FM-750™ or FM-1000 - New Holland PLM Portal

PRECISION FARMING
TRADE UP PROGRAM
Valid until 24th June 2014
Trade now your old display for a new
FM-750™ or FM-1000™
And get FREE unlock codes
For more information
Contact your Regional Precision Farming Specialist.
*If traded solution value = 3 unlock codes
1/10
Guidelines
The purpose of the Display Trade-up program is to assist you in upgrading your customers to the latest
Precision Farming technology. This will enable you to provide your customers with faster service and quicker
turnaround times.
Please read the following information carefully as all the procedures have to be accurately followed for you
to qualify for this program.
Program Rules
The program is valid until 24th June 2014.
To order your replacement display and unlocks, please do the following:
1. Verify that product to trade is on the Trade In Value Sheet (see pages 7 to 10) and verify the number of
unlocks, if any, that are needed for given product.
2. Select and order the SP part number (see page 3) that includes the appropriate number of unlocks you
found in the Trade In Value Sheet (pages 7 to 10).
3. Complete the FM-1000™ and FM-750™ Display Trade-Up Form (see page 4). The completed
form must include the following information:
- The sales order number or purchase order number and the part number for the replacement
display & passcode bundle.
- The serial number of the existing equipment.
- The description of the existing equipment (display, GPS, and Guidance system).
Note: Partially filled out forms will be rejected; you will be required to resubmit the forms.
Please review your form to avoid unnecessary delays.
4. Email the completed form to: trade-up-programs@cnh.com.
They have to be received and approved by CNH before replacement orders are released or shipped.
5. Destroy the trade product as explained in the Proof of Destruction sheet (see page 5) (holes drilled
and connector ends ground down as shown).
6. Photograph the destroyed product showing adequate destruction and serial numbers (see page 6)
and send it by e-mail to trade-up-programs@cnh.com
Note: Because this program highly depends on the clarity and authenticity of photos received to prove
the destruction process, CNH may use photo verification technology to validate photos.
!! ATTENTION the picture of the traded product showing its serial number and proof of destruction needs to be
sent within 30 days after the order date. Please see page 4 & 5 to find out how to provide proof of destruction.
CNH retain the right to invoice at a regular price the unlock received. !!
For more Information
Contact your Precision Farming Specialist.
2/10
Bundle Part Numbers
Select and order your Trade-Up program bundle that includes the appropriate number of unlocks below.
Display
Number of
Unlock Codes
Part number
1
ZTN9481567SP
Description
Price
Display with Upgrade DGPS to OmniSTAR XP/HP, Trade Up
Component P/N: ZTN94000-60, ZTN81507
FM-750™
Display with Upgrade OmniSTAR XP/HP and RTK, Trade Up
2
ZTN9481569SP
Component P/N: ZTN94000-60, ZTN81507, ZTN81509
€1,822
Display with OmniSTAR XP/HP, RTK, and GLONASS, Trade Up
3
ZTN9481560SP
Component P/N: ZTN94000-60, ZTN81507, ZTN81509, ZTN81510
Display with Upgrade DGPS to OmniSTAR XP/HP, Trade Up
1
ZTN9336010SP
Component P/N: ZTN933006000, ZTN69520
FM-1000™
Display with Upgrade OmniSTAR XP/HP and RTK, Trade Up
2
ZTN9336011SP
Component P/N: ZTN933006000, ZTN69521
€3,155
Display with OmniSTAR XP/HP, RTK, and GLONASS, Trade Up
3
ZTN9336012SP
Component P/N: ZTN933006000, ZTN69522
1
ZTN9336310SP
Display with Radio and Upgrade DGPS to OmniSTAR XP/HP,
Trade Up
Component P/N: ZTN933006003, ZTN69520
FM-1000™
Radio
2
ZTN9336311SP
Display with Radio and Upgrade OmniSTAR XP/HP, and RTK,
Trade Up
Component P/N: ZTN933006003, ZTN69521
3
ZTN9336312SP
Display with Radio and Upgrade OmniSTAR XP/HP, RTK, and
GLONASS, Trade Up
Component P/N: ZTN933006003, ZTN69522
• Refer to the Trade In Value Sheet to know how many unlocks you qualify for.
3/10
€4,416
FM-1000™ and FM-750™ Display Trade-Up Return Form
Please fill out this form carefully and email it with the photos proof of destruction to trade-upprograms@cnh.com to participate in the Display Trade-up program.
Your details
Dealer name
Dealer contact
Dealer phone number
Email
Sales order number for FM-1000™/FM-750™
display
Serial number of trade in equipment
Description of trade in equipment
(manufacturer name and model)
• For more information on how to fill out this form please contact your Precision Farming Specialist.
4/10
Proof of Destruction
This bulletin describes how dealers can decommission CNH products in the field, and provide Proof of
Destruction In Field (DIF), as an alternative to returning products.
Process
•
•
•
•
•
•
•
•
This process should only be used if authorized by CNH as part of the Trade In program. If products
are destroyed without instruction or authorization from CNH, the dealer will be responsible for the
cost or repair.
