
To adjust the rinse aid dispenser setting, remove the cap and adjust the rinse aid lever to the desired setting. Point the arrow to
the left for a lower setting, right for a higher setting.
REFILLING THE RINSE AID
The regularity of the dispenser needing to be refilled depends on
how often dishes are washed and the rinse aid setting used. If the
rinse aid level is low, the Rinse Aid light on the control panel will
illuminate.
RINSE AID FILLING TIPS:
yy
The Low Rinse Aid indicator will appear in the display
when more rinse aid is needed.
yy Do not overfill the rinse aid dispenser.
yy Clean up any spilled rinse aid to prevent sudsing.
22 CARE & CLEANING
CARE & CLEANING
For best results, it is important to periodically check and care for the spray arms.
WARNING
To prevent injury during care and maintenance/cleaning, wear gloves and/or protective clothing.
CLEANING THE FILTERS
1. Remove the lower rack first.
2. Turn the mesh filter counterclockwise.
Mesh Filter
3. Take out the mesh filter, Stainless Steel Filter and outer filter.
4. Clean them if necessary.
Outer Filter
5. Replace them in the reverse order.
Stainless
Steel Filter
NOTE
•For best wash performance, clean the filter after each
load. If food debris remains in the filter, it may cause
odor.
•Before starting a cycle, make sure that the filter is assembled correctly. If the filter is not assembled correctly,
you may experience poor cleaning results.
•If you have hard water, cleaning this filter at least once
a month is recommended.
All three filters should be cleaned according to the chart recommendations below. Clean the filters using non-abrasive materials
and warm running water. A soft brush may be required to get
hard to remove soil.
CAUTION
• A soft brush may be required when cleaning the Stainless
steel filter.
• Be cautious of sharp edges when handling the Stainless steel
filter.
Recommended filter cleaning chart:
Number of Loads
Per Week
If you wash dishes
before loading
If you do not scrape
If you scrape and rinse If you only scrape
or rinse dishes before
dishes before loading dishes before loading
loading
1-3
Every 6 months
Once a year
Four times a year
Once a month
4-7
Every 6 months
Once a year
Four times a year
Twice a month
(every 15 days)
8-12
Every 6 months
Every 6 months
Every 1.5 months
Every week
13-14
Every 6 months
Every 6 months
Every 1.5 months
Twice a week
CARE & CLEANING 23
CLEANING THE INTERIOR
yy In most cases, the exterior of your dishwasher can be
cleaned with a soft damp cloth or sponge, then dried with
a soft cloth. If your dishwasher has a stainless steel exterior,
a stainless steel cleaner is recommended.
CLEANING THE LOWER SPRAY ARM
yy Make sure that the water jet holes are not blocked by food
particles.
yy When cleaning is necessary, remove the lower spray arm by
pulling up.
yy After cleaning the lower spray arm, replace it by pushing
down until it clips into place. Be sure that the spray arm is
able to turn freely.
CLEANING THE UPPER SPRAY ARM
• Pull the upper rack forward. Make sure that the
water jet holes are not blocked by food particles.
• When cleaning is necessary, remove the upper
spray arm by turning the nut on the bottom of
the spray arm 1/8 turn counterclockwise and
pulling down.
• After cleaning the upper spray arm, press it
up into place. Turn the nut 1/8 turn clockwise to make sure that the nut locks back
into place.
ENGLISH
yy Clean the interior of your dishwasher periodically
with a soft, damp cloth or sponge to remove food
and dirt particles.
yy To remove white spots and odor from inside the dishwasher, run an empty cycle with detergent or run an
empty cycle with one cup of white vinegar in a dishwasher safe glass or bowl placed on the upper rack.
(Vinegar is an acid and with constant use it could
damage your appliance.)
CLEANING THE EXTERIOR
24 CARE & CLEANING
CLEANING THE TOP SPRAY ARM
1
2
Make sure that the water jet holes are not blocked
by food particles. When cleaning is necessary, use
a screwdriver to release the retainer clip from the
bracket that holds the top spray arm assembly to the
tub.
