rack cleaner elbag 3000 - Wassitech Ing. Erich Wimberger

RACK CLEANER
ELBAG 3000
Fully automatic cleaning
for ensured convenience and high yield
The unique system, the enormous lifting power, and the omission of installations in the water provide this rack cleaner maximum operating security and
durability. The low energy consumption and maintenance costs and the reliable and simple functionality produce optimal conditions for the turbine.
RACK CLEANER
ELBAG 3000
Fully automatic cleaning
for ensured convenience and high yield
Features
Max. operating width: 3,000 mm
Max. operating height: 3,000 mm
Expansion possible as required
Lifting power: 500 kg
Weight: 300 kg
The advantage
Drive: electrical motor
A fully automatic rack cleaner extends the operating times of your
with gears, brake and
system and simultaneously produces optimal conditions for the tur-
toothed rack
bine. Uniform cleaning decreases turbine fouling and consequently
maintenance costs.
Innovative system with long service life
The unique system, the enormous lifting power, and the omission of
installations in the water provide the rack cleaner maximum operating security and durability. The ELBAG 3000 rack cleaner has been
developed for cleaning rack segments featuring a maximum size of
three-by-three metres, but it may also be expanded with an additional
hydraulic pressing mechanism as required. The low energy consumption and maintenance costs and the reliable and simple functionality
produce optimal conditions for the turbine. All components are mounted
outside of the water, so there is no wear due to sand, rubble, or corrosion. The low weight of the components and the small size also enable
assembly in locations that are difficult to access.
Ecological advantage
The oil-free electrical drive is especially appreciated, and not only in
environmentally sensitive areas.
Accessories
The extensive accessories (complete hot galvanising, level-dependent
activation controls, serrated cleaning rake, ice operation activation,
etc.) enable us to tailor the cleaner to meet your unique requirements.
WASSITECH Ing. Erich Wimberger
Sonnleiten 2, Office: Im Tal 3 ∙ 4150 Rohrbach-Berg ∙ Austria
T: +43 7289 40304 ∙ F: +43 7289 40304-33 ∙ M: +43 676 7989622
erich.wimberger@wassi.at ∙ www.wassi.at
Drive power: 0.25 - 0.55 kW
Duration per cleaning cycle: 30 sec
Activation duration: 100%
Hot galvanised for optimal
corrosion protection