Installation Instructions:
"I've specified
CPC's couplings
for years because
they are so easy
to use and I never
have to worry
about leaks, spills
or quality issues.
Our customers
love them!"
Matt
San Diego, CA
Coffee/Tea
Espresso
Connect coupling to the back of a coffee
brewer with threaded socket. Tighten with
wrench 1/4 turn past finger tight.
Thread body into hose assembly.
Tighten with wrench.
Potable Water
Thread insert into filter housing. Tighten with wrench.
Tubing Options for CPC Couplings:
Hose Barb
Copper Compression
Connect 1/4” ID or 3/8” ID braided polyethylene
tubing with our hose barbs. Tighten with clamp,
being careful not to overtighten.
Poly Compression
Connect 1/4” OD and 3/8” OD polyethylene
tubing with our poly compression. Tighten
with wrench 1-2 turns past finger tight.
Connect 1/4” OD and 3/8” OD copper or
polyethylene tubing with our copper compression.
Tighten with wrench 1/2 turn past finger tight.
Quick Connect Adapter
Works with
any quick
connect fitting!
Push tube stub into
quick connect fitting.
Specifications
Pressure:
Temperature:
Materials:
© 2002 Colder Products Company
Vacuum to 120 psi, 8.3 bar
-40˚F to 180˚F continuous
-40˚C to 82˚C continuous
Acetal
NSF
®
Call toll free 1-800-444-2474 or visit us at www.colder.com
CPC Couplings:
The Faster, Easier Way to Service
Coffee and Beverage Equipment
Quick Disconnect Couplings from Colder Products
Company (CPC) make equipment service fast and easy.
They feature a built-in shutoff valve, so you’ll never have to
shut-off valves
search for and shut off the water supply, and they can be
used over and over again, literally hundreds of times, with no
leaks. CPC couplings can be used on in-line water filters, water coolers, coffee,
cappuccino, espresso, and tea dispensing equipment, strainers, and RO units.
They’re the fastest, easiest way to service almost any equipment with fluid lines.
No tools needed to
disconnect fittings
● No need to cut
tubing before
reusing
● No more cleaning
up spills
● No need to apply
sealant to prevent
leaks
● No need to
reconnect fittings
Fittings vs. Couplings
●
© 2002 Colder Products Company
TOPIC
FITTINGS
COUPLINGS
Shutoff
Valve/
Spillage
No shutoff valve.
Need to shut off water
before disconnect.
Fittings spill when they are
disconnected.
Built-in shutoff valve.
No need to shut off water
before disconnect. Also
prevents spillage when the
couplings are disconnected.
Rotation
Does not rotate in the
connected state.
Fittings do not allow you
to rotate the tubing while
connected. This can lead to
kinked tubing or force you
to disconnect the fitting to
move a piece of equipment.
Coupling can rotate while
connected.
Because CPC couplings seal on
an o-ring, the body and insert
can rotate relative to one
another and still retain a leakfree connection. This allows
you to move a piece of
equipment without having to
disconnect the line or have a
large coil of extra tubing.
Side-Load
Leaks under side-load.
No side-load leakage.
Reusable
Tubing must be re-cut
between uses.
CPC couplings are laboratory
tested to 2,500 cycles – leak-free.
Because you’re connecting/
disconnecting the coupling
and not the tubing, there is
no need to cut the tubing
every time.
Flexible
No common fitting, need
different fittings for copper,
LDPE, or bev-line.
There is no one fitting that will
work with all types of tubing.
Works with all types
of tubing.
Call toll free 1-800-444-2474 or visit us at www.colder.com
Coffee,Tea & Espresso Applications
Equipment Type
NSF
®
CPC TIP
To eliminate tight bends
when connecting to a brewer,
try using CPC elbow inserts.
Coffee/Tea Brewers
Use a 1/4" or 3/8" female flare threaded body on the back
of a coffee brewer or tea urn and save time and money on
service calls by not having to hunt for a shutoff valve every
time you need to disconnect the brewer.
