DFL-DAK616W
Dryer
Read this manual prior to initial operation of the product!
Dear Customer,
We hope that your product, which has been manufactured in modern facilities and passed
through a strict quality control procedure, will give you very good results.
We advise you to read through this manual carefully before using your product and keep it for
future reference.
This User Manual will
• Help you use your machine in a fast and safe way.
• Read the User Manual before installing and starting your product.
• In particular, follow the instructions related to safety.
• Keep this User Manual within easy reach for future reference.
• Please read all additional documents supplied with your product.
Remember that this User Manual is also applicable for several other models.
Explanation of symbols
Throughout this User Manual the following symbols are used:
B
Important safety information. Warning for hazardous situations with regard to life and property.
Caution; Warning for supply voltage.
Caution; Warning for fire hazard.
Caution; Warning for hot surfaces.
Read the instructions.
C
Useful information. Important information or useful hints about usage.
This appliance’s packaging material is recyclable. Help recycle it and protect the
environment by dropping it off in the municipal receptacles provided for this purpose.
Your appliance also contains a great amount of recyclable material. It is marked with
this label to indicate the used appliances that should not be mixed with other waste.
This way, the appliance recycling organised by your manufacturer will be done under
the best possible conditions, in compliance with European Directive 2002/96/EC on
Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used
appliance collection points closest to your home. We thank you doing your part to protect the
environment.
2 EN
2960310153_EN/290812.1656
A
1 Important safety information
This section includes safety information that will
help protection from risks of personal injuries
or materialistic damages. Failure to follow
these instructions shall cause any warranty and
reliability commitment to become void.
General safety
• Never place the machine on a carpet-covered
floor, otherwise, lack of airflow beneath
the machine may cause electrical parts to
overheat. This will cause problems with your
machine.
• If the power cable or mains plug is damaged,
you must call Authorised Service Agent for
repair.
• The product should not be plugged in during
installation, maintenance and repair works.
Such works should always be made by the
technical service. Manufacturer shall not
be held responsible for damages arising
from processes carried out by unauthorised
persons.
• Connect the product to a grounded outlet
protected by a fuse of suitable capacity as
stated in the technical specifications table.
• Operate your product at temperatures
between +5°C and +35°C.
• Do not use electrical devices in the product.
• Do not connect the air exit of the product
to the chimney holes which are used for the
exhaust fumes of the devices operating with
gas or other types of fuel.
• You must provide enough ventilation in
order to prevent gases exiting from devices
operating with other types of fuels including
the naked flame from accumulating in the
room due to the back fire effect.
• Always clean the lint filter before or after each
loading.
• Never operate your dryer without the lint filter
installed.
• Do not allow fibre, dust and dirt accumulation
around the exhaust exit and at adjacent
areas.
• Power cable plug must be within easy reach
after installation.
• Do not use extension cords, multi-plugs
or adaptors to connect the dryer to power
supply in order to decrease the risk of electric
shock.
• Do not make any changes on the plug
supplied with the product. If it is not
compatible with the socket, have a qualified
electrician change the socket with a suitable
one.
• Items cleaned or washed with gasoil/fuel oil,
dry-laundry solvents and other combustible
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
or explosive materials as well as the items
that are contaminated or spotted with such
materials should not be dried in the product
since they emit flammable or explosive vapor.
Do not dry items cleaned with industrial
chemicals in the dryer.
Do not dry unwashed items in the dryer.
Items soiled with cooking oils, acetone,
alcohol, fuel oil, kerosene, stain remover,
turpentine, paraffin and paraffin removers
must be washed in hot water with plenty of
detergent before being dried in the dryer.
Garments or pillows bolstered with rubber
foam (latex foam), shower bonnets, water
resistant textiles, materials with rubber
reinforcement and rubber foam pads should
not be dried in the dryer.
Do not use fabric softeners and anti-static
products unless they are recommended by
the manufacturers of the fabric softener or
the product.
This product must be grounded. Grounding
installation decreases the risk of electric
shock by opening a path with low resistance
for the electricity flow in case of a malfunction
or failure. Power cable of this product is
equipped with a conductor and a grounding
plug that allows for grounding the product.
This plug must be installed appropriately and
inserted into a socket which is grounded
in accordance with the local laws and
regulations.
Do not install the product behind a door with
a lock, sliding door or a door that has a hinge
against the hinge of the dryer.