3
After cleaning the top spray arm, replace it. Slide it back
into place and make sure the retainer clip engages.
Pull the spray arm out.
SEASONAL MAINTENANCE AND STORAGE
• If you will be absent for an extended period of time during warmer months, it is recommended that you close the water valve and unplug
the power cord, or turn off the circuit breaker. Clean the filter, tub and dispenser to prevent odors.
• If you will be absent for an extended period of time during colder months, and there is a possibility of freezing temperatures, it is recommended that you winterize the water supply lines and the dishwasher itself. Winterization must be performed by experienced service
personnel.
FAQS 25
FAQs
ENGLISH
COMMON PRODUCT QUESTIONS
Is a rinse aid required to be used?
What is the hybrid drying system?
Rinse aid is strongly recommended to enhance the drying performance of the dishwasher. In order to be more energy efficient, the
hybrid drying system does not utilize a heating element in order
to assist in drying, so a rinse aid plays an integral role in the drying
process. If a rinse aid is not used, water may remain on the dishes
and the tub. Rinse aid will help to ensure that the majority of the
water has been sheeted off of the dishes at the end of the rinse
and that the load is ready for the dry cycle.
The dishwasher does not rely on a heating element for the drying
process; instead, it relies on the heat that is retained by the dishes
and the tub during the wash and rinse cycles to turn the moisture
in the tub into humidity. Warm, moist air in the dishwasher is then
pulled into a condensing duct in the door by a fan. The air then
cools, which causes the humidity to condense. Room temperature air is also drawn into the duct to help the air cool down faster.
When this moisture condenses into a liquid, it is drained out.
What can be done if my dishes have a cloudy, white
film on them after a wash?
The cloudy film is usually caused by minerals in the water reacting with the dishwasher detergent. First, be certain not to use too
much detergent. Refer to the owner’s manual for recommended
detergent amounts by cycle. Add an Extra Rinse to the cycle, or
run a Heavy cycle. LG Dishwashers use less water than traditional
dishwashers, so adding an Extra Rinse will aid in rinsing the film
away. If the water supply is hard, it may be necessary to add a performance booster that addresses the hard water condition.
What is the Sanitary Rinse and how is it activated?
The Sanitary Rinse will increase the heated rinse to approximately
161°F (72°C). The normal heated rinse temperature will vary from
cycle to cycle.
What steps can I take to improve drying results?
Drying performance is directly affected by the amount of heat
that remains in the tub after the heated rinse is performed. If your
dishwasher is far away from your home’s hot water heater, it may
be necessary to run the hot water tap in the sink before starting a
wash cycle, to ensure that cool water is purged from the hot water
lines. This will ensure your dishwasher has a consistent supply of
hot water from start to finish. Using the Sanitary Rinse setting will
also aid in keeping the inner drum temperature and dishes hotter
before drying begins.
LG dishwashers are designed to be used in conjunction with a
rinse aid. Using a rinse aid will maximize the amount of water that
has already been sheeted away from the dishes before the dry
cycle begins. If a rinse aid is used and the performance still needs a
boost, adjust the amount of rinse aid used by the indicator on the
rinse aid cap. 4 is the default setting, but if necessary, set the level
to 5 so more rinse aid will be used.
Allow the dishwasher to completely finish the dry cycle before
opening the door. If the door is opened mid dry cycle, the heat
that is necessary for the hybrid dry system to work will escape. This
will cause all of the dishes inside to remain wet once the cycle finishes.
NOTE
Rinse aid is required to enhance the drying performance. If no rinse aid is used, water may remain on
the dishes and the tub.
Why is there a whistling sound?
It is important to determine how long the noise occurs and when
it happens (what part of the cycle). When water is drawn into the
dishwasher, a whistling noise can be heard. This is normal. If the
water pressure is too high, it will be louder so it may be necessary
to adjust the water valve to lower the pressure if the noise is too
loud.
What is Dual Control?
Dual Control is an option that can be utilized during wash cycles.
