SOUNDLINK
®
WIRELESS MOBILE SPEAKER
Owner’s Guide | Guía de usuario | Notice d’utilisation
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
SAFETY INFORMATION
Please read this owner’s guide
WARNINGS and CAUTIONS
Please take the time to follow the instructions in this
owner’s guide carefully. It will help you to properly use
your new Bose® product and enjoy its features. Please
save this owner’s guide for future reference.
• To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture. The product
shall not be exposed to dripping or splashing, and
objects filled with liquids, such as vases, shall not be
placed on or near the product. As with any electronic
products, use care not to spill liquids into any part of the
product. Liquids can cause a failure and/or a fire hazard.
• The power supply must be used indoors only. It is
neither designed nor tested for use outdoors, in recreation vehicles, or on boats.
• Make no modifications to the product or accessories.
Unauthorized alterations may compromise safety,
regulatory compliance, and system performance, and
will void the warranty.
• Where the mains plug or appliance coupler is used as
the disconnect device, such disconnect device shall
remain readily operable.
• Do not place any naked flame sources, such as lighted
candles, on or near the apparatus.
• Contains small parts that may be a choking hazard. Not
suitable for children under age 3.
• Before use, charge the battery using only the power
supply provided with the system. Refer to charging
instructions in the system owner’s guide. Do not
continue charging the battery if it does not reach full
The lightning flash with arrowhead symbol within
an equilateral triangle alerts the user to the
presence of uninsulated, dangerous voltage within
the system enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle
alerts the user to the presence of important
operating and maintenance instructions in this
owner’s guide.
2
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
SAFETY INFORMATION
•
•
•
•
•
•
charge within the specified charging time. Overcharging
may cause the battery to become hot, rupture, or ignite.
If you see any heat deformation or leakage, properly
dispose of the battery.
Do not attempt to charge the battery in temperatures
outside the range of 32°-104°F (0°-40°C).
Keep batteries out of the reach of children and pets.
If the battery begins to leak, do not allow the liquid to
come in contact with your skin or eyes. If contact has
been made, wash the affected area with plenty of water
and seek medical advice immediately.
Do not expose the product or battery to excessive heat,
including direct sunlight or fire and storage or use inside
cars in hot weather, where it can be exposed to temperatures in excess of 140°F (60°C). Doing so may cause
the battery and power supply to generate heat, rupture,
or ignite. Using the product in this manner also may
result in a loss of performance and a shortened life
expectancy.
If the battery is damaged and ignites, do not use water
to extinguish flames. Instead, use a functioning fire
extinguisher.
Do not step on, throw, or drop batteries or the power
supply or expose them to a strong shock. Do not pierce,
crush, dent, or deform the batteries or power supply in
•
•
•
•
•
•
•
any way. If either becomes deformed, properly
dispose of it.
Do not short-circuit batteries. Avoid storing them
around metal objects such as keys, pocket change,
paper clips, and jewelry.
Do not dismantle, open, or shred the battery.
The battery is intended to be used only with the Bose
product and the power supply provided with it.
This product is intended to be used only with the power
supply provided, or Bose power supply or charger
designed for use with this product.
After extended periods of storage, it may be necessary
to charge and discharge the battery several times to
obtain maximum performance.
The cells in the batteries perform best when operating
at normal room temperature, 70°F (20°C).
Replace the SoundLink® system battery only with a
genuine replacement battery from Bose or an authorized Bose dealer. Bose cannot warrant the safety and
compatibility or assure the operability of batteries from
other manufacturers for use in operating the SoundLink
system. DO NOT attempt to use the SoundLink system
battery to power other electronics. Doing so may result
in permanent damage to your system and/or personal
injury.
3
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
SAFETY INFORMATION
• Long-term exposure to loud music may cause hearing
damage. It is best to avoid extreme volume when
listening to audio for extended periods.
This product contains magnets which can be
harmful to pacemaker wearers.
Please dispose of a used or damaged battery
promptly and properly, following all local
regulations. Do not incinerate.
To return a system battery for recycling, contact
Bose or your Bose dealer. In the United States only,
call 1-800-905-2180 or visit the Bose® website at
www.Bose.com. For other regions, see the contact
information included in the carton.
