Miele DGC 6800 Operating and Installation Instructions
Miele DGC 6800 is a built-in coffee machine that offers a wide range of features to make your perfect cup of coffee. With its intuitive touch display, you can easily select your desired drink and customize it to your taste. The machine features a built-in grinder with 5 grind settings, ensuring that your coffee is always freshly ground for optimal flavor. Additionally, the machine has an automatic cleaning and descaling program, making maintenance effortless.
Advertisement
Advertisement
Operating and installation instructions
Built-in coffee machine
To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time.
en – AU, NZ M.-Nr. 10 499 940
Packaging material / Disposal of old machine
Disposal of the packing material
The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled.
Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation.
Disposing of your old appliance
Electrical and electronic appliances often contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment.
They are, however, essential for the correct functioning of your appliance.
Therefore, please do not dispose of your old appliance with your household waste.
Please dispose of it at your local community waste collection / recycling centre.
Ensure that your old appliance presents no danger to children while being stored for disposal.
2
Contents
Packaging material / Disposal of old machine .................................................. 2
Switching the coffee machine on and off ......................................................... 28
3
Contents
User profiles: Creating and editing your own drinks ....................................... 44
Changing a drink: Changing the portion sizes, drinks parameters and names .... 44
4
Contents
Removing and cleaning the brew unit by hand ................................................ 68
5
Warning and Safety instructions
This coffee machine conforms to current safety requirements.
Improper use of the appliance can, however, present a risk of both personal injury and material damage.
To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time. They contain important notes on the installation, safety, operation and care of the appliance.
Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions.
Keep the instructions in a safe place and pass them along to any future owner.
6
Warning and Safety instructions
Correct application
This appliance is designed for domestic use and for use in similar environments by guests in hotel or motel rooms, bed & breakfasts and other typical living quarters. This does not include common/ shared facilities or commercial facilities within hotels, motels or bed
& breakfasts.
The coffee machine is not suitable for outdoor use.
The machine is intended only for the preparation of coffee based drinks such as espresso, cappuccino, latte macchiato etc. Any other usage is at the owner's risk.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning its use by a person responsible for their safety, and are able to recognise the dangers of misuse.
7
Warning and Safety instructions
Safety with children
Caution! Danger of burning and scalding on the dispensing spouts.
Children's skin is far more sensitive to high temperatures than that of adults.
Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts.
Install the coffee machine out of reach of children.
Young children must not be allowed to use this appliance.
Older children may only use the coffee machine unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
Children should be supervised when they are near the coffee machine. Do not allow them to play with it or to use the controls.
Cleaning may only be carried out by older children under the supervision of an adult.
Remember that coffee and espresso are not suitable drinks for children.
Risk of suffocation!
Children may be able to wrap themselves in packing material or pull it over their heads with the risk of suffocation. Keep children away from any packing material.
8
Warning and Safety instructions
Technical safety
Repairs and installation work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Installation work and repairs to electrical appliances must only be carried out by a Miele approved service technician.
A damaged appliance is dangerous. Check it for any visible damage. Never install or attempt to use a damaged appliance.
Before connecting the appliance to the mains supply, make sure that the rating on the data plate corresponds to the voltage and frequency of the household supply. This data must correspond in order to avoid the risk of damage to the appliance. Consult a qualified electrician if in any doubt.
The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system. It is most important that this basic safety requirement is present and tested regularly and, where there is any doubt, the household wiring system should be inspected by a qualified electrician.
Reliable and safe operation of the coffee machine can only be guaranteed if it is connected to the mains electrical supply.
Do not connect the machine to the mains electricity supply by a multi-socket adapter or an extension lead. These do not guarantee the safety of the appliance (e.g. danger of overheating).
This appliance must not be installed and operated in mobile installations (e.g. on a ship).
For safety reasons, this appliance may only be used when it has been built in.
If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except in combination with a built-in plate warmer).
9
Warning and Safety instructions
The second electrical connection socket on the back of the machine may only be used for connecting a Miele
EGW 4000-14, -29, EGW 5000-14 plate warming drawer or an
ESW 6x14, ESW 6x29 food warming drawer.
Only use the coffee machine in rooms where the ambient temperature is between +10 °C and +38 °C.
Do not cover or block the ventilation gaps.
This would prevent adequate ventilation. Condensation can damage the coffee machine or the furniture housing unit.
Ensure that there is sufficient ventilation around the coffee machine. Otherwise condensate may form and the appliance or the furniture unit may be damaged. The ventilation cut-out area in the furniture unit and the space underneath the ceiling must amount to at least 200 cm
2
.
If the coffee machine is installed behind a kitchen furniture door, it may only be used with the furniture door open. This will prevent the formation of heat and humidity and subsequent damage to the appliance and/or furniture unit. Do not close the furniture door while the coffee machine is in use. Ensure the coffee machine has cooled down completely before closing the furniture door.
Repairs may only be carried out by a Miele authorised service technician. Repairs by unqualified persons can cause considerable danger to the user.
Before any repair work is carried out, the appliance must be completely disconnected from the electricity supply.
The appliance is only completely isolated from the electricity supply when:
– the mains fuse is disconnected, or
– it is switched off at the circuit breaker, or
10
Warning and Safety instructions
– the mains connection cable is disconnected from the power supply.
Pull the plug, not the cord, to disconnect the appliance from the power supply.
The manufacturer's warranty will be invalidated if the appliance is not repaired by a Miele approved service technician.
Faulty components must only be replaced by genuine Miele
Original spare parts. The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used.
Never open the outer casing of the machine. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults or electric shock.
Use only Miele Original spare parts. If spare parts or accessories from other manufacturers are used, the warranty will be invalidated, and Miele cannot accept liability.
11
Warning and Safety instructions
Correct use
The dispensing spouts present a danger of burning or scalding.
The liquids and steam dispensed are very hot.
Please note:
– Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed.
– Heating surfaces have residual heat after use. Do not touch hot components.
– Hot liquid or steam could spatter from the nozzles. Ensure that the central spout is clean and fitted correctly.
– Water in the drip tray can also be very hot. Take care when emptying it.
Never look directly at the lighting or use optical instruments to look at it.
Please note the following regarding water:
– Fill the water container only with fresh, cold tap water. Hot or warm water or other liquids could damage the coffee machine.
– Change the water every day to prevent a build-up of bacteria.
– Do not use mineral water. Mineral water will cause serious limescale deposits to build up in your machine and damage it.
– Do not use water from reverse osmosis units. The machine could be damaged.
Only fill the bean container with roasted espresso/coffee beans.
Do not fill the bean container with coffee beans which have been treated with additives or with ground coffee.
Do not fill the bean container with any type of liquid.
12
Warning and Safety instructions
Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans. Green coffee beans are very hard and still contain a certain amount of residual moisture.
These can damage the coffee machine grinder as soon as grinding begins.
Do not use coffee beans which have been treated with caramel, sugar or other substances. Sugar will damage the coffee machine.
Only add ground coffee or cleaning tablets to the ground coffee chute.
Do not use any caramelised ready ground coffee. The sugar in the coffee will stick to and block the brew unit of the coffee machine.
The cleaning tablets for degreasing the brew unit will not remove this type of deposit.
Only use milk without additives. Additives in milk usually contain sugar and this will stick to the milk pipework.
If using cow's milk, only use pasteurised milk to prevent a buildup of bacteria in the appliance.
Do not place any alcohol mixtures which are alight underneath the central spout. The flames could ignite plastic components and cause them to melt.
Do not swing from or hang anything on the appliance door when it is open as this could damage the hinges on the coffee machine.
The seal on the central spout connector is lubricated with silicone grease. Try to avoid getting this grease on your clothing when removing and inserting containers or other components.
The machine must not be used for cleaning objects.
13
Warning and Safety instructions
Cleaning and care
It is important to switch off the coffee machine before any cleaning or maintenance.
Clean the coffee machine and the milk flask before using for the first time (see "Cleaning and care").
All parts of the milk system need to be cleaned thoroughly and regularly. Milk contains bacteria which proliferate rapidly with inadequate cleaning.
Do not clean the machine with a steam cleaner or immerse it in water as this will damage the machine. Steam or water could reach the electrical components and cause a short circuit.
Avoid spillage on appliance connectors.
Descale the coffee machine regularly depending on the water hardness level in your area. Descale the machine more frequently in areas with very hard water. Miele cannot be held liable for damage arising from insufficient descaling, the use of incorrect descaling agent or the use of descaling agent which is not of the appropriate concentration.
Degrease the brew unit regularly with Miele cleaning tablets.
Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly.
Used coffee grounds should be disposed of with the organic rubbish or on the compost heap. Do not empty them down the sink, as they could block it.
14
Warning and Safety instructions
The following applies to appliances with stainless steel surfaces:
Do not adhere stickers, adhesive tape or any other adhesive materials to stainless steel surfaces. The coating on the stainless steel surfaces will become damaged and lose its protective properties against soiling.
Stainless steel scratches very easily and even magnets can cause damage to the surface.
15
Guide to the appliance
Exterior view a On/Off sensor b Touch display c "Back" sensor d Door handle e Steam and hot water spout f Drip tray cover g Automatic height-adjustable central spout with lighting h Milk flask with lid
16
Interior view
Guide to the appliance i Ground coffee chute cover j Brew unit k Ground coffee chute l Slide control for the grinder setting m Coffee bean container n Water container o Drip tray with grid p Waste container q Drip tray inside machine door r Central spout connector s Service flap
17
Accessories
These products and other useful accessories can be ordered via the
Miele webshop or directly from Miele
(see back cover for contact details).
Accessories supplied
– Measuring spoon
For ground coffee
– Milk flask with lid
For storing milk and preparing drinks with milk
– Compact lid
For storing the milk flask in the refrigerator
– Cleaning agent for milk pipework
For cleaning the milk system (starter set)
– 2 cleaning containers (large and small)
For cleaning and maintenance of the machine
– Descaling tablets
For descaling the water pipework
(starter set)
– Test strips
For determining the water hardness level
– Silicone grease
For lubricating the seal on the central spout connector
– Cleaning brush
For cleaning the milk pipework
– Central spout connector cap
Spare part
– Milk pipework elbow connector
Spare part
Optional accessories
Miele also offers a range of optional accessories, as well as cleaning and conditioning products for your coffee machine.