Bodies
1/4” flare thread
non-valved
(42000)
3/8” flare thread
valved (45500)
Espresso
Stop threading an NPT fitting into a BSPT
hose. Connect a 3/8" BSPT onto the end
of the supply hose to allow for fast and
easy disconnects without the messy spills.
Designed specifically for the threads
found on espresso machines.
Bodies
3/8” BSPP valved
(9203301)
Tubing Type
Reinforced Polyethylene
Inserts
1/4” hose barb
valved (42600)
1/4” hose barb
elbow valved
(42800)
3/8” hose barb
valved (42700)
3/8” hose barb
elbow valved
(42900)
1/4” PTF elbow
valved (43000)
3/8” PTF valved
(43500)
3/8” PTF elbow
valved (43100)
Polyethylene
Inserts
1/4” PTF valved
(43400)
1/4” compression
valved (44900)
3/8” compression
valved (45000)
Copper
Inserts
1/4” compression
valved (44900)
© 2002 Colder Products Company
3/8” compression
valved (45000)
Call toll free 1-800-444-2474 or visit us at www.colder.com
Potable Water Applications
Equipment Type
NSF
®
In-line Disposable Water Filter
Use CPC inserts and bodies on your in-line filters
and changing a filter really is a SNAP! You can
change a filter in just 15 seconds, guaranteed!
Insert
1/4” NPT non-valved
(42300)
CPC TIP
To save money, use a valved
body on the pressure side of an
in-line filter and a non-valved
body on the outlet side.
Tubing Type
Reinforced Polyethylene
Bodies
1/4” hose barb
valved (42100)
1/4” hose barb
non-valved
(40700)
3/8” hose barb
valved (42200)
3/8” hose barb
non-valved (40800)
Polyethylene
Bodies
3/8” PTF valved
(43300)
1/4” PTF valved
(43200)
1/4” PTF
non-valved
(49300)
1/4” compression
valved (46000)
1/4” compression
non-valved
(9203800)
3/8” PTF
non-valved
(49400)
Copper
Bodies
1/4” compression
valved (46000)
1/4” compression
non-valved
(9203800)
3/8” compression
valved (46100)
Call your OCS distributor for pricing and availability, or call Colder Products
Company at 1-800-444-2474 to find the distributor closest to you.
© 2002 Colder Products Company
Call toll free 1-800-444-2474 or visit us at www.colder.com
ISO 9001
CERTIFIED
Colder Products Company
1001 Westgate Drive
St. Paul, Minnesota 55114
U.S.A.
Colder Products Company GmbH
Schmalweg 50
D-55252 Mainz-Kastel
Germany
Colder Products Company Asia
11A, Vista Court
La Vista, Discovery Bay
Hong Kong
Phone:
651-645-0091
Fax:
651-645-5404
Toll Free: 1-800-444-2474
info@colder.com
www.colder.com
Phone: +49-6134-2878-0
Fax:
+49-6134-287828
cpcgmbh@colder.de
www.colder.com
Phone: 852-9436-5986
Fax:
852-2987-2509
colder@pacific.net.hk
www.colder.com
Distributed By:
WARRANTY: Colder Products Company warrants its products against defects in workmanship and materials for 90 days from the date of sale by Colder Products Company or its authorized distributor.
This warranty is void if the product is misused, tampered with or used in a manner that is contrary to Colder Product Company's written recommendations and/or instructions. Colder Products Company
does not warrant the suitability of the product for any particular application. Determining product application suitability is solely the customer's responsibility. Colder Products Company is not liable for
consequential or other damages including, but not limited to, loss, damage, personal injury, or any other expense directly or indirectly arising from the use of or inability to use its products either separately
or in combination with other products. ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WHETHER ORAL, WRITTEN OR IN ANY OTHER FORM, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED.
The sole and exclusive remedy under this warranty is limited to replacement of the product or an account credit in the amount of the original selling price, at the option of Colder Products Company.
All allegedly defective products must be returned prepaid transportation to Colder Products Company, together with information describing the product's performance, unless disposition in the field is
authorized in writing by Colder Products Company.
LICP39 © 2002 Colder Products Company
09/02 10M/GG Printed in U.S.A.
Download PDF