Locate the serial number label of the product to be destroyed. Take care not to damage or deface in
any way the serial number. A clear photograph of the number will be required at the end of the
process.
Use a hand grinder or drill to cut in to the sealed unit or connectors in such a way as to render the
product unusable and beyond repair. The damage to the unit should be adjacent to the serial number
label such that both can be seen in a single photograph. See examples on the following page.
Take a photograph of the serial number and the damage. Make sure that the numbers are in focus and
can be clearly read.
Save the photograph to your computer and give them a name that describes the product and the serial
number, such as <name>_<serial #>.* For example:
Ag252_5432E12345
FM-1000_4325E23451
FM-750_3425E34512
Photographs can be sent as JPEG or as PDF format. The resolution of the photograph should be at
least 1024x768 pixels, and the serial number must be legible.
Send the photograph to the contact at CNH as instructed by the program documents.
Dispose of the product using your local waste electronic equipment regulations.
Audit provisions
Destroyed products should be retained for 30 days after submitting the necessary photograph. CNH retains
the right to audit any DIF claims within 30 days. After 30 days, you are permitted to dispose of the product
in a safe and environmentally acceptable way, without any further approvals.
5/10
Display
Receiver
6/10
Trade In Value Sheet
Entry Level Trade-in products
Photo
Trade in value
Name
FM-750™ or FM-1000™ Display
EZ-Guide Plus
With steering system
not applicable for trade in
1 x GPS Upgrade Free
T-Jet Centerline 220
With steering system
not applicable for trade in
1 x GPS Upgrade Free
Outback S-Lite
With steering system
not applicable for trade in
1 x GPS Upgrade Free
Raven Cruizer and Cruizer II
With steering system
not applicable for trade in
1 x GPS Upgrade Free
AgGPS 170
With nav. controller
not applicable for trade in
1 x GPS Upgrade Free
Trimble Nav. 1 controller
-
not applicable for trade in
-
EZ-Guide 500 DGPS
EZ-Guide 500 XP/HP
EZ Guide 500 RTK
not applicable for trade in
1 x GPS Upgrade Free
2 x GPS Upgrade Free
FMD
1 x GPS Upgrade Free
AgGPS 252 DGPS
not applicable for trade in
AgGPS 252 XP/HP
not applicable for trade in
AgGPS 252 RTK
1 x GPS Upgrade Free
(When traded with applicable display)
7/10
AgGPS 262 DGPS
AgGPS 262 XP/HP
AgGPS 262 RTK
(When traded with applicable display)
not applicable for trade in
1 x GPS Upgrade Free
2 x GPS Upgrade Free
-
AgGPS 332 DGPS
AgGPS 332 XP/HP
AgGPS 332 RTK
(When traded with applicable display)
not applicable for trade in
not applicable for trade in
1 x GPS Upgrade Free
-
AgGPS 432 DGPS
not applicable for trade in
AgGPS 432 RTK
1 x GPS Upgrade Free
AgGPS 442 GLONASS
1 x GPS Upgrade Free
(When traded with applicable display)
JD Display GS 1800
1 x GPS Upgrade Free
JD Display GS1+antenna
1 x GPS Upgrade Free
JD Display GS 2600/2630
2 x GPS Upgrade Free
SF3000 receiver (any accuracy)
1 x GPS Upgrade Free
Ag Leader Integra
2 x GPS Upgrade Free
Ag Leader Versa
1 x GPS Upgrade Free
Ag Leader EDGE
1 x GPS Upgrade Free
Ag Leader Insight
1 x GPS Upgrade Free
8/10
Any Ag Leader/Auto Farm
RTK antenna
1 x GPS Upgrade Free
AutoFarm A5 display
1 x GPS Upgrade Free
Outback Max
Outback Max RTK
With steering system
1 x GPS Upgrade Free
2 x GPS Upgrade Free
3 x GPS Upgrade Free
Outback S3
With Steering
1 x GPS Upgrade Free
2 x GPS Upgrade Free
Outback Sts
With Steering
1 x GPS Upgrade Free
2 x GPS Upgrade Free
Raven Envizio Pro and Pro II
With Steering
1 x GPS Upgrade Free
2 x GPS Upgrade Free
Raven Envizio Pro XL
With Steering
