automatic milk frother
Instruction Manual
Item No. 34180
IMPORTANT SAFEGUARDS
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN FOR
FUTURE REFERENCE.
WARNING: This appliance must be earthed.
Do not immerse in water or other liquids. Danger of short-circuiting!
Never operate damaged appliances (incl. mains cables).
Do not place the appliance on a polished wood surface, it could
damage the wood.
Operate appliance only through a professionally installed socket
supplying the correct voltage.
Do not use extension cables.
Never let main cable hang loose, nor remove plug with wet hands, nor
lay or hang on hot surfaces, nor let it come into contact with oils.
Unplug the appliance: after each use when the appliance is not in use
before changing accessories or cleaning the appliance.
Do not touch the metal parts, the filter holder or its housing when the
appliance is in use, as this may cause burns or scalding.
Do not operate this appliance with a damaged cord or plug. If the
supply cord is damaged, it must be replaced by manufacturer, its
service agent or similarly qualified person in order to avoid a hazard.
Children should be supervised to ensure they do not play with the milk
frother.
Do not operate outdoors.
Do not operate without milk in the jug.
Turn the appliance and main power off when not in use.
Never touch rotating parts. Risk of injury!
By exceeding the filling capacity the jug may overflow.
Appliance to be used only in conjunction with the base unit provided.
Never operate appliance on uneven surfaces.
Use only fire blankets to extinguish fires on appliances.
The appliance is not designed for commercial or industrial use; it is for
household use only.
Do not insert any objects and/or fingers in the appliance apertures.
* Disable appliances prior to disposal, cut off mains cable and take to an
official refuse site.
* This appliance can be used by children aged from 8 years and above if
they have been given supervision or instruction concerning use of the
appliance in a safe way and if they understand the hazards involved.
Cleaning and user maintenance shall not be made by children unless
they are older than 8 and supervised. Keep the appliance and its cord
out of reach of children aged less than 8 years.
BEFORE FIRST USE
* Unpack the box with care, keeping all the packaging materials until you are satisfied
everything is present and in working order.
* Remove all packaging and foils and store it for later use. Check if the appliance has
been delivered completely and that it is in perfect order.
* Before using the appliance for the first time please clean the jug and the accessories,
as described under the chapter “Cleaning and Care” to remove dust or production
residues.
DESCRIPTION:
1. Transparent lid
2. Siliconering
3. Marks
For different functions
4. Jug: S/S housing
Non-stick coating inside
5. Indicator lights
6. On/Pause button
7. Power base with cord
9. Whisk for heating milk
WHISK FUNCTION MAX CAPACITY TIME
Frothing cold milk 250ml 65s
Frothing & Heating 250ml 110-130s
Heating 500ml 160-180s
(a small amount of froth)
. Choose the appropriate whisk and set it inside the jug.(See the function above for
reference)
2. Pour the milk into the jug below the mark.(See the max capacity above for reference)
3. Push the button to start the machine:
Frothing & Heating / Heating: Touch the button then the blue light and the red light
on at the same time. The red light keeps flashing for 30s and the blue light off after
finishing working.
Frothing cold milk: Pour the cold milk into the jug and push the button for 1-2 seconds
then the blue light will go on. After 65s the machine finishes working, the blue light
goes off and the red light keeps flashing for 30s.
Error status: The blue light keeps flashing. It means the machine works at an
overload. Cut off the power and pour out the milk (the milk level must be below the
max mark), then try to start again.
HINTS AND TIPS
HERE ARE SOME HANDY HINTS TO HELP YOU GET THE BEST OUT
OF YOUR FROTHER.
* Always use your frother first to froth or heat your milk. While it is operating prepare
your coffee or hot chocolate and serve immediately.
® Use whole milk (fat content >3.0%) for best results.
* Cold milk can be frothed with this frother. But it doesn't mean you can cool down the
milk with it. The frother works in normal temperature in this condition.
* Milk heats to approximately 60~70°C.This is the ideal temperature to ensure the
flavor of your coffee is not impaired and so you don't have to wait too long until you
can start sipping on your drink.
* Keep the whisks in a safe place. They are small and can easily be lost.
* After frothing or heating allow 2 minutes for the thermostat to reset and the
frother to be ready for use again. To shorten this time, rinse with water and wipe dry
after each use.
* The frother is designed to heat and froth milk. If you add flavorings, coffee granules
or hot chocolate powder in the frother ensure you thoroughly clean immediately
after using.
SERVING SUGGESTIONS
HERE IS A SELECTION OF QUICK AND EASY DRINKS YOU CAN MAKE
USING THE FROTHER.
WITH FROTHED MILK WITH HOT MILK
CAPPUCCINO CAFFE LATTE
1/3 espresso 1/3 espresso shot
Add 2/3 frothed milk Add 2/3 heated milk & stir
Top with cocoa powder
LATTE MACCHIATO HOT CHOCOLATE
Pour frothed milk into a tall glass
Add 2/3 frothed milk
Add espresso carefully along rim
Pour heated milk into a large mug
Add chocolate powder & stir to mix
of the glass
INSTANT MILKY COFFEE
INSTANT FROTHY COFFEE Place instant coffee granules in a cup
Make instant coffee Add hot milk & stir to mix
Add frothed milk
CLEANING AND CARE
REMOVE THE JUG FROM THE POWER BASE BEFORE CLEANING. TO
SEPARATE THE LID AND THE SILICON RING FROM THE JUG. NEVER
IMMERSE THE JUG OR THE BASE INTO WATER.
1. THE JUG: Clean immediately after each use. Flush and clean the walls using warm
soapy water and a non-abrasive cloth. Then dry with a soft cloth.
2. THE LID: To separate the lid and the silicon ring from the jug. Washing out with
water directly.
3. THE BODY: Clean with a soft cloth.Never use sharp cleaning agents, hard nylon
brush or metal brush to avoid scratches on the stain less steel surface! Never clean
with metal objects and never use abrasives.
4. THE WHISKS: Remove from the jug. Wash with warm water. Dry and store in a safe
place. Do not clean in a dishwasher.
5. Take out the power plug before cleaning.
6. Take out the spiral whisk or paddle, fill bits of water, use a small brush to clean the
gap under shaft sleeve of motor. Pour out the water after finishing cleaning.
7. Fix the spiral whisk, pour water into jug, water can’t exceed the max of stir, setting
cold frother as the state of milk frother , finished one time in one loop, 65s (time
has set.)
8. Use sponge or nonmetal soft brush to clean the inside and outside jug, then wipe
dry with rug.
9. When cleaning the jug, never immerse the jug into water in case of the water run
into the jug from bottom cover.
10. No parts can be cleaned in a dishwasher.
GENUINE
BRAND
Information on Waste Disposal for Consumers of Electrical & Electronic Equipment
This mark on a product and/or accompanying documents indicates that when it is to be disposed of, it must be
treated as Waste Electrical & Electronic Equipment (WEEE).
Any WEEE marked waste products must not be mixed with general household waste, but kept separate for the
treatment, recovery and recycling of the materials used.
For proper treatment, recovery and recycling; please take all WEEE marked waste to your Local
Authority Civic waste site, where it will be accepted free of charge.
If all consumers dispose of Waste Electrical & Electronic Equipment correctly, they will be helping
to save valuable resources and preventing any potential negative effects upon human health
and the environment, of any hazardous materials that the waste may contain.
Imported by BML L24 9WD Made in PR.C
">