Instructions for Use, Manual JURA IMPRESSA Z7 One Touch Voice

IMPRESSA Z7 One Touch Voice
Instructions for Use
The Instructions for Use has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.
Table of contents
Your IMPRESSA Z7 One Touch Voice
Control elements
4
Important information
6
Proper use ...................................................................................................................................................... 6
For your safety ............................................................................................................................................... 6
1 Preparing and using for the first time
9
JURA on the Internet ..................................................................................................................................... 9
Your IMPRESSA speaks ................................................................................................................................. 9
Setting up the machine ............................................................................................................................... 9
Filling the bean container ............................................................................................................................ 9
First-time use ................................................................................................................................................10
Activating the filter ......................................................................................................................................10
Deactivating the filter..................................................................................................................................12
Determining the water hardness .............................................................................................................. 13
Adjusting the grinder .................................................................................................................................. 13
Filling the water tank ...................................................................................................................................14
2 Preparation
15
Preparation using voice recognition .........................................................................................................15
Ristretto, espresso and coffee ....................................................................................................................16
Preparing two speciality coffees at the touch of a button ...................................................................17
Special coffee ................................................................................................................................................17
Latte macchiato, cappuccino .....................................................................................................................17
Warm milk and milk foam..........................................................................................................................18
Ground coffee ...............................................................................................................................................19
Permanently setting the amount of water for the cup size ................................................................20
Hot water .......................................................................................................................................................21
3 Daily operation
22
Switching on ................................................................................................................................................ 22
Daily maintenance ...................................................................................................................................... 22
Switching off ................................................................................................................................................ 23
4 Permanent settings in programming mode
24
Products ........................................................................................................................................................25
Setting the water hardness .......................................................................................................................28
Energy-saving mode ..................................................................................................................................28
Automatic switch-off ..................................................................................................................................29
Rinses ............................................................................................................................................................30
Rename ..........................................................................................................................................................31
Logo ............................................................................................................................................................... 32
Voice recognition......................................................................................................................................... 32
Voice output ................................................................................................................................................. 33
2
Table of contents
5
6
7
8
9
10
11
Restore factory settings .............................................................................................................................34
Viewing information and maintenance status ...................................................................................... 35
Unit for amount of water ........................................................................................................................... 35
Language ......................................................................................................................................................36
Maintenance
37
Rinsing the machine ................................................................................................................................... 37
Rinsing the cappuccino frother ................................................................................................................ 37
Cleaning the cappuccino frother ..............................................................................................................38
Dismantling and rinsing the cappuccino frother ..................................................................................39
Inserting and activating the filter.............................................................................................................39
Changing the filter ......................................................................................................................................40
Cleaning the machine ................................................................................................................................42
Descaling the machine ..............................................................................................................................43
Cleaning the bean container .....................................................................................................................45
Descaling the water tank ...........................................................................................................................46
Display messages
47
Troubleshooting
49
Transport and environmentally friendly disposal
51
Transport / Emptying the system..............................................................................................................51
Disposal..........................................................................................................................................................51
Technical data
52
Index
53
JURA contact details / Legal information
56
Symbol description
Warnings
JWARNING Always take note of any information marked with the words CAUTION or
JCAUTION WARNING and a warning sign. The signal word WARNING draws your attention to
potential serious injury, and the signal word CAUTION to potential minor injury.
CAUTION
CAUTION draws your attention to potential damage to the machine.
Symbols used
T
Prompt to take action. This symbol means that you are being prompted to
perform some action.
E
Information and tips to make it even easier to use your IMPRESSA.
ESPRESSO Display
3
Control elements
Control elements
1
2
3
4
5
6
7
4
Bean container cover
Water tank cover
Water tank
Power switch and mains cable (side view)
Height-adjustable cappuccino frother
Coffee grounds container
Drip tray
8
9
10
11
12
13
Grinder adjustment switch
Bean container with aroma preservation
cover
Filler funnel for ground coffee
Hot-water spout
Height- and width-adjustable coffee spout
Cup grille
Control elements
1
2
3
Q On/Off button
g Rotary Switch
c Maintenance button
4
5
6
7
8
9
10
11
12
z Milk button
q Latte Macchiato button
p Cappuccino button
e Special Coffee button
Display
m Hot Water button
u Ristretto button
i Espresso button
o Coffee button
5
Important information
Important information
Proper use
The machine is designed and intended for private domestic use. It
should only be used for coffee preparation and to heat milk and
water. Use for any other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsibility for the consequences of improper use.
Before using the machine read these instructions for use thoroughly
and completely and comply with the instructions they contain. A
warranty service is not applicable for damage or defects caused by
non-compliance with the instructions for use. Keep these instructions for use close to the machine and pass them on to the next user.
For your safety
J
Please carefully read and observe the important safety information
set out below.
To avoid danger of potentially fatal electric shock:
Never use a machine which is damaged or has a defective
mains cable.
In the event of signs of damage, for example if there is a smell
of burning, unplug the machine immediately from the mains
supply and contact JURA service.
If the mains cable of this machine is damaged, it must be
repaired either directly by JURA or by an authorised JURA service centre.
Make sure that the IMPRESSA and the mains cable are not
located close to hot surfaces.
Be careful to ensure that the mains cable is not trapped and
does not rub against sharp edges.
Never open and repair the machine yourself. Do not modify
the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there
is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original
spare parts and accessories.
U
U
U
U
U
U
6
Important information
U
To completely and safely disconnect the machine from the
power supply, first switch off the IMPRESSA using the On/Off
button and then at the power switch. Only then should you
remove the mains plug from the power socket.
There is a risk of scalds or burns on the spouts and the cappuccino
frother.
Place the machine out of the reach of children.
Do not touch any hot parts. Use the handles provided.
Ensure that the cappuccino frother is correctly fitted and
clean. If incorrectly fitted or if they become blocked, the cappuccino frother or its parts might come off.
U
U
U
A defective machine is not safe and could cause injury or fire. To
avoid damage and any associated risk of injury or fire:
Never allow the mains cable to loosely hang down. The mains
cable could pose a tripping hazard or become damaged.
Protect the IMPRESSA from environmental influences such as
rain, frost and direct sunlight.
Do not immerse the IMPRESSA, mains cable or connections in
water.
Do not put the IMPRESSA or any individual parts in the dishwasher.
Switch your IMPRESSA off at the power switch before any
cleaning operation. Always wipe the IMPRESSA with a damp
cloth rather than a wet one, and protect it from prolonged
exposure to water splash.
Only connect the machine to the mains voltage in accordance
with the information on the rating plate. The rating plate is
located on the underside of your IMPRESSA. Further technical
data is provided in these instructions for use (see Chapter 9
‘Technical data’).
Please only use original JURA maintenance products. Use of
products that are not explicitly recommended by JURA could
damage the IMPRESSA.
Do not use any coffee beans treated with additives or caramelised coffee beans.
Only fill the water tank with fresh, cold water.
U
U
U
U
U
U
U
U
U
7
Important information
U
Switch the machine off at the power switch if you are going to
be absent for a longer period of time.
People, including children, who
do not have the physical, sensory or mental capabilities to use
the machine safely or
are inexperienced or lack knowledge in how to use the
machine safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
U
U
Safety when handling the CLARIS Blue filter cartridge:
Filter cartridges should be kept out of the reach of children.
