Operating and Installation Instructions

B
洗衣干衣机使用及安装说明书
Operating and Installation Instructions
5120 004791 (PD 84 09 25)
WVT 52458
在使用本产品前,请您仔细阅读本使用说明书。
由于不遵守该使用及安装说明书中规定的注意事项,所引起的任何故障和损失均不在
厂家的保修范围内,厂家亦不承担任何相关责任。请妥善保管好所有文件。如有疑问,
请与当地的客户服务中心或经销商联系。
如果您需要英文说明书,请发送电子邮件,或拨打服务热线向客户服务部门免费索取。
谢谢!
Please read this specification carefully before you use the product.
Any failure and losses caused by ignoring the above mentioned items and cautions
mentioned in the operation and installation instruction are not covered by our warranty
and any liability. Please keep all documents in a safety place for future reference.
If you have any doubt, please contact our local service center of dealer.
If you need an English user manual, please send the E-mail to service department, or
you can call up service hot line for free supply. Thanks!
生产厂家: 中德合资 博西威家用电器有限公司
厂 址: 中国江苏省无锡市高新技术开发区旺庄路66号
邮 编: 214028
1
Table of Contents
Operating Instructions
Disposal Information. . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Protection/Conservation Issues. . . . . 2
Safety Precautions and Warnings. . . . . . . . . . . . . . . 3
Product Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Your New Washing Machine. . . . . . . . . . . . . . . . . . . . 5
First Wash Cycle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Preparing, Sorting and Loading the Laundry. . . . . . . 12
Laundry Detergents and Additives. . . . . . . . . . . . . . . 17
Washing/drying with standard settings. . . . . . . . . . . . 18
Washing/drying with individual settings. . . . . . . . . . . .22
Programme table. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
When the Programmme has Ended. . . . . . . . . . . . . . 28
Cleaning and Care. . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Troubleshooting Minor Faults. . . . . . . . . . . . . . . . . . . 33
Installation Instructions
Installation, Connection and Transport. . . . . . . . . . . . 36
Technical Data &
Package Sheet
Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Customer Service
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Package Sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Service Assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Warranty Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
B
Operating Instructions
Disposal Information
2
,
The new machine s packaging
Dispose of packing materials in a responsible manner. Keep
packing materials out of the reach of children. Packing mater
-ials are not toys. Reprocessing and re-using materials saves
raw materials and reduces waste. All packing materials used
are environment friendly and re-usable. Cardboard boxes co
-nsist of 80% to 100% recycled paper. Plastic wrappings are
made from polythene(PE), the tapes are made from polypropy
-lene(PP) and the CC-free packing is made from foamed poly
-styrene (PS). These materials are pure hydrocarbon compounds and can be recycled.
Your old machine
Render the washer-dryer inoperable when it can no longer be used Remove the plug from the socket and cut off
the power cable. Destroy the catch on the porthole door.
Prevent children at play from being locked in and risking
death by suffocation. The old machine contains valuable
materials which should be recycled. Please make your
contribution to the environment by assisting with proper
disposal or recycling.
Through the economical use of energy, water and detergent,
your appliance is kind to the environments as well as your
household budget.
You can increase the economy and environmental
friendliness of your washer-dryer by washing maximum
loads:
refer to page 26 program table
How to save energy:
For small amounts of laundry, the automatic control system
reduces the consumption of both water and
,, energy. Where
possible, use the 60℃ Cottons/coloureds
program with
,,
additional function ,,Intensive Stains instead of the 90℃ Cottons/coloureds programme. The extended washing
duration means that a cleaning result comparable to that of the
90℃ programme is achieved using considerably less energy.
,,
,,
,,
Environmental
Protection
How to save water, energy and detergent:
Avoid using the Pre-wash function when washing lightly
normally soiled laundry.
How to save energy and time:
For lightly soiled laundry, select the short program approprivate
to the type of textile.
How to save detergent:
Add detergent according to the degree of soiling, amount of
laundry and water hardness, and observe the detergent
manufacture s instructions.
How to save energy
If washing is then to be dried in the appliance, select the
higher spin speed - because the more water that is spun
out of the appliance, the less time and energy is required
to dry it.
B
Operating Instructions
Precautions and
Warnings
3
Before using for the first time:
Please read the enclosed documents carefully before using
the Washer-dryer for the first time. They contain important
information on the installation, use and safety of the
machine.
The manufacturer does not accept liability if these instructions are not followed.
Please contact an authorized technician to install the mach
-ine and instruct the using method.
Please keep all documents in a safe place for future reference.
Install the Washer-dryer in accordance with the instructions
(page 36-42). Remove the transit bolts and keep them in a
safe place.
The washing machine must be installed and operated in a
room with the drain.
When heating, the maximum current of the washing mach
-ine is 10A,so please make sure that the power supply sys
-tem(voltage; current and the cable) is applicable to the load of the applied appliance.
In order to ensure your safety, you must plug the cable into
a socket which connected to earth. And please check your
socket to make sure that it is connected with reliable earth
correctly.
If the Washer-dryer is visibly damaged, do not connect it
up. If you are in doubt, contact your customer service representative or dealer.
This Washer-dryer use thread connection water inlet hose,
connect it to the water tap together with the machine according to the require of page 35. (carry out by an authorized
technician)
When washing and drying:
Operate the Washer-dryer with cold tap water only.
Your Washer-dryer is designed for domestic use only, i.e.
For washing machine-washable textiles in a detergent
solution.
Due to the use of the condensation principle in drying,
please keep the connected water tap open during the
drying process.
