B A S I C
&
A D V A N C E D
WITH
FILTER TECHNOLOGY
Faucet Filtration System
Owner’s Manual
Easy to Attach
Faucet Unit Model No. PFM100B, PFM150W, PFM400H, PFM450S and PFM470S.
Replacement Filter Model No. RF-3375 and RF-9999.
Step 3: System Installation Instructions
Your PUR System
Thank you for choosing PUR! Clean drinking water is the foundation
of good health. Our patented and certified water filtration systems
with MAXION T echnology will transform your tap water into clean,
fresh-tasting drinking w
ater. To learn more about PUR,
please visit PUR.com.
What’s in the Box
1 PUR Device
Bag Containing 3 Back-up Adapters and Washers
Some faucets may not need an adapter.
If an adapter is needed, choose the one that fits your faucet.
1
2
3
External Threaded Faucets
If the device does not fit, attach adapter 1. Finger-tighten the
adapter and washer
to your faucet.
Insert filter into the device (Don’t worry, the filter will fit loosely)
STOP!
If the enclosed adapters do not fit, please do not return to store.
Contact PUR for a free adapter that fits your faucet: PUR.com/support 1-800-PUR-LINE ConsumerRelations@kaz.com
Position the device so that the PUR® logo is facing you. Finger-tighten the threaded
mounting nut, turning counterclockwise, to attach the device to your faucet .
Replace back cover
Step 4: Turn on Filtered Water
Step 2: Aerator Removal
Remove your original aerator and its washer.
Use a rubber jar opener if aerator is difficult to remove.
Internal Threaded Faucets
Attach adapter 2. If adapter 2 does
not fit, try adapter 3. Finger-tighten the
adapter and washer
to your faucet.
IMPORTANT: Device needs to be level to fasten evenly.
Step 1: Filter Installation Instructions
Twist back cover off
If the device does not fit your faucet use one of the supplied adapters.
Internal Threaded
Faucets
External Threaded
Faucets
1 Filter
Cartridge
First try attaching the device by itself.
You may not need an adapter.
Turn down the lever f or filtered water.
Before first use, run cold water for
5 minutes in filtered position.
CleanSensor™ Monitor
When filtered water is activated the CleanSensor™ Moniter indicates filter status
and guarantees you will always have safer and healthier filtered, drinking water.
Green light will flash 6 times as you begin to use the filter. Replacement of filter
cartridge resets the light.
The CleanSensor™ Moniter changes color depending on how long filter has been
in use or how much water has been filtered. Filter will reach end of life at 100+
gallons or 90+ days.
The CleanSensor™ Moniter contains a non-replaceable battery. Filter is working Change filter soon End of filter life
The battery will eventually stop working but the filter is still functional.
Use and Care
Before first use, run cold water for 5 minutes in filtered position.
During filter flush, it is normal to see cloudy w
ater and hear the sound of
water pushing air out of the filter cartridge. Flushing removes any loose
materials, which is normal.
Prior to each use, run cold water for 5 seconds in filtered position to activate filter.
Never run hot water through the filter.
Do not use the water above 100˚F/38˚C as this may alter the filter.
Use cold water only.
Change your filter every three months for best performance.
To change the filter or if you need sink space, remove the device from your
faucet by unscrewing the threaded mounting nut. After each new filter
cartridge is installed, run cold water for 5 minutes to flush it.
Clean the exterior of the faucet mount housing with a damp sponge o r soft cloth.
A mild dishwashing liquid may also be used. Using anything else to clean your faucet mount could result in damage to the unit.
For more information, please visit PUR.com/support
Two Year Warranty
Kaz (Warrantor), warrants your PUR Faucet Filtration Unit (PFM100B, PFM150W, PFM400H, PFM450S,
PFM470S) for two (2) years from the date of purchase (except for the filter cartridge which is warranted
for 30 days) against all defects in materials and workmanship, when used in compliance with the owner’s
manual. If the product proves to be defective within two years from the date of purchase, call 1-800-787-5463.
The warrantor assumes no responsibility for incidental or consequential damages; for damages arising out
of misuse of the product or use of any unauthorized attachment; or for damages resulting from the use of
the product with a defective water faucet. Some states do not allow the exclusion or limitation of incidental
or consequential damages; so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may have other legal rights which vary from s tate to
state. System complies with applicable state and local regulations.