Store filter cartridges in a dry place in the sealed packaging.
Protect cartridges from heat and direct sunlight.
Do not use damaged filter cartridges.
Do not open filter cartridges.
U
U
U
U
U
8
1
1
Preparing and using for the first time
Preparing and using for the first time
JURA on the Internet
Visit us on the Internet. You can download short operating instructions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your
IMPRESSA and on every aspect of coffee.
Your IMPRESSA speaks
Is the bean container or water tank empty? Is the drip tray full? Your
IMPRESSA tells you what to do in these situations, e.g. ‘Please fill the
bean container.’ You can choose between voice output in German or
English, regardless of the set display language. In programming
mode, you can switch voice output on or off (see Chapter 4 ‘Permanent settings in programming mode – Voice output’).
Setting up the machine
When setting up your IMPRESSA, please note the following:
Place the IMPRESSA on a horizontal surface that is not sensitive to water.
Choose a spot for your IMPRESSA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
U
U
Filling the bean container
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
CAUTION
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use untreated coffee beans to fill the bean container.
T Open the bean container cover and remove the aroma preservation cover.
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
9
1
Preparing and using for the first time
First-time use
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLARIS filter
cartridge Blue. If the water hardness is 10° dH or more, we recommend using the filter cartridge. If you do not know the hardness of
your water, you can find this out first (see Chapter 1 ‘Preparing and
using for the first time – Determining the water hardness’).
J WARNING
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Precondition: The bean container has been filled.
T Insert the mains plug into a power socket.
3 T Switch on the IMPRESSA using the power switch on the lefthand side of the machine.
Q T Press the On/Off button to switch the IMPRESSA on.
The Rotary Switch lights up. SPRACHE DEUTSCH
appears on the display.
g T Turn the Rotary Switch until the required language is displayed, for example LANGUAGE ENGLISH.
k T Press the Rotary Switch to confirm the language.
CONFIRMED appears briefly on the display to confirm the
setting.
FILTER YES
E Now decide whether you want to operate your IMPRESSA with
or without a CLARIS Blue filter cartridge.
Activating the filter
CAUTION
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
INSERT FILTER / PRESS BUTTON, the Maintenance button c lights up.
10
1
Preparing and using for the first time
T Remove the water tank and rinse it with cold water.
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLARIS Blue filter cartridge.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
c
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
T Press the Maintenance button.
FILTER RINS., water flows out of the cappuccino
frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Maintenance button c, to continue with
rinsing of the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml.
SYSTEM FILLS, the system fills up with water. The operation stops automatically. WELCOME TO JURA appears
on the display.
UNIT IS HEATING
PRESS RINSE, the Maintenance button c lights up.
11
1
Preparing and using for the first time
c
T Empty the receptacle and place it under the coffee spout.
T Press the Maintenance button.
RINSING, the machine rinses. The operation stops automatically.
SELECT PRODUCT appears on the display. Your
IMPRESSA is ready for use.
Deactivating the filter
CAUTION
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
g T Turn the Rotary Switch until FILTER NO is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
HARDNESS 16°dH
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
g T Turn the Rotary Switch to adjust the water hardness.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
WATER TANK FILL
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
PRESS RINSE, the Maintenance button c lights up.
12
1
c
Preparing and using for the first time
T Place one receptacle under the hot-water spout and another
under the cappuccino frother.
T Press the Maintenance button.
SYSTEM FILLS, the system fills up with water. The operation stops automatically. WELCOME TO JURA appears
on the display.
UNIT IS HEATING
PRESS RINSE, the Maintenance button c lights up.
c
T Place a receptacle under the coffee spout.
T Press the Maintenance button.
RINSING, the machine rinses. The operation stops automatically.
SELECT PRODUCT appears on the display. Your
IMPRESSA is ready for use.
Determining the water
hardness
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
T Hold the test strip briefly (for 1 second) under flowing water.
Shake off the water.
T Wait for about 1 minute.
T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
Adjusting the grinder
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
CAUTION
If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is running.
The consistency of grind setting is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.
13
1
Preparing and using for the first time
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
T Open the cover of the bean container.
T Place a cup under the coffee spout.
i T Press the Espresso button.
The grinder starts up. 1 ESPRESSO and the coffee
strength are displayed.
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
T Close the cover of the bean container.
Filling the water tank
CAUTION
To enjoy the perfect cup of coffee we recommend changing the
water every day.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Open the water tank cover.
T Remove the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Close the water tank cover.
14
2 Preparation
2 Preparation
E You can stop preparation of a speciality coffee, speciality coffee with milk or hot water at any time. Just press any button.
E Before and during the grinding operation you can select the
coffee strength of individual products: extra-mild (ö), mild
(öö), normal (ööö), strong (öööö) or extra-strong
(ööööö).
E During preparation, you can change the preset amount of
water by turning the Rotary Switch.
E You can follow the current status of preparation on the
progress bar.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Products’).
Preparation using voice
recognition
You can initiate the preparation of coffee, latte macchiato and so on
simply by telling the machine what you want. Press the Rotary
Switch to activate voice recognition. As soon as the Rotary Switch
flashes blue, all you have to do is speak the name of the product and
preparation is started. In programming mode, you can switch voice
recognition on or off (see Chapter 4 ‘Permanent settings in programming mode – Voice recognition’).
E When the Rotary Switch lights up blue, voice recognition is
switched on.
You can prepare the following eight products using voice recognition:
‘Ristretto’
‘Espresso’
‘Kaffee’ (Coffee)
‘Spezial’ (for special coffee)
‘Cappuccino’
‘Latte macchiato’
‘Heisswasser’ (Hot water)
‘Milch’ (Milk)
U
U
U
U
U
U
U
U
15
2 Preparation
E Voice recognition remains activated for 1 minute. If no preparation is initiated during this time, voice recognition deactivates itself automatically.
E If voice recognition is activated, you can deactivate it at any
time by pressing the Rotary Switch.
Example: Proceed as follows to prepare one espresso using voice
recognition.
Precondition: COFFEE READY is displayed and the Rotary
Switch lights up blue.
T Place a cup under the coffee spout.
k T Press the Rotary Switch.
The Rotary Switch flashes blue and VOICE appears on the
display.
T Clearly say ‘espresso’ while VOICE is displayed.
E If the IMPRESSA did not understand the product name,
SORRY? appears on the display. Repeat the product name
as soon as VOICE is displayed again.
Preparation starts. 1 ESPRESSO and the coffee strength
is displayed. The preset amount of water for espresso flows
into the cup.
Preparation stops automatically. ENJOY appears briefly on
the display. Then COFFEE READY is displayed. Voice recognition is deactivated, the Rotary Switch lights up blue.
Ristretto, espresso and
coffee
Preparation of all speciality coffees (ristretto u, espresso i and
coffee o) follows this model.
Example: Proceed as follows to prepare one coffee.
T Place a cup under the coffee spout.
o T Press the Coffee button.
Preparation starts. 1 COFFEE and the coffee strength is
displayed. The preset amount of water for coffee flows into
the cup.