– Original Miele all purpose microfibre cloth
For removing finger marks and light soiling
– Milk flask with lid
For storing milk and preparing drinks with milk
– Cleaning agent for milk pipework
For cleaning the milk system
– Descaling tablets
For descaling the water pipework
– Cleaning tablets
For degreasing the brew unit
– Silicone grease
For lubricating the seal on the central spout connector
18
Operating principles
Touch display
The display can be scratched by pointed or sharp objects, e.g. pens.
Only touch the touch display with your fingertips.
Touching the display with your finger creates a tiny charge which releases an electrical impulse. This impulse is recognised by the touch display. The touch display does not react if you touch it with an object.
If your fingers are cold, the Touch display may not react.
The touch display is divided into three sections:
Main menu Drinks
Espresso
Coffee
Long coffee
Cappuccino
Edit User profiles
The top row shows you where you are, with the menu you are in highlighted in white. Open the menu you want by touching the menu name. The time of day is shown in the top right-hand corner.
The middle row shows the current menu and options. You can scroll to the right or left by swiping your finger across the display to the right or left.
The and arrow sensors at the bottom of the screen are used for scrolling to the left or right.
The number of small squares between the arrows indicates the number of pages available and your position within the current menu.
Latte macchiato
19
Operating principles
Operating actions
Each time you touch a possible option the relevant field lights up orange.
Selecting or calling up a menu
Touch the field you want with your finger.
Scrolling through menus
You can scroll to the right or the left. Some options allow you to scroll up and down too.
Swipe the screen, i.e. place your finger on the Touch display and swipe it in the direction you want.
Or:
Using your finger, touch the and arrows to scroll to the left or right.
Exiting a menu ("Back" sensor)
Touch to return to the previous screen.
All selected entries which have not been confirmed with
OK
will not be saved.
Touching the sensor three times in succession will take you to the drinks menu.
Touching the sensor in the User profiles menu will take you step by step back to the beginning.
Entering numbers
You can enter numbers by scrolling through and touching the roller, or by using the numerical keypad.
The altered setting will only be saved once the roller appears grey again.
Touch .
20
The numerical keypad will appear.
Operating principles
Touch the numbers you want.
Once you have entered an accepted value, OK will light up green.
Touch OK .
Entering letters
You can enter names for your own User programmes or drinks using a keyboard.
Try to use short, concise names.
Touch the letters or characters you want.
Touch
Save .
21
Operating principles
Help
Helpful information is available when maintenance programmes are selected.
Help will appear in the bottom row.
To display information in text and pictures,
touch
Help
.
To return to the maintenance programme,
touch Close .
22
Operating principles
Symbols in the display
The following symbols may also appear in the display in addition to the text and drinks symbols:
Symbol
Explanation
Some settings, e.g. display brightness and buzzer/keypad volume, are selected using a bar chart.
This symbol indicates that there is additional information and advice about using the coffee machine.
Select OK to confirm the information.
The system lock is activated (see "Settings – Locking the coffee machine (System lock )"): The coffee machine cannot be operated.
The timer is activated for Switch on at (see "Settings –
Timer"). The symbol and the desired switching on time appear in the display 23:59 hours before the coffee machine is due to switch on, as long as On or Night dimming is selected for the time display.
This symbol appears during the
Clean the milk pipework maintenance programme.
(The symbol is also found on the water container: fill up to this mark).
This appears while the appliance is being descaled.
(This symbol can also be found on the water container: fill up to this mark).
23
Using for the first time
Before using the coffee machine for the first time, please read these instructions and make yourself familiar with the appliance and its controls.
Before using for the first time
Install the coffee machine and connect it to the electricity supply
(see "Electrical connection" and
"Installation").
Remove any protective foil from the front of the machine.
Clean the appliance thoroughly before filling it with water and coffee beans (see "Cleaning and care").
Switching on for the first time
When the coffee machine is switched on for the first time, you will be asked to set the following settings:
– Language and country
– Date
– Time of day
– Display (time display)
Touch the On/Off sensor .
" Miele - Willkommen " appears briefly in the display.
Setting the language
Select the language and then touch OK .
Select the country and then touch OK .
The setting is now saved.
Setting the date
Enter the current date and touch OK .
The setting is now saved.
Setting the time of day
Enter the current time of day and touch OK .
The setting is now saved.
Display
You can choose one of the following options:
– On : The time and date are always visible in the display when the appliance is switched off.
– Off : The display is dark when the machine is switched off.
– Night dimming : The date and the time are only displayed between the hours of 5:00 and 23:00.
Touch the option you want and then OK .
Depending on the setting selected, the coffee machine may use more energy.
A message will appear in the display to inform you of this.
The coffee machine is now successfully set up for use.
Fill the water container with fresh, cold tap water.
24
Water hardness
The water hardness level indicates how much calcium is dissolved in the water.
The higher the calcium content, the harder the water, and the harder the water, the more often the coffee machine will need to be descaled.
The coffee machine measures the amount of water and steam used.
Depending on the level of water hardness set, more or fewer drinks can be dispensed before the appliance needs to be descaled.
Programme the coffee machine to the water hardness level of your area so that it functions correctly and does not get damaged. At the correct time a prompt will then appear in the display to descale the appliance.
The machine has four programmable levels:
Water hardness Water hardness level in your area
Soft 0 - 8.4 °dH
(0 -1.5 mmol/l)
8.4 - 14 °dH
(1.5 - 2.5 mmol/l)
14 - 21 °dH
(2.5 - 3.7 mmol/l)
Medium
Hard
> 21 °dH
(> 3.7 mmol/l)
Hard
Setting (water hardness level)
Soft 1
Medium 2
Hard 3
Very hard 4
The machine is programmed ex-works to hardness level 3.
Using for the first time
Measuring water hardness
You can measure the water hardness yourself using the enclosed test strip.
Alternatively, your local water authority will be able to tell you the hardness of water in your area.
Dip the test strip in your drinking water for approximately one second, then shake off any excess water. The result will be evident after about a minute.
Setting the water hardness level
Touch Settings .
Swipe the display until
Water hardness appears and touch this option.
Select the hardness level you want and then OK .
The setting is now saved.
25
Filling the water container
Change the water every day to prevent a build-up of bacteria.
Only use cold, fresh tap water to fill the water container.
Hot or warm water or other liquids can damage the coffee machine.
Do not use mineral water. Mineral water will cause serious limescale deposits to build up in your machine and damage it.
Open the appliance door.
Pull the water container out to remove it.
Remove the lid and fill the water container with fresh, cold tap water up to the "max." marker.
Push the water container into the machine until it clicks into place.
If the water container is a little high or not pushed in all the way, check whether the surface that the water container sits on is dirty. If the water container is not sitting correctly, the drainage valve will not be sealed.
Clean the surface if necessary.
26
Filling the coffee bean container
Fill the coffee bean container with roasted coffee or espresso beans if you want to use freshly ground coffee beans for each cup of espresso or coffee.
Alternatively, you can make coffee or espresso with ready ground coffee (see
"Making coffee or espresso using ready ground coffee").
Important! Risk of damage to the grinder.
Only put roasted coffee or espresso beans in the container. Anything else, including ground coffee, will damage the grinder.
Do not fill the bean container with any type of liquid.
Useful tip: You can use a nut or seed grinder to grind green coffee beans.
These types of grinder generally have a rotating stainless steel blade. You can then add the ground green coffee portion by portion to the ground coffee chute and make the desired coffee drink (see "Making drinks with ready ground coffee").
Important! Sugar damages the coffee machine.
Do not use coffee beans that have been treated with sugar, caramel, or other substances and do not put liquids containing sugar in the coffee bean container.
Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans.
Green coffee beans are very hard and still contain a certain amount of residual moisture. These can damage the coffee machine grinder as soon as grinding begins.
Pull out the coffee bean container.
Push back the lid and fill the container with coffee beans.
Slide the lid back into place.
Push the coffee bean container back into the coffee machine and close the appliance door.
27
Switching the coffee machine on and off
Switching on
When the coffee machine is switched on, it heats up and rinses the pipework.
This not only cleans the pipework, but also warms it before coffee is prepared.
If the coffee machine still has an operating temperature which is higher than 60 °C, rinsing will not take place.
Touch the On/Off sensor .
The appliance will begin rinsing after the heating-up phase. Hot water will come out of the central spout.
You can now prepare drinks.
Useful tip: Tip: If you do not want the water from the rinsing process to flow into the drip tray, place a suitable container (e.g. the small cleaning container) underneath the central spout before preparing the first coffee of the day.
Switching off
Touch the On/Off sensor .
If coffee has been dispensed, the coffee machine will rinse the coffee pipework automatically before switching off.
Switching off for longer periods of time
If the coffee machine is not going to be used for a longer period of time, e.g.
whilst on holiday:
Empty the drip tray, the waste container and the water container.
Clean all components thoroughly, including the brew unit, the central spout connector and the small drip tray located inside the door.
Switch off the appliance.
If the appliance door is to be left open for a long time, it is advisable to switch off at the wall or the fuse to save energy.
28
The height of the central spout cannot be manually adjusted.
Before making the drink, the central spout moves to the optimum height for the cups or glasses used.
Switching the spout adjustment on and off
The Drinks menu is visible in the display.
Touch
Main menu or .
Touch
Settings .
Swipe the display and select Spout adjustment .
Select the required setting to switch spout adjustment on or off.
Touch
OK .
The setting is now saved.
Spout adjustment
29
Making drinks
The dispensing spouts present a danger of burning or scalding.
The liquids and steam dispensed are very hot.
Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed.
Do not touch hot components.
Making a coffee drink
The following drinks can be made:
– Espresso is a strong, aromatic coffee with a thick hazelnut brown coloured layer of froth - known as the crema - on top.
When making espresso, use espresso roasted coffee beans.
– Coffee differs from espresso by the increased amount of water and the roast of the beans.
Use coffee beans of the correct roast to make coffee.
– Long coffee is a coffee with considerably more water.
Place a cup under the central spout.
Select the type of coffee you want.
Preparation will begin and the coffee will be dispensed into the cup from the central spout.
