RFID Systems Product Specifications Selector

RFID Systems
Product Specifications
Overview
Texas Instruments Radio Frequency Identification Systems is an industry leader in RFID technology, and the world’s
largest integrated manufacturer of TI-RFid™ tags, TI-RFid smart labels, and TI-RFid reader systems. With more than
1 billion RFID tags manufactured, TI-RFid technology is used in a broad range of RFID applications worldwide. TI is
an active member of many standards bodies, including ISO, ISO/IEC, ECMA International, ETSI, and several national
standardization bodies working to drive the adoption of global standards for RFID technology.
HF Reader ICs
Part Number
TRF7960
TRF7961
Operating Frequency
13.56 MHz
13.56 MHz
Supported Protocols
ISO 15693
ISO 15693
ISO 18000-3 (Mode 1)
ISO 18000-3 (Mode 1)
ISO 14443A & B
Operating Voltage
2.7 V to 5.5 Vdc
2.7 to 5.5 Vdc
Current Consumption
Transmit: 200mW @ 120 mA, typ.
Transmit: 200mW @ 120 mA, typ.
100mW @ 70 mA, typ.
Active (RX only):
10 mA, typ.
100mW @ 70 mA, typ.
Active (RX only):
10 mA, typ.
Stand-by:
120 μA
Stand-by:
120 μA
Power down:
<1 μA
Power down:
<1 μA
Transmitter Power
Adjustable power, 100mW or 200mW at 5 Vdc
Adjustable power, 100mW or 200mW at 5 Vdc
Transmitter Modulation
ASK, adjustable 8% to 30% OOK
ASK, adjustable 8% to 30% OOK
Communication Interface
Parallel 8-bit or 4-wire SPI
Parallel 8-bit or 4-wire SPI
Operating Temperature
–40˚C to +110˚C
–40˚C to +110˚C
Storage Temperature
–55˚C to +150˚C
–55˚C to +150˚C
Package
32-pin QFN (5 mm × 5 mm)
32-pin QFN (5 mm × 5 mm)
Packing / Delivery
Tape-on Reel, 250 or 3000 per reel
Tape-on Reel, 250 or 3000 per reel
www.ti.com/rfid
Call 1-800-962-RFID(7343)
LF Reader Types
Part Number
TMS3705A1DRG4
RI-RFM-003B
RI-RFM-007B
RI-RFM-008B
RI-ACC-008B
Type
IC (SO 16)
Mini RFM Module
High-Performance RFM
Remote Antenna RFM
Antenna Tuning Board
Typical Read Range*
up to 20 cm
up to 60 cm
up to 200 cm
up to 200 cm
up to 200 cm
Interface
I/O
I/O
I/O**
I/O**
Antenna Terminals
Operating Frequency
134.2 kHz
134.2 kHz
134.2 kHz
134.2 kHz
134.2 kHz
Operating Voltage
4.5Vdc...5.5Vdc
5Vdc
7Vdc...24Vdc
7Vdc...24Vdc
Part Number
RI-CTL-MB2B
RI-CTL-MB6B
RI-STU-MRD1
RI-STU-251B
Type
Digital Contr. Module
Digital Contr. Module
Typical Read Range*
Interface
RS-232, USB
RS-422/485, USB
Operating Frequency
Operating Voltage
7Vdc...25Vdc
7Vdc...25Vdc
Reader Module
Reader/Writer
up to 30 cm
up to 200 cm
(RS-232, TTL level)
RS-232/422/485
134.2 kHz
134.2 kHz
5Vdc
10Vdc...24Vdc
* Dependent on the configuration used, the RF regulation in country of use and the environmental condition
** Modules RI-CTL-MB2B/RI-CTL-MB6B have to be combined with RFM modules
LF Antenna Types
Part Number
RI-ANT-S01C, RI-ANT-S02C
RI-ANT-P02A
RI-ANT-G01E
RI-ANT-G02E
RI-ANT-G04E
Type
Stick
Stick
Gate
Gate
Gate
Inductance
27μH
116μH
27μH
27μH
26μH
Dimensions
140 ± 2 × 21 ± 2 (dia.) mm
133 ± 1 × 21.3 ± 1 (dia.) mm
715 × 270 × 25 mm