Preparation stops automatically and ENJOY appears
briefly on the display. Then COFFEE READY is displayed.
16
2 Preparation
Preparing two speciality
coffees at the touch of a
button
To prepare two cups of coffee: Place two cups under the coffee
spout. Press the Coffee o button twice (within two seconds), to
start coffee preparation.
Special coffee
Example: Proceed as follows to prepare one special coffee.
T Place a cup under the cappuccino frother.
e T Press the Special Coffee button.
Preparation starts. 1 SPECIAL and the coffee strength is
displayed. The preset amount of water for coffee flows into
the cup. Preparation stops automatically and ENJOY
appears briefly on the display. Then COFFEE READY is
displayed.
Latte macchiato,
cappuccino
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example: Proceed as follows to prepare one latte macchiato.
T Attach the milk pipe to the cappuccino frother. Use the long
pipe for a milk carton and the short pipe for the milk container.
T Insert the other end of the milk pipe into a milk carton or
connect it to a milk container.
T Place a glass under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam 5 position.
q T Press the Latte Macchiato button.
E If an energy-saving mode is set, the machine heats up first.
Press the Latte Macchiato button once more as soon as
COFFEE READY is displayed again.
1 LATTE MAC. and the coffee strength is displayed.
1 LATTE MAC. / 1 MILK, the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
1 LATTE MAC.
17
2 Preparation
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Products’).
1 LATTE MAC. / COFFEE, coffee preparation starts.
The preset amount of water flows into the cup. Preparation
stops automatically and ENJOY appears briefly on the display. Then COFFEE READY is displayed.
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the
cappuccino frother’).
Warm milk and milk
foam
Example: Proceed as follows to prepare milk foam.
T Attach the milk pipe to the cappuccino frother. Use the long
pipe for a milk carton and the short pipe for the milk container.
T Insert the other end of the milk pipe into a milk carton/bottle or connect it to the milk container.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam 5 position.
E If you want to heat the milk turn the setting wheel of the cappuccino frother to the Milk z position.
z
T Press the Milk button.
1 MILK, the milk foam is prepared. Preparation stops automatically and COFFEE READY appears on the display.
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the
cappuccino frother’).
18
2 Preparation
Ground coffee
You can choose a second coffee variety, for example decaffeinated
coffee, with the filler funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
E If you did not fill the machine with a sufficient amount of
ground coffee, PRE-GROUND / NOT ENOUGH is displayed and the IMPRESSA stops the operation.
E The desired speciality coffee must be prepared within approximately one minute after filling with the ground coffee.
Otherwise the IMPRESSA stops the operation and is once
more ready for use.
All speciality coffees with ground coffee are prepared following this
model.
Example: Proceed as follows to prepare an espresso using ground
coffee.
T Place an espresso cup under the coffee spout.
T Open the cover of the bean container.
T Open the cover of the filler funnel for ground coffee.
PRE-GROUND / FILL POWDER
T Place one level measuring spoon of ground coffee into the
filler funnel.
T Close the cover of the filler funnel for ground coffee.
PRE-GROUND / SELECT PRODUCT
i T Press the Espresso button.
Preparation will now begin. The preset amount of water for
espresso flows into the cup. Preparation stops automatically
and ENJOY appears briefly on the display. Then COFFEE
READY is displayed.
19
2 Preparation
Permanently setting the
amount of water for the
cup size
It is easy to make permanent settings for the amount of water for all
speciality coffees and hot water according to the cup size. Adjust the
amount once as shown in the following example. Every time you
prepare a drink in the future, this amount of water will be dispensed.
The permanent settings for adapting the amount of water to the cup
size for all speciality coffees and hot water follow this model.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition: COFFEE READY is displayed.
T Place a cup under the coffee spout.
o T Press and hold the Coffee button.
1 COFFEE and the coffee strength is displayed.
o T Hold the Coffee button down until ENOUGH? / PRESS
BUTTON appears.
o T Release the Coffee button.
Preparation starts and the coffee flows into the cup.
T Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops. CONFIRMED and ENJOY appear
briefly on the display. The set amount of water for one coffee is permanently stored. COFFEE READY appears on
the display.
E You can alter this setting at any time by repeating the above
procedure.
E You can also permanently set the amounts for all speciality
coffees, speciality coffees with milk and hot water in programming mode in the PRODUCTS programme item.
20
2 Preparation
Hot water
The following temperatures can be selected for preparing hot water:
low, normal, high.
J CAUTION
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
m
T Place a cup under the hot-water spout.
T Press the Hot Water button.
HOT WATER and the temperature is displayed.
E By touching the Hot Water button several times (within
approximately 2 seconds) you can set the temperature to
your individual preference. This setting is not saved.
Hot water flows into the cup. Preparation stops automatically and COFFEE READY appears on the display.
21
3
3
Daily operation
Daily operation
Switching on
When the IMPRESSA is switched on, it automatically prompts you
to perform the rinse operation. Start the rinse operation by pressing
the Maintenance button c. In programming mode you can change
this setting so that the machine starts the switch-on rinse automatically (see Chapter 4 ‘Permanent settings in programming mode –
Rinses’).
Precondition: Your IMPRESSA is switched on at the power switch.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the IMPRESSA on.
WELCOME TO JURA appears on the display.
UNIT IS HEATING
PRESS RINSE, the Maintenance button c lights up.
c
Daily maintenance
22
T Press the Maintenance button.
RINSING, the machine rinses.
The operation stops automatically. SELECT PRODUCT
appears on the display.
To ensure that you get many years of reliable service out of your
IMPRESSA and to guarantee the optimum coffee quality, the
machine requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
T Dry the metal contacts on the back of the drip tray.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the cappuccino frother (see Chapter 5
‘Maintenance – Dismantling and rinsing the cappuccino
frother’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
3
Switching off
Daily operation
When you switch your IMPRESSA off, the spouts used to prepare a
speciality coffee are rinsed.
T Place one receptacle under the coffee spout and another
under the cappuccino frother.
Q T Press the On/Off button.
GOODBYE, the spouts used to prepare a speciality coffee
or milk are rinsed. The operation stops automatically. Your
IMPRESSA is switched off.
E When the IMPRESSA is switched off with the On/Off button,
the machine consumes less than 0.01 W of standby energy.
The machine can be completely disconnected from the power
supply using the power switch.
23
4
Permanent settings in programming mode
4
Permanent settings in programming mode
You can make permanent settings in programming mode. You can
navigate through the programme items and permanently save the
required settings simply by turning and pressing the Rotary Switch.
You can make the following settings with the Rotary Switch:
Programme item
Sub-item
Explanation
MAINTENANCE
CAPPUCCINO CLEAN,
FILTER CHANGE (only if filter
is activated), MACHINE CLEAN,
CAPPUCCINO RINSING,
MACHINE DESCALE (only if
T Select the desired maintenance
programme.
If no action is taken in this
programme item, programming
mode is exited automatically after
approximately 5 seconds.
filter is not activated),
PRODUCTS
MACHINE RINSING
PRODUCT /
SELECT PRODUCT
FILTER
YES, NO
T Indicate whether you are
operating your IMPRESSA with or
without a CLARIS Blue filter
cartridge.