Do not install or leave this product in
places where it will be exposed to outdoor
conditions.
Do not tamper with the controls.
Do not perform any repair or part replacing
procedures on the product even if you know
or have the ability to perform unless it is
clearly suggested in the operating instructions
or the published service manual.
Inside and exhaust duct of the product must
be cleaned by the qualified service personnel
periodically.
Wrong connection of grounding conductor
of the product can cause electric shock. If
you have any suspect about the grounding
connection, have it checked by a qualified
electrician, service representative or service
personnel.
Do not reach into the machine when the
drum is spinning.
Unplug the machine when it is not in use.
Never wash down the appliance with water!
3 EN
•
•
•
•
•
•
•
•
•
•
There is the risk of electric shock! Always
disconnect by unplugging from the mains
before cleaning.
Never touch the plug with wet hands. Never
unplug by pulling on the cable, always
pull out by grabbing the plug only. Do not
operate the machine if the power cable or
plug is damaged!
Never attempt to repair the machine
yourself, otherwise, you will be putting your
life and others’ lives in danger.
For malfunctions that cannot be solved by
following the information given in the safety
instructions:
Turn off the machine, turn off and contact an
authorised service agent.
Do not stop the dryer before the drying
cycle comes to an end unless you will
remove all laundry from the dryer fast in
order to lay them and dissipate the heat.
Remove the door of the drying compartment
before decommissioning or disposing of the
product.
The final step of the drying cycle (cooldown cycle) occurs without applying
heat to ensure that the items are left at a
temperature that will not damage them.
Fabric softeners or similar products should
be used as specified by the fabric softener
instructions.
Underwear that contains metal
reinforcements should not be placed in
a dryer. Damage to the dryer can result if
metal reinforcements come loose during
drying.
Check all garments for forgotten lighters,
coins, metal pieces, needles, etc. before
loading.
At times when your dryer is not in use or
after the laundry is taken out following the
completion of drying process, turn off by
using the On/Off button. In cases when
the On/Off button is on (while the dryer
is energized), keep the door of the dryer
closed.
product.
Children’s safety
• Electrical appliances are dangerous for
the children. Keep children away from the
machine when it is operating. Do not let
them tamper with the machine.
• Packaging materials are dangerous to
children. Keep the packaging materials out
of reach of children or dispose them by
classifying according to waste directives.
• Do not allow children sit/climb on or enter in
the product.
• Children should be supervised to ensure
that they do not play with the product.
• Close the loading door when you leave the
area where the product is located.
Intended use
• This product has been designed for
domestic use. It should not be used for
other purposes.
• Use the product only for drying laundry that
are marked accordingly.
• Dry only those articles in your product that
are stated in this manual.
• This product is not intended to be used by
persons with physical, sensory or mental
disorders or unlearned or inexperienced
people (including children) unless they
are attended by a person who will be
responsible for their safety or who will
instruct them accordingly for use of the
4 EN
2
Installation
Refer to the nearest Authorised Service Agent
for installation of your product.
CPreparation of location and electrical
installation for the product is under
customer’s responsibility.
BInstallation and electrical connections must
be carried out by a qualified personnel.
APrior to installation, visually check if the
product has any defects on it. If so, do not
have it installed. Damaged products will
cause risks for your safety.
reach 180 kg when they are full. Therefore,
the floor must be capable of carrying the
load on it!
Ventilation hose and connection (for
products equipped with an outlet vent)
Appropriate installation location
• Install the product in an environment which
has no risk of freezing and is in a stable and
level position.
• Operate your product in a well ventilated,
dust-free environment.
• Do not block the air ducts in front of and
under the product with materials such as
long pile rugs and wooden bands.
• Do not place your product on a long pile rug
or on similar surfaces.
• Do not install the product behind a door with
a lock, sliding door or a hinged door which
can strike the product.
• Once the product is installed, it should stay
at the same place where its connections
have been made. When installing the
product, make sure that the rear wall of it
does not touch anywhere (tap, socket, etc.)
and also pay attention to install the product
at a place where it will stay permanently.
BDo not place the product on top of the
power cable.
• Keep at least 1.5 cm distance to walls of
other furniture.
Under counter installation
• A special part (Part no: 295 970 0100)
replacing the top trim must be provided and
installed by the Authorised Service Agent in
order to use the machine under a counter or
in a cupboard. It should never be operated
without the top trim.