Never use flammable; explosible and/or poisonous solvents
such as gasoline; alcohol etc. As the washing lotion. Please
only use the lotions suitable for using in washing machine
available in the market.
Never wash the carpet in the washing machine.
Kepp children and pets away from the washing machine.
B
Operating Instructions
4
Exercise caution when pumping out hot detergent solution.
Never open the door when drying.
When the programme has ended:
When the program has ended:
The End is indicated(If you select no final spin function,see
page 28).The buzzer of machine sounds(the duration is 10
minutes) to remind the user that the program has ended.
Open the loading door after cutting the power of machine.
After the programme has ended, please cut the supply of
power and water immediately.
Taking care of your machine:
Do not climb onto the Washer-dryer
Do not lean against the door.
Do not expose the Washer-dryer in the place with causticity
or explosibility gas.(e.g. dust, steam and gas, etc.)
Do not install the Washer dryer in a bathroom or a room
very wet.
Please close the door gently. If the door could not be closed
successfully, please check if the laundries overload or not
balanced.
This series Washer-dryer carry out national standards as
following
GB/T4288-2003
Household electric washing machine
GB4706.1-1998
Safety of household and similar electrical appliances.
Part 1: General requirements
GB4706.24-2000
Safety of household and similar electrical appliances
Particular requirements for washing machines
GB4706.26-2000
Safety of household and similar electrical appliances
Particular requirements for spin extractors
GB4706.20-2000
Safety of household and similar electrical appliances Particular
requirements for tumbler dryers
B
Operating Instructions
5
Your new washer-dryer
Filling laundry detergent
and/or additive dispensers.
Chamber I:
Detergent for pre-wash,starch,
or pre-soaking agent.
Chamber II:
Detergent for main washing period,
water softener, blench and stainremoving salt.
Chamber :
Additives, e.g. fabric softener or
former(Do not exceed Max )
Open the loading door
and close it
Drain washing solution
if necessary.
B
Operating Instructions
6
Control Panel
,,
Start
button
For starting the wash/dry cycle
(programme must have been
selectd).
,,
Buttons for additional options
(In addition to the programme if
required)
Intensive Stains: extend the
washing duration
Extra Rinse: additional rinsing cycle
Less Ironing: gentle spin
Prewash: actuate prewash
Program selector
For switching the washer-dryer on and off and for
selecting the programme. Can be rotated in either
direction. If rotate it during the washing/drying,
the programme will be stopped. The programme
sequence is electronically controlled.
Display pannel
Indicates the settings which have
been selected(e.g. Spin speed, Time
delay, Childproof lock, Maximum load)
Button
Selects the start time(delays the
start of the programme).
Button
Select the drying time
Additional options can be combined.
The indicator lights of the buttons
come on if the additional options
are active.
Switching off the additional option:
Press the button again. Indicator
light goes out.
Button
Selects the spin speed or no final spin.
Operating Instructions
7
Display
Display panel
q
Prewash
Washing
Notes
On if selected
Not on if rinse,spin or
drain additional programme
was selected
Rinse
Not on if spin or drain
additional programme was
selected
Final spin/Empty
Not on if a programme with
the --- ,,setting(without
final spin)
Drying
Not on if dry programme or
dry time was selected
Progress bar
For the programme status
Overdosage
On if too much detergent
dispensed
Childproof lock
On if selected
Fan
Not on if dry programme or
dry time was selected
,,
kg* Maximum load
Z
* Spin speed or
---* no final spin
min*Drying time
* Start time
Not on if rinse, spin or
drain additional programme
was selected
Maximum spin speed of the
programme or selected speed
Selected drying time
Selected start time
Other displays at this location:
1:00* Programme duration
Expected programme duration
End of programme or
---
End of programme without final spin or
E02* Fault display
See page 33
* Examples of the display, it will be changed
according to your selected program.
B
Operating Instructions
8
Programme status display
The first row of symbols and the progress bar below form the
programme status display. The progress bar consists of a
frame and several segments.
When the programme has been selected, the symbols forthe in
-dividual programme sections are displayed. The frame of the
progress bar flashes and requests the programme to start.
When the programme has started, the almost empty bar is
displayed which fills up with segments from left to right while
the programme is running. The symbols indicate the
programme sections which have not yet run and go out when
the particular programme section has run.
At the end of the programme all symbols have gone out and
the progress bar is full.
Overdosage
The automatic safety system detects excessive froth in the
appliance due to a highly frothing detergent or an overdosage
At the end of the programme this is indicated in the display field
by the
symbol. Dispense less detergent for the next wash with similar items of washing(same degree of soiling and
wash load).
Overdosage of detergent may cause excessive froth formation and impair the washing and rinsing results. A rinse cycle
is automatically run.
i
The
symbol goes out when the appliance switches off
at the end of the program or if the programme is changed.
Childproof lock
The activated childproof lock prevents the selected programme
from being changed while the programme is running, see
page 23.
The fan works at the last 10 minutes of drying duration for
cooling the laundry.
i Do not interrupt this cooling process.
Maximum load
The maximum wash/dry load is displayed depending on the
selected programme and additional functions, see page 26.
Spin speed
The maximum spin speed is displayed depending on the
selected programme and additional functions.
in
sp )
um pm
im (r
ax ed
m pe
s
Program
cottons easy-care delicates
wool
washing
rinsing spinning
model
WVT52050
1000
800
600
800
800
800
800
WVT52458
1200
800
600
800
800
800
800
Operating Instructions
9
Programme duration
When the programme has been selected, the expected
programme duration(time after which the programme is
expected to end) is displayed.