HARDNESS
NOT ACTIVE,
1°dH – 30°dH
T Adjust the water hardness.
SAVE NO,
SAVE LEVEL1,
SAVE LEVEL2
15 MIN, 30 MIN,
1 HRS – 15 HRS
T Select an energy-saving mode.
RINSES
START RINSE,
CAPPU. RINSE
T Change the settings for the
switch-on rinse and cappuccino
frother rinsing.
RENAME
PRODUCT NAME,
ON MESSAGE,
CLOSING
T Change the individual texts.
(only if filter is not
activated)
ENERGY
OFF AFTER
24
T Select your settings for speciality
coffees, milk specialities and hot
water.
T Set the time after which the
IMPRESSA should switch off
automatically.
4
Permanent settings in programming mode
Programme item
Sub-item
Explanation
LOGO
LOGO
T Select the logo to be displayed
when the graphic display is not
being used to display any other
information.
VOICE RECOG.
ACTIVE / NOT ACTIVE
T Select whether to activate
preparation using voice recognition.
When the Rotary Switch lights up
blue, voice recognition is switched
on.
VOICE OUTP.
ACTIVE / NOT ACTIVE,
ENGLISH / DEUTSCH,
nnnnlllm (Volume)
PRODUCT,
ALL PROD.,
RESET ALL,
EMPTY SYSTEM
T Change the settings for voice
output.
RESET
T Keep track of all prepared
products and view the maintenance status.
INFORMATION
SETTINGS
T Reset the permanently set values
of all products to the factory
settings.
T Select the unit for the amount of
water.
UNIT ML / OZ
LANGUAGE
T Select your language.
EXIT
T Exit programming mode.
Products
In the programme item PRODUCTS you can make individual settings for all speciality coffees, speciality coffees with milk and hot
water. The following permanent settings can be made:
Product
Temperature
Coffee strength
Amount
1 ristretto,
1 espresso,
1 coffee,
1 special coffee
LOW,
NORMAL,
HIGH
XMILD ö
MILD öö
NORMAL ööö
STRONG öööö
XSTRONG ööööö
Amount of water:
25 ML – 240 ML
25
4
Permanent settings in programming mode
Product
Temperature
2 ristretti,
2 espressi,
2 coffees
LOW,
NORMAL,
HIGH
LOW,
NORMAL,
HIGH
Latte macchiato,
cappuccino
Milk
Hot water
Coffee strength
–
Amount
Amount of water:
25 ML – 240 ML
(per cup)
–
LOW,
NORMAL,
X HIGH
XMILD ö
MILD öö
NORMAL ööö
STRONG öööö
XSTRONG ööööö
Amount of milk:
3 SEC – 120 SEC
Interval:
0 SEC – 60 SEC
Amount of water:
25 ML – 240 ML
–
3 SEC – 120 SEC
25 ML – 450 ML
–
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the amount of milk for a
latte macchiato from 16 SEC to 20 SEC, the interval from
30 SEC to 20 SEC and the amount of water from 45 ML to
40 ML.
Precondition: COFFEE READY is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until PRODUCTS is displayed.
k T Press the Rotary Switch to enter the programme item.
PRODUCT / SELECT PRODUCT
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To change the setting for a double product, press the corresponding symbol twice within 2 seconds.
q
T Press the Latte Macchiato button.
1 LATTE MAC. / COFFEE 45 ML
k T Press the Rotary Switch to enter the programme item.
1 LATTE MAC. / COFFEE 45 ML
26
4
Permanent settings in programming mode
g T Turn the Rotary Switch until 1 LATTE MAC. / COFFEE
40 ML is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
1 LATTE MAC. / COFFEE 40 ML
g T Turn the Rotary Switch until 1 LATTE MAC. / MILK
16 SEC is displayed.
k T Press the Rotary Switch to enter the programme item.
1 LATTE MAC. / MILK 16 SEC
g T Turn the Rotary Switch until 1 LATTE MAC. / MILK
20 SEC is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
1 LATTE MAC. / MILK 20 SEC
g T Turn the Rotary Switch until 1 LATTE MAC. / PAUSE
30 SEC is displayed.
k T Press the Rotary Switch to enter the programme item.
1 LATTE MAC. / PAUSE 30 SEC
g T Turn the Rotary Switch until 1 LATTE MAC. / PAUSE
20 SEC is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
1 LATTE MAC. / PAUSE 20 SEC
g T Turn the Rotary Switch until 1 LATTE MAC. / EXIT is
displayed.
k T Press the Rotary Switch to exit the programme item.
PRODUCT / SELECT PRODUCT
g T Turn the Rotary Switch until PRODUCT / EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
PRODUCTS
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
27
4
Permanent settings in programming mode
Setting the water
hardness
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to adjust the water hardness.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH. It can also be deactivated, which means that the
IMPRESSA will not let you know when it has to be descaled.
Precondition: SELECT PRODUCT is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until HARDNESS is displayed.
k T Press the Rotary Switch to enter the programme item.
HARDNESS
g T Turn the Rotary Switch to adjust the water hardness.
CONFIRMED appears briefly on the display.
HARDNESS
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Energy-saving mode
In the programme item ENERGY you can permanently set an
energy-saving mode (Energy Save Mode, E.S.M.©):
U
U
U
28
ENERGY SAVE NO
U Your IMPRESSA is constantly ready for use.
U All speciality coffees and speciality coffees with milk as well
as hot water can be prepared without having to wait.
ENERGY SAVE LEVEL1 (Energy saving of up to 30%)
U Your IMPRESSA is only constantly ready for use for speciality
coffees and hot water.
U The machine must heat up before milk preparation.
ENERGY SAVE LEVEL2 (Energy saving of up to 40%)
U Soon after the last preparation, the IMPRESSA stops heating
up. After about 5 minutes the message ENERGY ON is displayed.
U The machine must heat up before coffee, hot water or milk
preparation.
4
Permanent settings in programming mode
Example: Proceed as follows to change the energy-saving mode
from ENERGY SAVE NO to ENERGY SAVE LEVEL1.
Precondition: COFFEE READY is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until ENERGY is displayed.
k T Press the Rotary Switch to enter the programme item.
ENERGY SAVE NO
g T Turn the Rotary Switch until ENERGY SAVE LEVEL1 is
displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
ENERGY
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Automatic switch-off
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after the preset time following the last action on the machine.
You can set the automatic switch-off to 15 minutes, 30 minutes
or 1–15 hours.
Example: Proceed as follows to change the automatic switch-off
from 1 HRS to 15 MIN.
Precondition: SELECT PRODUCT is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until OFF AFTER 1 HRS is displayed.
k T Press the Rotary Switch to enter the programme item.
OFF AFTER 1 HRS
g T Turn the Rotary Switch until OFF AFTER 15 MIN is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
OFF AFTER 15 MIN
29
4
Permanent settings in programming mode
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Rinses
In the programme item RINSES you can make the following settings:
U
U
U
START RINSE MANUAL
U The switch-on rinse must be started manually.
START RINSE AUTO
U The switch-on rinse is started automatically.
CAPPU. RINSE AFTER 10 MIN
U You are prompted to perform a cappuccino rinse 10 minutes
after preparation of a speciality coffee with milk.