To ensure that any coffee residues from the factory testing process are removed from the brewing system, please throw away the first two cups of coffee when using the coffee machine for the first time.
30
Making drinks
Dispensing a double portion
You can dispense two portions of espresso or coffee at once either into one cup or two separate cups.
To fill two cups at the same time:
Place one cup under each of the coffee spouts.
Touch the double symbol for the required drink.
Two portions of the desired drink will be dispensed from the central spout.
Cancelling preparation
Touch Stop or Cancel .
Preparing several cups of coffee - Coffee pot
You can make several cups of coffee one after the other automatically with the
Coffee pot
function (max. 1 litre).
Up to eight cups can be made in this way.
The Drinks menu is visible in the display.
Place a sufficiently large container under the central spout.
Select
Coffee pot .
Touch the number of portions you want to dispense (3 to 8).
Follow the instructions in the display.
Each portion will be ground, brewed and dispensed individually. The display will inform you about the progress.
You can interrupt preparation at any time:
Touch Cancel or Stop .
You can use the
Coffee pot
function twice in a row. After this the coffee machine will need a longer cooling down time of an hour in order to avoid it being damaged.
31
Making drinks
Drinks made with ready ground coffee
To make espresso or coffee using ready ground coffee, add a portion of ground coffee to the ground coffee chute.
This gives you the option of preparing a cup of decaffinated coffee, for example, even though the coffee bean container is filled with roasted coffee beans.
The coffee machine will recognise automatically that ready ground coffee has been added to the ground coffee chute.
Only one portion can be prepared at a time when using ready ground coffee or espresso.
Adding ready ground coffee
Do not add more than one level scoop of ground coffee to the coffee chute. If too much is added, the brew unit will not be able to process the coffee.
The coffee machine will use all the ground coffee which has been added to the chute to make the next coffee.
Use the measuring spoon supplied so that the correct amount is used.
Open the appliance door.
Remove the coffee chute cover and open the lid of the coffee chute.
Add one level scoop of ready ground coffee to the chute.
Close the lid, push the coffee chute cover into the machine and close the appliance door.
Prepare ground coffee?
appears in the display.
32
Making drinks
Making drinks with ready ground coffee
If you want to make a drink with ready ground coffee:
Touch Yes .
You can now select which type of drink you would like to make with ready ground coffee.
Place a cup under the central spout.
Select a drink.
The coffee machine will now prepare the desired drink.
If you do not want to use ground coffee to make the drink:
Touch
No .
The ground coffee will be directed into the waste container.
If no drink is selected within15 seconds, the ground coffee will be directed into the waste container.
Drinks with milk
Danger of burning and scalding on the central spout.
The liquids and steam dispensed are very hot.
Do not use milk with additives. Most additives contain sugar which will adhere to the milk pipework and damage the machine.
If using cow's milk, only use pasteurised milk to prevent a buildup of bacteria in the appliance.
The following drinks with milk can be made:
– Cappuccino consists of approx.
2/3 milk froth and 1/3 espresso.
– Latte macchiato consists of 1/3 each of hot milk, milk froth and espresso.
– Caffè latte consists of hot milch and espresso.
Hot milk or milk froth can also be made.
33
Making drinks
Notes on the milk flask
Milk is not cooled in the milk flask.
Therefore, place the milk flask in the refrigerator if you are not going to use milk for a while. Good milk froth can only be achieved when cold milk
(below 10 °C) is used.
a Lid b Milk sensor c Milk suction tube d Glass milk flask
Fill the milk flask up to max. 2 cm below the rim. Seal the milk flask with the lid.
It is important to keep the opening and neck of the milk flask clean
(whilst filling it and carrying it). Any soiling can lead to a malfunction of the flask in the machine.
Push the milk flask into the coffee machine.
Preparing drinks with milk
The Drinks menu is visible in the display.
Place a suitable vessel underneath the central spout.
Select the drink you want.
The coffee machine will now prepare the selected drink.
34
Making drinks
Preparing hot water
Danger of burning and scalding on the hot water spout. The water dispensed is very hot.
The Drinks menu is visible in the display.
Please note that the water prepared by the machine is not boiling and is therefore not suitable for preparing tea.
Place a suitable vessel underneath the hot water spout.
Select
Hot water .
Hot water will be dispensed into the vessel under the hot water spout.
To cancel preparation:
Touch
Stop or Cancel .
Preparing User profile drinks
If you have already created a User profile (see "User profiles"), you can select it before preparing a drink.
Touch
User profiles and select the profile you want..
The name of the User profile and the created drinks will appear in the display.
You can now prepare the drink you want.
35
Making drinks
After a drink has been prepared
If you have made a drink with milk, Start the rinsing programme will appear in the display after a while.
Touch
OK .
The milk pipework will now be rinsed.
Even if you do not confirm the message with "OK", the coffee machine will rinse the pipework after a while automatically.
Useful tip: Remove the milk flask and rinse the lid under running water. Then fit the small lid to the milk flask and store the flask in the fridge until it is needed again.
You can only achieve good quality milk froth with milk which is cold (< 10 °C).
36
Coffee the way you like it
In order to customise the coffee machine to the type of coffee being used, you can
– change the grinder setting,
– change the amount of coffee,
– set the brewing temperature, or
– pre-brew the coffee powder.
Grinder setting
When the beans are ground correctly, the coffee or espresso will flow evenly into the cup with a good crema.
The crema should have an even nutbrown colour.
The grinder setting you select will be used for all coffee drinks.
There are various ways to tell whether the coffee grinder is set correctly.
The coffee has been too coarsely ground if:
– Espresso or coffee flows into the cup too quickly.
– The crema is very pale and uneven.
Set a finer grinder setting.
The coffee has been too finely ground if:
– Espresso or coffee only trickles into the cup.
– The crema is dark brown.
Set a coarser grinder setting.
To avoid damaging the grinder, please note the following:
Only adjust the grinder one setting at a time.
Grind the coffee beans again if you want to adjust the grinder to the next setting.
Open the appliance door.
Push the slide control one setting to the left (for finer grinding) or one setting to the right (for coarser grinding).
Close the appliance door.
Dispense a coffee.
Then you can adjust the grinder setting with the slide control again.
The altered grinder setting will not be used until after the second coffee has been dispensed.
37
Coffee the way you like it
Changing the parameters of a drink
You can change the amount of coffee, pre-brewing and the brewing temperature for each drink.
The Drinks menu is visible in the display.
Touch
Edit
or select
Make drinks
.
Touch Change drink .
Select a drink.
Touch
Drink parameters .
For this drink you can now
– change the amount of coffee,
– set the brewing temperature, and
– switch on the "Pre-brewing" option.
Amount of coffee
The coffee machine can grind and brew
6-14 g of coffee beans per cup. The greater the quantity, the stronger the coffee.
There are various ways to tell whether the amount of coffee is set correctly.
The amount of coffee is too low if:
– Espresso or coffee flows into the cup too quickly.
– The crema is very pale and uneven.
– The espresso or coffee lacks body.
Increase the amount of coffee so that more ground coffee is brewed.
The amount of coffee is too high if:
– Espresso or coffee only trickles into the cup.
– The crema is dark brown.
– The espresso or coffee tastes bitter.
Decrease the amount of coffee so that less ground coffee is brewed.
Touch
Amount of coffee .
Select the amount of coffee you want using the bar chart and then touch OK .
The setting is now saved.
Useful tip: If the coffee is too strong for you or it tastes bitter, try a different type of bean.
Brewing temperature
The ideal brewing temperature will depend on
– the type of coffee being used,
38
Coffee the way you like it
– whether an espresso or a coffee is being prepared, and
– the altitude of the region.
If the coffee machine is located at more than 2000 metres above sea level, the brewing temperature needs to be set lower due to the change in pressure.
This is because the boiling point for water at a high altitude above sea level is lower than the boiling point for water at sea level.
Useful tip: Not all types of coffee can withstand a high temperature. Certain types are too delicate - the crema on top would not be as good and the taste would be impaired.
The coffee machine has five brewing temperatures.
Swipe the screen in the
Brew temperature field until the setting you want appears.
Touch
OK
.
The setting is now saved.
Pre-brewing ground coffee
When the pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water.
Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavour of the coffee.
You can set pre-brewing for a normal length of time or an extra long length of time. Alternatively, you can switch off the "Pre-brewing" function.
The machine is supplied with the "Prebrewing" function switched off.
Swipe the screen in the
Pre-brewing field until the setting you want appears.
Touch
OK
.
The setting is now saved.
39
Portion size
The flavour of the coffee produced depends not just on the type of coffee used, but also on the amount of water used.
You can programme the amount of water to suit the size of your cups and the type of coffee you are using.
For coffee drinks that use milk you can also set the amount of milk or milk froth to be dispensed with these drinks.
Additionally, you can set the portion sizes for hot milk and milk froth alone.
Each type of drink has a maximum portion size that can be programmed into the machine. The coffee machine halts preparation of the coffee once this portion size has been reached. The maximum possible portion size for this type of drink is then saved in the machine.
The changed portion size is always saved in the current User profile. The name of the current User profile appears in the top-left of the display.
The
Drinks
menu is visible in the display.
Place the desired cup under the central spout.
Touch Edit and then Change drink .
Select a drink.
Touch
Change the portion size .
The desired drink will be made and
Save will appear in the display.
When the cup is filled up to the level you want, touch Save .
If you want to change the portion size for coffee specialities made with milk
(e.g. Cappuccino), the ingredients
(components) which make up the drink will be saved one after the other while the drink is being made.
When the quantity for each ingredient reaches the level you want, touch
Save .
The combination programmed in and the total portion size will now be dispensed every time that particular drink is selected.
If the water container becomes empty during the preparation of a drink, the programming of the portion size will be cancelled. The portion size will not be saved.
40
You can reset drink portions and parameters for all drinks to the factory default.
The Drinks menu is visible in the display.
Touch
Edit and then Reset drinks .
Reset all drinks to default settings?
appears in the display.
Touch
Yes .
Resetting drink settings
41
User profiles
In addition to the Miele profile, you can enter individual profiles to cater for different tastes and preferences.