The programme duration is displayed in hours and minutes, e.g.
01:17
1 hour and 17 minutes
00:35
35 minutes.
When the programme has started, the colon : flashes between
hours and minutes and the programme duration counts down
in minutes.
When the programme ends, the displays shows
(if select no final spin function, see page28).
i While the programme is running,the programme duration
may be extended or reduced for the following reasons.
Reductions in time occur because of :
small loads,
reduced heating times, e.g. If the water is very hot.
Increases in time occur because of:
additional rinse cycle if excessive foam is in the laundry,
multiple spinning if the laundry is distributed poorly in the
drum,
increased heating times, e.g. When the water is
too cold,
water pressure too low,
selection of an additional option, e.g. Intensive Stains
function after the programme has started.
Very absorbent washing extends the heating duration.
Start time
You can delay the start time,see page 22
Drying duration
You can set the drying duration.
When the washing and drying without a break was selected, drying duration will add in programme duration automatically. Cotton quick washing programmes will prolong
10 minutes and other cotton programmes will prolong 5
minutes for good washing performance.
B
Operating Instructions
10
Basic programme
,,
Select
,, the desired programme(refer also to Programme
table ).
Cold, 40 ℃ Cottons/coloureds
For hard-wearing fabrics.
30℃ quick washing Cottons/coloureds
For less soiling fabrics made from cottons or linen. This
duration is shorter.
60℃ Cottons/coloureds
For very dirty ,hard-wearing fabrics.
Select this programme can remove stain as protein and so on.
90℃ Cottons/coloureds
An energy-intensive program for heat-resistant fabrics made
from cotton or linen.
For the protection of the drainage pipe, the hot washing
solution is mixed with approx. 5 liters of cold water before
being drained.
Intensive dry
For cottons/coloured textiles, dry at normal heat setting.
Cold,40℃,60℃ Easy-care
For easy-care fabrics made from cotton, synthetics or blend
-ed fibres.
Gentle dry
For easy-care textiles, dry at low heat setting.
30℃ Delicates
For sensitive, easy-care fabrics made from cotton, synthetics
or blended fibres, and net curtain. No spinning between rinsing cycles.
Cold,30℃ Wool
For hand or machine-washable fabrics made from wool or
wool blend.
Operating Instructions
11
Additional function
Washing
Separate washing cycle.
Rinsing
Separate rinsing cycle with subsequent spin cycle for easy
care fabrics.
Spin
Separate spin cycle. Washing solution or rinsing water is
drained prior to the spin cycle.
Drain
Draining of the rinsing water after a wash programme with
the without drain setting for the gentle treatment of delicate
laundry.
Additional function
(You can select an additional function if necessary)
Intensive stains
For very dirty clothes, the washing duration will be prolong
-ed 20 to 60 minutes after pressing this button, and this is
decided by the programme that you selected.
Extra rinse
An additional rinsing cycle performed; the washing duration will be prolonged 10 minutes.
Less Ironing
Special spin cycle with post-spin loosening cycle The laun
-dry is left lying loosely in the drum, thus reducing creasing.After pressing this button, the washing duration and
max spin speed will be changed.
cottons
Easy
-care delicates wool rinsing spinning
30℃ others
washing prolonged time 10 min 5 min 5 min
maximum spin speed
800rpm
5 min
no
5 min
5 min
600rpm
Prewash
For very dirty fabrics,washing duration will be prolonged
20 minutes.
Observe the maximum load for each type of fabric;
Remove the laundry immediately after the spin cycle.
B
Operating Instructions
First Wash Cycle
12
The installation of the washer-dryer is finished.
(See page 36-42)
Each washer-dryer has been tested in the factory. A little bit
of water can be left in the drum during the test. Please carry
out the first wash cycle without laundry to remove any water
left over from the factory tests.
Do not load any laundry.
Turn the tape ON.
Pull the detergent drawer out as far as it will go.
Input about 1 liter of water in chamber II.
Pour half a measuring cup of detergent into chamber II.
Do not use a special detergent for delicates or wollens as
these will create too much foam.
Close the detergent drawer.
Close the washer-dryer door.
Turn the programme selector to 90 ℃ Cottons/coloureds.
,,
Press the Start button. The washing program starts.
,,
The programme ends when all symbols in the upper row
of the display field go out, the progress bar is completely
filled and the programme duration is on
,the buzzer
sounds.
Turn the programme selector to off position.
Preparing/sorting and
loading the laundry
Preparing the laundry
Remove any loose items or metal objects, such as safety
pins, paper clips, etc. from the laundry.
Brush sand, coins, etc. out of pocket and cuffs.
Close zips and button up cushion covers, duvet covers, etc.
Remove curtain runners, or secure them in a net bag.
Particularly delicate items, such as tights or lace curtains,
or smaller items, such as tiny socks or handkerchiefs,
should only be washed in a net bag or pillow case.
Some items are best turned inside out. These included
knitwear, trousers, T-shirts and sweatshirts.
Operating Instructions
13
Make sure that the wire-cup bras are machine washable.
Make sure that wire-cup bras in a pillow case which can
be securely closed with a zip or buttons. If the wire works
itself out of the cup it may fall through the holes of the
drum and cause extensive damage.
Preparing laundry for drying
Only tumble-dry textiles which have been washed, rinsed
and spun.
Remove as much water as possible from the laundry. Do
not press the button for reducing the spin speed.
Before tumble-dring, ease-care items should also be spun
using the appropriate spin programme (see programme
table)
In order to ensure uniform drying, sort the items according
to fabric type and degree of drying required.