This option enables you to fully customize the wash cycle intensity for the upper and lower racks, independently, in the same
load. For example, by selecting a soft spray for the upper rack and
strong spray for the lower rack, you can wash delicate stemware
in the upper rack while washing pots and pans in the lower rack.
What kind of dishes can be placed in the
dishwasher?
Ensure that the dishes you place in the dishwasher are dishwasher
safe. Plastic dishware will not dry as effectively as glass and metal dishware. Plastic items do not retain heat as well as glass and
metal dishware. Plastic cups and dishes may require some hand
drying before being put away at the end of the cycle.
Can I perform a drain only cycle?
The dishwasher does not have a drain only function; however, the
dishwasher will drain on its own for the first 45 seconds of a new
cycle. To drain standing water, select a wash cycle and let it run
for only 45 seconds. Then, turn the unit off and let it reset. Repeat
as necessary.
26 FAQS
How long does the clean indicator stay lit after the
cycle is complete?
The clean light indicator on the dishwasher will stay lit for 4 minutes before turning off. You can, however, program the dishwasher so that the clean light stays on until the dishwasher door opens.
Why does my dishwasher continuously beep if
I open the door during a cycle or right after the
cycle has finished?
This is normal. The dishwasher is letting you know that the interior
temperatures of the unit are hot and to use caution when placing
your hands inside. Once the unit has cooled down, the beeping
will stop.
PRODUCT FEATURES AND
OPERATION
What is the benefit of steam?
Steam allows for thorough cleaning of baked on foods while using less water than other power scrub methods. Steam also allows
for enhanced cleaning performance when cleaning fine china and
stemware items on a delicate cycle. Stream particles are smaller
and more active so their penetrating power is more effective.
Steam also increases the interior temperature of the dishwasher,
which helps in melting oily or waxy substances, like lipstick along
the rim of a glass.
What is Child Lock and how is it activated?
Child Lock is a feature that will prevent the controls from being
changed during the cycle. It does not prevent the door from being opened or the unit from being powered off. To activate or deactivate, press the Spray and Rinse buttons simultaneously for 3
seconds.
Why is “PF” showing up on the display?
PF is not an error code indicating a malfunction. PF indicates that
there was a power failure. This function protects the dishwasher
in the event that the power goes out or the power to the unit is
disrupted. When power is returned and a button is pushed, this
will display for 10 seconds and then go away.
INSTALLATION
What size is the 90° elbow?
The 90° elbow should have a 3/8” NPT on the end that connects
to the dishwasher.
Can I add an extension to the drain hose?
No, an extension cannot be added.
TROUBLESHOOTING
27
BEFORE CALLING FOR SERVICE
Dishwasher will not
operate
Dishwasher operates too
long
Odor
Water remains in tub
after completion of cycle
Spots and filming on
dishes
Possible Causes
Solutions
Door is not completely closed.
Make sure that the door is completely closed and
latched.
Power supply or power cord is not connected.
Connect the power supply or cord properly.
Fuse is blown or circuit breaker tripped.
Replace the fuse or reset the circuit breaker.
Dishwasher is connected to cold water.
Check the water supply connection or water heater setting. (Heating cold water takes longer.)
The previous cycle was stopped before
completion and residual water remains in
the dishwasher.
There is food in the bottom of the unit or in
the filter.
Unwashed dishes are left in the unit for a
long time.
Turn on the power, run the Cancel cycle option to remove the residual water, then run the Quick cycle using
detergent but with the dishwasher empty.
Clean the filter and the interior according to the “Care
and Cleaning” section of the owner’s manual.
Run an empty cycle with detergent, or run an empty
cycle with one cup of white vinegar in a dishwasher safe
glass or bowl placed on the upper rack.
(Vinegar is an acid, and with constant use it could damage your appliance.)
Drain hose is kinked or clogged.
Adjust hose or clear blockage.
Low water temperature.
Water supply should be at least 120°F for best wash
performance.
Wrong amount of detergent used.