Should service be required or you have any questions regarding how to use your PUR product, please
contact PUR Consumer Relations: PUR.com/support 1-800-PUR-LINE ConsumerRelations@kaz.com
Troubleshooting
• You may not need an adapter. After original aerator and washer are removed, try attaching the device to your faucet. If adapter is needed, check to make sure the old aerator washer was removed and only the new adapter washer is being used.
• Make sure device is level to the faucet in order for the threaded mounting nut to attach to the faucet threading. Turn counterclockwise to tighten.
Installation issues
Water leaks around the
faucet adapter or threaded
mounting nut
• Check to see that the washer and screen a re placed
in the threaded mounting nut.
• If using an adapter, make sure the adapter is
hand-tightened securely to the faucet.
Slow water flow, after 3 months
of use, in the filtered position
• When filter is near end of life, water will run slower in the filtered position. Replace your filter to ensure contaminant removal at the certified levels.
Water leaks around the
filter cover
• Try tightening faucet mount back cover all the way until tight. If that doesn’t solve the problem, remove the filter cartridge and reinstall the filter cartridge again.
Difficulty removing the old filter
cartridge to replace the filter
• Remove the device from the faucet by turning the threaded mounting nut clockwise.
• Remove the cover.
• Slowly turn or twist the filter cartridge. This will help
loosen the filter.
Technical Specifications:
FILTER CAPACITY: 100 gallons (378 liters)/up to 3 months
RATED SERVICE FLOW: 0.52 gallons/minute (2.0 liters/minute) at 60 psig
MAXIMUM TEMPERATURE: 100°F (38°C) MAXIMUM WORKING PRESSURE: 100 psig (690 kPa)
MINIMUM TEMPERATURE: 34°F (1°C)
MINIMUM WORKING PRESSURE:
20 psig (138 kPa)
For system to perform as shown in the Performance Data Sheet, it is necessary to replace the filter
when it exceeds filter capacity (100 gallons). Testing was performed under standard laboratory conditions, actual performance may vary.
The contaminants or other substances removed or reduced by this water filter are not necessarily in
all users’ water. Do not use with water that is microbiologically unsafe, or of unknown quality, without
adequate disinfection before or after the system. Systems that are certified for cyst reduction may be
used on disinfected water that may contain filterable cysts. Individuals requiring water of certain
microbiological purity should consult their physician. Replacement filters may be purchased at most
retail outlets or at pur.com.
You can fully recycle all of your PUR products and packaging free of charge
through our partnership with TerraCycle®. Join the PUR Brigade® to recycle
your old products and help us create a cleaner future. Please visit
PUR.com/recycle to learn more.
PFM100B, PFM150W, PFM400H, PFM450S, PFM470S
Systems Tested and Certified by NSF International against NSF/ANSI Standards 42, 53 and 401 for the
reduction of the claims specified on the Performance Data Sheet.
Performance Data Sheet
For Basic Faucet Mount Unit Model No. PFM100B, PFM150W. Replacement Filter Model No. RF3375.
Advanced F aucet Mount PFM400H, PFM450S and PFM470S. Replacement Filter Model No. RF-9999.
These systems have been tested according to NSF/ANSI 42, 53 and 401 for reduction of the substances
listed below. The concentration of the indicated substances in water entering the system was reduced to
a concentration less than or equal to the p ermissible limit for water leaving the system, as specified in
NSF/ANSI 42, 53 and 401.
