EDFB-12-C 14-5F - A Messe Supply

No Lead Drinking Fountain
Fully Recessed Wall Mount
Model EDFB12C
SPECIFICATIONS
GENERAL
#18 gauge, type 304, nickel bearing stainless steel wall drinking fountain designed to meet all sanitary codes. Unit has
embossed bubbler pad and built in stream splitter. Finish is
hand blended to a lustrous satin finish.
EDFB12C: Furnished complete with Flexi-Guard ® safety
bubbler, fully assembled front push bar, flow regulator provides
constant stream from 20 to 105 psi water pressure, and domed
strainer. No trap furnished.
THIS DRINKING FOUNTAIN COMPLIES WITH THE LEADFREE DEFINITION IN THE SAFE DRINKING WATER ACT OF
1986 AND LEAD CONTAMINATION CONTROL ACT OF 1988.
Elkay Drinking Fountains are manufactured with a waterway
system utilizing copper components and completely lead-free
material. These waterways have no lead because all leaded
materials, such as leaded brass, have been removed.
THIS DRINKING FOUNTAIN COMPLIES WITH THE
REQUIREMENTS OF A.D.A. (AMERICANS WITH DISABILITIES ACT) WHEN RIM OF FOUNTAIN IS MOUNTED 34"
FROM THE FLOOR OR LESS AND PROPER CLEAR FLOOR
SPACE IS PROVIDED.
CONSTRUCTION
Exclusive Flexi-Guard® Safety Bubbler: Innovative design utilizes a pliable polyester elastomer to prevent accidental mouth
injuries. Flexes on impact, then returns to original position.
Strong. Abrasion-resistant. Anti-sweat. Keyed in location to
prevent rotation.
ALSO AVAILABLE
MODEL EDFB12FC: Same as above, includes LK109A glass
filler.
5-3/4"
(146mm)
19"
(483mm)
17"
(432mm)
WALL OPENING
26-5/8"
(676mm)
ACCESSORIES
MB24: Mounting Box is available as an optional accessory.
STANDARDS
This fountain is certified by WQA to lead-free compliance
including NSF/ANSI 61-ANNEX G, AB 1953.
1/2"
(13mm)
11/16"
(17mm)
10-11/16"
(272mm)
WALL
OPENING
29-1/2"
(749mm)
WALL OPENING
32-1/2"
(826mm)
CENTERLINE
OF DRAIN
WATER INLET LOCATION, 3/8" O.D.
UNPLATED COPPER TUBE CONNECT
5-7/8"
(149mm) 1/8"
(3mm)
MOUNTING HOLES
FOR 1/4" DIA.
(6mm) SCREWS 8-1/2"
(216mm)
7/16"
26"
(661mm)* (11mm)
4-1/4"
(108mm)
5-3/4"
(146mm)
Model EDFB12C
8-1/2"
(216mm)
17-7/8"
(454mm)
1"
(25mm)
3-3/16"
(81mm)
FOUNTAIN
WASTE
OUTLET
LOCATION.
1-1/4" O.D.
DRAIN
(TRAP NOT
FURNISHED)
40"
(1016mm)
RIM HEIGHT
31"
(788mm)*
27-1/2"
34"
(864mm)*
7/16" (699mm)*
RIM HEIGHT
(11mm)
ADA
8-1/2"
REQUIREMENT
(216mm)
7-11/16"
(195mm)
30-1/2"
(775mm)*
FINISHED FLOOR LINE
*MEASUREMENTS FOR ADA REQUIREMENTS
5-3/4"
(146mm)
19"
(483mm)
17"
(432mm)
WALL OPENING
26-5/8"
(676mm)
1/2"
(13mm)
11/16"
(17mm)
10-11/16"
(272mm)
WALL
OPENING
CENTERLINE
OF DRAIN
WATER INLET LOCATION, 3/8" O.D.
UNPLATED COPPER TUBE CONNECT
(149mm) 1/8"
(3mm)
26" 7/16"
(661mm)* (11mm)
4-1/4"
(108mm)
5-3/4"
(146mm)
29-1/2"
(749mm)
WALL OPENING
32-1/2"
(826mm)5-7/8"
MOUNTING HOLES
FOR 1/4" DIA.
(6mm) SCREWS 8-1/2"
(216mm)
8-1/2"
(216mm)
17-7/8"
(454mm)
1"
(25mm)
3-3/16"
(81mm)
40"
(1016mm)
RIM HEIGHT
31"
(788mm)*
27-1/2"
34"
(864mm)*
7/16" (699mm)*
RIM HEIGHT
(11mm)
ADA
8-1/2"
REQUIREMENT
(216mm)
7-11/16"
(195mm)
FOUNTAIN
WASTE
OUTLET
LOCATION.