Use the recommended amount of detergent.
Overloading.
Do not overload the dishwasher.
Improper loading.
See the Using Your Dishwasher section.
Insufficient water pressure.
Water pressure should be between 20 and 120 psi.
Insufficient detergent.
Add the recommended amount of detergent. See the
Using Your Dishwasher section.
Rinse aid dispenser is empty.
Refill rinse aid dispenser.
Extremely hard water
The best way to eliminate spots on your dishes is to install a whole house water softener in your home. If
a water softener is already installed or you do not plan on installing one, try adding the “Extra Rinse” option as part of the wash cycle to help minimize this condition. To add an extra rinse to the cycle, select the
wash cycle and then press the RINSE button.
NOTE: Selecting “Extra Rinse” will increase cycle times and water usage.
To remove hard water build up in the tub
Remove all dishes, silverware and the silverware holder from the dishwasher. Only the racks should
remain in the tub.
Fill a measuring cup with white vinegar, approximately 14~17 ounces (400~500mL), and place the measuring cup in the lower rack.
Run a Normal cycle and select Extra Rinse
and Sanitary
then close the door.
DO NOT USE DETERGENT
NOTE: Make sure to let the dishwasher complete the entire cycle. This cleaning method should only be
done as needed.
If you have followed this troubleshooting guide and the problem persists, or if the problem you are experiencing is not listed here, please
call LGE Customer Service at 1-800-243-0000(US), 1-888-542-2623(Canada).
ENGLISH
Problem
28 TROUBLESHOOTING
BEFORE CALLING FOR SERVICE
Problem
Possible Causes
Improper cycle selection.
Solutions
Select correct cycle based on soil level and
type of dishware being washed.
Water temperature too low.
Check water supply connection or water
heater setting.
Dish washing detergent was not used.
Use recommended detergent.
Low inlet water pressure.
Water pressure should be between 20 and
120 psi.
Water jet holes on spray arms blocked.
Clean the spray arms.
Improper loading of dishes
Make sure dishes do not block spray arm
rotation or interfere with detergent
dispenser.
Filters are clogged.
Clean filters.
Some level of noise is normal during
operation.
Detergent cover opening.
Drain pump at the beginning of drain
cycle.
The dishwasher is not level.
Adjust leveling feet.
Nozzle arm knocking against dishes.
Reposition the dishes.
Cloudiness on glassware.
Combination of excessive detergent and
soft water.
Use less detergent and use a rinse aid to
minimize the problem.
Black or gray marks on dishes.
Aluminum items rubbing dishes during
cycle.
Reposition the dishes.
Yellow or brown film on inside of surfaces
of dishwasher.
Coffee or tea stains.
Eliminate the stain by using a stain
removal product.
Dishes don’t dry.
Rinse agent dispenser empty.
Check and refill the rinse agent dispenser
if empty.
Lamps do not illuminate.
Power is not connected.
Connect power supply.
Sprays arms do not rotate smoothly.
Holes of spray arms are blocked by food
particles.
Clean the holes of spray arms.
Upper rack is crooked.
Rack is poorly adjusted.
See the Height Adjustable Upper Rack
section.
Dishwasher continuously beeps when
the door is opened, during or right after a
cycle has completed.
The contents of the dishwasher are hot
and care should be used when placing
your hands inside the dishwasher.
Close the door until the dishwasher and
dishes have cooled down. The beeping
will go away if the door is closed or the
interior temperature has been cooled.
Food soil remains on dishes.
Noise
IE Error
Water inlet problem.
Check for a clogged, kinked or frozen
water inlet hose.
Check water supply.
OE Error
Drainage Problem.
Check for a clogged, kinked or frozen drain
hose.
Filters are clogged.
Clean Filters
FE Error
Excessive Water supplied.
E1 or AE Error
Water leakage problem.
HE Error
Heater circuit failure.