For each profile you can adjust the settings for drinks individually (portion size, grinder setting, brew temperature and pre-brewing).
The name of the current User profile is shown in the top left of the display.
Calling up User profiles
Touch
User profiles in Main menu or in the
Drinks
menu.
You can now create a User profile.
If you have allocated a profile in addition to the Miele standard profile, you have the following options:
– Select profile from the User profiles that have already been allocated.
– Change name if the name of a User profile needs to be changed.
– Delete profile if you want to delete a
User profile.
– Change profile to set whether the coffee machine automatically always reverts to the Miele standard profile or retains the last selected profile.
Creating a User profile
Touch
Create profile .
The editor will open in the display.
Enter the name you want and then touch OK .
Selecting a User profile
Select the User profile you want.
The name of the current User profile is shown in the top left of the display.
Changing a name
Select
Edit
and then
Change name
.
Select the profile you want and then touch OK .
Enter the name you want and then touch OK .
Deleting a profile
Select
Edit and then Delete profile .
Select the profile you want and then touch
OK
.
42
Changing a User profile
You can set up the coffee machine so that after each use it automatically reverts back to the Miele standard profile, or it retains the last selected
User profile.
Select Edit and then Change profile .
You now have the following options:
– Manual: The selected User profile remains active until you select another User profile.
– After each use: The machine will change back to the Miele standard profile automatically after a drink is dispensed.
– When switched on: Each time the machine is switched on it will automatically select the Miele standard profile regardless of which
User profile was set before the machine was last switched off.
Select the option you want and then touch OK .
User profiles
43
User profiles: Creating and editing your own drinks
You can create your own drinks for each User profile and for each drink you can individually adjust the portion size and other parameters, e.g. amount of coffee or temperature.
You can also change the names of your drinks and delete any unwanted drinks from your User profile. A maximum of nine drinks can be saved under one
User profile.
First open the required User profile:
Select
Main menu User profiles
or touch User profiles in the Drinks menu.
Select the User profile you want.
The name of the current User profile is shown in the top left of the display.
Creating a drink
You can create new drinks while using the drinks already available as a basis.
A maximum of nine drinks can be saved under one User profile.
Touch
Edit .
Touch
Create drink
.
Make a selection from the standard drinks available:
Select a drink.
Change the drink parameters and portion size for this drink according to your preferences (see "Coffee the way you like it" and "Changing the portion size").
Drink preparation will be begin and you can save the portions of each component as desired.
Enter a name for the new drink
(maximum 8 characters) and touch
Save .
The new drink will appear in the current
User profile.
Changing a drink: Changing the portion sizes, drinks parameters and names
Touch Edit .
Select
Change drink .
Select a drink.
Now you can adjust the portion sizes, change the parameters or change the names.
Deleting drink
Touch
Edit .
Select
Delete drink
.
Select the drink you want and touch
OK .
44
MyMiele
You can display drinks you make frequently, drinks from profiles and maintenance programmes in the
MyMiele screen.
The MyMiele screen can be set to appear as the start screen (see
"Settings - Start screen"). The MyMiele screen will then appear when the coffee machine is switched on.
Opening the MyMiele menu
Touch
Main menu MyMiele .
You can now configure My Miele.
If you have already added some entries, you can carry out the following under
Edit
:
– Sort entries
– Delete entries
Adding an entry
Touch
Add entry
.
You can select options listed in the following categories:
– Drinks
– User profiles
– Maintenance
Select the entry you want and then touch OK .
A box will appear next to the selected option together with the menu it comes from.
Deleting an entry
Touch
Edit .
Select
Delete entry .
Select the entry you want and then touch OK .
The entry will be deleted.
Sorting entries
If you have added more than four entries, you can sort them.
Touch
Edit .
Select
Sort entry
.
Select the entry you want to move and the position you want to move it to.
Confirm the new position with OK .
45
Settings
You can use the "Settings" menu to customise the coffee machine to suit your individual requirements.
Open the Settings menu
The Drinks menu is visible in the display.
Touch Main menu or .
Select
Settings .
You can now check or make alterations to settings.
The settings which are currently selected will have a coloured frame around them.
Touching takes you back to the previous menu.
Changing and saving settings
Touch
Main menu or .
Select
Settings .
Select the option you want to change.
Change the setting and touch
OK .
The setting is now saved.
46
Settings
Overview of available settings
The factory default for each option is indicated by *.
Menu option
Select language
Time
Date
Timer
Eco mode
Lighting
Available settings deutsch and other languages
Country
Display
– Off * / On / Night dimming
Clock type
–
Analogue
/
Digital
*
Clock format
– 12 h (am/pm) / 24 h *
Set
Set
Timer 1
–
Set
:
Switch on at
/
Switch off after
(00:30)* /
Switch off at
– Days of the week : Monday / Tuesday / Wednesday /
Thursday / Friday / Saturday / Sunday
– Activate : Switch on at ( Yes / No *) / Switch off at ( Yes /
No *)
Timer 2
–
Set
:
Switch on at
/
Switch off at
– Days of the week : Monday / Tuesday / Wednesday /
Thursday / Friday / Saturday / Sunday
– Activate : Switch on at ( Yes / No *) / Switch off at ( Yes /
No *)
On
* /
Off
Brightness
Switch off after
47
Settings
Menu option
Start screen
Info
System lock
Water hardness
Volume
Spout adjustment
Showroom programme
Factory default
Available settings
Main menu
Drinks
User profiles
MyMiele
Number of drinks
–
Total coffee drinks
/
Espresso
/
Coffee
/
Long coffee
/
Cappuccino / Latte macchiato / Caffè latte / Milk froth / Hot milk / Hot water
No. of portions until
Descale appliance / Degrease the brew unit
On / Off *
Soft 1
Medium 2
Hard 3 *
Very hard 4
Buzzer tones
Keypad tone
On / Off *
Demo mode ( On / Off *)
Settings
MyMiele
48
Settings
Language
You can select a language and country for all display texts.
Useful tip: If you select the wrong language by mistake, you can find the
"Language" option by following the flag symbol .
Time of day
You can set the clock type, when the time appears in the display after switching off, the clock format and the time.
Display (time display)
You can choose one of the following options:
– On : The time and the date will appear in the display all the time, even when the coffee machine is switched off.
–
Off
: The time and the date will not appear in the display when the coffee machine is switched off.
–
Night dimming
: The date and time are displayed from 5:00 to 23:00.
Depending on the setting selected, the coffee machine may use more energy.
A message will appear in the display to inform you of this.
Clock type
The time can be displayed as
Analogue or
Digital.
Clock format
You can select:
– 24-hour display ( 24 h )
– 12-hour display (
12 h (am/pm)
)
Setting the time of day
Set the hours and then the minutes.
Date
Set the day, month and year.
49
Settings
Timer
There are two timers with the following timer functions:
The coffee machine
– switches on at a particular time, e.g.
in the morning for breakfast ( Switch on at ).
– switches off at a particular time
( Switch off at ).
– switches off after a particular length of time if none of the sensors has been touched or a drink has not been made ( Switch off after ; Timer 1 only).
You can allocate the timer functions to individual days of the week.
For Switch on at and Switch off at , the timer must be activated and at least one day of the week allocated.
Selecting a timer
You can select:
– Timer 1: Switch on at , Switch off at ,
Switch off after
– Timer 2:
Switch on at
,
Switch off at
Switch on at
The coffee machine will not switch on at the required time if you have activated the system lock.
The timer settings are deactivated.
If the coffee machine has switched itself on three times via the Switch on at timer function and no drinks have been dispensed, the machine will not switch itself on again automatically. This prevents the coffee machine from switching itself on unnecessarily, for example, whilst you are away on holiday.
The programmed times will, however, remain in memory and will be reactivated after manually switching the machine on again.
Switch off at
In the event of a longer absence the programmed times will remain in memory and will be reactivated after manually switching the machine on again (see "Switch on at").
50
Settings
Switch off after
The Switch off after timer function is only available in Timer 1.
If none of the sensors has been pressed or no drink has been prepared, the coffee machine will switch itself off after
30 minutes to save energy.
You can change this pre-setting to a time of between 15 minutes and 9 hours.
Allocating days of the week
Select the day of the week you want.
The selected day of the week will be marked by .
When all required days of the week are marked:
Touch OK .
Activating and deactivating the timer
For the time display, you have selected
On or Night dimming :
If the timer for Switch on at has been activated, the symbol and the desired switch-on time appear in the display 23:59 hours ahead of time.
When the system lock is activated, the
Switch on at option for the timer cannot be selected.
Select the required timer function. The selected timer function will be marked by .
Touch
OK
.
51
Settings
Eco mode
Eco mode is an energy-saving mode.
The steam system heats up when a coffee drink or steam for hot milk / milk froth is requested.
If Eco mode is switched off, milk froth and hot milk, as well as coffee and espresso, can be made one after another. The steam system remains heated up and much more energy is used.
The coffee machine will indicate that the energy consumption has been altered.
Lighting
The following options are available:
– Set the brightness of the lighting when the appliance is switched on.
– Set the brightness of the lighting when the appliance is switched off.
– You can specify when the lighting should switch off (
Lighting
:
Switch off after ).
Set the brightness of the display
First select:
– Appliance switched on
– Appliance switched off
Setting the switching off time for the lighting (Switch off after)
You can set how long the lighting should remain on after switching off the coffee machine.
While the appliance is switched on, the lighting will remain on for
10 minutes after the last activity. This time cannot be changed.
52
Start screen
You can choose which screen appears when the coffee machine is switched on.
– Main menu
– Drinks
– User profiles
–
MyMiele
Info (display information)
In the Info option you can choose to display the number of prepared portions for each type of drink.
You can also see whether more than
50 portions can be dispensed before the machine needs to be descaled or before the brew unit needs to be degreased ( No. of portions until ...).
To return to the previous display:
Touch OK .
Settings
Locking the coffee machine
(System lock )
You can lock the coffee machine to prevent it being used without your knowledge, by children, for example.
Activating and deactivating the system lock
When the system lock is activated, the
Switch on at option for the timer is deactivated. The coffee machine will not switch on at the time set.
Overriding the system lock
While the message Press for seconds to unlock appliance is in the display,
touch the lock symbol .