NSF/ANSI Standard Requirements
PUR Reduction data
Substance
Substance
Standard 42 - Aesthetic Effects
Standard
42Taste
- Aesthetic
Effects
Chlorine
and Odor
Chlorine
Taste
and OdorClass I
Nominal
Particulate
particles
0.5 to <1
µm I
Nominal
Particulate
Class
particles
0.5 to
µm Effects
Standard
53<1
- Health
Standard
53 - Health Effects
Asbestos
Asbestos
Cyst
PUR Reduction data
Overall % Reduction
Overall % Reduction
96%
96%
98.8%
98.8%
> 99%
>>
99%
99.99%
Cyst2 ,4-D
2 ,4-D
2,4, 5-TP (Silvex)
2,4,Atrazine
5-TP (Silvex)
> 99.99%
93.8%
Atrazine
Benzene
Benzene
Carbofuran
> 94.2%
> 96.7%
Carbofuran
Carbon Tetrachloride
Carbon
Tetrachloride
Chlordane
> 98.8%
> 96.8%
Chlordane
Endrin
Endrin
Ethylbenzene
> 99.5%
> 96.8%
Ethylbenzene
Heptachlor Epoxide
Heptachlor
Epoxide
Lead (pH6.5)
Lead
(pH6.5)
Lead
(pH8.5)
99.9%
> 99.6%
> 99.6%
>99.7%
Lead
(pH8.5)
Lindane
Lindane
Mercury (pH6.5)
Mercury
(pH6.5)
Mercury
(pH8.5)
Mercury
(pH8.5)
Methoxychlor
Methoxychlor
Monochlorobenzene
Monochlorobenzene
o-Dichlorobenzene
o-Dichlorobenzene
Simazine
Simazine
Styrene
Styrene
Tetrachloroethylene
Tetrachloroethylene
Toluene
Toluene
Toxaphene
Toxaphene
Trichloroethylene
Trichloroethylene
TTHM
TTHM
VOC (chloroform surrogate)
VOC (chloroform surrogate)
93.8%
99.7%
99.7%
> 94.2%
NSF/ANSI Standard Requirements
% Reduction Reqirement /
Influent challenge
Maximum permissible product
Reqirement(mg/L)
/
concentration
water concentration
Influent
challenge(mg/L) % Reduction
Maximum permissible product
concentration (mg/L)
water concentration (mg/L)
2.0 mg/L ± 10%
2.0atmg/L
10%
least±10,000
particles/mL
at least
10,000
particles/mL
107 to 108 fibers/L; fibers
greater than 10 µm in length
107 to 108 fibers/L; fibers
greater than 10 µm in length
minimum 50,000/L
minimum
50,000/L
0.210
± 10%
0.210
± 10%
0.15
± 10%
≥ 50%
≥ 50%
≥ 85%
≥ 85%
99%
99%
99.95%
99.95%
0.07
0.070.05
0.15
± 10%
0.009
± 10%
0.009
± 10%
0.015
± 10%
0.05
0.003
0.003
0.005
0.015
± 10%
0.08
± 10%
0.08
± 10%
0.015
± 10%
0.005
0.04
0.04
0.005
0.015
± 10%
0.04
± 10%
0.04
± 10%
0.006
± 10%
0.005
0.002
0.002
0.002
0.0062.1
±±
10%
10%
2.10.004
± 10%
± 10%
0.0020.7
0.7
0.0002
0.004
± 10%
0.15
± 10%
0.150.15
± 10%
± 10%
0.0002
0.010
0.010
0.010
>99%
> 96.5%
> 96.5%
96.0%
0.15
± 10%
0.002
± 10%
0.002
± 10%
0.006
± 10%
0.006
± 10%
0.006
± 10%
0.010
0.0002
0.0002
0.002
0.002
0.002
96.0%
99.8%
99.8%
>99.9%
0.006
± 10%
0.12
± 10%
0.122.0
± 10%
± 10%
0.002
0.04
0.040.1
>99.9%
> 99.9%
> 99.9%
> 98.5%
2.0 1.8
± 10%
± 10%
0.1 0.6
1.80.012
± 10%
± 10%
0.0122.0
±±
10%
10%
0.60.004
0.0040.1
2.00.015
± 10%
± 10%
0.0153.0
±±
10%
10%
0.10.005
0.0051
3.00.015
± 10%
± 10%
0.015
± 10%
0.300
± 10%
10.003
0.003
0.005
0.300
± 10%
0.45
± 20%
0.45 ±0.300
20%
0.005
0.080
0.080
0.015
> 96.7%
> 98.8%
> 96.8%
> 99.5%
> 96.8%
99.9%
>99.7%
99.9%
99.9%
>99%
> 98.5%
> 99.9%
> 99.9%
>96.7%
>96.7%
>99.9%
>99.9%
> 92.9%
> 92.9%
> 99.8%
> 99.8%
99.7%
99.7%
99.3%
99.3%
0.300
0.015
PFM100B, PFM150W, PFM400H, PFM450S, PFM470S
Systems Tested and Certified by WQA against NSF/ANSI Standards 42, 53 and 401 for the reduction of
the claims specified on the Performance Data Sheet.