TE Error
Thermistor failure or very high inlet water
temperature (over 1940F)
LE Error
Motor Trouble
Please call an Authorized Service Center or
LGE Customer Service at 1-800-243-0000
(US) 1-888-542-2623 (Canada)
If you have followed this troubleshooting guide and the problem persists, or if the problem you are experiencing is not listed here, please
call LGE Customer Service at 1-800-243-0000(US), 1-888-542-2623(Canada).
SMART DIAGNOSIS™ SYSTEM 29
SMART DIAGNOSIS™ SYSTEM
(LDF**** )
Smart Diagnosis Using Your Smart Phone
Smart Diagnosis cannot be activated unless your dishwasher is
turned on by touching the POWER button. If your dishwasher is
unable to turn on, then troubleshooting must be done without
using Smart Diagnosis.
(LDS**** )
Smart Diagnosis Through the Call Center
1. Download the LG Smart Laundry & DW application on your
smart phone.
1. Call the LG call center at: (LG U.S.) 1-800-243-0000
(LG Canada) 1-888-542-2623.
2. Open the LG Smart Laundry & DW application on your smart
phone.
2. When instructed to do so by the call center agent, hold the
mouthpiece of your phone near the hole located on the side
panel. Hold the phone no more than one inch (but not touching) the machine.
3. Press the Smart Diagnosis button on your smart phone.
4. Press the Diagnose button on your smart phone.
5. Press the Dishwasher button on your smart phone.
6. Press the RECORD button on the smart phone and then hold
the mouth piece of the smart phone near the speaker located
on the side panel of the dishwasher. Hold the phone no more
than one inch (but not touching) the machine.
7. Press and hold the Rinse button on the dishwasher display
for three seconds.
NOTE
After three seconds, the display will change from 0:22 to
6 and then start counting down the remaining time.
8. With the phone held in place, press the Smart Diagnosis
button on the phone.
NOTE
Do not touch any other buttons or icons on the display
screen.
9. Keep the phone in place until the tone transmission has finished. This takes about 6 seconds and the display will count
down the time.
10. When the recording is complete, view the diagnosis by pressing the Next button on the phone.
NOTE
Do not touch any other buttons or icons on the display
screen.
3. Press and hold the Rinse button on the display screen for
three seconds.
4. Keep the phone in place until the tone transmission has finished. This takes about 6 seconds and the display will count
down the time.
5. Once the countdown is over and the tones have stopped, resume your conversation with the call center agent, who will
then be able to assist you in using the information transmitted for analysis.
NOTE
Smart Diagnosis is a troubleshooting feature designed to assist, not replace, the traditional method of troubleshooting
pends upon various factors, including, but not limited to, the
reception of the cellular phone being used for transmission,
any external noise that may be present during the transmission, and the acoustics of the room where the machine is lonosis would accurately troubleshoot any given issue.
ENGLISH
Should you experience any problems with your dishwasher, it has
the capability of transmitting data to your Smart Phone using the
LG Smart Laundry & DW Application or via your telephone to the
LG call center.
30 WARRANTY
DISHWASHER LIMITED WARRANTY (USA)
Should your LG Dishwasher prove to be defective in material or workmanship under normal use during the warranty period listed below, effective from the
date of original consumer purchase of the product, LG Electronics will replace the defective part(s). Replacement parts will meet intended fit and function
of the original part. Replacement parts are warranted for the unexpired portion of the original warranty period. This limited warranty is good only to the
original purchaser of the product and effective only when used in the United States of America.
WARRANTY PERIOD
For the Period of:
LG Will Replace:
One year from date of original purchase
Any part of the Dishwasher which fails due to a defect in materials or workmanship. During this full
one-year of original purchase warranty, LGE will also provide, free of charge, all labor and on-site
service to replace the defective part.
Two years from date of original purchase
Any part of the dishwasher (except as listed below) which fails due to a defect in materials or
workmanship.
During this two-year parts warranty, you will be responsible for any labor or on-site service costs.
Five years from date of original purchase
Electronic control board and dishwasher rack which fails due to a defect in materials or workmanship.
During this five-year parts warranty, you will be responsible for any labor or on-site service costs.