• Leave at least 3 cm of space between
the side and rear walls of the product and
the walls of the counter/cupboard when
installing your product under a counter or in
a cupboard.
Ventilation hose allows exhaust air from inside
the machine
Vented dryer has 1 air outlet.
Stainless sheet metal or aluminum pipes can
be used instead of a hose. The pipe diameter
should be minimum 10 cm.
Maximum hose and pipe lengths are given in
the table below.
Hose
Pipe
Maximum length
4m
5m
1 elbow 45°
-1.0 m
-0.3 m
1 elbow 90°
-1.8 m
-0.6 m
1 elbow 90° short
1 wall passage
-2.7 m
-2.0 m
-2.0 m
CEach elbow and other passages should be
subtracted from the maximum length stated
above.
To connect a ventilation hose;
1. Connect the air outlet hose to the hose
spacer piece by turning it counterclockwise.
2. Make the hose passages as shown below.
CExhaust of humid air from the dryer into the
room is inconvenient. It may damage the
walls and furniture in the room.
CThe ventilation hose can be routed outdoors
via a window or it can be connected to the
air outlet in the bathroom.
CAir outlet hose must be routed directly to the
outdoors. There must be a limited number of
elbows as not to hinder ventilation.
CTo prevent water accumulation in the hose,
make sure that it is not folded on the floor.
Mounting over a washing machine
• A fitting device should be used between
the two machines when installing above a
washing machine. The bracket (Part no. 296
280 0100 white/296 280 0200 grey) must be
installed by the Authorised Service Agent.
• Place the product on a firm floor. If it will be
placed on top of a washing machine, the
approximate weight of both machines may
BThe ventilation hose should not be
connected to the chimney of a stove or a
fireplace.
5 EN
BDo not operate your product at the same
operated unless it is repaired! There is the risk
of electric shock!
time with heaters such as a coal or gas stove.
First use
Airflow may cause the chimney to flare up.
• To have the product ready for operation
Adjusting feet
before calling the authorised service agent,
In order to ensure that your product operates
make sure that its location and power supply
more silently and vibration-free, it must stand
installations are appropriate. If they are
level and balanced on its feet. Front feet of
not, call a qualified electrician to have any
your product can be adjusted. Balance the
necessary arrangements carried out.
machine by adjusting the feet.
• Make sure that the power connections of
the product are in accordance with the
instructions given in relevant chapters of this
manual.
Disposing of packaging material
1. Loosen the feet by hand.
2. Adjust the feet until the product stands level
and firmly on the floor.
C Do not use any tools to loosen the
adjustable feet, otherwise, they can be
damaged.
C Never remove the adjustable feet from their
housings.
C You may supply 2 plastic pieces from an
Authorized Service with 2951620100 part
number. These parts prevent your machine
from slipping when the machine locates on
wet and slippery surfaces. You may assemble
mentioned parts to the front adjustable feet
by fitting and pressing them to snap into
ground of feet.
Electrical connection
Connect the machine to a grounded outlet
protected by a fuse of suitable capacity as
stated in the technical specifications table.
Our company shall not be liable for any
damages that will arise when the machine is
used on a circuit without grounding.
• Connection must comply with national
regulations.
• If the current value of the fuse or breaker
in the house is less than 16 Amps, have a
qualified electrician install a 16 Amp fuse.
• Power cable plug must be within easy reach
after installation.
• The voltage and allowed fuse or breaker
protection are specified in the “Technical
Specifications” section.
• The specified voltage must be equal to your
mains voltage.
• Do not make connections via extension
cables or multi-plugs.
• The main fuse and switches must have a
contact distance of minimum 3 mm.
BDamaged power cable must only be replaced
by a qualified electrician.
BIf the product is faulty, it must not be
Packaging materials are dangerous to children.
Keep packaging materials in a safe place out
of reach of children. Packaging materials of
your product are manufactured from recyclable
materials. Sort and dispose of them in
accordance with recycled waste instructions.
Do not dispose of them with normal domestic
waste.
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and chimney
connections.
3. Drain water remained in the machine
completely before transportation.
Disposing of the old machine
Dispose of your old machine in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how to
dispose of your machine.
Before disposing of your old machine, cut off the
power cable plug and make the loading door
lock unusable to avoid dangerous conditions to
children.
