HS-200 Stacker CLNX Series Accessory The HS-200 Stacker For use with the SATO CLNX™ Series Printer The SATO HS-200 Stacker is the most versatile stacker option in the industry. Our label and tag post print solution is specifically designed for SATO’s CL4NX™ and CL6NX™ Series with installed cutter option. Unlike other solutions that simply collect cut media, which can cause stacking out of sequence or jams, the HS-200 performs as a robust and very reliable stacking solution. The space saving design also includes a stand and join plate to align the printer and stacker along with two adjustable and removable hoppers. The HS-200 Stacker option works with a myriad of media types, whether pressure sensitive labels or tag/card stocks, including those with embedded RFID inlays. The versatility of the HS-200 also accommodates media widths from one to seven inches and lengths up to six inches. The uniformed stacks makes batch printing easier to transport, sort and manage, thus reducing the time and labor required compared to other options. FEATURES AND BENEFITS • • • • • Powered stacker Removable hopper design Fully adjustable for various media sizes Stacking solution for label, tag or RFID media Increase productivity and provides significant ROI Hoppers for wide and narrow media www.satoamerica.com/HS200 GENERAL SPECIFICATIONS / HS-200 Stacker SPECIFICATIONS WEIGHT Usage Specifications For use with SATO CLNX Series printers with installed cutter option. Requires printer stand (included) to join/placement of printer and stacker. Stacker Weight 28.6 lbs. (13 Kg) Supported Media Face-In / Face-Out roll with 3” (76.2 mm) ID Core [4” (101.6 mm) ID Core recommended] or fan-fold media (highly recommended) Thermal or RFID media. Media Width 1” Minimum / 7” Maximum (25.4 mm / 178 mm) Join Plate ~1 lbs. (~0.45 Kg) Stand (Without Printer) ~3 lbs. (~1.36 Kg) OPERATION Operation of Stacker Belt driven take-up with adjustable pressure weights for media sizes Media Length 1.6” Minimum / 6.1” Maximum (40 mm / 155 mm) Alarms Cover Open / Stacker Full / Media Jam Collection Method Adjustable hopper with lowering support tray Sensors Media Present / Cover Open / Stack Proximity / Stacker Full Stacker Full Capacity ~1500 tags/labels Electrical Power Supply: 115-230V Output 13.5V=1.9 A, Fuse: 1.25 A Max Throughput 9000 tags/labels per hour ENVIRONMENTAL DIMENSIONS Temperature 23° F to 95° F (-5° C to 35° C) Relative Humidity: 15 to 85% Noise Level: ~54 dB(A) Stacker / ~70 dB(A) Complete System Dimensions (Stacker Only) 13.3” L x 14.5” W x 15.6” H (338 mm x 368 mm x 396 mm) With Stand (And Printer) 33” L x 16” W x 23” H (838 mm x 406 mm x 584 mm) CERTIFICATION CE, FCC With Hopper Installed 33” L x 16” W x 26” H (838 mm x 406 mm x 660 mm) Specifications subject to change without notice Selecting a Hopper for Stacking Media The HS-200 Stacker features two size hoppers for post print stacking. Below (*) offers insight to those minimum and maximum specifications. (Note: It is necessary to leave a gap between the actual media size and the walls of the hopper to stack properly) HOPPER SPEC* MEDIA SPEC Width Length Minimum 1.0" (25.4 mm) 1.6" (40 mm) Maximum 7.0" (178 mm) 6.1" (155 mm) Small Large Width Length Minimum 1.0" (25.4 mm) 1.6" (40 mm) Maximum 3.3" (84 mm) 3.3" (84 mm) Minimum 2.0" (50.8 mm) 2.0" (50.8 mm) Maximum 7.0" (178 mm) 6.1" (155 mm) Media Stacking Capacity The HS-200 Stacker uniformly and sequentially stacks cut media supported by the CLNX™ Series printer. The table below represents the approximate number of labels/tags the removable hopper can accommodate based on media thickness. Thickness (mils) 5 5.5 6 6.5 7 8 9 10 Number in Stack 1503 1367 1253 1156 1074 940 835 752 Note: Factors such as substrate type, media wind and/or inner core diameter contribute to media curl and may affect the total number of stacked media. CORPORATE 10350-A Nations Ford Rd Charlotte, NC 28273 Phone: (704) 644-1650 Fax: (704) 644-1662 email@example.com LABEL MANUFACTURING, SERVICE & SALES UNITED STATES CANADA MEXICO CENTRAL AMERICA CARIBBEAN ©2017 SATO America. All rights Reserved. Rev B • Any unauthorized reproduction of this content, in part or whole, is strictly prohibited • SATO is a registered trademark of SATO Corporation and its subsidiaries in Japan, the U.S. and other countries. All other trademarks are the property of their respective owners.