U
CAPPU. RINSE NOW
U You are prompted to perform a cappuccino rinse immediately after preparation of a speciality coffee with milk.
U
CAPPU. RINSE AUTO
U Cappuccino frother rinsing is automatically initiated 10 minutes after preparation of a speciality coffee with milk.
Example: Proceed as follows to make the machine prompt you to
perform cappuccino frother rinsing immediately after preparing a
speciality coffee with milk.
Precondition: SELECT PRODUCT is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until RINSES is displayed.
k T Press the Rotary Switch to enter the programme item.
START RINSE MANUAL
g T Turn the Rotary Switch until CAPPU. RINSE AFTER
10 MIN is displayed.
k T Press the Rotary Switch to enter the programme item.
CAPPU. RINSE AFTER 10 MIN
g T Turn the Rotary Switch until CAPPU. RINSE NOW is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
CAPPU. RINSE NOW
30
4
Permanent settings in programming mode
g T Turn the Rotary Switch until RINSES / EXIT is displayed.
k T Press the Rotary Switch.
RINSES
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Rename
You can change all product names, the welcome text and the closing text.
Example: Proceed as follows to change the product name from
1 COFFEE to MY COFFEE.
Precondition: COFFEE READY is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until RENAME is displayed.
k T Press the Rotary Switch to enter the programme item.
RENAME / PRODUCT NAME
E By turning the Rotary Switch you can select the welcome and
closing texts.
k T Press the Rotary Switch to enter the programme item.
PRODUCT NAME / CHANGE
k T Press the Rotary Switch.
PRODUCT NAME / SELECT PRODUCT
E Next select the button of the product you want to rename. No
product is prepared at this point.
o T Press the Coffee button.
1 COFFEE is briefly displayed.
_ / ABCDEFG...w
g T Turn the Rotary Switch to select the required character.
k T Press the Rotary Switch to confirm the character.
MY COFFEE / ABCDEFG...w
E To delete the last character entered, select the y symbol at the
end of the alphabet and press the Rotary Switch.
31
4
Permanent settings in programming mode
T Select the w symbol at the end of the alphabet and press the
Rotary Switch to confirm the entry.
CONFIRMED appears briefly on the display.
RENAME
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Logo
You can choose which logo is displayed when the display is not
being used to display any other information. The available logos
include:
JURA logo
Animated coffee cup
No logo (NOT ACTIVE)
U
U
U
Example: Proceed as follows to display the JURA logo.
Precondition: COFFEE READY is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until LOGO is displayed.
k T Press the Rotary Switch to enter the programme item.
LOGO
g T Turn the Rotary Switch until LOGO / JURA is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
LOGO / JURA
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY / JURA
Voice recognition
In this programme item you can switch voice recognition on or off.
Example: Proceed as follows to switch voice recognition off.
Precondition: SELECT PRODUCT is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until VOICE RECOG. is displayed.
32
4
Permanent settings in programming mode
k T Press the Rotary Switch to enter the programme item.
VOICE RECOG. ACTIVE
g T Turn the Rotary Switch until VOICE RECOG. NOT
ACTIVE is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
VOICE RECOG.
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Voice output
In the programme item VOICE OUTP. you can make the following settings:
U
U
NOT ACTIVE
ACTIVE
U ENGLISH / DEUTSCH
U nnnnlllm (Volume)
U If you activate voice output, you have to select the language
and volume too.
E If voice output is activated, messages are spoken once.
Example: Proceed as follows to switch voice output off.
Precondition: SELECT PRODUCT is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until VOICE OUTP. is displayed.
k T Press the Rotary Switch to enter the programme item.
VOICE OUTP. ACTIVE
g T Turn the Rotary Switch until VOICE OUTP.NOT
ACTIVE is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
VOICE OUTP.
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
33
4
Permanent settings in programming mode
Restore factory settings
In the programme item RESET you can reset various settings to
their factory settings:
U
PRODUCT
U The settings (amount of water, aroma, temperature etc.) for
any product can be reset individually to the factory settings.
The corresponding double product is also reset to the factory settings at the same time.
U
ALL PROD.
U The settings (amount of water, aroma, temperature etc.) for
all products are reset to the factory settings.
U
RESET ALL
U All user settings (apart from the ‘filter’) are reset to factory
settings. Your IMPRESSA then switches off.
Example: Proceed as follows to reset the values for ‘Espresso’ to the
factory settings.
Precondition: COFFEE READY is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until RESET is displayed.
k T Press the Rotary Switch to enter the programme item.
RESET / PRODUCT
k T Press the Rotary Switch to enter the programme item.
RESET / SELECT PRODUCT
i T Press the Espresso button.
CONFIRMED appears briefly on the display and the settings for ‘Espresso’ are reset to the factory setting.
RESET / PRODUCT
g T Turn the Rotary Switch until RESET / EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
RESET
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
34
4
Viewing information and
maintenance status
Permanent settings in programming mode
In the programme item INFORMATION you can view the following information:
Number of prepared coffee speciality coffees, speciality coffees with milk and hot water
Maintenance status and number of maintenance programmes
performed (cleaning, descaling, changing the filter)
Number of cappuccino frother cleaning operations performed
Software version
U
U
U
U
Precondition: COFFEE READY is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until INFORMATION is displayed.
k T Press the Rotary Switch to enter the programme item.
TOTAL, the total number of prepared speciality coffees
and speciality coffees with milk is displayed.
g T Turn the Rotary Switch to view additional information.
E The maintenance status can also be displayed in addition to
the number of performed maintenance programmes. The bar
shows the current maintenance status. When the bar is completely filled, your IMPRESSA will request the respective maintenance programme.
k T Press the Rotary Switch to exit the programme item.
INFORMATION
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Unit for amount of water
You can change the unit for the amount of water from ‘ml’ to ‘oz’.
Example: Proceed as follows to change the unit for the amount of
water from ML to OZ.
Precondition: COFFEE READY is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until SETTINGS / UNIT ML is
displayed.
35
4
Permanent settings in programming mode
k T Press the Rotary Switch to enter the programme item.
SETTINGS / UNIT ML
g T Turn the Rotary Switch until UNIT OZ is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
SETTINGS / UNIT OZ
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Language
In this programme item you can set the language of the display
messages on your IMPRESSA.
Example: Proceed as follows to change the language from
ENGLISH to DEUTSCH.
Precondition: COFFEE READY is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until LANGUAGE ENGLISH is
displayed.
k T Press the Rotary Switch to enter the programme item.
LANGUAGE ENGLISH
g T Turn the Rotary Switch until SPRACHE DEUTSCH is displayed.
k T Press the Rotary Switch to confirm the setting.
GESPEICHERT appears briefly on the display.
SPRACHE DEUTSCH
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
36
5
5
Maintenance
Maintenance
Your IMPRESSA has the following integrated maintenance programmes:
Cleaning the cappuccino frother
Rinsing the cappuccino frother
Changing the filter
Cleaning the machine
Rinsing the machine
Descaling the machine
U
U
U
U
U
U
E Clean or descale the machine or change the filter when the
display prompts you to do so.
Rinsing the machine
You can initiate the rinse operation manually at any time.
Precondition: COFFEE READY is displayed.