6 EN
3 Initial preparations for drying
Things to be done for energy saving:
• Make sure that you operate the product
•
•
•
•
•
•
•
•
•
•
•
at its full capacity but pay attention to not
exceeding it.
Spin your laundry at the highest speed
possible when washing them. Thus,
the drying time is shortened and energy
consumption is decreased.
Pay attention to dry same types of laundry
together.
Follow the instructions in the user manual for
programme selection.
Make sure that sufficient clearance is
provided at the front and rear side of the
dryer for air circulation. Do not block the grill
at the front side of the product.
Do not open the door of the machine during
drying unless necessary. If you must certainly
open the door, pay attention not to keep it
open for a long time.
Do not add new (wet) laundry during drying.
Lint and fibres released from the laundry to
the air during the drying cycle are collected in
the “Lint Filter”. Make sure that you clean the
filters before or after each drying.
In models with condenser, make sure that
you clean the condenser regularly at least
once every month or after every 30 drying
cycles.
In vented models, follow the chimney
connection rules in the user manual and pay
attention to the chimney cleaning.
Ventilate the room, where the dryer is located,
well during drying.
“For power saving in models with lamps, at
times when your dryer is not in use, keep the
door closed if the On/Off button is pressed (if
the dryer is energized).”
Laundry suitable for drying in the
machine
CAlways follow the suggestions on the laundry
labels. Dry only the laundry having a label
stating that they are suitable for drying in
a dryer and make sure that you select the
appropriate programme.
A B C D
Low
l n m
o p q
Laundry unsuitable for drying in the
machine
• Laundry items with metal attachments such
as belt buckles and metal buttons can
damage your dryer.
• Do not dry items such as woollens, silk
garments and nylon stockings, delicate
embroidered fabrics, laundry with metal
accessories and items such as sleeping bags
in the dryer.
• Laundry made of delicate and valuable fabrics
as well as lace curtains can be creased. Do
not dry them in the dryer!
• Do not dry items made of hermetic fibres
such as pillows and quilts in the dryer.
• Laundry made of foam or rubber will be
deformed.
• Do not dry laundry containing rubber in the
dryer.
• Do not dry laundry exposed to petroleum, oil,
combustible or explosive agents in the dryer
even if they are washed beforehand.
• Overly wet laundry or laundry with dripping
water must not be put into the dryer.
• Items cleaned or washed with gasoil/fuel oil,
dry-laundry solvents and other combustible
or explosive materials as well as the items
that are contaminated or spotted with such
materials should not be dried in the product
since they emit flammable or explosive vapor.
• Do not dry items cleaned with industrial
chemicals in the dryer.
• Do not dry your unwashed laundry in the
dryer.
• Items soiled with cooking oils, acetone,
alcohol, fuel oil, kerosene, stain remover,
turpentine, paraffin and paraffin removers
must be washed in hot water with plenty of
detergent before being dried in the dryer.
• Garments or pillows bolstered with rubber
foam (latex foam), shower bonnets, water
resistant textiles, materials with rubber
7 EN
reinforcement and rubber foam pads
should not be dried in the dryer.
• Do not use fabric softeners and anti-static
products unless they are recommended by
the manufacturers of the fabric softener or
the product.
• Do not dry the underwear reinforced with
metal parts in the dryer. If these metal
reinforcements loosen and break during
drying, they will damage your dryer.
dryer 1-2 times during drying process to
separate bunched-up laundry.
Following weights are given as examples.
Preparing laundry for drying
• Check all laundry items before loading
•
•
•
•
them into the product to make sure that
there are no lighters, coins, metal items,
needles and etc. in their pockets or on any
part of them.
Fabric softeners and similar products must
be used in accordance with the instructions
of the manufacturer of the relevant
products.
All laundry must be spun at the highest
spin speed that your washing machine
allows for the laundry type.
Laundry may be tangled after washing.
Separate your laundry before placing them
into your dryer.
Sort your laundry according to their types
and thicknesses. Dry the same type of
laundry together. E.g.: fine kitchen towels
and table cloths dry faster than the thick
bath towels.
Correct load capacity
Home articles
Approximate
weights (g)
Cotton quit covers (double)
Cotton quit covers (single)
Bed sheets (double)
Bed sheets (single)
Large tablecloths
Small tablecloths
Tea napkins
Bath towels
Hand towels
1500
1000
500
350
700
250
100
700
350
Approximate
weights (g)
150
300
200
500
350
700
100
125
Garments
Blouses
Cotton shirts
Shirts
Cotton dresses
Dresses
Jeans
Handkerchiefs (10 pieces)
T-Shirts
Loading
• Open the loading door.
