MODELS:
SGP124BN-T
Aqua-Pure® Commercial Products
SPEC #
AT A GLANCE
QUANTITY
Aqua-Pure® Model SGP124BN-T single-cartridge water filtration systems
assure consistent high-quality water for espresso and espresso-based
drinks at flow rates to 0.5 gpm (1.9 lpm). A blend of high-capacity strong
and weak-acid ion-exchange resins reduces calcium and magnesium ions
to prevent hard scale formation on heating coils and boilers resulting in
energy inefficiency, downtime, and expensive service calls. Inlet water
TDS and alkalinity are also reduced. Premium activated carbon reduces
chlorine taste and odor and bitterness associated with poor water quality.
A built-in bypass directs 75% of the inlet water through the media
combination for treatment. Model SGP124BN-T has a capacity of 422.6
gallons (1,921 liters) for inlet water with 180 ppm (10.5 gpg) hardness.
APPLICATION
ESPRESSO
PRODUCT BENEFITS
• Consistent, great-tasting espresso and espresso drinks from water with
reduced hardness, alkalinity, TDS, and chlorine taste and odor.
• Increased lifetime and capacity from a built-in bypass that allows 25%
of inlet water to pass through untreated.
• Reduced hard scale formation on the heating coils by the reduction of
calcium and magnesium ions results in improved energy efficiency and
reduced downtime and expensive service calls.
• Patented* valve-in-head design simultaneously shuts off and vents
water with 1/4 turn, allowing for simple and trouble-free cartridge
change-outs.
• SQC™ - Sanitary Quick Change – encapsulated cartridge design allows
for fast and easy change-outs with a 1/4 turn while minimizing the
possibility of leakage and contamination.
• FDA CFR-21 compliance provides assurance of safety.
• 3/8" FNPT horizontal inlet and outlet ports allow direct or easily
adaptable connections to existing plumbing lines.
• Optional pressure gauge allows monitoring of downstream water
pressure.
• Exhausted cartridges may be incinerated for environmentally conscious
disposal.
PRODUCT SPECIFICATIONS
Model
Number
Part
Number
Reduction Claims
SGP124BN-T
56176-03
Hardness, Chlorine, Taste & Odor
Capacity**
422.6 gal @ 10.5 gpg
(1,921 lit @ 180 ppm)
Service Flow Rate
Replacement Cartridge
0.5 gpm (1.9 lpm)
P124BN
56109-01
* U.S. Patent #6,458,269
** Capacity may be approximated by ratio of inlet-water hardness.
a 3M company
Aqua-Pure® Commercial Products
SPEC #
QUANTITY
MODEL NUMBER
SGP124BN-T
PART NUMBER
PHYSICAL SPECIFICATIONS
INS TAL L AT I O N T I P S
• System includes a head assembly, integral mounting bracket, and single
cartridge filter.
4"
(10.2 cm)
• Optional downstream pressure gauge port in top of head assembly.
• Inlet and outlet fittings are 3/8" FNPT.
• System incorporates an internal automatic 1/4 turn shut off valve.
• Filter cartridge is double o-ring seal type.
19 3/4"
(50.2 cm)
• System maximum operating pressure is 125 psi (862 kPa) and
operating temperature 100°F (38°C).
• Recommended service flow rate is 0.5 gpm (1.9 lpm).
• Filter cartridge incorporates premium activated carbon media and
a blend of ion-exchange media.
• System is CFR-21 compliant.
• Cartridge body is constructed from high-impact polypropylene.
• Cartridge is sanitary in design, requiring no contact with the filter
media during cartridge change-out.
• Filter cartridge requires no pre-activation.
3" (7.6 CM) MIN REQUIRED
FOR CARTRIDGE REMOVAL
• Shipping weight: 12 lbs. (5.4 kg) per case.
• Case Quantity: 4
INS TAL L AT I O N T I P S
• Shut off downstream equipment prior to installation of
the system.
• Choose mounting location to support full system weight
when operating.
• Do not exceed operating parameters for temperature
or pressure.
• Do not install outdoors.
Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
CUNO Incorporated recommends regularly scheduled maintenance and
replacement of the filter cartridge(s) in order for the product to perform
as advertised/sold. Change the filter cartridge at least every 6 months.
CUNO shall not be liable for system failures due to improper maintenance.
• For commercial use only with cold water.
LIMI T E D 5 YE AR WA R R A N T Y
CUNO Incorporated warrants to the original purchaser-consumer that this product is free from defects in materials and workmanship. This warranty,
together with any and all warranties implied by law, shall be limited to a period of five (5) years from the date of original purchase by the consumer.
This warranty does not apply to failures that result from abuse, misuse, alteration or damage not caused by CUNO. This warranty is subject to exclusions
and limitations. Please refer to the Warranty Card provided with the product for details.
S ERVI CE W O R L D W ID E
CHINA
AUSTRALIA
EUROPE
CUNO Filtration Shanghai Co. Ltd.
No. 2 Plant East Side
Xin Miao San Road
XinQiao Town SongJiang District
Shanghai, China 201612
CUNO Pacific Pty Ltd.
140 Sunnyholt Road
Blacktown, N.S.W. 2148
Australia
CUNO Limited
21 Woking Business Park
Albert Drive
Woking, Surrey
GU21 5JY, England
Visit www.nsf.org for the
claims associated with
products that are NSF listed.
BRAZIL
JAPAN
CUNO K.K.
Hodogaya Station Building 6F
1-7, Iwai-Cho, Hodogaya-Ku
Yokohama 240-0023, Japan
© 2005 CUNO Incorporated
LITFS304 0905
CUNO Latina Ltda
Rua AMF do Brazil - 251
18120 Mairinque-SP, Brazil
SINGAPORE
CUNO Filtration Asia Pte Ltd
2A Tuas Avenue 12
Singapore 639023
a 3M company
CUNO Incorporated
400 Research Parkway
Meriden, CT 06450, USA
Toll Free: 1.888.218.CUNO
Worldwide: 203.237.5541
Fax: 203.238.8701
www.cunofoodservice.com