200 × 200 × 25 mm
1018 × 518 × 47 mm
Operating Temperature
–30 to 70°C
–30 to 70°C
–30 to 60°C
–30 to 60°C
–30 to 60°C
Protection Class
IP66
IP65
IP65
IP65
IP44
Part Number
RI-TRP-R9BK, RI-TRP-W9WK,
RI-TRP-M9WK
RI-TRP-RR3P, RI-TRP-WR3P,
RI-TRP-REHP, RI-TRP-WEHP
RI-INL-RR2B, RI-TRP-WR2B,
RI-INL-DR2B, RI-TRP-RE2B/WE2B
RI-INL-R9QM,
RI-INL-W9QM
RI-TRP-R9VS,
RI-TRP-W9VS
Type
12 mm Wedge
23 mm Glass
32 mm Glass
24 mm Disk
Mount-on-Metal
Memory Types Available
R/O (64 bit), R/W (80 bit)
Multi (32-bit UID, 208-bit R/W)
R/O (64 bit),
R/W (80 bit)
R/O (64 bit), R/W (80 bit)
MPT (1360 bit)
R/O (64 bit),
R/W (80 bit)
R/O (64 bit),
R/W (80 bit)
Typical Read Range*
up to 20 cm
up to 60 cm
up to 100 cm
up to 50 cm
up to 120 cm
Operating Frequency
134.2 kHz
134.2 kHz
134.2 kHz
134.2 kHz
134.2 kHz
Dimensions
12 × 6 × 3 mm
3.85 × 23.1 mm
3.85 × 31.2 mm
24 mm dia.
Protection Class
IP68
Hermetically Sealed
Hermetically Sealed
IP67
Case Material
Plastic Compound
Glass
Glass
PP
Part Number
RI-TRP-R9QL,
RI-TRP-W9QL
RI-TRP-R9UR,
RI-TRP-W9UR
RI-TRP-RFOB,
RI-TRP-WFOB
RI-TRP-R4FF,
RI-TRP-W4FF
RI-TRP-R9TD,
RI-TRP-W9TD
Type
30 mm Disk
85 mm Disk
Keyring Tag
Card
120 mm Cylindrical
Memory types available
R/O (64 bit),
R/W (80 bit)
R/O (64 bit),
R/W (80 bit)
R/O (64 bit),
R/W (80 bit)
R/O (64 bit),
R/W (80 bit)
R/O (64 bit),
R/W (80 bit)
Typical Read Range*
up to 60 cm
up to 150 cm
up to 60 cm
up to 100 cm
up to 200 cm
Operating Frequency
134.2 kHz
134.2 kHz
134.2 kHz
134.2 kHz
134.2 kHz
Dimensions
29.4 × 8.4 mm
85.5 × 5.5 mm
10.5 × 37.5 mm
85.5 × 54 × 1.3 mm
21 × 121 mm
Protection Class
IP67
IP53
Hermetically Sealed
ISO 7810
IP67
Case Material
POM
ASA
ABS, Glass
PVC
PEI
LF Transponders
* Dependent on the configuration used, the RF regulation in country of use and the environmental condition
PaLFI – Passive Low Frequency Interface
Part Number
TMS37157
Communication Interfaces
SPI, RFID, Direct Microcontroller Access via RFID
Operating Frequency
134.2kHz
Wired Communication Interface
3-wire SPI
Operating Voltage
2V to 3.6Vdc
Current Consumption
Active Mode Max: 150μA
Power Down Mode: 60nA
Battery Charge Current
Memory
Max: 2mA
32-bit Unique Serial Number
968-bit EEPROM User Memory
8-bit Selective Address
Operating Temperature
–40°C to 85°C
Storage Temperature
–40°C to 125°C
Package
16-Pin VQFN (4 mm × 4 mm)
Packing / Delivery
Tape-on Reel, 3000 per reel
RFID
102 × 36 × 16.5 mm
HF Packaged Transponders
Part Number
RF-HDT-DVBE
RF-HDT-DVBB
RI-TH1-CB1A
Type
22 mm Coin Overmolded
22 mm Coin Overmolded
Vicinity Card
Available Memory
256 bits organized in 8 × 32-bit blocks
2k bits organized in 64 × 32-bit blocks
2k bits organized in 64 × 32-bit blocks
Operating Frequency
13.56 MHz ± 300 kHz
13.56 MHz ± 300 kHz
13.56 MHz ± 200 kHz
Dimensions
Ø 22 ± 0.2 mm × 3 ± 0.2 mm
Ø 22 ± 0.2 mm × 3 ± 0.2 mm
85.6 mm × 54 mm × 0.76 mm (according ISO 7810)
Case Material
PPS, black
PPS, black
PVC (Polyvinyl chloride), white
Tag-it™ HF-I Plus Transponders Inlay