VOC (reduction claims for organic chemicals included by chloroform surrogate testing)
VOC (reduction claims for organic chemicals included by chloroform surrogate testing)
Maximum permissible product
Influent challenge
Chemical Reduction %
Substance
water concentration (mg/L)
concentration
Influent
challenge (mg/L) Maximum permissible product
Chemical Reduction %
Substance
water concentration (mg/L)
concentration (mg/L)
Alachlor
Alachlor
Atrazine
Atrazine
Benzene
>98%
>98%
>97%
>97%
>99%
0.050
0.050
0.100
0.100
0.081
0.001
0.001
0.003
0.003
0.001
Benzene
Carbofuran
Carbofuran
Carbon tetrachloride
>99%
>99%
>99%
98%
0.081
0.190
0.190
0.078
0.001
0.001
0.001
0.0018
Carbon
tetrachloride
Chlorobenzene
Chlorobenzene
Chloropicrin
98%
>99.9%
>99.9%
99%
99%
98%
0.078
0.077
0.077
0.015
0.0018
0.001
0.001
0.0002
0.015
0.110
0.110
0.052
0.0002
0.0017
0.0017
0.00002
0.052
0.080
0.080
0.040
0.00002
0.001
0.001
0.001
0.040
0.088
0.088
0.083
0.001
0.0048
0.0048
0.001
0.083
0.170
0.170
0.086
0.001
0.0005
0.0005
0.001
0.086
0.080
0.080
0.079
0.001
0.001
0.001
0.001
0.079
0.170
0.170
0.053
0.001
0.0002
0.0002
0.00059
0.053
0.088
0.088
0.044
0.00059
0.001
0.001
0.00002
0.044
0.022
0.024
0.022
0.0096
0.024
0.015
0.0096
0.015
0.0072
0.0082
0.0072
0.0082
0.025
0.00002
0.0005
0.0006
0.0005
0.0002
0.0006
0.0003
0.0002
0.0003
0.0001
0.0001
0.0003
Chloropicrin
2,4-D
2,4-D
Dibromochloropropane (DBCP)
Dibromochloropropane
o-Dichlorobenzene (DBCP)
98%
>99%
>99%
>99%
o-Dichlorobenzene
p-Dichlorobenzene
p-Dichlorobenzene
1,2-Dichloroethane
>99%
>98%
>98%
95%
1,2-Dichloroethane
1,1-Dichloroethylene
1,1-Dichloroethylene
cis-1,2-Dichloroethylene
95%
>99%
>99%
>99%
cis-1,2-Dichloroethylene
trans-1,2-Dichloroethylene
trans-1,2-Dichloroethylene
1,2-Dichloropropane
>99%
>99%
>99%
>99%
1,2-Dichloropropane
cis-1,3-Dichloropropylene
cis-1,3-Dichloropropylene
Dinoseb
>99%
>99%
>99%
99%
Dinoseb
Endrin
Endrin
Ethylbenzene
99%
99%
99%
>99%
Ethylbenzene
Ethylene dibromide (EDB)
Ethylene
dibromide (EDB)
Haloacetonitriles
(HAN):
Bromochloroacetonitrile
Haloacetonitriles
(HAN):
Dibromoacetonitrile
Bromochloroacetonitrile
Dichloroacetonitrile
Dibromoacetonitrile
Trichloroacetonitrile
Dichloroacetonitrile
Trichloroacetonitrile
Haloketones (HK):
1,1-Dichloro-2-propanone
Haloketones
(HK):
1,1,1-Trichloro-2-propanone
1,1-Dichloro-2-propanone
1,1,1-Trichloro-2-propanone
Heptachlor
>99%
>99%
>99%
98%
98%
98%
98%
98%
98%
98%
98%
99%
96%
99%
96%
96%
Heptachlor
Heptachlor epoxide
Heptachlor
epoxide
Hexachlorobutadiene
96%
98%
98%
>98%
0.025
0.0107
0.0107
0.044
Hexachlorobutadiene
Hexachlorocyclopentadiene
Hexachlorocyclopentadiene
Lindane
>98%
>99%
>99%
>99%
0.044
0.060
0.060
0.055
Lindane
Methoxychlor
Methoxychlor