• Place laundry items loosely into the dryer.
• Push the loading door to close. Ensure that
no items are caught in the door.
AConsider the information in the
“Programme Selection Table”. Always start
the programme in accordance with the
maximum load capacity.
CAdding laundry to the machine more
than the level shown in the figure is not
recommended. Drying performance will
degrade when the machine is overloaded.
Furthermore, your dryer and your laundry
can be damaged.
CPlace your laundry into the drum loosely so
that they will not get tangled.
CLarge pieces (E.g.: bed sheets, quilt covers,
large tablecloths) may bunch-up. Stop the
8 EN
4 Selecting a Program and Operating Your Machine
Control panel
1
2
4
3
5
6
1. Filter cleaning warning light
Warning light turns on when the filter is full.
2. Program follow-up indicator
Used to follow-up the progress of the
current programme.
3. Low temperature
Used to dry in low temperatures.
Cottons
Synthetics Delicates
Timer
program
Ventilation
4. On/Off button
Used to turn on and off the machine.
5. Programme selection knob
Used to select a programme.
6. Start/Pause/Cancel button
Used to start, pause or cancel the
programme.
End/
Anticreasing
Ready to
iron
Extra Ready Ready to
to Wear
Wear
Drying
3’’
Low
Low
Cancel
temparature temparature Audio
select
Warning
Spin
On/Off
Start/Pause/
Cancel
9 EN
Reset
3 sn.
Filter
cleaning
Tank
full
Child-proof
lock
Timer
follow-up
indicator
Preparing the machine
1. Plug in your machine.
2. Place the laundry in the machine.
3. Press the “On/Off” button.
C Pressing the “On/Off” button does not
necessarily mean that the programme has
started. Press “Start/Pause/Cancel” button of
the machine to start the programme.
Timer program selection
Decide the appropriate time from the table
below which includes drying temperature in
degrees. Select the desired time with the timer
program selection button.
Extra dry
Ready to Wear
Ready to Iron
Dry at high temperature
only for cotton laundry.
Thick and multi layered
laundry (E.g.: towels,
linens, jeans) are dried in
a way that they do not
require ironing before
placing in the wardrobe.
Normal laundry (E.g.:
tablecloths, underwear)
are dried in a way that
they do not require
ironing before placing in
the drawers.
Normal laundry (E.g.,
Shirts, dresses) are dried
ready to be ironed.
C For further program details, see, “Program/
Time Selection Table”
Main programs
•Anti-creasing
A 2-hour anti creasing program to prevent
laundry from creasing will be activated if you
do not take the laundry out after the program
has come to an end. This program rotates
the laundry in 60-second intervals to prevent
creasing.
•Ventilation
Only ventilation is performed for 10 minutes
without blowing hot air. You can air your clothes
that have been kept at closed environments for
a long time thanks to this program to deodorize
unpleasant odors.
•Timer programs
You can select one of the 10 min...60 min...80
min... timer programs to achieve the final
drying level. Dry the cotton laundry at high
temperatures and synthetic and easy-care
laundry at low temperatures depending on the
type of the laundry.
C You must press the “Low temperature”
button for synthetics
10 EN
Program selection and consumption table
EN
2
Program table
Approximate
Programs
Capacity
Spin speed in washing
amount of
Drying time
(kg)
machine (rpm)
remaining
(minutes)
humidity
Cottons / Coloreds
6
A
Ready to Wear
3
6
A
Ready to Iron
3
1200-1000
% 60
110
900-800
% 70
130
1200-1000
% 60
80-60
900-800
% 70
110-80
1200-1000
% 60
110-80
900-800
% 70
110
1200-1000
% 60
60-40
900-800
% 70
80-60
800
% 40
60-40
600
% 50
80-60
800
% 40
40-20
600
% 50
60-40
800
% 40
40
Synthetics
3
B
Ready to Wear
1.5
Delicates
B
Ready to Wear
1.5
Energy consumption values
Approximate
Programs
Capacity
Spin speed in washing
amount of
(kg)
machine (rpm)
remaining
humidity
Energy
consumption
value kWh
Cottons linen Ready to wear*
6
1000
% 60
3.39
Cottons Ready to iron
6
1000
% 60
2.90
Synthetics Ready to wear
3
800
% 40
1.27
* : Energy Label standard program (EN 61121:2005)
All values given in the table have been fixed according to EN 61121:2005 Standard. These
values may deviate from the table according to the laundry type, laundry spin speed,
environmental conditions and voltage fluctuations.