This product conforms to all EU Directive
requirements as applicable by law.
The complete Declaration of Conformity can
be found at www.Bose.com/static/compliance
Important Safety Instructions
1. Read these instructions – for all components before
using this product.
2. Keep these instructions – for future reference.
3. Heed all warnings – on the product and in the owner’s
guide.
4. Follow all instructions.
4
5. Do not use this apparatus near water or moisture –
Do not use this product near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, near a
swimming pool, or anywhere else that water is
present.
6. Clean only with a dry cloth – and as directed by Bose
Corporation. Unplug this product from the wall outlet
before cleaning.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions –
To ensure reliable operation of the product and to
protect it from overheating, put the product in a
position and location that will not interfere with its
proper ventilation. For example, do not place the
product on a bed, sofa, or similar surface that may
block the ventilation openings. Do not put it in a
built-in system, such as a bookcase or a cabinet that
may keep air from flowing through its ventilation
openings.
8. Do not install near any heat sources, such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Only use attachments/accessories specified by the
manufacturer.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
SAFETY INFORMATION
receptacles, and the point where they exit from the
apparatus.
11. Unplug this apparatus during lightning storms or
when unused for long periods of time – to prevent
damage to this product.
12. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way: such as power supply cord or
plug is damaged; liquid has been spilled or objects
have fallen into the apparatus; the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped – Do not attempt to
service this product yourself. Opening the enclosure
may expose you to dangerous voltages or other
hazards. Please call Bose to be referred to an authorized service center near you.
13. To prevent risk of fire or electric shock, avoid
overloading wall outlets, extension cords, or integral
convenience receptacles.
14. Do not let objects or liquids enter the product – as
they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
15. See product enclosure for safety-related markings.
16. Use proper power sources – Plug the product into a
proper power source, as described in the operating
instructions or as marked on the product.
Information about products that
generate electrical noise
The SoundLink® wireless mobile speaker complies with
FCC and Industry Canada RF radiation exposure limits set
forth for general population. The system must not be colocated or operating in conjunction with any other
antennas or transmitters.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
U.S.A. only
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, this is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, you are encouraged to try to correct the
interference by one or more of the following measures:
5
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
SAFETY INFORMATION
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a different circuit
than the one to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Any changes to this device not expressly approved by
Bose Corporation may void the user’s authority to operate
this device.
Canada
• This Class B digital apparatus complies with the
Canadian ICES-003 Class B specification.
• The radio communication device incorporated into this
apparatus meets all requirements of the Industry
Canada standard RSS-210.
For your records
Serial number (on the back panel): _______________________________________________________________________________
Purchase date: ________________________________________________________________________________________________
Dealer name: __________________________________________________________________________________________________
Dealer phone: _________________________________________________________________________________________________
Please keep your sales receipt with this owner’s guide.
6
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . 8
Overview . . . . . . . . . . . . . . . . . . . . . . . . . 8
Unpacking . . . . . . . . . . . . . . . . . . . . . . . 8
Opening the cover . . . . . . . . . . . . . . . . . 9
Placing the speaker . . . . . . . . . . . . . . . 10
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting to AC power . . . . . . . . . . . 11
System status indicators . . . . . . . . . . . 13
Control buttons . . . . . . . . . . . . . . . . . . . 14
Pairing with Bluetooth® devices . . . . . . 15
Adding another source . . . . . . . . . . . . . 18
Operating on battery power . . . . . . . . . 19
MAINTENANCE AND CARE . . . . . . . . . . . . . .
Replacing the battery . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . .
Cleaning . . . . . . . . . . . . . . . . . . . . . . . .
Contacting customer service . . . . . . . .
Limited warranty . . . . . . . . . . . . . . . . . .
Technical information . . . . . . . . . . . . . .
20
20
25
29
29
29
30
7
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
INTRODUCTION
Overview
®
Thank you for purchasing the SoundLink
wireless mobile speaker. Now you can enjoy
music from your smartphone or portable
media player anywhere you choose,
without wires.