Pentachlorophenol
>99%
>99%
>99%
>99%
0.055
0.050
0.050
0.096
Pentachlorophenol
Simazine
Simazine
Styrene
>99%
>97%
>97%
>99%
0.096
0.120
0.120
0.150
Styrene
1,1,2,2-Tetrachloroethane
1,1,2,2-Tetrachloroethane
Tetrachloroethylene
>99%
>99%
>99%
>99%
0.150
0.081
0.081
0.081
Tetrachloroethylene
Toluene
Toluene
2,4,5-TP (silvex)
>99%
>99%
>99%
99%
0.081
0.078
0.078
0.270
2,4,5-TP
(silvex) acid
Tribromoacetic
Tribromoacetic
acid
1,2,4-trichlorobenzene
99%
>98%
>98%
>99%
>99%
0.270
0.042
0.042
0.160
1,2,4-trichlorobenzene
0.160
V
S
0.0003
0.00001
0.00001
0.0002
0.0002
0.001
0.001
0.000002
0.000002
0.00001
0.00001
0.0001
0.0001
0.001
0.001
0.004
0.004
0.0005
0.0005
0.001
0.001
0.001
0.001
0.001
0.001
0.0016
0.0016
0.001
0.001
0.0005
0.0005
†
N
co
le
of
VOC (reduction claims for organic chemicals included by chloroform surrogate testing)
Maximum permissible product
water concentration (mg/L)
Chemical Reduction %
Influent challenge
concentration (mg/L)
1,1,1 -trichloroethane
95%
0.084
0.0046
1,1,2 - trichloroethane
>99%
0.150
0.0005
Trichloroethylene
>99%
0.180
0.0010
95%
0.300
0.015
>99%
0.070
0.001
Substance
Trihalomethanes (includes):
Chloroform (surrogate chemical)
Bromoform
Bromodichloromethane
Chlorodibromomethane
Xylenes (total)
NSF/ANSI Standard Requirements
PUR Reduction data
Substance
Influent challenge
concentration (ng/L)
Overall % Reduction
% Reduction Reqirement /
Maximum permissible product
water concentration (ng/L)
Standard 401 - Emerging Compounds†
Atenolol
>95.8%
200 ± 20%
Bisphenol A
97.7%
2000 ± 20%
30
300
Carbamazepine
>98.7%
1400 ± 20%
200
DEET
98.5%
1400 ± 20%
200
Estrone
>96.5%
140 ± 20%
20
Linuron
>96.6%
140 ± 20%
20
60
Meprobamate
>94.8%
400 ± 20%
Metolachlor
>98.6%
1400 ± 20%
200
Nonyl Phenol
>96.3%
1400 ± 20%
200
700
TCEP
97.9%
5000 ± 20%
TCPP
97.1%
5000 ± 20%
700
Trimethoprim
>96.3%
140 ± 20%
20
Purchases Made in Iowa
For purchases made in Iowa: This form must be signed and dated by the buyer and seller prior to
consummation of this sale. This form should be retained on file by the seller for a minimum of two years.
BUYER:
SE L L E R :
Name
Name
Address
Address
City
City
State
Zip
Signature
State
Date
Signature
Zip
Date
†
NSF Standard 401 has been deemed as "incidental contaminants/emerging compounds." Incidental
contaminants are those compounds that have been detected in drinking water supplies at trace
levels. While occurring at only trace levels, these compounds can affect the public acceptance/perception
of drinking water quality.
®
© 2017 All rights reserved. Distr. by Kaz USA, Inc.,
a Helen of Troy Company, 400 Donald Lynch Boulevard., Marlborough, MA 01752
PUR® and MAXION® are registered trademarks of Helen of Troy Limited.
Download PDF