11 EN
Auxiliary function
Low temperature
This function allows for drying at lower
temperatures and therefore saves energy.
Warning LED will light up when you select the
function.
C You must use this function when you dry
your synthetic or delicate laundry.
Warning indicators
C
Warning indicators may differ according to
the model of your machine.
Filter cleaning
A warning LED will light up to remind filter
cleaning after the program finishes.
C If the filter cleaning warning LED lights
up continuously, please refer to, “Solution
suggestions for problems”.
program.
Any laundry added after the drying process
was started may cause the already dried
clothes in the machine intermingle with wet
clothes and the result will be wet laundry after
the drying process is over.
C Laundry may be added or taken out as much
as desired during a drying process, but as
this process will interrupt drying continuously,
it will extend the program duration and
increase energy consumption. Therefore, it
is recommended to add laundry before the
drying program is started.
C
Child-proof lock
There is a childproof lock to prevent any
program interruption due to the pressing of keys
while the program is on. The loading door and
all keys except the “On/Off” key on the panel are
Starting the Program
deactivated when the child-proof lock is active.
1. Press “Start/Pause/Cancel” button to start
In order to activate the childproof lock, press
the program.
on the “Start/Pause/Cancel” and “Low
2. “Start/Pause/Cancel” button will light up to
temperature” buttons simultaneously for 3
indicate that the program has started.
seconds.
Timer follow-up indicator
To start a new program after the program is
One of the lamps is on as far as program runs
over or to interrupt the program, the childproof
and shows the approximate remaining time.
should be deactivated. To deactivate the
C LEDs on the timer follow-up indicator will also lock
childproof lock, press the same buttons for 3
flash when the child-proof lock is activated.
sec.
A If more than one LED light up or flash
concurrently, it means there is malfunctioning
or a failure (please see, Solution suggestions
for problems).
Changing the program after the program
has started
You can use this feature to dry your laundry in a
different program after your machine has started
to run.
For example;
Press and hold the “Start/Pause/Cancel” button C One of the LEDs on the program follow-up
for about 3 seconds to select “80” minutes
indicator starts flashing when the child-proof
program instead of “60” minutes program.
lock is activated.
Select the “80” minutes program by rotating the CChild-proof lock is deactivated when the
program knob.
machine is restarted by pressing the On/Off
Press “Start/Pause/Cancel” button to start the
button.
program.
Ending the program through canceling
C The program which is selected first will go on The program which is selected first will keep
even if the program selection button is moved on going even if the position of the program
and another program mode is selected while selection button is changed. A new program
the machine is operating. You must cancel
can be selected and started after “Program
the ongoing program in order to change the cancel” is activated in order to change the drying
drying program. (See, Ending the program
program.
through canceling)
To cancel any selected program;
Adding/removing laundry in standby mode • Press “Start/Pause/Cancel” button for about
In order to add or take out laundry after the
a duration of 3 seconds. The “Filter cleaning”
start-up of the program;
and “Water tank” warning LEDs as well as the
1. Press the “Start/Pause/Cancel” button to
“0” warning LED on the program follow-up
switch the machine to “Pause” mode. Drying
indicator will light up at the end of this period
process will stop.
for reminding purposes.
2. Open the door at Pause position and close it A As the inside of the machine will be
again after adding or taking out laundry.
excessively hot when you cancel the program
3. Press “Start/Pause/Cancel” button to start the
12 EN
while the machine is running, activate the
ventilation program to cool it down.
A If the machine is stopped during any drying
program, and if the position of the program
selection knob is changed, an audio signal
will be heard (if the “Cancel audio warning”
function is not selected).
The machine will not start even if the “Start/
Pause/Cancel” button is pressed, unless the
program selection knob is returned to the
initial program. The paused program must be
cancelled in order to change the drying program.
End of program
The “Filter cleaning” and “Water tank” warning
LEDs as well as the “0” warning LED on the
program follow-up indicator will light up at the
end of the program. The door can be opened
and the machine becomes ready for a second
cycle.