As soon as you switch the coffee machine off, the system lock will be activated again and the coffee machine is locked once more.
53
Settings
Water hardness
See "Setting up and using the coffee machine" for information about water hardness.
Display brightness
You can set the display brightness using the bar chart.
Volume
You can set the volume of buzzer and keypad tones using the bar chart.
Warming drawer
You can connect a warming drawer directly to the coffee machine with a special connection cable (optional accessory). Suitable warming drawers for this coffee machine are listed earlier in these operating instructions. You can also contact Miele should you require further information.
The special connection cable needed can be purchased by contacting Miele.
After connecting the appliance to the electricity supply, you need to activate the warming drawer in Settings .
You can choose one of the following options:
– Automatic : The warming drawer will switch on and off together with the coffee machine.
If you have programmed the
Switch on at timer, the warming drawer will switch on approx. 30 minutes before the coffee machine switches on in order to pre-heat your cups.
– On : You can switch the warming drawer on or off at any time independently of the coffee machine.
– Off : The warming drawer cannot be switched on (the pre-requisite for this option is that the warming drawer must be connected to the coffee machine via the connection cable).
The warming drawer is set to Off at the factory.
54
Spout adjustment
You can find information on adjusting the height of the spout in the "Spout adjustment" section of this booklet.
Factory default
You can reset the settings back to the ones which were set when the coffee machine was delivered - the factory default settings.
When you do this, the language and time settings will not be deleted. The number of drinks dispensed and the coffee machine status (number of uses until descaling/degreasing the brew unit) will not be reset either.
Please refer to the "Overview of available settings" chart for the factory settings which are shown in bold.
The following settings can be reset separately:
– MyMiele
– Profiles and their drinks: see "User profiles" and "User profiles: Creating and editing your own drinks"
– (Standard) Miele Profile portion sizes and parameters: see "Resetting drinks"
Settings
Showroom programme (Demo mode)
Do not activate this function for domestic use.
The appliance can be presented in
Miele Centers or retail stores with the
Showroom programme function. The lighting will come on but drinks cannot be dispensed and other actions cannot be carried out.
If you activate the Demo mode, you cannot switch the appliance off with the On/Off sensor .
55
Cleaning and care
Clean the coffee machine regularly to avoid a build-up of bacteria.
Quick guide
Recommended frequency
Every day
(at the end of the day)
Once a week
(more often if heavily soiled)
Once a month
When prompted
What do I need to clean / maintain?
Milk flask and lid
Water container
Waste container
Drip tray and drip tray cover
Central spout
Sensor cover
Clean the milk valve with the cleaning brush
Interior
Drip tray inside the machine door
Brew unit
Appliance front (especially important straight after descaling)
Lubricate the cap on the central spout connector
Coffee bean container
Milk pipework (with the Original Miele cleaning agent for milk pipework)
Brew unit (degrease with the cleaning tablets)
Descaling the machine
56
Cleaning and care
Cleaning by hand or in the dishwasher
The following components must only be cleaned by hand:
– Central spout cover
– Brew unit
– Bean container and lid
– Service flap
Some components of the coffee machine are dishwasher safe.
However, cleaning these in the dishwasher frequently can cause them to become discoloured due to regular contact with food residues
(e.g. tomatoes) in the dishwasher.
The surface of these components can also become damaged.
The following components are dishwasher safe:
– Drip tray and grid
– Drip tray cover
– Water container
– Waste container
– Central spout (without stainless steel cover)
– Sensor cover
– Milk flask with lid
– Drip tray inside machine door
Danger of burning and scalding on hot components or by hot liquids.
Always allow the coffee machine to cool down before cleaning it.
Caution: Water in the drip tray can be very hot.
Do not use a steam cleaner to clean this machine. Steam could reach the electrical components and cause a short circuit.
It is important to clean the machine regularly as the used coffee grounds will soon go mouldy. Milk residue can spoil and the milk pipework can become blocked.
The central spout connector cap is lubricated with silicone grease.
Take care not to get this on your clothes when removing or replacing the containers or other components.
57
Cleaning and care
All external surfaces are susceptible to scratching. Scratches on glass surfaces could even cause a breakage. Contact with unsuitable cleaning agents can discolour the external surfaces. Wipe up any spillages or splashes of descaling agent immediately.
To avoid damaging the surfaces of your appliance, do not use:
– cleaning agents containing soda, ammonia, acids or chlorides,
– solvent-based cleaning agents,
– cleaning agents containing descaling agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– glass cleaning agents,
– oven cleaner,
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners,
– hard, abrasive sponges, e.g. pot scourers, brushes or sponges which have been previously used with abrasive cleaning agents,
– dirt erasers,
– sharp metal tools.
58
Cleaning and care
Drip tray
Danger of burning!
If the rinsing process has just finished, wait a while before removing the drip tray as the water used for rinsing will run out of the coffee spouts.
Clean the drip tray every day to avoid unpleasant smells and mildew.
A prompt will appear in the display when the drip tray is full and needs to be emptied. Empty the drip tray at the latest when this prompt appears.
Open the machine door and carefully remove the drip tray from the machine.
The grid in the drip tray prevents the water from spilling out of the tray when it is being carried.
Clean the drip tray and the grid with hot water and a little washing-up liquid applied a soft cloth, or in the dishwasher, and dry with a cloth.
Clean the metal contact discs and the space between them carefully. Dry everything thoroughly.
The discs will not be able to detect that the drip tray is full if they are damp or dirty.
Check this area once a week, if necessary.
Clean the area underneath the drip tray.
Push the drip tray back into the coffee machine.
Make sure that the drip tray is pushed right into the coffee machine as far as it will go.
59
Cleaning and care
Drip tray cover
Remove the drip tray cover.
The drip tray cover can be cleaned in the dishwasher, or by hand using hot water and a little washing-up liquid applied with a soft cloth
Dry the drip tray thoroughly.
Water container
Change the water every day to prevent a build-up of bacteria.
Make sure that the valve, the underside of the water container and the surface the water container sits on are clean. Otherwise the water container will not sit correctly.
The water container can be cleaned in the dishwasher, or by hand using hot water and a little washing-up liquid applied with a soft cloth. After cleaning, dry the water container.
Refit the cover in the drip tray. Make sure the drip tray cover sits flush at the front.
Carefully clean and dry the surface the water container sits on, particularly the slots.
60
Cleaning and care
Waste container
After a certain period of time a reminder to empty the waste container will appear in the display. The waste container must be cleaned when this message appears.
However, it is better to clean the waste container every day to prevent coffee grounds from turning mouldy.
There will probably also be some water in the waste container left over from the rinsing process.
Clean the waste container with hot water and a little washing-up liquid or in the dishwasher, and dry with a soft cloth.
Also thoroughly clean the now accessible area in the machine where the waste container sits.
Central spout
With the exception of the stainless steel cover, all parts of the central spout should be cleaned in the dishwasher at least once a week. This will remove coffee deposits effectively.
Clean the stainless steel central spout cover by hand only using warm water and a little washing-up liquid, applied with a soft cloth.
The central spout must move into the maintenance position before cleaning.
Once in the maintenance position, all parts can be removed.
If there is a cup or container underneath the central spout, make sure that you remove this as it would prevent the central spout from moving into the maintenance position.
Touch
Main menu or .
Select
Maintenance
and then
Clean the central spout .
Follow the instructions in the display.
The central spout will move into the maintenance position .
61
Cleaning and care
Remove the cover by pulling it towards you .
Press the catch upwards, grasp the dispensing unit by the handle and pull this forwards and off .
Hold the unit at the sides and pull it forwards to release it.
62
Cleaning and care
Turn the top connection piece and pull it upwards to remove it. Remove the lower connection piece in the same way.
Remove the dispensing spouts .
The Y-shaped piece should not be removed.
Clean all parts thoroughly.
Useful tip: Place the dispensing unit vertically in the upper basket of the dishwasher. Place the connecting pieces and the dispensing spouts in the cutlery tray.
Clean the surfaces of the central spout with a damp cloth.
63
Cleaning and care
Sensor cover
The sensor cover for the cup protection switch-off is located at the base of the central spout. If the automatic spout adjustment sensors do not properly recognise a cup, the cup protection switch-off will stop the central spout from lowering.
Clean the sensor cover once a week in the dishwasher or by hand using warm water and a little washing-up liquid, applied with a soft cloth.
Reassemble the spout unit in the reverse order. Make sure the top connection piece engages with a click. Firmly push the spout jets onto the dispensing unit.
Make sure that all parts are tightly connected to one another.
Refit the dispensing unit in the central spout and touch
OK
.
Then refit the cover and touch
OK .
The central spout will now be rinsed through.
To remove the sensor cover, press and hold the cover between the two dispensing spouts. Then press the sides of the central spout at the back.
The sensor cover will come off.
To refit it:
Insert both hooks at the back and press the sensor cover upwards.
64
Cleaning and care
Maintenance of the milk valve
The milk valve should be cleaned once a week to ensure good quality milk froth and prevent sputtering.
The Drinks menu is visible in the display.
Touch Main menu or .
Select Maintenance and then Clean the central spout .
The central spout and the milk valve will move into the maintenance position.
You must remove the cleaning brush before confirming the OK message in the display. Otherwise the coffee machine will be damaged.
Milk flask with lid
Soiling can cause a fault in the machine.
It is important to keep the neck and flange of the flask clean (whilst filling it and carrying it).
Clean the milk flask holder on the coffee machine with a damp cloth.
Clean the glass milk flask in the dishwasher or by hand using hot water and a little washing-up liquid applied with a soft cloth. Dry the milk flask thoroughly.
Before placing the lid of the milk flask in the dishwasher:
Insert the brush in the milk valve and move it back and forth.
Touch OK .
The milk valve will move into the initial position and the milk pipework will be rinsed.
Rinse the milk pipework in the lid under running water.
If water does not run out of the milk pipework ,
dismantle the milk flask lid and clean it with the cleaning brush supplied.
65
Cleaning and care
Dismantling the milk flask lid and cleaning it with the cleaning brush
Milk fat deposits can collect in the milk flask lid. These will cause the milk to sputter when milk froth is being made.
Pull the milk suction tube out of the milk flask lid. Make sure you remove the seal as well.