Part Number
RI-I11-112A-03
(square)
RI-I11-112B-03
(square)
Supported Standards
ISO 15693, ISO/IEC 18000-3 (Mode 1)
RI-I02-112A-03
(rectangle-lg)
RI-I02-112B-03
(rectangle-lg)
RI-I03-112A-03
(rectangle-mini)
RI-I15-112B-03
(rectangle-med)
RI-I16-112A-03 RI-I17-112A-03
(circular)
(CD/DVD)
Available Memory
2k bits organized in 64 × 32-bit blocks
Factory Programmed
64 bits
Resource Frequency
13.86 MHz
14.4 MHz
13.86 MHz
14.4 MHz
13.86 MHz
14.1 MHz
13.7 MHz
13.8 MHz
Frequency Offset for
Lamination Material
Paper
PVC
Paper
PVC
Paper/PVC
Paper/PVC
Paper/PVC
Paper/PVC
Antenna Size (mm)
45 × 45
45 × 45
45 × 76
45 × 76
22.5 × 38
34 × 65
Ø 24.2
Ø 32.5
Foil Width (mm)
48 mm ±0.5 mm
Delivery
Single row tape with 48-mm foil width wound on cardboard reel
Tag-it™ HF-I Pro Transponder Inlays
Part Number
RI-I11-114A-S1
(square)
Features – Password Write/Password Kill Functionality
RI-I11-114B-S1
(square)
RI-I02-114A-S1
(rectangle-lg)
RI-I02-114B-S1
(rectangle-lg)
RI-I03-114A-S1
(rectangle-mini)
RI-I16-114A-S1
(circular)
RI-I17-114A-S1
(CD/DVD)
Supported Standards
ISO 15693; ISO/IEC 18000-3 (Mode 1)
Available Memory
256 bits organized in 8 × 32-bit blocks
Factory Programmed
64 bits
Resource Frequency
Frequency Offset for
Lamination Material
13.86 MHz
Paper
14.4 MHz
PVC
13.86 MHz
Paper
14.4 MHz
PVC
13.86 MHz
Paper/PVC
13.7 MHz
Paper/PVC
13.8 MHz
Paper/PVC
Antenna Size (mm)
45 × 45
45 × 45
45 × 76
45 × 76
22.5 × 38
Ø 24.2
Ø 32.5
Foil Width (mm)
48 mm ±0.5 mm
Delivery
Single row tape with 48-mm foil width wound on cardboard reel
RI-I02-114B-01
(rectangle-lg)
RI-I03-114-01
(rectangle-mini)
RI-I16-114A-01
(circular)
RI-I17-114A-01
(CD/DVD)
Tag-it™ HF-I Standard Transponder Inlays
Part Number
RI-I11-114A-01
(square)
RI-I11-114B-01
(square)
Supported Standards
ISO/IEC 15693; ISO/IEC 18000-3 (Mode 1)
RI-I02-114A-01
(rectangle-lg)
Available Memory
256 bits organized in 8 × 32-bit blocks
Factory Programmed
64 bits
Resource Frequency
13.86 MHz
14.2 MHz
13.86 MHz
14.4 MHz
13.86 MHz
13.7 MHz
13.8 MHz
Frequency Offset for
Lamination Material
Paper
PVC
Paper
PVC
Paper/PVC
Paper/PVC
Paper/PVC
Antenna Size (mm)
45 × 45
45 × 45
45 × 76
45 × 76
22.5 × 38
Ø 24.2
Ø 32.5
Foil Width (mm)
48 mm ±0.5 mm
Delivery
Single row tape with 48-mm foil width wound on cardboard reel
Tag-it™ HF-I Family Die
Part number
RF-HDT-AJLE-G1
RF-HDT-WNME-M0
RF-HDT-AJLS-G1
HF-I Family
Standard
Standard
Pro
Die Supported Standards
ISO/IEC 15693;
ISO/IEC 15693;
ISO/IEC 15693;
ISO/IEC 18000-3 (Mode 1)
ISO/IEC 18000-3 (Mode 1)
ISO/IEC 18000-3 (Mode 1)
256 bits organized in 8 × 32-bit blocks
256 bits organized in 8 × 32-bit blocks
256 bits organized in 8 × 32-bit blocks
Die Thickness
150µm
710–740µm
150µm
Wafer Processing
Bumped, Sawn, Grinded, Inked
Bumped, Sawn, Grinded, Inked
Bump Material
Gold (AU)
Gold (AU)
Available Memory
www.ti.com/rfid
Call 1-800-962-RFID(7343)
Applications