Easy-care items should if possible be removed from the
washer-dryer while still slightly damp and allowed do continue drying in the open air. Overdrying may cause excessive creasing.
Items which require ironing do not have to be ironed immediately after being tumble-dried. It is a good idea to fold or
roll them together for a while, so that any remaining moisture is evenly distributed.
Sorting the laundry
Sorting the laundry
According to colour and degree of dirt
Caution
Items of clothing can become discoloured. Never wash new
multi-coloured items together with other items.
White items may become grey. Always wash white and
coloured items separately.
Degree of dirt
Slight dirt
No recognizable dirt or staining. Laundry may have some
body odour.
- Light summer clothing and sportswear that has only been
worn for a few hours.
- T-shirts, shirts and blouses that have been used for one day.
- Bed linen and guest towels that have been used for one day.
B
Operating Instructions
14
Normal dirt
Visible dirt and/or some light staining recognizable.
- T-shirts, shirts and blouses that are very sweaty or have
been worn several times.
- Underwear that has been worn for one day.
- Tea towels, hand towels and bed linen that have been used
for up to one week.
- Net curtains (without nicotine staining) that have not been
washed for up to 1/2 year.
Intensive dirt
Dirt and/or staining reconizable.
- Kitchen hand towels that have been used for up to one week.
- Fabric napkins.
- Children's outer clothing or football shirts and shorts with
grass and soil stains.
- working clothes such as overalls or baker's and butcher's
coats.
Typical stains
- Skin fat, cooking oils/fat, sauces, mineral oil, wax(containing
fat/oil)
- Tea, coffee, red wine, fruit, vegetables(blea chable).
- Blood, egg, milk, starch(containing protein/carbohydrate).
- Soot, soil, sand(pigments), red sand on tennis clothes.
Removing stains
Wherever possible, remove/pretreat stains whilst they are still
fresh. First, dab soapy water onto the stain. Do not rub.
Subsequently wash the items of clothing using the appropriate
program. Several washing cycles may sometimes be required
in order to remove stubborn/dried in stains.
Operating Instructions
15
Sorting laundry according to their care label
specifications
Only wash laundry that is labelled with the following care
symbols:
95
90
90 ℃ Cottons + lines
60
40
30
60℃, 40℃, 30℃ Cottons + lines
60
40
30
60℃, 40℃, 30℃ Easy-care
40
40
30
30
40℃, 30 ℃ Delicates
40
40
30
30
40℃, 30℃ Wollens (hand and machine-washable)
Laundry that is labelled with the following care symbol must
not be washed in the washing machine.
= do not wash
Only dry laundry that is labelled with the following care symbols
=Tumble-dry at normal heat setting (intensive dry)
=Tumble-dry at lowl heat setting (gentle dry)
The following textiles should not be tumble-dried:
Laundry marked with the care symbol:
=Do not tumble-dry
- Wollens or items containing wool. Risk of shrinking!
- Delicate fabric (silk, synthetic net curtains). Risk of creasing.
- Items containing foam rubber or similar material.
- Items which have been treated with inflammable solvents,
such as stain removes, petrol, paint thinners.
Explosion hazard!
- Items still containing hair lacquer or similar substances.
Dangerous vapors!
- Dripping-wet laundry. Waste of energy!
B
Operating Instructions
16
Loading the laundry
! Risk of explosion
Items of clothing that have been pretreated with solvent-based cleaning agents, e.g. Stain remover and dry cleaning spirit,
represent an explosion hazard once loaded into the washerdryer.
Therefore, these items must be rinsed thoroughly by hand.
Risk of explosion
Loose debris in the washer-dryer drum can damage the
laundry. Before loading the laundry, check that there is no
debris in the drum.
Open the loading door.
Unfold the sorted items of clothing and place them loosely
into the drum. Mix up large and small items. Items of varying size will distribute better during the spin cycle..
Do not exceed the maximum load: Overloading will cause
poor wash/dry results and encourage creasing.
When washing/drying a small amount of laundry, the
washer-dryer automatically reduces the amount of the
water and energy used.
Close the loading door.
Take care not to trap any items of clothing between the
loading door and rubber seal.
klack
Operating Instructions
Laundry Detergents
and Additives
17
! Risk of explosion
Do not use solvent-based cleaning agents in fully
automatic washer-dryer. Explosion hazard.
Keep detergents and additives out of the reach
of children.
You can use any standard powder or liquid detergent
which is suitable for automatic washer-dryer.
Do not use any detergent boosters containing solve
-nts or dirt and stain-removing spraying near the ma
-chine, as these could damage the machine.
Do not use non-automatic detergent as these produce too much foam.
Amount of detergent
The best washing results will only be achieved if you add the
correct amount of detergent.
Observe the instructions for use shown on the detergent pack
-ing
When using liquid detergents, you can use any measuring aids provided with the detergent, such as dosage balls of bags.
Please put the liquid detergents into correct chamber.
The amount of detergent depends on:
- water hardness
- degree of soiling
- size of load
- amount of detergent to be added according to its manufactu
-rer.
Dispensing the correct amount of detergent relieves the strain
on the environment and ensures optimum washing results.
Frequent use of insufficient detergent will eventually become
noticeable as followings:
- washing appears grey or not properly clean
- grey-brown stains (grease marks) form on the washing
Too much detergent results in:
- unnecessarily high environmental pollution
- due to the generation of too much foam, the washing is hard
-ly agitated which leads to poor washing results.
The amount of detergent indicated on its packaging refers to
a full machine load.
For small loads or less soiling, reduce the amount of detergent.