Clean both parts under warm running water.
Insert the cleaning brush supplied in the stainless steel tube and move it back and forth until all milk residues have been removed.
Also use the cleaning brush to clean the milk pipework in the lid from above and below.
To reassemble the lid:
First insert the seal in the lid.
Make sure you do not fit the slanted end of the milk intake tube into the seal. This would damage it.
Fit the milk intake tube into the seal.
66
Cleaning and care
Interior and appliance door
First take out all removable parts and then clean the interior and the machine door with a mild solution of hot water and washing-up liquid.
Useful tip: Use your vacuum cleaner to remove dry ground coffee residues.
A small drip tray is located inside the lower part of the machine door.
Central spout connector
The part which connects the brew unit and the central spout is located on the inside of the machine door.
Remove the drip catcher and clean it in the dishwasher or by hand using warm water and a little washing-up liquid applied with a soft cloth.
Do not forget to refit this small drip tray.
Clean this connection regularly with a damp cloth, taking care not to wipe the grease off the cap.
Lubricate the cap at least once a month with the silicone grease supplied.
67
Cleaning and care
Brew unit
Removing and cleaning the brew unit by hand
Clean the brew unit by hand only using warm water. Do not use washing-up liquid.The moving parts of the brew unit are lubricated.
Washing-up liquid will damage the brew unit.
The brew unit can be removed for cleaning.
It should be cleaned once a week.
Open the appliance door.
Remove the water container, waste container and the coffee chute cover.
If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (See
"Problem solving guide").
When you take the brew unit out of the machine, do not change the position of the brew unit handle, as this would cause the brew unit to be out of alignment and you will not be able to push it back into the coffee machine.
Clean the brew unit by hand under warm running water without using washing-up liquid.
Press the button under the handle of the brew unit and, whilst doing so, turn the handle clockwise .
Press the catch in front of the brew unit downwards, and pull the brew unit carefully out of the machine.
Carefully pull the brew unit out of the coffee machine.
Wipe any remaining coffee off the two filters. One filter is located in the funnel and the other to the left of the funnel.
Dry the funnel to prevent ground coffee sticking to it the next time a coffee is prepared.
Clean the inside of the coffee machine. Use your vacuum cleaner to remove dry coffee grounds.
68
Cleaning and care
To refit the brew unit:
Proceed in the reverse order: push the brew unit back into the coffee machine, making sure it goes in straight.
Press the button under the handle of the brew unit and, whilst doing so, turn the handle to the anticlockwise .
Close the appliance door.
Maintenance programmes
The coffee machine has the following maintenance programmes:
– Rinsing the appliance
– Rinsing the milk pipework
– Cleaning the milk pipework
– Degreasing the brew unit
– Descaling the machine
Carry out the relevant maintenance programme when the prompt to do so appears in the display. Please see the following pages for more information.
Opening the "Maintenance" menu
The Drinks menu is visible in the display.
Touch
Main menu or .
Select
Maintenance
.
You can now select a maintenance programme.
69
Cleaning and care
Rinsing the appliance
After a coffee has been dispensed, the machine is rinsed before it switches off.
This removes any residual coffee grounds.
The
Drinks
menu is visible in the display.
Touch
Main menu or .
Select
Maintenance and then Rinse appliance
.
The pipework will be rinsed and the water used for rinsing will come out of the central spout.
Rinsing the milk pipework
The milk pipework can become blocked with milk residue. If you have prepared a drink using milk, the coffee machine will automatically rinse the milk pipework after a few minutes.
The Drinks menu is visible in the display.
Touch
Main menu or .
Select
Maintenance
and then
Rinse milk pipework .
The milk pipework will now be rinsed.
70
Cleaning and care
Cleaning the milk pipework
Ensure that all components in which milk is transported are cleaned on a regular basis. Milk naturally contains bacteria that rapidly multiply if the milk pipework is not cleaned properly. Soiling in the appliance may be dangerous to health.
The milk pipework must be cleaned at least once a week.
The coffee machine will prompt you at the correct time. Clean the milk pipework in days will appear in the display three days before the coffee machine is due to be cleaned. Each time the coffee machine is switched on the number of days until the milk pipework needs to be cleaned will appear in the display.
Confirm the message with
OK .
When the number of days remaining reaches 0, Clean the milk pipework will appear in the display. You cannot make drinks with milk until cleaning has been carried out.
You can then only prepare espresso, coffee, long coffee and hot water. You can only prepare drinks containing milk after the milk pipework has been cleaned.
Confirm the message with
OK .
Carrying out the milk pipework cleaning process
The cleaning process cannot be cancelled once it has started. The process has to be completed through to the end.
The Clean the milk pipework maintenance programme lasts for approx. 13 minutes.
The Drinks menu is visible in the display.
Touch
Main menu
or .
Select Maintenance and then Clean the milk pipework .
The process begins and various messages appear in the display.
Follow the instructions in the display.
When
Fill water container with lukewarm water and cleaning agent up to the symbol and insert appears in the display, proceed as follows.
Making a cleaning solution
We recommend using the Miele cleaning agent for milk pipework for cleaning the milk pipework.
This has been specially developed for use with Miele coffee machines and prevents subsequent damage.
The milk pipework cleaning agent is available to order from Miele or via the internet at www.miele-shop.com
(depending on country).
Add one sachet of the cleaning agent for milk pipework to the water container.
71
Cleaning and care
Fill the water container to the
marker with lukewarm water and stir the solution.
Please adhere to the mixing ratio. It is important that you do not fill the water container with too little water, otherwise cleaning will be incomplete.
Insert the water container and close the appliance door.
Follow the instructions in the display.
When prompted to by the display:
Carefully rinse the water container with clean water. Ensure that no cleaning agent residue remains in the water container. Then fill the water container with fresh tap water.
The cleaning process is finished when
Process finished appears in the display.
Degreasing the brew unit
Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. It must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine.
We recommend using Miele cleaning tablets to clean the brew unit. These have been specially developed for use with Miele coffee machines and prevent subsequent damage.
Miele cleaning tablets can be ordered via the Miele webshop or directly from
Miele (see back cover for contact details).
The maintenance programme for degreasing the brew unit lasts for approx. 11 minutes.
After 200 portions have been dispensed,
Degrease the brew unit
will appear in the display.
Confirm the message with
OK .
This message will not go out until the brew unit has been degreased.
Carrying out the "Degrease the brew unit" process
Switch the machine on with the On/
Off sensor.
Touch
Main menu or .
The cleaning process cannot be cancelled once it has started. The process has to be completed through to the end.
Select Maintenance and then
Degrease the brew unit .
72
Follow the instructions in the display.
When Place a cleaning tablet in the ground coffee chute and close the chute appears in the display:
Cleaning and care
Remove the coffee chute cover and open the lid of the coffee chute.
Place a cleaning tablet in the coffee chute.
Close the lid, replace the coffee chute cover and close the machine door.
Follow the further instructions given in the display.
When Process finished appears in the display:
Touch
OK .
The brew unit is now degreased.
73
Descaling the machine
Important! When descaling the machine, cover delicate surfaces and natural flooring to prevent damage from splashes of descaling solution.
Ensure that any splashes of descaling solution are wiped up immediately.
Limescale builds up in the coffee machine through use. How often the appliance needs to be descaled will depend on the water hardness level in your area. The machine should be descaled regularly to ensure that it functions correctly.
The appliance will guide you through the descaling process. Various messages will appear in the display, e.g. you will be prompted to empty the drip tray or fill the water container.
The descaling process is essential and takes approx. 20 minutes.
The coffee machine prompts you when it needs to be descaled.
No. of portions until appliance needs descaling: 50 appears in the display. Each time a drink is prepared, the coffee machine displays the number of portions remaining until descaling must be carried out.
Confirm the message with
OK
.
When the number of remaining portions reaches 0, the coffee machine will lock out.
Then Descale will appear in the display.
You can switch off the coffee machine if you do not want to descale it at this point in time. However, you will be able to prepare drinks only after descaling has been carried out.
Descaling after prompt appears in the display
Descale appears in the display.
The descaling programme cannot be cancelled once you have touched OK.
The programme has to be completed through to the end.
Touch
OK
.
The process will start.
Follow the instructions in the display.
When
Fill water container with lukewarm water and descaling solution up to the symbol and insert appears in the display, proceed as follows.
Creating the descaling solution
We recommend using Miele descaling tablets for optimum results.
These have been specially developed for use with Miele coffee machines and prevent subsequent damage.
Other descaling agents, which contain other acids besides citric acid and/or other undesirable substances, such as chlorides for example, could damage the coffee machine. Moreover, the descaling effect required could not be guaranteed if the descaling solution was not of the appropriate concentration.
Miele descaling tablets are available to order via the Miele webshop or directly from Miele (see back cover for contact details).
You will need 2 descaling tablets for the descaling process.
74
Descaling the machine
Fill the water container to the marker with lukewarm water.
Drop 2 descaling tablets in the water.
Follow the instructions for the mixing ratio carefully. It is important that you do not fill the water container with too much or too little water.
Otherwise the descaling process will be cancelled prematurely.
Carrying out descaling
Insert the water container and close the appliance door.
Follow the further instructions given in the display.
When Fill the water container with fresh tap water up to the descaling symbol appears in the display:
Carefully rinse the water container with clean water. Ensure that no descaling solution residue remains in the water container. Fill the water container to the marker with fresh tap water.
The descaling programme is finished at the end of the rinsing cycle and drinks can be made again.
To protect the machine and surrounding surfaces from damage, make sure you wipe up any spillages or splashes of descaling agent immediately.
75
Descaling the machine
Descaling when not prompted by a message
Touch
Main menu or .
Select
Maintenance
.
The descaling programme cannot be cancelled once you have touched OK.
The programme has to be completed through to the end.
Select
Descale
.
The descaling programme will begin.
76
Problem solving guide
Most problems that occur during daily use can be easily corrected. With the help of the following guide, you will be able to find the causes of problems and rectify them.
Important! Never open the casing of the appliance.
Unauthorised or incorrect repairs could cause personal injury or damage to the appliance.
Repairs should only be carried out by technicians approved by Miele.