Partner with TI, the technology leader in application-specific RFID solutions, for turnkey end-to-end formulas to employ
RFID in specific tracking models such as recycling, waste management and high value asset tracking – to name a few. The
integration of TI-RFid™ products into proven application models, in conjunction with third party Developers Network
partners gives customers the ability to adapt an end-to-end RFID asset tracking solutions for their business, without costly
mistakes or development time. TI’s RFID Application Solutions are state-of-the-art design and system models for unique
vertical business needs that result in lower overall system cost and faster, more efficient roll-outs.
Learn more at www.ti.com/rfid-applications
TI RFID Worldwide Technical Support
Internet
Europe, Middle East and Africa (EMEA)
TI RFID Home Page
European Toll Free*
International
Russian Support
www.ti.com/rfid
Product Information Centers
US and Canada
Phone
Fax:
800-962-RFID (7343)
214-567-7343
Business Hours (Central Standard Time)
Monday – Friday 8:00 am – 5:00 pm
E-mail: rfidsupport@ti.com
Texas Instruments
Radio Frequency Identification System
6550 Chase Oaks Blvd., MS 8470
Plano, Texas 75023
USA
00800 275 83927
+49 (0) 8161 80 2121
+7 (495) 981 07 01
*The European Toll Free number is not active in all countries. If you have
technical difficulty calling the toll-free number please use the international number
Fax:
+49 (0) 8161 80 2045
Business Hours (Central European Time)
Monday – Wednesday 10:00 – 18:00
Tuesday – Thursday 09:00 – 18:00
Friday 09:00 – 16:00
E-mail: rfidsupport@ti.com
Texas Instruments Deutschland GmbH
RFID Systems
Haggertystrasse 1
D-85350 Freising
Germany
Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and
conditions of sale. Customers are advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no
liability for applications assistance, customer’s applications or product designs, software performance, or infringement of patents. The publication of information
regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
The platform bar, TI-RFid and Tag-it are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
© 2010 Texas Instruments Incorporated
Printed in U.S.A.
Printed on recycled paper
RFID010208A
SPAT178A
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DLP® Products
www.dlp.com
Communications and
Telecom
www.ti.com/communications
DSP
dsp.ti.com
Computers and
Peripherals
www.ti.com/computers
Clocks and Timers
www.ti.com/clocks
Consumer Electronics
www.ti.com/consumer-apps
Interface
interface.ti.com
Energy
www.ti.com/energy
Logic
logic.ti.com
Industrial
www.ti.com/industrial
Power Mgmt
power.ti.com
Medical
www.ti.com/medical
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Space, Avionics &
Defense
www.ti.com/space-avionics-defense
RF/IF and ZigBee® Solutions www.ti.com/lprf
Video and Imaging
www.ti.com/video
Wireless
www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2010, Texas Instruments Incorporated