T Place a receptacle under the coffee spout.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
k T Press the Rotary Switch to enter the programme item.
CAPPUCCINO CLEAN
g T Turn the Rotary Switch until MACHINE RINSING is displayed.
k T Press the Rotary Switch to initiate the rinse operation.
RINSING
The rinse stops automatically and COFFEE READY
appears on the display.
Rinsing the cappuccino
frother
Depending on the setting in programming mode, the IMPRESSA
prompts you to rinse the milk system or automatically performs
rinsing following milk preparation.
Example: Proceed as follows to rinse the milk system when
prompted to do so.
Precondition: COFFEE READY / CAPPU RINSE is displayed
and the Maintenance button c lights up.
37
5
Maintenance
c
T Place a receptacle under the cappuccino frother.
T Press the Maintenance button.
CAPPUCCINO RINSING, the cappuccino frother is
rinsed.
COFFEE READY
Cleaning the cappuccino
frother
CAUTION
To ensure that the cappuccino frother always works properly, you
should clean it daily when you have been preparing milk. Your
IMPRESSA will not prompt you to clean the cappuccino frother.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA Cappuccino Cleaner is available from specialised dealers.
Precondition: COFFEE READY is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
k T Press the Rotary Switch to enter the programme item.
CAPPUCCINO CLEAN
k T Press the Rotary Switch.
c
38
CLEANER FOR CAPPUCCINO / PRESS BUTTON
T Pour 250 ml of fresh water into a receptacle and add one
capful (max. 15 ml) of Cappuccino Cleaner.
T Immerse the milk pipe in the receptacle.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam 5 or Milk t position.
T Place another receptacle under the cappuccino frother.
T Press the Maintenance button.
CAPPUCCINO CLEANING, the cappuccino frother and
the pipe are cleaned.
WATER FOR CAPPUCCINO / PRESS BUTTON
T Rinse the receptacle thoroughly, fill it with 250 ml of fresh
water and immerse the milk pipe in the water.
5
c
Dismantling and rinsing
the cappuccino frother
Maintenance
T Empty the other receptacle and place it under the cappuccino frother again.
T Press the Maintenance button.
CAPPUCCINO CLEANING, the cappuccino frother and
the pipe are rinsed with fresh water.
COFFEE READY appears on the display.
T Carefully pull the cappuccino frother down and off.
T Dismantle the frother into its individual parts.
T Rinse all frother parts thoroughly under running water.
T Reassemble the cappuccino frother.
E Ensure that all individual parts are correctly and firmly connected to ensure correct operation of the cappuccino frother.
T Firmly attach it to the connector.
Inserting and activating
the filter
Your IMPRESSA no longer has to be descaled if you are using the
CLARIS Blue filter cartridge. If the water hardness is 10° dH or more,
we recommend using the filter cartridge. If you do not know the
hardness of your water, you can find this out first (see Chapter 1 ‘Preparing and using for the first time – Determining the water hardness’).
If you did not activate the filter cartridge the first time you used the
machine, you can do this now as follows.
E Perform the ‘inserting the filter’ operation without any interruptions. This will ensure that your IMPRESSA always produces
its best.
Precondition: SELECT PRODUCT is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears on the display.
g T Turn the Rotary Switch until FILTER is displayed.
k T Press the Rotary Switch to enter the programme item.
FILTER NO
g T Turn the Rotary Switch until FILTERYES is displayed.
39
5
Maintenance
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
INSERT FILTER / PRESS BUTTON, the Maintenance button c lights up.
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLARIS Blue filter cartridge.
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
c
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
T Press the Maintenance button.
FILTER RINS., water flows out of the cappuccino
frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Maintenance button c, to continue with
rinsing of the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml. SELECT PRODUCT appears on the display. The
filter is now activated.
Changing the filter
40
E After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
E If the CLARIS Blue filter cartridge is not activated in programming mode, you will not be prompted to change the filter.
5
Maintenance
Precondition: COFFEE READY / FILTER CHANGE is displayed and the Maintenance button c lights up.
c T Press the Maintenance button.
CHANGE TIME 20 MIN / START YES
E If you do not want to start changing the filter just yet, turn the
Rotary Switch until CHANGE / START NO is displayed.
Press the Rotary Switch to exit the maintenance programme.
The prompt to ‘change the filter’ remains active.
c
c
T Press the Maintenance button.
CHANGE FILTER / PRESS BUTTON
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge and filter extension.
T Fit the filter extension on top of a new filter cartridge.
T Insert the filter cartridge into the water tank, exerting slight
pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
T Turn the setting wheel of the cappuccino frother to the
Steam position n.
T Press the Maintenance button.
FILTER RINS., water flows out of the frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Maintenance button c, to continue with
rinsing of the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately 500 ml.
The IMPRESSA heats up and is once more ready for use.
41
5
Maintenance
Cleaning the machine
CAUTION
After 220 preparations or 80 switch-on rinses, the IMPRESSA will
prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E The cleaning programme lasts approximately 20 minutes.
E Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
E JURA cleaning tablets are available from specialised dealers.
Precondition: COFFEE READY / CLEAN is displayed and the
Maintenance button c lights up.
c T Press the Maintenance button.
CLEANING TIME 20 MIN / START YES
E If you do not want to start cleaning just yet, turn the Rotary
Switch until CLEANING / START NO is displayed. Press
the Rotary Switch to exit the maintenance programme. The
prompt to ‘clean the machine’ remains active.
c
c
42
T Press the Maintenance button.
TRAY / EMPTY
T Empty the drip tray and coffee grounds container and put
them back into the machine.
PRESS BUTTON, the Maintenance button c lights up.
T Place one receptacle under the coffee spout and another
under the cappuccino frother.
T Press the Maintenance button.
MACHINE IS CLEANING, water flows out of the coffee
spout.
The operation is interrupted, ADD TABLET.
T Open the cover of the bean container.
T Open the cover of the filler funnel for ground coffee.
5
c
Descaling the machine
Maintenance
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel and the cover of the bean
container.
PRESS BUTTON, the Maintenance button c lights up.
T Press the Maintenance button.
MACHINE IS CLEANING, water flows repeatedly out
of the coffee spout and the cappuccino frother.
The operation is interrupted, TRAY / GROUNDS EMPTY.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Cleaning is now complete. The IMPRESSA is once more
ready for use.
The IMPRESSA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of
calcification depends on the hardness of your water.
J CAUTION
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off descaling agent with clean water. Should you get any
descaling agent in your eye, see a doctor.
CAUTION
If the wrong descaling agent is used, the machine could be damaged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
CAUTION
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
CAUTION
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T Clean up any splashes immediately.
E The descaling programme lasts approximately 45 minutes.
E JURA descaling tablets are available from specialised dealers.
E If you use a CLARIS Blue filter cartridge and this is activated,
you will not be prompted to descale.
43
5
Maintenance
Precondition: COFFEE READY / DESCALE is displayed and
the Maintenance button c lights up.
c T Press the Maintenance button.
DECALCIFYING TIME 45 MIN / START YES
E If you do not want to start descaling just yet, turn the Rotary
Switch until DECALCIFYING / START NO is displayed.
Press the Rotary Switch to exit the maintenance programme.