If you can't remedy the problem yourself, please call Miele. Please note that a callout charge will be applied to unnecessary service visits where the problem could have been rectified as described in these operating instructions.
Messages in the display
Error messages must be confirmed with OK, otherwise the message can reappear in the display even though the problem has been remedied.
Follow the instructions which appear in the display to remedy the problem.
If the fault message appears in the display again, contact Miele.
Message
F1, F2, F3, F4,
F80, F81, F82, F83
F74, 77
F225, F226
F235, F236
Possible cause and remedy
There is a fault inside the appliance.
Switch the machine off with the On/Off sensor.
Wait for 1 hour before switching it back on again.
There is a fault inside the appliance.
Switch the machine off with the On/Off sensor.
Wait for 2 minutes before switching it back on again.
77
Problem solving guide
Message
F73 or
Check the brew unit
Possible cause and remedy
The brew unit cannot be positioned correctly, or it is dirty and the coffee cannot be processed.
Check whether you can remove the brew unit (see
"Cleaning and care - Brew unit").
Clean the brew unit if it can be removed (see
"Cleaning and care – Brew unit").
F227, F228, F229, F230
F233
Push the coffee ejector of the brew unit into the correct position (see diagram).
Push the waste container and the water container back in the machine. Do not insert the brew unit.
Close the door and switch the machine on with the
On/Off sensor.
This will initialise the brew unit motor and put it back into the start position.
When
Insert the brew unit appears in the display, open the door and refit all parts in the machine.
Close the door.
If the brew unit cannot be removed:
Switch the machine off with the On/Off sensor.
Wait for approx. 2 minutes before switching it back on again.
There is a fault with the automatic spout adjustment.
Confirm the message with
OK
.
Automatic spout adjustment during drink preparation is deactivated as long as the appliance remains switched on. You can continue to prepare drinks.
78
Problem solving guide
Message
F234
Too much ground coffee
Push the water container in until it engages
Possible cause and remedy
Cup protection switch-off has been activated three times since switching on the coffee machine. The cups or glasses being used are not recognised by the automatic spout adjustment.
Use suitable drinking vessels for automatic spout adjustment.
There is a fault with the automatic spout adjustment.
Switch the machine off with the On/Off sensor.
Wait for approx. 2 minutes before switching it back on again.
There is too much ground coffee in the coffee chute.
If more than one level scoop of ground coffee is added to the coffee chute, the brew unit cannot process the coffee. The ground coffee will be directed into the waste container and the fault message will appear in the display.
Switch the machine off with the On/Off sensor.
Remove and clean the brew unit (see "Cleaning and care – Brew unit").
Remove the ground coffee inside the coffee machine, e.g. with a vacuum cleaner.
Use the coffee spoon supplied to add ground coffee to the ground coffee chute. Add only one portion of ground coffee to the chute.
The water container is not in the correct position.
Remove the water container and push it back in again.
This fault message also appears if the water container was not correctly filled and fitted for descaling.
Fill the water container to the descaling symbol and restart the descaling programme.
79
Problem solving guide
Unusual performance of the coffee machine
Problem
The display remains dark when the coffee machine is switched on using the On/Off sensor.
The lighting remains off after the coffee machine is switched on.
The coffee machine switches off suddenly.
Possible cause and remedy
The On/Off sensor was not touched for long enough.
Touch the On/Off sensor for at least 3 seconds.
The plug is not correctly inserted into the socket.
Insert the plug into the socket correctly.
The mains fuse has tripped because the coffee machine, mains voltage or another appliance is defective.
Switch off at the wall socket and remove the plug.
Contact a qualified electrician or Miele.
The lighting has been switched off.
Switch the lighting on (see "Settings - Lighting").
The lamp needs to be replaced.
Call Miele.
The switch-off time programmed using the timer has been reached.
If required, you can select a new switch-off time
(see "Settings - Timer").
The plug is not correctly inserted into the socket.
Insert the plug into the socket correctly.
The coffee machine is switched on. The lighting switches off suddenly.
The sensors do not react to touch.
The appliance cannot be operated.
The lighting switches off 10 minutes after the coffee machine was last used.
There is a fault inside the appliance.
Open the appliance door.
The process currently running will be stopped.
Disconnect the electricity supply by switching off at the wall socket and withdrawing the plug, or switching off the mains circuit breaker.
80
Problem solving guide
Problem
The coffee machine does not switch itself on, although the Switch on at setting has been activated for the timer.
Possible cause and remedy
The system lock has been activated.
You need to deactivate the system lock (see
"Settings - System lock").
A day of the week has not been selected.
Check the timer settings and change them if required (see "Settings - Timer").
The machine was not used after being switched on automatically three times in succession.
Switch the machine on and dispense a drink.
The display brightness has been set too low.
Change this setting (see "Settings").
The display is hard to see or not able to be read.
Fill and replace the water container appears after switching on even though the container is filled and fitted in the machine. The appliance does not rinse.
Empty the drip tray appears in the display, even though the drip tray is empty.
The coffee machine needs descaling.
Switch the machine off with the On/Off sensor.
Wait approx. 1 hour.
Then switch the machine on again. As soon as
Heat-up phase appears in the display, touch
Maintenance
at the bottom right-hand corner and then select Descale .
Descale the coffee machine. You may need to repeat the descaling process.
The drip tray doesn't sit correctly in the appliance.
Push the drip tray all the way into the appliance.
The sensors on the drip tray are not working properly.
The contacts are dirty.
Clean the contacts and dry everything thoroughly
(see "Cleaning and care - Drip tray").
81
Problem solving guide
Problem
The machine door will not close.
The door is difficult to open and close.
Possible cause and remedy
The containers are not pushed all the way in.
Check the containers.
The door hinges are not correctly aligned.
Adjust the door hinges (see "Installation -
Adjusting the door hinges").
The cap on the central spout connector has either not been lubricated or is not lubricated sufficiently.
The coffee machine does not rinse itself when turned on.
Check the silicone cap for damage. If necessary, replace it with the extra cap supplied.
Lubricate the cap with the silicone grease supplied.
Lubricate the cap on the central spout connector regularly once a month.
This is not a fault.
If the coffee machine still has an operating temperature higher than 60 °C, rinsing will not take place.
82
Problem solving guide
Problem
When rinsing, no water or noticeably less water than usual runs out of the central spout.
No coffee or noticeably less coffee than usual is dispensed from the central spout. The display and the noise when coffee is being made remain the same.
There is noticeably more "coffee water" in the waste container.
The descaling programme was started by mistake.
Possible cause and remedy
The central spout is not fitted correctly.
Check whether the central spout has been assembled as described (see "Cleaning and care –
Central spout").
The cap is no longer securely fitted to the central spout connector (see "Guide to the appliance").
Check the cap on the central spout connector.
Lubricate the cap with the silicone grease supplied.
The cap on the central spout connector is damaged or missing.
Replace the cap with the extra cap supplied.
Lubricate the cap with the silicone grease supplied.
The descaling programme cannot be stopped once the OK sensor has been touched.
Descaling must be continued through to completion.
This is a safety precaution to make sure the machine is descaled correctly. This is important for the longevity and functional efficiency of your coffee machine.
Descale the coffee machine (see "Descaling").
Loud noises are heard during the descaling programme.
The display lights up but the coffee machine does not heat up and no drinks are made.
This is not a fault.
These noises occur when water is flushed through the machine at a high pressure.
The Demo mode of the coffee machine for Miele
Centers or Chartered Agents has been activated.
Deactivate the Demo mode (see "Settings - Demo mode").
83
Problem solving guide
Problem
The drinking vessel being used is repeatedly not recognised by the automatic spout adjustment.
The central spout lowers until it touches the top of the cup or glass and cup protection switch-off is activated.
Cup protection switchoff does not work. The central spout lowers until it touches the top of the vessel and the cleaning container or another vessel gets caught between the central spout and the drip tray.
Possible cause and remedy
The container is unsuitable for the cup sensing system.
Use cups or glasses that are suitable for automatic spout adjustment.
There is a fault with the automatic spout adjustment.
Switch the machine off with the On/Off sensor.
Wait for approx. 2 minutes before switching it back on again.
Use another drinking vessel and prepare a drink.
If cup protection switch-off is activated again or the central spout lowers until it touches the top of the cup or glass again, please contact Miele.
If the cleaning container is sitting too close to the panel behind the central spout, or even touches it, the rim of the container will not be properly recognised by the automatic spout adjustment.
Move the cleaning container forwards a little.
84
Problem solving guide
Unsatisfactory results
Problem
The coffee is not hot enough.
Possible cause and remedy
The cup has not been pre-heated.
The smaller the cup and the thicker its walls, the more important it is to pre-heat it.
Pre-heat the cup, for example, with hot water.
The brewing temperature has been set too low.
Set a higher brewing temperature (see "Brewing temperature").
The filters in the brew unit are blocked.
Remove and clean the brew unit by hand (see
"Cleaning and care – Brew unit").
Degrease the brew unit (see "Cleaning and care -
Brew unit").
The coffee machine needs descaling.
Descale the coffee machine.
The heating-up time is getting longer, the amount of water being dispensed is incorrect and the coffee machine is not performing properly.
Coffee is not being dispensed from both spouts evenly. Milk may be sputtering when being heated up.
The coffee grinder makes a louder noise than usual.
The coffee flows too quickly into the cup.
Coffee deposits in the central spout are obstructing dispensing.
Dismantle the central spout and clean the components – with the exception of the stainless steel cover – in the dishwasher (see "Cleaning and care – Central spout").
The central spout should be cleaned once a week.
The coffee bean container has become empty during the grinding process.
Fill the container with fresh beans.
There may be stones in amongst the coffee beans.
Switch the coffee machine off immediately. Call
Miele.
The coffee is too coarsely ground.
Set the grinder to a finer setting (see "Setting the coffee grinder").
85
Problem solving guide
Problem
The coffee trickles too slowly into the cup.
The crema on the coffee or espresso is not as it should be.
Possible cause and remedy
The coffee is too finely ground.
Set the grinder to a coarser setting (see "Setting the coffee grinder").
The grinder setting is not correct.
Set the grinder to a finer or coarser setting (see
"Setting the coffee grinder").
The brewing temperature is too high for this type of coffee.