Features
If any part of the product appears to be
damaged, do not attempt to use it. Contact
your authorized Bose dealer immediately or
call Bose Customer Service. Refer to the
contact list enclosed in the carton for
contact information.
SoundLink® wireless mobile speaker
• Wireless Bluetooth® link eliminates the
need to dock or physically connect your
Bluetooth® device.
• Rechargeable lithium-ion battery provides
hours of Bose® performance.
Unpacking
Check the carton for the SoundLink® wireless
mobile speaker, power supply, and 3.5 mm
stereo cable. Save the carton and packing
materials, which provide the safest way to
transport this product.
8
Power supply
3.5 mm stereo
cable
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
INTRODUCTION
Opening the cover
2. Swing the cover down and under the unit.
When closed, the cover protects the
SoundLink® wireless mobile speaker from
damage. When opened, the cover serves as
a stand for the speaker. No sound is emitted
from the speaker unless the cover is opened.
To open the cover
1. Pull on the fabric tab imprinted with the
Bose® logo.
When you close the cover, magnets hold it in
place. If you close the cover while audio is
playing, the speaker turns itself off.
9
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
INTRODUCTION
Placing the speaker
®
When using your SoundLink wireless mobile
speaker indoors, the tonal quality can vary
depending on where the speaker is placed in
a room. When moving the speaker around
within a room or from room to room, keep
the following guidelines in mind:
• The speaker is designed to sound best
when placed on a shelf, counter, desk, or
table top that is 24 to 48 inches high.
• For best bass response, the speaker
should be placed near a wall; bass
response decreases as the speaker is
placed closer to the center of a room.
• When operating the speaker, always use
the cover as a stand. Do not lay the
speaker on its back. Sound is emitted from
both the front and rear of the unit.
10
• The speaker should not be placed in small
areas that are enclosed on all sides except
the front as this will adversely affect sound
quality.
• Do not place the speaker on wet or dirty
surfaces. Doing so could transfer dirt,
sand, or moisture onto the speaker when
the cover is closed.
If you are using your speaker outdoors, you
should expect the tonal quality to change as
you move farther from the speaker.
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
OPERATION
Connecting to AC power
A. Unfold prongs
Before using your new SoundLink® wireless
mobile speaker the first time, you should
connect it to AC power.
To connect to AC power
1. Depending on your region of the world,
do one of the following to prepare your
power pack for use:
A. Unfold the prongs from the
power pack body
B. Slide AC adapter into power pack
AC
adapter
OR
B. Slide the AC adapter for your
region into the power pack.
Power
pack
11
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
OPERATION
2. Plug the DC power cord on the power
supply into the DC connector on the
SoundLink® speaker.
A tone is emitted from the speaker to
confirm connection to AC power, and
charging begins.
3. Plug the power supply into a live AC
outlet.
You can immediately use your SoundLink
speaker once it is connected to AC
power.
12
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
OPERATION
System status indicators
The status indicators, located on the front of
the SoundLink® speaker, illuminate to indicate
when a source or feature is activated.
Indicates the speaker is playing the
source connected to the
(AUX) input.
Indicates the SoundLink speaker state
when the Bluetooth® source is selected:
• Discoverable – Speaker is discoverable
and ready to pair with a new device.
The indicator slowly fades on and off
approximately once every second.
• Connecting – Speaker is not
connected to any device, but
attempting to connect to a paired
device. The indicator flashes on and
off approximately twice every
second.
• Connected – Speaker is connected
to a paired device. The indicator
remains steadily on.
• Disconnected – Speaker is available
to connect to any paired device. The
indicator flashes on and off
approximately once every three
seconds.
13
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
OPERATION
See “Pairing with Bluetooth® devices”
on page 15 for more information on
using Bluetooth®.
Indicates the battery power level. See
“Operating on battery power” on
page 19 for more information on
reading the indicator.
Flashes to indicate when the sound is
muted.
14
Control buttons
The control buttons are located on the top of
the speaker.
• Press to turn the speaker on or off.
• Press and hold to check the
battery charge state (see
“Checking the battery” on
page 19).
Press to select the source
connected to the
(AUX) input.
See “Adding another source” on
page 18.
