Milk Frother
/
GVAMF
Instruction Manual
Important Safety Instructions
Store this instruction manual in a safe place, along with your warranty card, purchase receipt and packaging box for future reference. Please pay particular attention to the safety information.
2
• WARNING: This appliance must be earthed.
• Do not immerse in water or other liquids. Danger of short-circuiting!
• Never operate damaged appliances (incl. mains cables).
• Do not place the appliance on a polished wood surface, it could damage the wood.
• Never touch live parts.
• Operate appliance only through a professionally installed socket supplying the correct voltage.
• Do not use extension cables.
• Never let main cable hang loose, nor remove plug with wet hands, nor lay or hang on hot surfaces, nor let it come into contact with oils.
• Unplug the appliance: after each use when the appliance is not in use before changing accessories or cleaning the appliance
• Do not touch the metal parts, the filter holder or its housing when the appliance is in use, as this may cause burns or scalding.
• Do not operate this appliance with a damaged cord or plug. If the supply cord is damaged, it must be replaced by manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
• This appliance conforms to directive 89/336 CEE regarding electromagnetic compatibility.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure they do not play with the milk frother.
• Do not operate outdoors.
• Do not operate without milk in the jug.
• THIS IS AN ATTENDED APPLIANCE.
• Turn the appliance and main power off when not in use.
• Never touch rotating parts. Risk of injury!
• By exceeding the filling capacity the jug may overflow.
• Appliance to be used only in conjunction with the basic unit provided.
• Never operate appliance on uneven surfaces.
• Use only fire blankets to extinguish fires on appliances.
• The appliance is not designed for commercial or industrial use; it is for household use only.
• Do not insert any objects and/or fingers in the appliance apertures.
• Disable appliances prior to disposal, cut off mains cable and take to an official refuse site.
3
Operation of your Milk Frother
4
• Unpack the box with care, keeping all the packaging materials until you are satisfied everything is present and in working order.
• Remove all packaging and foils and store it for later use. Check if the appliance has been delivered completely and that it is in perfect order.
• Before using the appliance for the first time please clean the jug and the accessories, as described under the chapter “Cleaning and Care” to remove dust or production residues.
Parts of your Milk Frother
1
Transparent Lid
2
Silicon Ring
3
Stainless steel housing
4
Plastic housing
5
Indicator lights
6
On Button
5
7
Marks for different function
6
8
Whisk for frothing milk
9
Whisk for heating milk
How to use your Milk Frother
7
1
2
3
1. Choose the appropriate whisk (Frothing & Heating / Heating) and set it inside
the jug.(See the function above for reference)
2. Pour the milk into the jug below the mark.(See the max capacity above for reference)
3. Insert the plug in a socket, press the button then the frother start to work and the blue light on. The frother will stop working automatically when the tem perature of the milk / milk foam reaches to around 65-70⁰C (the blue light off).
Caution! The frother can not be stopped or paused by pressing the button. If you cut off the power / lift the jug from the power base, it will start working again automatically when it is power on next time. You have to wait until the temperature of the milk / milk foam reaches to the target temperature and then the frother will stop working.
Hints and Tips
8
Here are some handy hints to help you get the best out of your frother.
• Always use your frother first to froth or heat your milk. While it is operating prepare your coffee or hot chocolate and serve immediately.
• Use whole milk (fat content >3.0%) for best results.
• Cold milk can be frothed with this frother. But it doesn’t mean you can cool down the milk with it. The frother works in normal temperature in this condition.
• Milk heats to approximately 70⁰C.This is the ideal temperature to ensure the flavor of your coffee is not impaired and so you don’t have to wait too long until you can start sipping on your drink.
• Keep the whisks in a safe place. They are small and can easily be lost.
• After frothing or heating allow 2 minutes for the thermostat to reset and the frother to be ready for use again. To shorten this time, rinse with water and wipe dry after each use.
• The frother is designed to heat and froth milk. If you add flavorings, coffee granules or hot chocolate powder in the frother ensure you thoroughly clean immediately after using.
Whisk Function Max capacity
Frothing & Heating
Heating
115ml
(a small amount of froth) 240ml
Time
80-90s
130-140s
Cleaning and Care
Remove the jug from the power point before cleaning. Separate the lid and the silicon ring from the jug. Never immerse the jug or the base into water.
1.
THE JUG: Clean immediately after each use. Flush and clean the walls using warm soapy water and a non-abrasive cloth. Then dry with a soft cloth.
2.
THE LID: To separate the lid and the silicon ring from the jug.
Washing out with water directly.
3.
4.
THE BODY: Clean with a soft cloth.Never use sharp cleaning agents, hard nylon brush or metal brush to avoid scratches on the stainless steel surface! Never clean with metal objects and never use abrasives.
THE WHISKS: Remove from the jug. Wash with warm water. Dry and store in a safe place. Do not use the dishwasher.
9
Technical Data
220-240 V ~ 50 Hz, 500 W
10
Notes
11