1-1/4" O.D.
DRAIN
(TRAP NOT
FURNISHED)
30-1/2"
(775mm)*
FINISHED FLOOR LINE
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
Elkay
elkayusa.com
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 4/11)
14-5G
No Lead Drinking Fountain
Fully Recessed Wall Mount
Model EDFB12C
WALL HANGER
12" X 1"
(305mm X 25mm)
(FURNISHED LOOSE)
11/16"
(17mm)
ROUGH-IN DIMENSIONS
5-3/4"
(146mm)
5-3/4"
(146mm)
DOTTED LINE
INDICATES OUTLINE
OF FOUNTAIN
19"
(483mm)
17" (432mm)
WALL OPENING
1"
(25mm)
1"
(25mm)
1-3/4"
(44mm)
32-1/2"
(826mm)
29-1/2" (749mm)
WALL OPENING
RIM OF
FOUNTAIN
6-3/4"
(171mm)
1"
(25mm)
1/8"
(3mm)
4-11/16"
(119mm)
4-1/4"
(119mm) 4-1/4"
(119mm)
4-11/16"
(119mm)
1-1/4"
(32mm)
7 MOUNTING HOLES
FOR 1/4" (6mm) DIA. SCREWS
40" (1016mm)
RECOMMENDED HEIGHT
FROM FLOOR TO RIM
OF FOUNTAIN
FOUNTAIN
LOCATION
WALL CUTOUT
WITH BOLT LOCATIONS
34" (864mm)
FLOOR TO RIM IF
REQUIRED TO COMPLY
WITH A.D.A.
(NOT FURNISHED)
SERVICE STOP
DIRECTION
NOTE: WATERFLOW
TO COOLER
WATER INLET
1/4" O.D. TUBE
COLD WATER SUPPLY
3/8" O.D. TUBE CONNECT
INLET
BUILDING WATER
RELEASE TUBE
PULLING IT OUT HELPS TO
PUSHING TUBE IN BEFORE
A
B
C
TUBE TO ATTACH
IN POSITION
TO RELEASE TUBE
SIMPLY PUSH IN TUBE IS SECURED PUSH IN COLLET
OPERATION OF QUICK CONNECT FITTINGS
INSTALLATION INSTRUCTIONS
1. Remove lower panel from drinking fountain by removing the two screws at
the lower corners. Rotate the bottom of the panel out and pull gently downward to remove.
2. Water inlet tube to be 3/8" O.D. Waste tailpiece for slip trap is 1-1/4" O.D.
Contractor to supply waste trap in accordance with local codes.
3. Connecting lines to be copper and thoroughly flushed to remove all foreign
matter before connection to fountain assembly. The furnished strainer
should be installed in the supply line.
4. Connect the fountain to supply line with a shut off valve and install a 3/8"
(10mm) water line between the valve and fountain. Connect the 3/8 line to
the inlet of the strainer by loosening the retaining nut and inserting the tubing past the o-rings (approximately 3/4"). Finger tighten nut to lock tubing
in place.
5. Stream height is factory set at 35 psi. If supply pressure varies greatly from
this, turn adjustment screw on regulator. Clockwise adjustment will raise
the stream and counter-clockwise adjustment will lower the stream. For
best adjustments, stream should hit the basin 6-1/2" (165mm) from the
bubbler.
OPERATION OF QUICK CONNECT FITTINGS
SIMPLY PUSH IN TUBE IS SECURED PUSH IN COLLET
TUBE TO ATTACH
IN POSITION
TO RELEASE TUBE
A
C
B
PUSHING TUBE IN BEFORE
PULLING IT OUT HELPS TO
RELEASE TUBE
FIG. 1
1/4" O.D. TUBE
WATER INLET
TO COOLER
ACTUATION OF QUICK CONNECT WATER FITTINGS
Fountain is provided with lead free connectors which utilize an o-ring water
seal. To remove tubing from the fitting, relieve water pressure, push in on gray
collar while pulling on the tubing. To insert tubing, push tube straight into the
fitting until it reaches a positive stop (approximately 3/4" [19mm]). See Fig. 1.
3/8" O.D. TUBE CONNECT
BUILDING WATER
COLD WATER SUPPLY
INLET
NOTE: WATERFLOW
DIRECTION
SERVICE STOP
(NOT FURNISHED)
FIG. 2
Elkay
14-5G
(Rev. 4/11)
2222 Camden Court
Oak Brook, IL 60523
elkayusa.com
Printed in U.S.A.
©2011 Elkay