Infusion Dual Dilution 3 Gallon Iced Tea Brewer

Item#
Infusion Dual Dilution
3 Gallon Iced Tea Brewer
Project
Date
Features
Infusion Dual Dilution 3 Gallon Iced Tea Brewer
• Large tank provides back-to-back brewing capacity and allows 3 or 5 gallon
(11.4 to 18.9 litre) tea batches.
• Brews 16.3 to 26.7 gallons (61.7 to 101.1 litres) per hour from real
tea leaves.
• Meet your volume needs; brew 3 gallons (11.4 litres) of iced tea into each
dispenser and serve up to 6 gallons (22.7 litres) within a narrow footprint.
• Specifically designed to accommodate and brew into two BUNN 3.5 gallon
narrow tea dispensers (can also brew directly into standard tea dispensers).
• Includes rotating brew basket, base platform adapter, dedicated dilution
nozzles and brew selection switch.
• Color coded decals help the operator properly align the brew basket,
dispenser and choose the correct selection.
• Three recipe buttons and full/half options for maximum flexibility.
• Includes two button graphic overlay for customizing the user interface.
• Digital temperature control, pre-infusion, pulse brew and cold brew lockout.
• SplashGard® funnel deflects hot liquids away from the hand.
• Includes Quickbrew (Q) funnel tip for easy conversion.
Sweetener Model Features
• Left side preset with sweetener valve.
• Dilution nozzles labeled “Sweet” and “Unsweet.”
• Each brew button’s sweetener may be independently set and easily
adjusted using the Sweet Meter.
• “Out of Sweetener” indicator - LCD blinks to aid operator.
• Separate inlet for sweetener - use existing CO2 systems or external third
party pump for sweetener delivery.
ITB Dual Dilution with
(2) TDO-N-3.5 Dispensers
(dispensers sold separately)
Dimensions: 34” H x 12.2” W x 22.6”D
(86.4cm H x 30.9cm W x 57.4cm D)
For current specification sheets and other information, go to www.bunn.com.
Related Products
TDO-N-3.5 – Tea Dispenser
Product No. : 39600.0001
Capacity: 3.5 gallons
Weight: 12.3 lbs.
Dimensions:
21.6” H x 6.2” W x 13.5” D
59.4cm H x 15.7cm W x 34.3cm D
Easy Clear® EQHP-Tea
Product No. : 39000.0007
Easy Clear® EQHP-TEACRTG
Replacement Cartridge
Product No. : 39000.1007
TD4T – Dual Reservoir
Tea Dispenser
Product No. : 03250.0032
Capacity: 4 gallons
Weight: 14.5 lbs.
Dimensions:
22” H x 9.1” W x 15.7” D
55.9cm H x 23.1cm W x 39.9cm D
Single/Dual Filter Pack
Product No. : 20100.0000
Packed per case: 500
Dimensions: 51⁄4" Base x 33⁄4" Sidewall
13.34 cm Base x 9.52 cm Sidewall
Model
ITB, DUAL DILUTION
TB6 Funnel
Product No. : 03021.0013
TB6Q Funnel
Product No. : 03021.0014
Drip Tray
Product No. : 38029.1002
Agency Listing
UL
LISTED
9/12
B13
Dimensions & Specifications
Model
Product #
ITB, Dual Dilution 41400.0002
ITB, Dual Dilution 41400.0003
†
Volts Amps Tank Heater Total
Watts
Watts
120
120
14
14
w/sweetener
Power cord (NEMA 5-15P) 15 Amp-120V machine only.
1680
1680
1700
1700
Brewing
Capacity
Cubic
Shipping
Measure Weight
16.3 gal./hr.*
16.3 gal./hr.*
8.8 ft3
8.8 ft3
Cord
Attached
44 lbs.
44 lbs.
Yes†
Yes†
* Hourly capacity of 16.3 gallons is for standard funnel tip and delayed dilution. Capacity may be increased to 26.7 gallons/hour using “Q” quick brew funnel tip and no dilution delay.
Electrical: Models require 2-wires plus ground service rated at 120V, single phase, 60 Hz.
Plumbing: 20-90 psi (138-621 kPa). Machine supplied with 1⁄4" OD male flare fitting. Requires minimum of 1 gpm water
flow.
34.37
23.08
1.93
maximum dispenser
depth: 15” (TD3-N)
5.02
7.15
12.15
WATER SUPPLY
CONNECTION
.250 OD FLARE
SWEETENER
CONNECTION
19.04
22.57
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
9/12 © Bunn-O-Matic Corporation