Ten years from date of original purchase
Direct Drive motor which fails due to a defect in materials or workmanship.
During this ten-year warranty, you will be responsible for any labor or on-site service costs.
Limited Lifetime
Stainless steel door liner and tub (as long as owned by the original purchaser) which fails due to a
defect in materials or workmanship. During this limited lifetime parts warranty, you will be responsible for any labor or on-site service costs
Replacement units and repair parts may be new or factory remanufactured. Replacement units and repair parts are warranted for the remaining portion
of the original unit’s warranty period
No other warranty is applicable to this product. THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS
REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT
LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states and/or
territories do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above
exclusion or limitation may not apply to you. This warranty gives you, the original purchaser, specific legal rights and you may also have other rights that vary
from state to state or territory to territory.
THIS LIMITED WARRANTY DOES NOT COVER:
1.Service calls to your home for delivery or pick-up, installation, instruction, replacement of house fuses, connection of house wiring or
plumbing, or to correct unauthorized repairs.
2. Failure of product to perform during power failures and interruptions or inadequate electrical service.
3. Damage caused by transportation or handling.
4. Damage caused to the product by accident, vermin, lightning, winds, fire, floods, or acts of God.
5.Damages caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, or inadequate or interrupted water supply.
6. Damages caused by inadequate supply of air.
7.Damages caused by operating the product in a corrosive atmosphere.
8. Repairs when your LG product is used in other than normal, single family household use or contrary to the instructions described in the
product User’s Guide.
9.Damage resulting from accident, alteration, misuse, abuse, or improper installation, repair, or maintenance. Improper repair includes
the use of parts not approved or specified by LG.
10. Normal maintenance as described in the User’s Guide, such as cleaning or replacing filters, cleaning coils, etc.
11.Use of accessories or components that are not compatible with this product.
12.Products with altered or removed serial numbers.
13.Changes in the appearance of the product that do not affect product performance.
14.Increases in utility costs and additional utility expenses.
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.
For complete warranty details and customer assistance, please call or visit our
website:
Call 1-800-243-0000 (24 hours a day, 365 days a year) and select the appropriate option from the menu, or visit our website at http://us.lgservice.com
Or by mail: LG Customer Information Center:
P. O. Box 240007
201 James Record Road
Huntsville, Alabama 35813
ATTN: CIC
Product Registration Information:
Model: _____________________________________________
Serial Number: _______________________________________
Date of Purchase: _____________________________________
Dealer Name:________________________________________
WARRANTY 31
DISHWASHER LIMITED WARRANTY (CANADA)
WARRANTY: Should your LG Dishwasher (“Product”) fail due to a defect in material or workmanship under normal home use during the warranty period
WARRANTY PERIOD: (Note: If the original date of purchase can not be verified, the warranty will begin sixty
(60) days from the date of manufacture)
Extended Component Warranty (Parts Only)
(Consumer will be charged for Labor after One (1) year from the date of purchase)
Dishwasher
Two (2) year from the date One (1) year from the date
of original retail purchase of original retail purchase
Parts
Labor
(internal/functional parts only)
Five (5) year from the date of
original retail purchase
Ten (10) years from the date
of original retail purchase
PCB, Rack, Stainless Steel Door Liner, Tub
DD Motor
ff Replacement products and parts are warranted for the remaining portion of the original warranty period or ninety (90) days, whichever is greater.
ff Replacement products and parts may be new or remanufactured.
ff LG Authorized Service Center warranties their repair work for thirty (30) days.