B
Operating Instructions
18
Filling laundry detergent and/or additive
dispensers
,,
- Do not fill beyond the Max mark, otherwise will be flushed
into the machine together with the detergent at the start of
the program.
,,
- If the liquid addtive is thick, mix with a little water before dis
-pensing (prevents clogging of the overflow).
Pull out the detergent dispenser up to the end stop.
Add the detergent and/or additive.
Close the detergent dispenser.
Washing/drying with
standard settings
Your washer-dryer can be used in three ways:
- washing only,
- drying only,
- washing and drying without a break in between.
Caution:
For interrupted washing and drying, the maximum load must
be reduce to 2.6kg for cottons/coloureds or 1.5kg for easy-care.
Furthermore, it is possible that certain types of laundry will not
be dried satisfactorily using the non-stop mode.
The economic using way: wash and dry with recommended
loads.
Setting the washing programme or washing and
drying without interruption
(Example of easy-care 40 C programme)
1. Turn the tap ON.
Operating Instructions
19
2. Turn the programme selector to the desired programme
(see programme sheet, page 26).
3. If required, press the button(s) for additional option(s).
The indicator light of the selected button is on.
4. The frame of the progress bar flashes in the display field
and the following is displayed for the selected programme:
- the symbols for the programme sections,
- recommended load,
- maximum spin speed,
- drying duration (displays 0 min, if the laundry needs to be
dried, please refer to setting the drying time),
- programme duration.
Load the laundry and close the loading door.
Do not exceed recommended loads.
If you do not need your laundry to be dried immediately
in the machine after the washing programme, please read
the instructions for starting the programme. Otherwise,
please set the drying time according to the instructions.
5. Press the
button to set the desired drying time, the
programme will be washing and drying without interruption.
The indicator light of additional function goes out if the
additional function is selected, it is not available when a
drying cycle comes subsequently.
The spin speed and programme duration will be changed
accordingly after the drying time being setted. See page 9.
The maximum load is also changed, do not exceed
recommended washing/drying loads.
B
Operating Instructions
20
The frame of the progress bar flashes in the display field
and the following is displayed for the selected programme:
- the symbols for the programme sections, drying
and
fan ,
- recommended load,
- maximum spin speed,
- drying duration,
- programme duration.
,,
Press the Start button. The programme starts.
,,
i The almost empty progress bar is indicated in the display
field. The recommended load goes out. While the programme is running, the programme duration counts down and
the progress bar fills up with the segments. The symbols
for the run programme sections go out.
Setting the drying programme
1. Turn the tap ON.
Due to the use of the condensation principle in drying,
please keep the connected water tap open during the
drying process.
2. Turn the programme selector to the desired programme.
(See programme sheet, page 26)
Operating Instructions
21
3. Press the
button to set drying time.
The frame of the progress bar flashes in the display field
and the following is displayed for the selected programme:
- the symbols for the programme sections, drying and
fan ,
- recommended drying load,
- drying duration,
- programme duration.
Load the laundry and close the loading door.
Do not exceed recommended loads.
,,
4. Press the Start button. The programme starts.
,,
i The almost empty progress bar is indicated in the display
field. The recommended load goes out. While the programme is running, the programme duration counts down and
the progress bar fills up with the segments. The symbols
for the run programme sections go out.
Washing and drying with individual is described subsequently.
Washing/drying with
individual settings
You can adjust the setting to your requirements. First find a
quick overview of the adjustable settings. The steps for
changing the setting are described in detail overleaf.
Turn the program selector to the desired program
Load the laundry and close the loading door
Spin speed
Page 22
Start time
Page 22
Buzzer adjustment
Page 25
Or without final spin
Can beZ set in 1-hour steps
Z
Open
Close
No sound
ZZ˜ further settings or press the start button
Make
Childproof lock
Page 20
B
Operating Instructions
22
Spin speed
The maximum displayed spin speed depends on the selected
programme.
Press
button until the required spin speed.
i If setting --- ,, (without final spin) has been selected, the
,,
washing remains in the final rinsing water.
Before the laundry can be unloaded, the Empty or Spin
program must be performed. Or pressing
button to
select the desired spin speed.
i The spin speed can be changed at any time by pressing
the
button
,, until the desired speed is displayed.
Setting --- (without final spin) is possible until the
Rinse programme section starts.
,,
Start time
Before a programme start, you can specify by how many
hours the start of the programme is to be delayed.
Press the
button,
appears in the display.
Press the
button until the desired number of hours is
displayed.
i The first line of the programme flashed between and .
i The start time can be set in 1-hour steps. The time can be
delayed up to a maximum of
. If a start time of
has been set , the programme duration time can be
accessed by pressing the
button again.
i The time delay is counted down by the hour. When the
start time has elapsed, the programme starts automatically
and the programme duration is displayed.
i Changes to the start time or an immediate start are
possible. To do This:
Briefly set the programme selector to another program.
When the programme selector has been reset to the
original programme, individual or all other settings may
have to be re-selected. If required, reset the start time.
,,
Press the Start time. The programme starts.
,,
Operating Instructions
23
Childproof lock
You can secure your washer dryer to prevent selected
functions from being inadvertently changed.
If the childproof lock has been selected:
No changes can be made while the programme is running.
The symbol
changed,
flashes if a programme setting is inadvertently
Should the appliance be switched off and on while a prog
-ramme is running the program will continue at the point at
which it was interrupted.
Activating the childproof lock
Set the programme selector to the required programme.
If required, select other settings.
Load the laundry and close the loading door.
,,
Press the Start button. The programme starts.
,,
,,
,,
i Release the Start button.