1 x GPS Upgrade Free
2 x GPS Upgrade Free
Raven Viper & Viper II
With Steering
1 x GPS Upgrade Free
2 x GPS Upgrade Free
Raven Viper Pro
With Steering
2 x GPS Upgrade Free
3 x GPS Upgrade Free
9/10
Topcon X20 display
With Steering
1 x GPS Upgrade Free
2 x GPS Upgrade Free
Topcon X20 display
With Steering
1 x GPS Upgrade Free
2 x GPS Upgrade Free
Topcon X30 display for System 350
With Steering
2 x GPS Upgrade Free
3 x GPS Upgrade Free
Beeline Arro/TrueGuide with antenna
1 x GPS Upgrade Free
and control box
Leica Mojo with Antenna
With Steering
10/10
1 x GPS Upgrade Free
2 x GPS Upgrade Free
DISPLAY TRADE UP PROGRAMME - VALID UNTIL 24 JUNE 2014
FM-750 NH
ZTN9481567SP
ZTN9481569SP
ZTN9481560SP
FM-1000 NH
ZTN9336010SP
ZTN9336011SP
ZTN9336012SP
FM-1000 w/ Radio NH
ZTN9336310SP
ZTN9336311SP
ZTN9336312SP
PLM 372
ZTN57513363SP
FM-750 NH with Upgrade DGPS to OmniSTAR XP/HP, Trade Up
ZTN94000-60
FM-750 New Holland - Egnos ready - Europe
ZTN81507
FM-750 Accuracy upgrade : Egnos to OmniSTAR XP/HP
FM-750 NH with Upgrade OmniSTAR XP/HP and RTK, Trade Up
ZTN94000-60
FM-750 New Holland - Egnos ready - Europe
ZTN81507
FM-750 Accuracy upgrade : Egnos to OmniSTAR XP/HP
ZTN81509
FM-750 Accuracy upgrade : OmniSTAR XP/HP to RTK
FM-750 NH with OmniSTAR XP/HP, RTK, and GLONASS, Trade Up
ZTN94000-60
FM-750 New Holland - Egnos ready - Europe
ZTN81507
FM-750 Accuracy upgrade : Egnos to OmniSTAR XP/HP
ZTN81509
FM-750 Accuracy upgrade : OmniSTAR XP/HP to RTK
ZTN81510
FM-750 Accuracy upgrade : RTK to GLONASS
FM-1000 NH with Upgrade DGPS to OmniSTAR XP/HP, Trade Up
ZTN933006000
FM-1000 New Holland - Egnos ready - Europe
ZTN69520
FM-1000 GPS 1 Accuracy upgrade : Egnos to OmniSTAR HP/XP
FM-1000 NH with Upgrade OmniSTAR XP/HP and RTK, Trade Up
ZTN933006000
FM-1000 New Holland - Egnos ready - Europe
ZTN69521
FM-1000 GPS 1 Accuracy upgrade : Egnos to to RTK
FM-1000 NH with OmniSTAR XP/HP, RTK, and GLONASS, Trade Up
ZTN933006000
FM-1000 New Holland - Egnos ready - Europe
ZTN69522
FM-1000 GPS 1 Accuracy upgrade : Egnos to RTK Glonass
FM-1000 NH with Radio and Upgrade DGPS to OmniSTAR XP/HP, Trade Up
ZTN933006003
FM-1000 New Holland - Egnos ready + radio module 430-470 MHz - Europe
ZTN69520
FM-1000 GPS 1 Accuracy upgrade : Egnos to OmniSTAR HP/XP
FM-1000 NH with Radio and Upgrade OmniSTAR XP/HP, and RTK, Trade Up
ZTN933006003
FM-1000 New Holland - Egnos ready + radio module 430-470 MHz - Europe
ZTN69521
FM-1000 GPS 1 Accuracy upgrade : Egnos to to RTK
FM-1000 NH with Radio and Upgrade OmniSTAR XP/HP, RTK, and GLONASS,
Trade Up
ZTN933006003
FM-1000 New Holland - Egnos ready + radio module 430-470 MHz - Europe
ZTN69522
FM-1000 GPS 1 Accuracy upgrade : Egnos to RTK Glonass
PLM 262 to PLM 372 GNSS Receiver, OmniSTAR, New Holland
84588274
ZTN57513367SP
ZTN57513366SP
1
PLM 372 GPS Receiver - RTK ready - GNSS - with mounting plate
Discount %
Discount
Amount
€3,424
€2,054
€1,370
€4,794
€2,054
€1,370
€1,370
€5,141
€2,054
€1,370
€1,370
€347
€1,892
-45%
€1,532
€1,892
-61%
€2,902
€1,892
-63%
€3,249
€4,655
€3,250
€1,405
€6,056
€3,250
€2,806
€6,210
€3,250
€2,960
€3,155
-32%
€1,500
€3,155
-48%
€2,901
€3,155
-49%
€3,055
€5,953
€4,548
€1,405
€7,354
€4,548
€2,806
€4,416
-26%
€1,537
€4,416
-40%
€2,938
3
€7,508
€4,548
€2,960
€4,416
-41%
€3,092
1
€3,860
€3,860
€4,558
€4,558
€4,558
€4,558
€2,208
-43%
€1,652
€2,524
-45%
€2,034
€3,155
-31%
€1,403
2
3
1
2
3
1
2
2
PLM 372 GPS Receiver - RTK ready - GNSS - with mounting plate
PLM 252 to PLM 372 GNSS Receiver, RTK, New Holland
84588278
Promo Net
Old Net price Price
PLM 372 GPS Receiver - Omnistar ready - GNSS - with mounting plate
PLM 262 to PLM 372 GNSS Receiver, RTK, New Holland
84588278
Number of
unlocks
2