Press the “On/Off” button to shut down the
machine.
C A 2-hour anti creasing program to prevent
laundry from creasing will be activated if you
do not take the laundry out after the program
has come to an end.
C Clean the filter after each drying (please see,
Filter cleaning).
C Drain the water tank after each drying (please
see, Water tank)
Technical Specification
EN
2
Height (adjustable)
85.0 cm
Width
59.5 cm
Depth
54 cm
Capacity (max.)
6 kg
Weight (net)
31 kg
Voltage
Rated power input
See type label
Model code
Type label is located behind the loading door.
13 EN
5 Maintenance and cleaning
Lint filter
Lint and fibres released from the laundry to the
air during the drying cycle are collected in the
“Lint Filter”.
CSuch fibre and lint are generally formed during
wearing and washing.
CAlways clean the filter after each drying
process.
CYou can clean the filter and filter area by
vacuum cleaner.
Figure 1
Figure 2
To clean the filter:
1.Take out the cover.
2.a) If the product’s lint filter can be opened as
shown in Figure 1, remove the filter by pulling
it up and open the filter.
2.b) If the product’s lint filter is as shown in
Figure 2, remove the filter by pulling it up.
3. Clean lint, fibre, and cotton raveling on the
filter and in the filter housing by hand or with
a soft piece of cloth.
4. Close the filter and place it back into its seat.
CClogging may arise on the filter surface after
using your machine for some time; if this
occurs, wash the filter with water and dry it
before using again.
14 EN
6 Solution suggestions for problems
Problem
Cause
Explanation / Suggestion
Drying process
takes too much
time.
Cover filter and filter drawer
might have not been cleaned.
* Meshes of the filter may be clogged.
Wash with water.
Laundry come
out wet at the
end of drying.
* Cover filter and filter drawer
might have not been cleaned.
* Excessive laundry might have
been loaded in.
* It might have not been plugged
in.
* The loading door may be ajar.
* Programme might have not
been set or the «Start/Pause/
Cancel» button might have not
been pressed.
* «Childproof lock» might have
been activated.
* The condenser cover on the
models with a condenser might
not be closed securely.
* Meshes of the filter may be clogged.
Wash with water.
* Do not overload the machine.
Machine does
not switch on or
the programme
does not start.
Machine is not
activated when
set.
* Make sure that the machine is
plugged in.
* Make sure that the loading door is
properly closed.
* Make sure that the programme
has been set and it is not in “Pause”
mode.
* Deactivate the childproof lock.
* Make sure that the condenser cover
and the red lock is closed securely.
Programme has
been interrupted * The loading door may be ajar.
without any
* Electricity may be cut off.
cause.
Laundry has
shrunk, become
felted or
deteriorated.
* Make sure that the loading door is
properly closed.
* Press «Start/Pause/Cancel» button
to start the programme.
* Dry only the laundry which is suitable
for drying in your machine after
* A programme suitable for the
the labels on your clothes.
laundry type might have not been checking
* Select a programme with suitable
used.
low temperature for the laundry type to
dry your clothes.
Drum lightning
does not come
on.
(for models
equipped with a
lamp)
* The machine might have not
been started by using the On/Off
button.
* Bulb may have blown.
* Make sure that the machine is On.
* Call the authorized service to replace
the bulb.
“Final / Anticreasing” LED
flashes.
* The 2-hour anti creasing
programme to prevent laundry
from creasing might have been
activated.
* Turn off the machine and take out
the laundry.
“Final / Anticreasing” LED
is on.
* Program has come to an end.
* Turn off the machine and take out
the laundry.
The “Drying”
LED flashes.
* A heat sensor failure has
occurred. Machine ends the
programme without heating.
* Turn off the machine and take out the
laundry. Call your authorized service.
“Filter cleaning”
LED flashes.
* Filter might have not been
cleaned.
* Clean the cover filter.
Also for products equipped with a condenser
“Water tank”
* Water may be full.
warning LED is
* Anti-creasing programme might
on.
be running.
15 EN
* Drain the water in the water tank.
“Condenser
cleaning” LED
is on.
* Filter drawer/Condenser might
have not been cleaned.
* Clean the filters in the condenser/
filter drawer under the kick plate.
A Call an authorized service agent if the problem persists.
16 EN