,,
Press the Start button and hold down ( for approx. 4
seconds ) until the
symbol is displayed.
,,
Press the Start button, the childproof lock is activated,
the symbol is permanently on.
,,
,,
The childproof lock must be deactivated before making
,,
programme changes or ending programmes with setting --(without final spin).
,,
Deactivate the childproof lock
,,
Press the Start button and hold down (for approx. 4
seconds ) until the
symbols goes out.
,,
B
Operating Instructions
24
Change a programme
If you have accidentally selected the wrong programme:
If the childproof lock is active, temporarily deactivate; see
page 20
Turn the programme selector to a newly selected programme.
If Prewash is selected subsequently, set the programme
selectors to off and reselect the programme.
If required, change the other settings; see page 18.
,,
Press the Start button. The programme starts.
,,
Cancelling active program
If you wish to prematurely end a programme:
If the childproof lock is active, deactivate; see page 20.
Turn the programme selector to Empty or Spin programme.
If required,
select the desired spin speed (but not setting
,,
--- (without final spin).
,,
Press the Start button.
,,
,,
A pause in active programme
If you want to add/remove the laundry during active programme
and the set programme sequence will not be changed.
Remove the plug from the sockeet.
Wait about 2 minutes, open the loading door.
Add/Remove the laundry
Reconnect the power supply, the memory function of the
washer-dryer will continue the interrupted programme. So,
the time in the display field may be different from previous
display.
Also, in the case of power failure or the power is accidentally cut off, after the power supply comes back, the washer-dryer will continue the interrupted programme.
Operating Instructions
25
Signal
The acoustic signal indicates:
_
that the additional functions (buttons )have been switched
on or off,
_
Individual programme statuses(e.g. Start of programme,
end of programme), operating errors and faults.
Signal for switching buttons on and off
Press the button and set the programme selector to cottons/coloureds cold. Hold down the
button until the signal is emitted. The selected setting is stored.
i When the additional functions are switched on, a long sig-
nal is emitted; when the additional function is switched off,
the signal is short. The volume of the signal cannot be
changed.
Signal for programme status
The signal can be switched on and off ans the volume set
before the start or after the end of the programme.
Press the button and hold down until the signal is emitted and the volume of the signal changes.
Release the button when the required volume is reached.
The selected setting is stored.
B
Operating Instructions
26
Programme table
Extra rinsing
Less ironing
Prewash
Dry
Programme duration
in minutes
(approx. time)
Additional
functions
Intensive stains
Chamber
Chamber II
Chamber I
Programmme
Laundry up to(kg)
Detergent and
fabric softener
Always follow the
manufacture s care
label instructions
,
**
**
**
**
***
Cold
5.2
70(110)*
30℃ quick
5.2
39(59)*
40 C
5.2
80(120)*
60 C
5.2
80(138)*
90 C
5.2
95(135)*
2.6
Max 120min
40 C
2.6
60(80)*
60 C
2.6
70(90)*
1.5
Max 120min
Cottons/
coloured
Intensive dry
Easycare
Gentle dry
Silk
30 C
2.0
35(55)*
Wool
30 C
2.0
40(60)*
washing
3.5
20(40)*
rinsing
14
spinning
8
draining
1
,,
,,
duration after
* Time shown in ( ) is the program
,,
,, selecting ,, Intensive Stains . = Obligatory
After
selecting
Extra
rinsing
or
Less
ironing
or
Prewash
,
the
program
**
= optional
duration will prolong,see page 12.
The
following
duration
is
required
when
you
operate
the
machine
according
to
***
the instruction
of user manual (page 21 to 26).The display mode is hour:
,,
minute . The duration will be changed according to the program process. If the
jumping phenomena is occured,it is normal.
,,
,,
,,
,,
,,
,,
Operating Instructions
27
Programme table: drying
cottons/coloureds (cotton, linen)
Dry weight in Kg
0.5
1.0
1.5
2.5
Drying time selector
Cupboard dry
50-60
60-70
70-80
90
Iron
40-50
50-60
60-70
70-80
Intensive
dry
Easy-care / synthetics
Dry weight in Kg
0.5
1.0
1.5
Programme
selector
Drying time selector
Easy-care
Acrylics
40
50
70
25
25 - 30
Gentle dry
Times are approximate and refer to standard loads.
The maximum selectable drying time is 120 minutes.
B
Operating Instructions
i Display panel:
All symbols on the programme status display have gone
out, the full bar is displayed.
The programme duration is on
.
If the childproof lock is selected, the
If the detergent was overdosed, the
symbol illuminates.
symbol illuminates.
Selected spin speed illuminates.
If the drying time was selected, the drying time illuminates.
If required, deactivate the childproof lock.
Turn the program selector to off position.
,,
,,
Setting - - - (without final spin ) selected
i Display panel:
The
symbol and the full bar are indicated on the
programme status display.
,,
The programme duration is on - - - .
,,
When the Program
has ended
28
If the childproof lock is selected, the
symbol illuminates.
If required, deactivate the childproof lock.
Select an additional programme Empty or Spin.
Or press
button to select spin speed.
Press the start button.
After Empty or Spin programme ends, if detergent was
overdosed, the
symbol illuminates.
Turn the programme selector to off position.
Operating Instructions
29
Unloading the laundry
Turn off the water tap.
Open the loading door.
If the loading door can not be opened:
Wait for 2 minutes ( the safety function is active )
or
there is still water in the washer-dryer if the without
,,
final spin option
,, was selected.
,, In the latter case, select
the Draining or Spinning programme.
,,
,,
,,
Unload the laundry.
