12 Cup Automatic Coffee Brewer with 2 Warmers

ITEM#
12 Cup Automatic Coffee Brewer
with 2 Warmers
PROJECT
DATE
Features
12 Cup Automatic Coffee Brewer
• Brews 3.8 to 5.1 gallons (14.4 to 19.3 litres) of perfect coffee per hour.
• All stainless steel construction.
• Two separately controlled warmers.
• Faucet kit available.
• SplashGard® funnel deflects hot liquids away from the hand.
Model OT15
(2 warmers)
(decanters sold separately)
Dimensions: 22.4” H x 12” W x 18.3” D
(56.9cm H x 30.5cm W x 46.5cm D)
For current specification sheets and other information, go to www.bunn.com.
Related Products
Easy Clear® EQ-17-TL
Product No. : 30200.1000
Dimensions:
127⁄16" H x 21⁄2" W x 3" D
31.6 cm H x 6.35 cm W x 7.62 cm D
Paper Filter Pack
Product No. : 20115.0000
Packed per case: 1,000
Dimensions: 41⁄4" Base x 23⁄4" Sidewall
10.8 cm Base x 6.98 cm Sidewall
Easy Clear® ED-17-TL
Product No. : 30201.1001
Dimensions: 81⁄4" H x 25⁄16" Dia.
20.95 cm H x 5.87 cm Dia.
Easy Pour® black decanter
Product No. : 06100.0101
Quantity: 1 (also packaged in
1GPR SS Portable Server
on an RWS1 Warmer
1GPR Product No. : 12487.0001*
RWS1 Product No. : 12203.0010
*Also available with side handles
or black decor.
quantities of 2, 3, 6, 12, & 24)
Easy Pour® orange decanter (for decaf)
Product No. : 06101.0101
Quantity: 1 (also packaged in
quantities of 2, 3, 6, 12, & 24)
Model
Agency Listing
OT15
OT20
E9001.0012B
Patents Apply
12/06
A1.11
Dimensions & Specifications
Model
Product #
Volts
Amps
Tank Heater
Watts
Total
Watts
Brewing
Capacity
Cu.
Ft.
Shipping
Weight
Cord
Attached
OT 15
OT 20
20830.0000
20830.0001
120
120
13
17
1320
1800
1570
2090
3.8 gal./hr.
5.1 gal./hr.
4.9
4.9
34 lbs.
33 lbs.
Yes*
No
Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise) per 1/2 gallon brew time of 4 minutes.
*Power cord (NEMA 5-15P) 15 Amp-120V machine only.
Electrical: OT 15 requires 2-wires plus ground service rated 120V, single phase, 60Hz.
OT 20 requires 2-wires plus ground service rated 120V, single phase, 60Hz.
Plumbing: 20-90 psi (138-621 kPa). Supplied with 1⁄4" OD male flare fitting.
POWER CORD
22.4
8.0
WATER SUPPLY
CONNECTION
(.250 OD TUBE
X 45˚ FLARE)
5.0
1.58
8.84
12.0
1.0
2.4
14.00
18.25
2.8
(1.25 MAX FOR
LEVELING MACHINE)
6.8
2.1
BUNN Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
Bunn Corporation owns all copyrights relating to materials in this publication. Please contact Bunn Corporation to request permission to reproduce any portion of this publication.