•Press to select the Bluetooth®
source. The speaker attempts to
connect to the last paired device.
See “Pairing with Bluetooth®
devices” on page 15.
• Press and hold for 3 seconds to set
the speaker to discoverable mode
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
OPERATION
and allow pairing with another
Bluetooth® device.
• When a device is connected, press
to disconnect the device. The
SoundLink® speaker then waits for
a paired device to connect.
If no device connects within 30
minutes, the speaker turns itself off.
Mutes sound from the speaker.
Increases speaker volume. The
source indicator on the front panel
flashes when maximum volume is
reached.
Deceases speaker volume. The
source indicator on the front panel
flashes when minimum volume is
reached.
Pairing with Bluetooth® devices
Pairing occurs when two Bluetooth® devices
communicate with each other and establish
a connection. A record of information about
this connection is then stored in the memory
of each device. Once you pair a device with
the SoundLink® speaker, you should not
have to pair it again.
The SoundLink speaker can pair with up to 6
Bluetooth® devices. However, it can only
connect to one device at a time.
To begin pairing with a Bluetooth®
device
1. With the Bluetooth® device and the
SoundLink speaker both turned on, press
the Bluetooth® button on the speaker for
three seconds to make the speaker discoverable.
15
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
OPERATION
The Bluetooth® indicator on the
SoundLink speaker slowly fades on and
off approximately once every second to
show that the speaker is discoverable.
2. Set your Bluetooth® device to “discover”
the SoundLink speaker, then locate the
Bluetooth®device list.
3. Move down the device list and select the
device named “SoundLink.”
4. If your device asks for a passkey, enter
digits 0000 and press OK. Some devices
also ask you to accept the connection.
Your Bluetooth® device indicates when
pairing is complete and the SoundLink
speaker emits a tone to indicate a
successful connection. The Bluetooth®
indicator on the SoundLink speaker stops
fading on and off and remains steadily on.
16
To connect a device
To connect a previously paired device, press
the Bluetooth® button on the SoundLink®
speaker. The Bluetooth® indicator on the
speaker flashes on and off approximately
twice every second until the device
connects. Then the indicator stops flashing
and remains steadily on.
To pair additional devices
With the Bluetooth® device and the
SoundLink speaker both turned on, press
the Bluetooth® button on the speaker for
three seconds to make the speaker
discoverable again. Then follow steps 2 - 4
beginning on page 16.
The SoundLink memory can hold up to six
paired devices. You can pair more than six
devices, but the memory will never contain
more than six. When the memory is full with
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
OPERATION
six devices and an additional device is
paired, the least used device is deleted from
memory and replaced by the newly paired
device.
To pair with a Bose® preferred device
A Bose preferred device is a Bluetooth®
device produced by Bose.
1. Activate a Bose preferred device (within
range of the SoundLink speaker).
Clearing memory
To clear the SoundLink speaker memory of
all devices, press and hold the Bluetooth®
button on the speaker (about 10 seconds)
until you hear a tone.
The SoundLink® speaker clears all
Bluetooth® devices from its memory, then
becomes discoverable.
2. Press the Bluetooth® button on the
speaker for three seconds to make the
speaker discoverable.
3. The SoundLink speaker immediately
pairs with the Bose preferred device.
17
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
OPERATION
Adding another source
You can use another audio device, such as a
portable digital music player, with your
SoundLink® speaker. This requires using an
audio cable with a 3.5 mm plug on one end
to connect with the AUX input on the
SoundLink® system. A cable with a 3.5 mm
plug on both ends is provided.
To add a source
1. Plug the cable from the audio device into
the
(AUX) connector on the back of
the SoundLink speaker.
2. Press the AUX button.
3. Adjust the volume on the connected
device to near maximum, then use the
SoundLink® speaker volume buttons to
adjust the level.
18
If a device is connected but not playing
audio, the speaker will turn itself off after 30
minutes.
Service connector
The service connector on the rear of the
speaker is for software updates only and will
not play audio from any connected device.
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
OPERATION
Operating on battery power
A fully charged battery provides approximately
three hours of use at maximum volume. The
rate of battery discharge varies with the
volume setting. You can extend the battery
charge by reducing the volume.