Caution:
Remove any debris (e.g. Coins, paper clips ) from the
drum and rubber seal---risk of rust formation!
Leave the loading door open to allow the inside the wash
-ing machine to dry out.
After tumble-drying:
Carry out the loads after drying immediately.
Cottons / coloureds
,,
- Cotton ans linen items which have been dried to iron dry
should be rolled together to prevent them from drying out
completely before they are ironed.
,,
- Cupboard dry items must be smoothed out and folded up.
,,
,,
Easy-care / synthetics
Hang shirts and blouses on individual hangers.
Cleaning and Care
! Risk of electric shock!
Always disconnect the appliance from the mains
before cleaning.
Never clean the washer-dryer with a jet of water.
! Risk of explosion!
Never use solvents to clean the appliance.
Cleaning the appliance housing and control
panel
As required:
Use hot soapy water or a mild, non-abrasive cleaning
agent.
Rub dry with a soft towel.
B
Operating Instructions
30
Cleaning the drum
In the event that rust spots have formed due to leftover
debris (e.g. Coins, paper clips, needles, nails):
Use a chorine-free cleaning agent. Follow the manufactur
,
-er s instructions. Never use steel wool.
Clean the detergent dispenser
In the event that residual detergents or additives have
accumulated.
Pull out the detergent dispenser up to the end stop.
Press down the hollow on the insert and remove the
detergent dispenser completely.
Pull up the insert.
Rinse the detergent dispenser under hot running water.
Push down the insert until it clicks into place.
Insert the detergent dispenser.
Clean the drain pump
This is necessary if the washing solution can not be complete
-ly drained. The pump is blocked by either loose debris or fluff which accumulates if fluff-giving fabrics are washed at high
temperature.
Draining the washing solution
The water in the drum should be drained first before cleaning
the drain pump. Have a suitable container ready.
Operating Instructions
Draining the
washing solution
31
! Risk of Scalding
Allow the hot washing solution to cool.
,,
Turn the programme selector to Off .
,,
Fold down the cover panel.
1.
Carefully remove the pump cap. But do not fully remove it
and allow a little more residual water flow into the suitable
container.
Remove the pump cap.
Remove any loose debris/fluff from inside the pump and
clean the pump. The pump impeller must be able to rotate.
Clean any residual suds or fluff from the thread of the
pump cap and pump housing.
Attach and tighten the pump cap.
Attach and close the cover plate.
To avoid unused detergent from flowing into the
drain during the next wash cycle:
Pour 1 litre of water into chamber II
,,
Select the Draining programme.
,,
Cleaning water inlet strainers
This necessary if very little or no water flows into the washing
machine.
First release the water pressure in the supply hose:
Turn of the water tap.
Turn the programme
,, selector to any,, programme.
(Except Spinning and Draining )
,,
Press the Start button, and allow the programme to run
for approx.40 seconds.
,,
,,
,,
2.
B
Operating Instructions
32
Cleaning the strainer at the water tap
Disconnect the hose from the water tap.
Rinse the strainer under flowing water.
Reconnect the hose.
Cleaning the strainer on the washing machine
Disconnect the hose from the back of the washer-dryer.
Pull out the stainer and rinse under running water.
Insert the strainer and reconnect the hose.
Turn on the water tap and check whether water is still
discharged. If water is still discharged, check that the
strainer is attached properly.
Turn off the water tap.
Descaling the washer-dryer
Caution:
Descaling agents contain acids which can attack parts of the
washer-dryer and discolour the laundry.
Provided that you use the correct amount of detergent, it is
not necessary to descale the washer-dryer.
If, however, descaling the appliance becomes necessary,
please follow the instructions provided by the descaling
agent manufacturer.
Frost protection
If the washer-dryer is located in a room which is exposed to
freezing temperatures, any residual water in both the pump
and the water inlet hose must be drained immediately every
time the machine is used.
Draining the pump: ,,
See Cleaning the pump on page 27,
Draining the water inlet hose:
1. Turn the tap OFF.
2. Unscrew the hose from the tap and hold the end of the
hose over a container.
3. Switch ON any of the washing programmes for approximately 40 seconds. Water left inside the inlet hose will be
drained out.
4. Screw the hose back onto the tap.
,,
Operating Instructions
33
! Risk of electric shock
Trouble Shooting
Minor Faults
Repairs must only be carried out by our Customer Service
or an authorized technician.
If repairs are needed, and assuming that you cannot eliminate the fault youself with the aid the following table:
Turn the programme selector to
Off .
Disconnect the washer-fryer from the mains.
Turn off the water tap.
Call Customer Service.
A signal emitted
in display field
Possible cause
Action
E01
Door not colosed properly.
Check whether laundry is trapped in door;
Close the washer-dryer door.
E02
Tap not turned on.
Inlet hose kinked or pinched.
Filter blocked in water inlet
hose.
Water pressure too low.
Turn the tap on.
Eliminate cause.
Clean filter, see 31.
Lose debris is blocking the
pump;
Drainage pipe blocked
Clean the pump, see page 30;
E04
Eliminate cause.
Clean the drainage pipe.
Fault
Possible cause
Action
The washer-dryer door
cannot be opened.
There is water in drum.
Select Draining or Spinning .
Safety function is active.
Wait for 2 minutes.
Detergent was damp or
lumpy.
Clean and dry the detergent
dispenser(refer to Page 30)
,,
,,
,,
Detergent residue in the
detergent dispenser.
,,
Use the dispensing aid for liquid
detergent.
The gasket is crimped.