The prompt to ‘descale the machine’ remains active.
c
T Press the Maintenance button.
TRAY / GROUNDS EMPTY
T Empty the drip tray and coffee grounds container and put
them back into the machine.
SOLVENT IN TANK
c
T Remove and empty the water tank.
T Completely dissolve the contents of one blister (3 JURA descaling tablets) in a receptacle holding 600 ml of water. This
may take several minutes.
T Pour the solution into the empty water tank and insert it into
the machine.
SOLVENT IN TANK / PRESS BUTTON, the Maintenance button c lights up.
T Remove the cappuccino frother.
T Place one receptacle under the hot-water spout and another
under the connector of the cappuccino frother.
T Press the Maintenance button.
MACHINE IS DECALCIFYING
Water flows out of the hot-water spout and the connector of
the cappuccino frother. The Maintenance button flashes
during the descaling operation.
The operation stops automatically, TRAY / GROUNDS
EMPTY.
T Empty the receptacles from under the hot-water spout and
the connector of the cappuccino frother.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
WATER TANK FILL
44
5
c
Maintenance
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
PRESS BUTTON, the Maintenance button c lights up.
T Refit the cappuccino frother.
T Place one receptacle under the hot-water and coffee spout
and another under the cappuccino frother.
T Press the Maintenance button.
MACHINE IS DECALCIFYING, water flows out of
the cappuccino frother and the hot-water spout.
UNIT IS HEATING, RINSING, water flows out of the
coffee spout.
The operation stops automatically, TRAY / GROUNDS
EMPTY.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. The IMPRESSA heats up and is
once more ready for use.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
Cleaning the bean
container
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
Precondition: COFFEE READY / FILL BEANS is displayed.
k T Switch the machine off with the On/Off button.
3 T Switch the machine off at the power switch.
T Open the bean container cover and remove the aroma preservation cover.
T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
45
5
Maintenance
Descaling the water tank
46
Limescale deposits may form in the water tank. To ensure correct
function of the machine, descale the water tank from time to time.
T Remove the water tank.
T If you use a CLARIS Blue filter cartridge, remove this.
T Descale the tank with a mild conventional descaling agent
in accordance with the manufacturer's instructions.
T Rinse out the water tank thoroughly.
T If you use a CLARIS Blue filter cartridge, insert this again.
T Fill the water tank with fresh, cold water and reinsert the
tank.
6 Display messages
6 Display messages
Message
Cause/Result
Action
WATER TANK FILL
The water tank is empty.
You cannot prepare any
products.
T Fill the water tank (see
Chapter 1 ‘Preparing and using
for the first time – Filling the
water tank’).
GROUNDS EMPTY
The coffee grounds container is
full.
You cannot prepare any
speciality coffees, but you can
prepare hot water and milk.
T Empty the coffee grounds
container and the drip tray.
TRAY EMPTY
The drip tray is full.
You cannot prepare any
products.
T Empty the drip tray.
T Clean and dry the metal
contacts on the back of the drip
tray.
TRAY MISSING
The drip tray is not inserted
T Fit the drip tray.
correctly or is not inserted at all.
You cannot prepare any
products.
COFFEE TRAY
MISSING
The coffee grounds container is
not inserted correctly or is not
inserted at all.
You cannot prepare any
products.
T Fit the coffee grounds
container.
PRESS RINSE
The IMPRESSA is prompting
you to perform a rinse or
continue a maintenance
programme that was already
started.
T Press the Maintenance button
to start the rinse or to continue
the maintenance programme.
COFFEE READY /
FILL BEANS
The bean container is empty.
You cannot prepare any
speciality coffees, but you can
prepare hot water and milk.
T Fill the bean container (see
Chapter 1 ‘Preparing and using
for the first time – Filling the
bean container’).
COFFEE READY /
CAPPU RINSE
The IMPRESSA requests a
cappuccino rinse.
T Press the Maintenance button
to start the cappuccino rinse.
47
6 Display messages
Message
Cause/Result
Action
POWDERFUNNEL
The filler funnel for ground
coffee is not inserted.
T Fit the filler funnel for ground
coffee.
COFFEE READY /
CLEAN or CLEAN
(flashing), CLEAN NOW /
CLEAN (flashing)
COFFEE READY /
DESCALE or DESCALE
The IMPRESSA is prompting
you to clean it.
T Perform cleaning (see
Chapter 5 ‘Maintenance –
Cleaning the machine’).
The IMPRESSA is prompting
you to descale it.
T Perform descaling (see
Chapter 5 ‘Maintenance –
Descaling the machine ’).
The filter cartridge no longer
works.
T Replace the CLARIS Blue filter
cartridge (see Chapter 5
‘Maintenance – Changing the
filter’).
The aroma preservation cover is
not inserted correctly or is not
inserted at all.
You cannot prepare any
speciality coffees, but you can
prepare hot water and milk.
T Fit the aroma preservation
cover.
PRE-GROUND /
NOT ENOUGH
There is insufficient ground
coffee in the machine; the
IMPRESSA stops the operation.
T The next time you prepare a
beverage, add more ground
coffee (see Chapter 2 ‘Preparation – Ground coffee’).
SORRY?
The IMPRESSA did not understand the product name.
T Repeat the product name as
soon as VOICE is displayed
again.
NOICE LEVEL TOO
LOUD
Voice recognition is affected by
loud background noise. The
IMPRESSA deactivates voice
recognition.
T Reduce the background noise.
Then activate voice recognition
again.
(flashing),
DESCALCIFY NOW /
DESCALE (flashing)
COFFEE READY /
FILTER CHANGE or
FILTER CHANGE
(flashing), CHANGE
NOW / FILTER
CHANGE (flashing)
BEANCOVER /
MISSING
48
7
7
Troubleshooting
Troubleshooting
Problem
Cause/Result
Action
Insufficient foam is
produced when the milk is
frothed or milk sprays
from the cappuccino
frother.
The cappuccino frother is
dirty.
T Rinse and clean the cappuccino
frother (see Chapter 5 ‘Maintenance – Rinsing the cappuccino
frother’).
Coffee only comes out in
drips when it is being
prepared.
Coffee or ground coffee
has been ground too
finely and is blocking the
system.
T Put the grinder on a coarser setting
or use coarser ground coffee (see
Chapter 1 ‘Preparing and using for the
first time – Adjusting the grinder’).
Water hardness cannot be
adjusted.
The CLARIS Blue filter
cartridge is activated.
T Deactivate the filter cartridge in
programming mode.
COFFEE READY /
FILL BEANS is not
The bean monitor is dirty.
T Clean the bean container (see
Chapter 5 ‘Maintenance – Cleaning the
bean container’).
The metal contacts of the
drip tray are dirty or wet.
T Clean and dry the metal contacts on
the back of the drip tray.
The water tank float is
trapped.
T Descale the water tank (see
Chapter 5 ‘Maintenance – Descaling
the water tank’).
Grinder is making a very
loud noise.
There are foreign objects
in the grinder.
T Contact customer support in your
country (see Chapter 11 ‘JURA contact
details / Legal information’).
ERROR 2 is displayed.
If the machine was
exposed to the cold for a
long period of time,
heating is disabled for
safety reasons.
