FloWise® COMMERCIAL SHOWER SYSTEMS

FloWise® COMMERCIAL SHOWER SYSTEMS
1.25 GPM (5.7 LPM) SHOWER SYSTEM KIT
WITH HAND SHOWER, FloWise ® SHOWERHEAD & TUB SPOUT
MODEL NUMBER:
1662214 Commercial Shower System Kit
Includes:
• Shower Valve with SS
• Colony Soft Shower Only Trim
with FloWise® Showerhead
• 3-F Hand Shower - 1.25 gpm (5.7 Lpm)
• In-Line Vacuum Breaker
• Metal Hose
• Wall Supply
• 36" (914mm) Slide Bar
• 3-Way Diverter Valve
• Diverter Handle
• Slip-On Tub Spout
GENERAL DESCRIPTION:
Complete commercial shower system includes: an R120SS
pressure balance valve and trim, a wall supply with 1/2" NPT
female inlet and 1/2" NPSM male outlet, a 59" (1500mm)
metal shower hose, vacuum breaker, a 3-function
water-saving personal shower, 3-way diverter valve, FloWise®
showerhead, slip-on tub spout and a 36" (914mm) Slide Bar.
Valve features a cast brass body, washerless 47mm ceramic
disc valve cartridge with volume and temperature control and
hot limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. One-half inch direct
sweat inlets and outlets. With screwdriver stops. Durable metal
handle. Rough-in plaster guard designed for use as thin-wall
mounting adaptor. 3-function water saving hand shower with
1.25 gpm (5.7 Lpm) flow restrictor. Slide bar features an
adjustable shower holder which can be set at any height or
position along the bar and angle up to 45˚.
1660502.002
1660400.002
8888035.002
8888037.002
1660236.002
R430
T420430
8888.056
PRODUCT FEATURES:
VALVE:
Cast Brass Valve Body: Durable.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows control over water temperature
and volume.
Pressure Balancing Valve Cartridge:
Maintains
constant output temperature in response to changes in hot
and cold supply pressure.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Integral Plaster Guard and Mounting Plate: Protects
valve during installation and serves as a mounting plate for
thin-wall installations.
PERSONAL SHOWER & SHOWERHEAD:
Water Saving: Saves 40% in water usage.
SLIDE BAR:
FLOW RATE
Hand
Shower
2.5 (11 Lpm)
GALLONS PER MINUTE
R120SS
T675507.002
Simple Height Adjustment: Allows positioning of the
personal shower anywhere along the bar.
1.7 (7.6 Lpm)
0.83 (3.8 Lpm)
0
20
40
60
80
100
INLET PRESSURE (PSI)
SUGGESTED SPECIFICATION:
Shower system shall feature a wall supply with 1/2" NPT female inlets and 1/2" NPSM male outlet, 59" (1500mm) metal hose,
vacuum breaker, 1.25 gpm (5.7 Lpm) 3-function water saving personal shower, 3-way diverter valve, FloWise® showerhead,
slip-on tub spout and a 36" (914mm) Slide Bar. Pressure Balance valve shall feature a cast brass body. Shall feature ceramic
disc valve cartridge which controls water temperature and volume. Shall also feature hot limit safety stop. Faucet shall be
American Standard Model # 1662214.002.
© 2012 AS America Inc.
L329
FloWise® COMMERCIAL SHOWER SYSTEMS
1.25 GPM (5.7 LPM) SHOWER SYSTEM KIT
WITH HAND SHOWER, FloWise ® SHOWERHEAD & TUB SPOUT
CODES AND STANDARDS
Install as required to comply with local code
requirements.
ASME A112.18.1
ASSE 1016
ANSI A117.1
CSA B 125
IAPMO (cUPC)
Finish
Polished
Chrome
Product
Number
Description
002
FloWise Commercial Shower System Kit. Contains pressure balance valve with volume and temperature
control, trim kit, 3-function water saving hand shower, metal hose, vacuum breaker, 3-way diverter valve,
FloWise® showerhead, slip-on tub spout, wall supply and 36" (914mm) slide bar. 1.25 gpm (5.7 Lpm).
®
1662214
BARRIER FREE B651.12
"SEE ILLUSTRATION BELOW"
6"
(153mm)
32mm
(1-1/4")
DIA.
HOLE
1/2"
NPT
SHOWER
ARM
1/2 NOM.
COPPER
SWEAT ALL
CONNECTIONS
FINISHED
WALL
81mm
(3-1/8")
185mm
(7-3/8")
REF.
66mm MAX.
(2-5/8")
51mm
(2")
3"
(76mm)
6-3/4"
(171mm)
ALL CONNECTIONS 1/2" NPT
(R430)
SWEAT INLETS
w/STOPS
(R120SS)
149mm
(5-7/8")
70mm
(2-3/4")
71mm
(2-3/4")
103mm
(4-1/16")
57mm HOLE SIZE
(2-1/4")
41mm MIN.
(1-5/8")
3-7/8"
(98mm)
94mm
(3-3/4")
REF.
2-3/4"
(70mm)
FINISHED
WALL
FINISHED
WALL
3-3/4"
(95mm)
48mm
(1-7/8")
65mm
(2-1/2")
127mm
(5")
82mm
(3-1/4")
FINISHED
WALL
130mm
(5-1/8")
REF.
13mm (1/2")
INLET:
1/2" NPT
1829mm (72")
to 1990mm (78")
(OPTIONAL)
TO FINISHED
FLOOR
© 2012 AS America Inc.
1/2" COPPER
32mm(1-1/4")
DIA HOLE
32mm
(1-1/4")
53mm
(2-1/16")
849mm
(33-3/8")
240mm
(9-1/2")
OUTLET:
1/2" NPSM HOSE
CONNECTION
RUBBER GASKET
FINISHED WALL
85mm
(3-3/8")
900mm
(35-3/8")
24mm
(1")
1/2" NPSM
86mm
(3-3/8")
L330
45mm
(1-3/4")
Download PDF