Checking the battery
The battery status indicator is normally off to
conserve battery power. To check the charge
level, press and hold the power button and
observe the battery indicator.
Solid green: .....70% or more of full charge
Solid yellow: ....20% to 70% of full charge
Flashing red: ....20% or less (charge needed)
Battery protection mode
When the SoundLink® speaker is unplugged
and unused for more than 14 days, it enters
battery protection mode to preserve battery
power. To reactivate the speaker, connect it
to AC power (see “Charging the Battery,”
below). You can immediately use the system
while the battery charges.
Charging the battery
The battery status indicator on the SoundLink®
speaker flashes red when the battery needs
charging. The battery can be charged whether
the cover is opened or closed.
To charge the battery
Plug the power pack into a live AC outlet and
plug the cord into the DC POWER connector
on the back panel of the SoundLink speaker.
The speaker emits a tone to confirm the
power connection. Recommended charging
time is 3 hours. The battery status indicator
indicates charging status.
Yellow: ...... Battery charging
Off: ........... Charging cycle done
19
Tab 8, 16
Tab 7, 15
MAINTENANCE
AND
Tab 6, 14
Tab 5, 13
CARE
Replacing the battery
The battery should be replaced when:
• The battery status light remains yellow after
10 hours of charging.
• The period of battery operation noticeably
decreases.
For replacement batteries contact the Bose
organization in your country/region (visit
http://global.Bose.com for Bose contact
information in your country or region) f
To replace the battery
1. Using the 2.5 mm hex wrench supplied
with the replacement battery, remove the
two screws at the bottom of the speaker.
20
Tab 4, 12
Tab 3, 11
Tab2, 10
English
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
MAINTENANCE AND CARE
2. Push up on the back of the cover until it
slides up slightly.
3. Pull the cover up and away from the
speaker back.
21
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
MAINTENANCE AND CARE
4. Using the 2.5 mm hex wrench, remove the
two screws securing the battery (located
near the bottom of the speaker).
CAUTION: Make sure to remove only the
screws pictured above.
22
5. Pull the battery straight out of the
speaker.
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
MAINTENANCE AND CARE
6. Replace the battery with a new one.
7. Replace the screws in the battery and
tighten with the 2.5 mm hex wrench.
8. Align the holes inside the cover with the
anchor posts on the back of the speaker,
and press the cover into place.
Note: Replace the SoundLink® speaker battery
only with a genuine replacement battery from Bose
or an authorized Bose dealer.
23
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
MAINTENANCE AND CARE
9. Slide the cover down on the anchor
screws until it stops.
10.Replace and tighten the screws in the
bottom of the cover.
24
Tab 4, 12
Tab 3, 11
Tab2, 10
English
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
MAINTENANCE AND CARE
Troubleshooting
Problem
What to do
Speaker will not turn on
(AC power)
• Make sure your system is connected to a working AC outlet.
Speaker will not turn on
(battery power)
• Battery may be in protection mode or discharged – connect to working AC
source to restore the battery to operational mode.
• Battery may not be fully charged – press and hold the Power button for
three seconds to check battery status.
Paired Bluetooth® device
will not connect
• If your device requires a passkey, make sure the one you entered was
correct.
• Pair the device and the SoundLink® speaker again.
• Turn the SoundLink® speaker off and back on.
SoundLink® speaker
• Turn off or disable Bluetooth® on all other paired devices nearby (including
indicates a connection, but
a Bose® preferred device) and reconnect the device you want to hear.
is not playing music
• Turn the SoundLink® speaker off and back on.
25
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
MAINTENANCE AND CARE
Problem
Cannot pair the
SoundLink® speaker with
my Bluetooth® device
26
What to do
®
• Make sure your SoundLink speaker is discoverable. Press and hold the
Bluetooth® button (3 seconds) until the Bluetooth® indicator slowly flashes.
• Make sure the Bluetooth® capability of your Bluetooth® device is turned on.
• Your Bluetooth® device may be out of range – try moving it closer to the
SoundLink speaker.
• Make sure your Bluetooth® device supports the transfer of audio.