T Warm the machine at room temperature.
displayed although the
bean container is empty.
TRAY EMPTY
is always displayed.
WATER TANK FILL
is displayed although the
water tank is full.
Other ERROR messages
are displayed.
–
T Contact customer support in your
country (see Chapter 11 ‘JURA contact
details / Legal information’).
49
7
Troubleshooting
Problem
Cause/Result
Action
Little or no water or steam
comes out of the cappuccino frother. The pump is
very quiet.
The connector of the
cappuccino frother may
be blocked by milk
residues or limescale
fragments loosened
during descaling.
T Remove the cappuccino frother.
T Unscrew the black connector with
the aid of the hexagonal hole on the
measuring spoon for ground coffee.
T Clean the connector thoroughly.
T Screw the connector back on by
hand.
T Carefully tighten it using the
hexagonal hole on the measuring
spoon, turning by no more than a
quarter of a rotation.
E If you were unable to solve the problem, contact customer
support in your country (see Chapter 11 ‘JURA contact details /
Legal information’).
50
8
8
Transport and environmentally friendly disposal
Transport and environmentally friendly disposal
Transport / Emptying the
system
In order to protect the IMPRESSA from frost during transport, the
system must be emptied.
Precondition: COFFEE READY is displayed.
k T Press and hold the Rotary Switch until MAINTENANCE
appears.
g T Turn the Rotary Switch until RESET is displayed.
k T Press the Rotary Switch to enter the programme item.
RESET / PRODUCT
g T Turn the Rotary Switch until RESET / EMPTY SYSTEM
is displayed.
k T Press the Rotary Switch.
WATER TANK EMPTY
c
Disposal
T Remove the water tank.
PRESS RINSE, the Maintenance button c lights up.
T Place one receptacle under the hot-water spout and another
under the cappuccino frother.
T Press the Maintenance button.
EMPTYING, a small amount of water flows out of the hotwater spout and the cappuccino frother. The operation stops
automatically and your IMPRESSA switches off.
Please dispose of old machines in an environmentally neutral way.
H
Old machines contain valuable, recyclable materials which should
be recycled. Please therefore dispose of old machines via suitable
collection systems.
51
9 Technical data
9 Technical data
52
Voltage
220–240 V ~, 50 Hz
Power
1350 W
Safety test
S
Energy consumption SAVE NO
Approx. 23 Wh
Energy consumption SAVE LEVEL1
Approx. 16 Wh
Energy consumption SAVE LEVEL2
Approx. 6 Wh
Pump pressure
Static, max. 15 bar
Holding capacity of water tank
2.8 l
Holding capacity of bean container
280 g
Holding capacity of coffee grounds
container
Max. 20 portions
Cable length
Approx. 1.1 m
Weight
13.8 kg
Dimensions (W × H × D)
31 × 37 × 45 cm
Index
10
Index
A
Consistency of grind
Adjusting the grinder 13
Grinder adjustment switch 4
Contact details 56
Cover
Bean container 4
Water tank 4
Cup grille 4
Customer support 56
Addresses 56
Aroma preservation cover
Bean container with aroma preservation
cover 4
Automatic switch-off 29
B
Bean container
Bean container with aroma preservation
cover 4
Cleaning 45
Filling 9
Bus bar
Technical data 52
Button
Cappuccino button 5
Coffee button 5
Espresso button 5
Hot Water button 5
Latte Macchiato button 5
Maintenance button 5
Milk button 5
On/Off button 5
Ristretto button 5
Special Coffee button 5
D
Descaling
Machine 43
Water tank 46
Display 5
Display messages 47
Disposal 51
Drip tray 4
E
Emptying the system 51
Energy-saving mode 28
Errors
Troubleshooting 49
Espresso 16
F
Factory settings
Restore factory settings 34
Filler funnel
Filler funnel for ground coffee 4
Filling
Bean container 9
Water tank 14
Filter
Changing 40
Inserting and activating the filter 39
First-time use 10
Frother
Cappuccino frother 4
C
Cappuccino 17
Cappuccino frother
Cleaning 38
Rinsing 37
CLARIS Blue filter cartridge
Changing 40
Inserting and activating the filter 39
Cleaning
Bean container 45
Cappuccino frother 38
Machine 42
Coffee 16
Coffee grounds container 4
Coffee spout
Height- and width-adjustable coffee
spout 4
G
Ground coffee 19
H
Hotline 56
Hot water 21
Hot-water spout 4
53
Index
Programming mode 24
Automatic switch-off 29
Energy-saving mode 28
Language 36
Logo 32
Products 25
Restore factory settings 34
Rinses 30
Setting the water hardness 28
Unit for amount of water 35
Proper use 6
I
Instant coffee
Ground coffee 19
Internet 9
J
JURA
Contact details 56
Internet 9
L
Language 36
Latte macchiato 17
M
Machine
Cleaning 42
Descaling 43
Rinsing 37
Setting up 9
Switching off 23
Switching on 22
Mains cable 4
Maintenance
Daily maintenance 22
Maintenance 37
Messages, display 47
Milk foam 18
Milk, warm 18
R
Rinses 30
Rinsing
Cappuccino frother 37
Machine 37
Ristretto 16
Rotary Switch 5
S
Safety 6
Safety information 6
Settings
Permanent settings in programming
mode 24
Setting up
Setting up the machine 9
Short operating instructions 9
Special coffee 17
Spout
Hot-water spout 4
Switching off
Machine 23
Voice output 33
Voice recognition 32
Switching on
Machine 22
Voice output 33
Voice recognition 32
Switch-off
Automatic switch-off 29
Symbol description 3
P
Permanently setting the water for the
cup size 20
Permanent settings in programming
mode 24
Power switch 4
Preparation 15, 17
Cappuccino 17
Coffee 16
Espresso 16
Ground coffee 19
Hot water 21
Latte macchiato 17
Milk 18
Ristretto 16
Special coffee 17
Using voice recognition 15
Problems
Troubleshooting 49
54
T
Technical data 52
Tel 56
Transport 51
Troubleshooting 49
Index
U
Unit for amount of water 35
Use, First-time 10
V
Voice output 9
Switching off 33
Switching on 33
Voice recognition 15
Switching off 32
Switching on 32
W
Warm milk 18
Water hardness
Determining the water hardness 13
Setting the water hardness 28
Water tank 4
Descaling 46
Filling 14
Website 9
55
Art. 69788/Z7 Voice/en/201107
11 JURA contact details / Legal information
11 JURA contact details / Legal information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. +41 (0)62 38 98 233
@ You will find additional contact details for your country at
www.jura.com.
Directives
The machine complies with the following directives:
2006/95/EC – Low Voltage Directive
2004/108/EC – Electromagnetic Compatibility
2009/125/EC – Ecodesign Directive
U
U
U
Technical changes
56
We reserve the right to make technical changes. The diagrams used
in these instructions for use are for illustration purposes only and do
not represent the original colours of the machine. Some details of
your IMPRESSA may vary.
Feedback
Your opinion is important to us! Use the contact link at
www.jura.com.
Copyright
The instructions for use contain information which is protected by
copyright. It is not permitted to photocopy these instructions for use
or translate them into another language without the prior written
consent of JURA Elektroapparate AG.