Set a lower brewing temperature (see "Brewing temperature").
The coffee beans are no longer fresh.
Add fresh coffee beans to the coffee bean container.
Problems when heating up or frothing milk
Problem
The milk sputters when it is dispensed. Hissing noises can be heard when milk is being heated up or frothed.
Although the milk should be frothed, only hot milk is dispensed from the central spout.
Possible cause and remedy
The milk temperature is too high. Good milk froth can only be achieved when cold milk (< 10 °C) is used.
Check the temperature in the milk flask.
The milk flask has not been fitted correctly and so air as well as milk is being sucked in.
Push the milk flask in until it clicks into position.
The central spout is not fitted correctly.
Check whether the central spout has been assembled correctly.
The milk pipework in the milk flask lid is dirty.
Dismantle the milk flask lid and clean it with the cleaning brush (see "Cleaning and care – Milk flask").
Clean the central spout and the milk valve with the cleaning brush (see "Central spout" and
"Maintenance of the milk valve").
The angled connector is blocked and must be replaced.
Replace the angled connector (see "Replacing the angled connector").
86
Problem solving guide
Problem
Fill and insert milk flask appears in the display even though the milk flask has been filled and inserted in the machine.
Possible cause and remedy
The milk flask lid could be dirty. Therefore, the sensing mechanism doesn't function correctly.
Clean the milk flask lid and the milk flask thoroughly. Dismantle the lid and clean it with the cleaning brush supplied (see "Cleaning and care –
Milk flask and lid").
87
Problem solving guide
Replacing the angled connector
If, instead of being frothed, the milk is only being heated up, check the following first:
– Is the milk in the milk flask cold
(< 10 °C)?
– Have the central spout and the milk flask lid been cleaned carefully?
– Is the central spout correctly fitted?
If after checking the above, milk still cannot be frothed, replace the angled connector as follows.
You will need the replacement angled connector supplied with the coffee machine.
Do not use a needle or similar implement. This would damage the components.
First pull the air intake tube out of the opening . Then pull off the elbow connector .
Pull both tubes out of the elbow connector.
Clean the air intake tube under running water with the cleaning brush supplied. "Blowing through" can help to dislodge blockages.
Insert the brush in the milk tube .
Move the brush back and forth as far as possible until all milk residues have been removed.
Take the new angled connector (You can dispose of the old angled connector with normal household waste).
Open the service flap on the back of the appliance door.
88
Push the tubes onto the angled connector and fit it in the coffee machine. Make sure that the crosspiece on the angled connector is facing downwards.
Re-insert the air intake tube in the opening .
Replace the service flap and close the door.
Problem solving guide
89
After sales service and warranty
After sales service
In the event of a fault which you cannot correct yourself, please contact Miele.
The contact details for Miele are given at the back of these instructions.
When contacting Miele, please quote the model and serial number of your coffee machine.
These are visible on the data plate inside the machine.
Warranty
This appliance has a manufacturer's warranty period of 2 years.
For further information, please refer to your warranty booklet.
90
If the settings of the following functions are altered from the factory default, energy consumption will increase:
– Eco mode
– Lighting
– Time of day display
– Timer
Saving energy
91
Electrical connection
Before connecting the appliance to the mains supply, make sure that the connection data on the data plate corresponds to the voltage and frequency of the household supply. This data must correspond in order to avoid the risk of damage to the appliance.
Consult a qualified electrician if in any doubt.
The necessary connection information is given on the data plate inside your appliance.
Danger of injury! All electrical work should be undertaken by a suitably qualified and competent person.
Installation, repairs and other work by unqualified persons could be dangerous. Miele cannot be held liable for unauthorised work. Ensure power is not supplied to the appliance until after installation or repair work has been carried out. The appliance is supplied with a mains connection cable and plug for connection to AC 50 Hz, 230 V.
The fuse rating must be at least 16 A.
Connection should be made via a fused plug and suitable switched socket which is easily accessible after installation. If the mains socket is not accessible after the appliance has been built in, a separator for each terminal must be present. There must be an allpole contact gap of at least 3 mm in the switch (including switch, fuses and relays according to EN 60335).
Do not connect the machine to an inverter such as those used with an autonomous energy source e.g. Solar power. When switched on, peak loads in the system can cause the safety switch off mechanism to be triggered.
This can damage the electronic unit.
The machine must not be used with socalled energy saving plugs either.
These reduce the amount of energy supplied to the machine causing it to overheat.
92
Building-in and combination options
The appliance is designed to be built into a tall unit.
Installation
It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them. Exception: When built in above a warming drawer.
You can connect the warming drawer directly to the coffee machine with a special connection cable (optional accessory). This enables the warming drawer to be switched on at the same time as the coffee machine.
Only connect a Miele warming drawer to the coffee machine. You can find out the suitable warming drawers for this coffee machine by contacting Miele.
93
Installation
Ventilation
Condensate can damage the coffee machine or the housing unit.
The ventilation gaps given must be observed.
Do not cover or block the ventilation gaps.
Dust the ventilation gaps regularly.
Steam which is created when water is heated up can condense on the interior and the inside of the front of the coffee machine.
During installation, ensure there is sufficient ventilation at the rear of the appliance so that steam and warm air are able to escape without hindrance.
The housing unit should be configured as follows:
– A ventilation gap of at least 40 mm depth must be allowed for behind the appliance for air to circulate.
– The ventilation cross-sections in the plinth, housing unit and above the appliance must amount to at least
200 cm
2
to ensure that air can circulate without hindrance.
Top ventilation cross-section
The top ventilation cross-section can be achieved in various ways: a directly above the coffee machine with a ventilation grille (free air flow of at least 200 cm
2
) b in between the housing unit and the ceiling c through a suspended ceiling.
– Air intake occurs via the plinth at the bottom of the machine and the air escapes at the top at the rear of the housing unit.
94
Building in the coffee machine
Before installation make sure that there is no power supply to the machine. This also applies should it ever need to be taken out of its housing unit.
The machine may only be operated when built-in and in an ambient temperature range between +10 °C to +38 °C.
You will need two Allen keys (size 3 and 5) for installing the machine.
To align the machine front with the furniture front, ensure that there is a sealing strip provided all the way around the building-in niche or around the coffee machine.
If the housing unit niche is not fitted with a sealing strip, you should fit a
Miele sealing strip to the machine before installing it. This is fitted from the back of the machine.
The sealing strip is available to order from Miele.
Installation
Useful tip: We recommend providing a place to sit the coffee machine which is the same height as the building-in niche. This will make it easier to connect the machine to the electricity supply.
Using the large allen key, unscrew all four feet out by about 2 mm.
The feet can be unscrewed by up to approx. 10 mm.
Connect the appliance to the electricity supply.
Ensure the mains connection cable doesn't get damaged when pushing the appliance into the niche.
Push the coffee machine all the way into the building-in niche.
Check the height of the coffee machine to make sure that it is sitting centrally in the niche and that it is level. If this is not the case, realign the machine using the four feet.
95
Installation
The appliance comes with four M5 socket screws to help you align and secure it in the building-in niche.
Adjusting the door hinges
If the appliance door becomes difficult to open or close after installation, you can adjust the hinges to realign it
(TX 20):
Open the appliance door, and partially tighten the side socket screws.
Carefully turn the lower socket screws to centre the machine in the niche.
Tighten both upper socket screws by hand to secure the machine in the unit. Do not overtighten them.
Tighten the screw to align it flush with the furniture front.
Tighten the screw to align the door horizontally and vertically.
96
Copyright and licences
Miele utilises software for the operation and control of the appliance.
The copyright authorisation of Miele and other software providers (e.g. Adobe) is to be respected at all times.
Miele and its suppliers reserve all rights to software components.
The following actions are prohibited:
– Reproduction and distribution of the software,
– Generating modifications and derivative versions,
– Decompiling, reverse engineering, disassembling and other reductions of the software.
This product contains Adobe® Flash® Player Software under licence from Adobe
Systems Incorporated, Adobe Macromedia Software LLC. Adobe and Flash are registered trademarks of Adobe Systems Incorporated.
Components are integrated in the software which fall under GNU General Public
Licence and Open Source licences.
You can obtain an overview of the integrated Open Source components, along with a copy of the relevant licence, at www.miele.com/device-software-licences after entering your appliance's model code.
Miele can provide the source code for all components licenced under GNU
General Public Licence and comparable Open Source licences.
To obtain the relevant source code, please send an e-mail to [email protected].
97
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
Miele Experience Centre and
Head Office Melbourne:
1 Gilbert Park Drive
Knoxfield, VIC 3180
Miele Experience Centre South Melbourne:
206-210 Coventry Street
South Melbourne, VIC 3205
Miele Experience Centre and Office Sydney:
3 Skyline Place
Frenchs Forest, NSW 2086
Miele Experience Centre and Office Brisbane:
39 Harvey Street North
Eagle Farm, QLD 4009
Miele Experience Centre Gold Coast:
131 Ferry Road
Southport, QLD 4215
Miele Experience Centre and Office Adelaide:
83-85 Sir Donald Bradman Drive
Hilton, SA 5033
Miele Experience Centre and Office Perth:
205-207 Stirling Highway
Claremont, WA 6010
Miele New Zealand Limited
IRD 98 463 631
Head Office:
Level 2, 10 College Hill
Freemans Bay, Auckland 1011
Miele Experience Centre
Auckland:
8 College Hill
Freemans Bay, Auckland 1011
Telephone:
0800 464 353 (0800 4 MIELE) www.miele.co.nz
Miele Global Headquarters
Germany
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Federal Republic of Germany www.miele.com.au
CVA 6800
en – AU, NZ M.-Nr. 10 499 940 / 00
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
Electric 3400 W 48 L White
Grill Steam cooking Oven defrost function
Built-in display Control type: Touch
Frequently asked questions
To adjust the grinder setting, press the "Settings" button on the touch display, then select "Grinder setting" and adjust the setting to your desired level.
To create a User profile, press the "User profiles" button on the touch display, then select "Create profile" and follow the on-screen instructions.
The machine has an automatic cleaning and descaling program. To start the program, press the "Settings" button on the touch display, then select "Cleaning and descaling" and follow the on-screen instructions.