• Move your Bluetooth® device and/or SoundLink speaker away from other
devices that generate electromagnetic interference. Examples are cordless
phones, microwave ovens, wireless network routers, or other Bluetooth®
devices.
• If possible, turn off all other nearby Bluetooth® devices or disable their
Bluetooth® functionality.
• Turn the SoundLink speaker off and back on.
• Refer to the owner’s guide, help system, or technical support for your
mobile device to learn how it pairs with other Bluetooth® devices.
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
MAINTENANCE AND CARE
Problem
What to do
®
Poor sound quality from a • Your Bluetooth device may be out of range – try moving it closer to the
Bluetooth® device
SoundLink speaker.
• Move your Bluetooth® device and/or SoundLink® speaker away from any
device that generates electromagnetic interference, such as another
Bluetooth® device, cordless phone, microwave oven, or wireless router.
• Reduce the number of applications running on your Bluetooth® device.
Running multiple applications can reduce the amount of internal resources
available to transmit audio. Closing non-essential applications may
improve audio quality.
• Try turning off WiFi to improve audio quality.
• Try unpairing your Bluetooth® device from the SoundLink speaker and then
re-pairing the two. This action can possibly clear issues that might have
occurred during initial device pairing.
• Reset the SoundLink speaker: Press the mute button for 10 seconds. Your
Bluetooth® device is disconnected and the SoundLink speaker turns off.
• Turn the SoundLink speaker off and back on.
27
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
MAINTENANCE AND CARE
Problem
What to do
®
No audio from a
Bluetooth® device
• Make sure your SoundLink speaker is not muted, and the volume is up.
• Make sure your Bluetooth® device is playing audio, and the volume is up.
• Your Bluetooth® device may be out of range – try moving it closer to the
SoundLink speaker.
• Turn the SoundLink speaker off and back on.
No audio from the AUX
source
•
•
•
•
•
Poor sound quality from
the AUX source
• Reduce the volume level on the AUX source.
• Make sure the 3 mm plug is fully inserted into the SoundLink speaker.
28
Make sure your connected device is on and playing.
Press the AUX button and check that the AUX source indicator is on.
Make sure the 3 mm plug is fully inserted into the SoundLink speaker.
Increase the volume level on the device.
Increase the SoundLink speaker volume.
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
MAINTENANCE AND CARE
Cleaning
To clean the exterior surface of your product,
you can wipe it using a soft, dry cloth.
• Do not use solvents, chemicals, or sprays.
• Do not allow liquids to spill or objects to
drop into any openings.
Contacting customer service
For questions about the SoundLink® wireless
mobile speaker, contact your local Bose
dealer. To contact Bose directly, see the
contact list included with your SoundLink
speaker or visit http://owners.Bose.com on
the Internet.
Limited warranty
Your SoundLink® wireless mobile speaker is
covered by a limited warranty. Details of the
limited warranty are provided on the product
registration card that is included in the carton.
Please refer to the card for instructions on
how to register. Failure to register will not
affect your limited warranty rights.
What you must do to obtain limited
warranty service
Return the product, with proof of purchase
from an authorized Bose dealer, using the
following procedures:
1. Contact the Bose organization in your
country/region
(visit http://global.Bose.com for Bose
contact information in your country or
region) for specific return and shipping
instructions.
2. Label and ship the product, freight
prepaid, to the address provided by the
Bose organization in your country.
29
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
MAINTENANCE AND CARE
3. Place any necessary return authorization
number prominently on the outside of the
carton. Cartons not bearing a return
authorization number, where required, will
be refused.
Technical information
Power supply rating
Input: 100 - 240VAC, 50/60Hz, 600mA
Output: 17VDC, 1A Max
Product supply rating
Input: 17 - 20 VDC, 1A Max
Dimensions
6.7" H x 9.75"W x 1.9"D (17.0 cm x 24.8 cm
x 4.8 cm)
Weight
2.9 lb. (1.3 kg)
Temperature range for use
0° - 45°C (32° - 113°F)
Bluetooth® QD ID
SoundLink® speaker: B017612
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Bose Corporation is under
license.
30
©2011 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM344922 Rev.00
Download PDF

advertising