LG CANADA’S SOLE LIABILITY IS LIMITED TO THE WARRANTY SET OUT ABOVE. EXCEPT AS EXPRESSLY PROVIDED ABOVE, LG CANADA MAKES NO
AND HEREBY DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS RESPECTING THE PRODUCT, WHETHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND NO REPRESENTATIONS SHALL BE BINDING ON LG CANADA. LG CANADA DOES NOT AUTHORIZE ANY PERSON TO CREATE OR ASSUME FOR IT ANY OTHER
WARRANTY OBLIGATION OR LIABILITY IN CONNECTION WITH THE PRODUCT. TO THE EXTENT THAT ANY WARRANTY OR CONDITION IS IMPLIED BY
LAW, IT IS LIMITED TO THE EXPRESS WARRANTY PERIOD ABOVE. LG CANADA, THE MANUFACTURER OR DISTRIBUTOR SHALL NOT BE LIABLE FOR
ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, DIRECT OR INDIRECT DAMAGES, LOSS OF GOODWILL, LOST PROFITS, PUNITIVE OR EXEMPLARY
DAMAGES OR ANY OTHER DAMAGE, WHETHER ARISING DIRECTLY OR INDIRECTLY FROM ANY CONTRACTUAL BREACH, FUNDAMENTAL OR OTHERWISE, OR FROM ANY ACTS OR OMISSIONS, TORT, OR OTHERWISE. This warranty gives you specific legal rights. You may have other rights which may
vary from province to province depending on applicable provincial laws. Any term of this warranty that negates or varies any implied condition or warranty
under provincial law is severable where it conflicts with provincial law without affecting the remainder of this warranty’s terms.
THIS LIMITED WARRANTY DOES NOT COVER:
1.Service trips to deliver, pick up, or install the product; instructing a customer on operation of the product; repair or replacement of fuses
or correction of wiring or plumbing, or correction of unauthorized repairs/installation.
2. Failure of the product to perform during power failures and interruptions or inadequate electrical service.
3. Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply or
inadequate supply of air.
4. Damage resulting from operating the Product in a corrosive atmosphere or contrary to the instructions outlined in the Product owner’s
manual.
5.Damage to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of God.
6. Damage resulting from the misuse, abuse, improper installation, repair, or maintenance of the Product. Improper repair includes use of
parts not approved or specified by LG Canada.
7.Damage or product failure caused by unauthorized modification or alteration, or use for other than its intended purpose, or resulting
from any water leakage due to improper installation.
8. Damage or Product failure caused by incorrect electrical current, voltage, or plumbing codes, commercial or industrial use, or use of
accessories, components, or cleaning products that are not approved by LG Canada.
9.Damage caused by transportation and handling, including scratches, dents, chips, and/or other damage to the finish of your product,
unless such damage results from defects in materials or workmanship and is reported within one (1) week of delivery.
10. Damage or missing items to any display, open box, discounted, or refurbished Product.
11.Products with original serial numbers that have been removed, altered, or cannot be readily determined. Model and Serial numbers,
along with original retail sales receipt, are required for warranty validation.
12.Increases in utility costs and additional utility expenses.
13.Replacement of light bulbs, filters, or any consumable parts.
14.Repairs when your Product is used in other than normal and usual household use (including, without limitation, commercial use, in offices or recreational facilities) or contrary to the instructions outlined in the Product owner’s manual.
15.Costs associated with removal of the Product from your home for repairs.
16.The removal and reinstallation of the Product if it is installed in an inaccessible location or is not installed in accordance with published
installation instructions, including the Product owner’s and installation manuals.
17.Accessories to the Product such as door bins, drawers, handles, shelves, etc.. Also excluded are parts besides those that were originally
included with the Product.
All costs associated with the above excluded circumstances shall be borne by the consumer.
For complete warranty details and customer asWrite your warranty information below:
sistance, please call or visit our website:
Product Registration Information: _____________________________________________
Call 1-888-542-2623 (24 hours a day, 365 days a
Model: ________________________________________________________________________
year) and select the appropriate option from the
Serial Number: ________________________________________________________________
menu, or visit our website at http://www.lg.ca
Date of Purchase: _____________________________________________________________
ENGLISH
set forth below, LG Canada will at its option repair or replace the Product upon receipt of proof of original retail purchase. This warranty is valid only to the
original retail purchaser of the product and applies only to a Product distributed in Canada by LG Canada or an authorized Canadian distributor thereof. The
warranty only applies to Products located and used within Canada.
32
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising