Coffee & Tea
Brewers
BREW HF Range
3M Filtration - Foodservice
Consumption of speciality coffees, coffee based
beverages and speciality teas is increasing yearly.
(Approximately 98% of coffee is water.)
Designed to provide consistent quality hot beverages
and reduce unscheduled service calls associated with
chlorine taste and odour and scale build-up in commercial coffee and tea brewers.
Features
Benefits
• Proprietary slow release scale inhibitor
• Reduces scale build up in hot water applications and
saves on service costs
• SQC™ (Sanitary Quick Change) cartridge
• Allows fast and easy change-outs with a 1/4 turn while
minimizing the possibility of leakage and contamination
• FNPT horizontal inlet and outlet ports
• Allows direct or easily adaptable connections to existing
plumbing lines
• 0.5 micron carbon block
• Reduced sediment and chlorine taste and odour and
water borne cysts, protecting customers from illness
• 1 micron carbon block
• Protection from sediment particles that can block the
spray head
• Valve-in-head
• No separate shut off valve required, easy to change using
un-skilled staff
• Certified to NSF standard 53 for cyst reduction
• Independent qualification of performance and guarantee
of product safety
• Optional pressure gauge
• Easy to monitor filter blockage for identification of time to
change filter
3
Coffee & Tea
10 15/16”
(27.8 cm)
15 1/2”
(39.4 cm)
HF20-MS
HF25-MS
HF30-MS
HF35-MS
19 3/4”
(50.2 cm)
3”
(7.6 cm)
➤
➤
➤
➤
➤
➤
3”
(7.6 cm)
➤
➤
➤
➤
➤
HF10-MS
HF15-MS
4”
(10.2 cm)
➤
➤
➤
➤
8 15/16”
(22.7 cm)
HF05-MS
4”
➤ (10.2 cm)
➤
4”
➤ (10.2 cm)
➤
4”
➤ (10.2 cm)
Brewers
3”
(7.6 cm)
➤
➤
3” (7.6 cm) MIN. DISTANCE REQUIRED FOR CARTRIDGE REMOVAL
3”
(7.6 cm)
Coffee
and tea brewers range and technical specifications
Model/
System
Capacity
gal (litres)
Components
Head
Cartridge
Sizing
Reduction Claims
Micron
Flow
Water
Rating gpm (lpm) Application*
Chlorine Sediment
Cyst
Scale
Model
Connections
Part No
Model
Part No
1/2 gal (2 litre) pots
taste & odour
BREW105MS
(6213801)
1,500
(5,678)
1.0
0.75
(2.8)
SWC
•
•
•
VH3 - NPT
3/8”
6213001
HF05-MS
5609327
3,000
BREW110MS
(6212803)
3,500
(13,200)
0.5
1.0
(3.8)
SWC
•
•
•
•
VH3 - NPT
3/8”
6213001
HF10-MS
5609329
7,000
BREW115MS
(6213807)
3,500
(13,200)
5.0
1.0
(3.8)
HTW
•
•
•
VH3 - NPT
3/8”
6213001
HF15-MS
5609331
7,000
BREW120MS
(5616001)
9,000
(34,069)
0.5
1.5
(5.7)
SWC
•
•
•
•
VH3 - NPT
3/8”
6213001
HF20-MS
5615109
18,000
BREW125MS
(5616002)
10,000
(37,854)
1.0
1.5
(5.7)
HTW
•
•
•
VH3 - NPT
3/8”
6213001
HF25-MS
5615209
20,000
BREW130MS
(5616103)
14,000
(52,995)
0.5
1.67
(6.3)
SWC
•
•
•
•
VH3 - NPT
3/8”
6213001
HF30-MS
5615111
28,000
BREW135MS
(5616104)
12,600
(47,696)
1.0
1.67
(6.3)
HTW
•
•
•
VH3 - NPT
3/8”
6213001
HF35-MS
5615211
25,200
*SWC = Standard water conditions; HTW = High turbidity water
For commercial use with cold water only. For all systems, heads and cartridges are sold separately. Head comes with integral mounting bracket. Maximum operating
pressure is 125psi. Inlet and outlet connections are 3/8” FNPT female. NSF performance data sheet included. Filter cartridges require no pre-activation and incorporate a
carbon block media and a scale inhibitor. NSF and CFR-21 certified for use for materials in contact with drinking water. Maximum operating temperature is 38°C.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before of after the system. Systems certified for cyst reduction
may be used on disinfected water that may contain filterable cysts. EPA Establishment Number 070595-CT-001. In line with current good practice and EPDWA schedules,
filters should be changed every six months. Scheduled maintenance is recommended. 3M cannot be liable for system failures due to improper maintenance.
Water Filtration
3M Purification Inc.
3M Canada
P.O. Box 5757
London, Ontario, Canada N6A 4T1
1 800 364-3577
www.3m.ca
www.cunofoodservice.com
© 2010, 3M. All rights reserved.
1003-00802