This may appears after
Remove the transport bolts, operate
installing the transport bolts. the machine for a period of time, the
gasket will return to the original shape.
The belt gets off the pulley.
Too much laundry is in the Put in the laundry well and according
drum or the laundry is put in to the maximum load specifiction.
badly, and close the window
with excessive force.
B
Operating Instructions
34
Fault
Possible cause
Action
Control lights do not
come on.
A fuse has triggered.
Switch on/replace the fuse.
Call Customer Service if this fault
is repeated.
Power failure.
An interrupted program will be resumed when power retures. If you
wish to unload the laundry, proceed as in Cleaning the drain pump ,
Page 30.
Plug is loose or not inserted.
The programme
does not start.
Loading door not closed.
Check whether laundry is trapped
in door.
Close the loading door(a click should be heard).
,,
,,
,,
,,
Start button does not
pressed.
Press the Start button.
Water does not enter the
machine or detergent is
not wash away.
Water tap not turned on.
Turn on water tap.
Detergent in chamber I is
not wash away.
Strainer in supply hose
clogged.
,,
Prewash function is
not selected.
,,
Clean the strainer
(refer to Page 31)
,,
Press Prewash button
Water cannot be seen in
drum.
This is not a fault.
The water lies below the visible part of the drum.
Motor noise
Not a malfunction! It is normal for noises to be heard while the
motor is running.
Pump noise
Not a malfunction! It is normal for noises to be heard from the
pump during the start or the final stage of draining the drum.
Vibrations when
washing and spinning
Transit bolts not removed.
Follow the directions in the installation instructions (page 37)
The machine s feet were
not secured.
Realign the machine using a spirit
level,see the installation instructions.
Washing solution is not
completely drained.
Loose debris is blocking
the pump.
Clean the pump.
(refer to Page 30)
Water is flowing out from
underneath the machine.
Fluff-producing laundry was Clean the water drainage pipe
washed at a high temperat- and/or drain hose.
ure. The water drainage
pipe or drain hose is
blocked.
The thread of the supply
Tighten the thread.
hose is not tight.
Leak in the drain hose.
To much detergent.
,,
Foam coming out of the
detergent dispenser.
Replace the drain hose.
Mix1 tablespoon of fabric softener
with 1/2 litre of water and pour
into chamber I of the detergent
dispenser.
Reduce the amount of detergent
next time.
Operating Instructions
35
Fault
Possible cause
Repeated spinning at short
intervals.
This is not a fault.
The imbalance compensation system is attempting to balance
the load through repeated spins.
The program takes longer
than usual.
This is not a fault.
The imbalance compensation system is attempting to
balance the load by distributing the laundry more
evenly.
Wash large and small items
together to reduce imbalances.
The foam detection feature
has activated an additional
rinsing cycle to reduce the
amount of foam.
Add a more appropriate amount
of detergent next time.
Drying programme not
selected.
Select the desired dying
programme.
Drying time not set,
or
set drying time is too short.
Set the reasonable drying
time.
Tap not turned on.
Turn on the tap.
Washer-dryer door not
closed properly.
Check whether laundry is
trapped in door.
Close the washer-dryer
door ( click should be heard).
Pump is blocked.
Clean the pump, see page 30
The degree of dirt was
higher than supposed.
Select a more suitable program.
Not enough detergent.
Add detergent according to the
manufacturer's specifications.
Detergent residual on the
laundry.
Some phosphate-free
detergents contain
water-insoluble residues
that may appear as light
spots on the laundry.
Select Rinsing immediately, or
brush off spots when laundry is
dry.
Grey residues on the
laundry.
Dirt accumulation from
ointments, fats or oils.
Add the maximum amount of detergent and select the highest
permissible temperature next time.
Programme duration
changed during the
programme sequence
Not a fault.
See also explanations in the chapter programme duration
from page 9.
Unsatisfactory washing
result.
,,
The program takes longer
than usual.
Action
,,
B
Operating Instructions
36
Installation, Connection Safety information
and Transport
! Risk of injury
The washing machine is heavy. Take care when lifting it.
Caution
Frozen hoses can tear/burst. Do not install the washerdryer
outdoors or in an area prone to frost.
Take care not to damage the washer-dryer . Do not hold onto
protruding parts (e.g. Loading door ) when lifting.
In addition to the safety information listed here, the local water and electricity supplier may have special requirements.
If in any doubt, have the appliance connected by an authorized technician.
Before leaving the factory every machine is thoroughly tested
under operating conditions any moisture or residual water
which you may find in the machine or grainage hose are left
over from this testing.
On the back of the machine:
- Water drain hose.
- Power cord.
The following tools are helpful:
- Wrench.
- Spirit level.
Dimensions
a=595mm
b=400mm
c=860mm
Approx. weight=68Kg
Operating Instructions
37
Installation location
To ensure the proper operation of the washer-dryer, please
pay attention to the following when you install the machine.
The floor should be solid and flat, never put the machine
on the soft carpet or on the wood floor.
Keep the environment dry and vented.
Never put small appliance, such as microwave oven; and/
or jar cooker, on the machine.
Keep the machine away from the flaming equipment, such
as candle, cooking stove, liquefied gas container etc.
Never put the pressure containers on the machine.
Never put the machine over the opening of uncovered
drainage.
In the case of suspended wooden floors, place the machine on a water-resistant wooden board (plinth ) of at least
30mm thicknees which is screwed to the floor. If possible,
install the machine in a corner of the room. Secure the
,
machine s feet with brackets (this applies partcularly to
tower arrangements).
,
If the machine is installed on a plinth, the machine s feet
must be secured with brackets to prevent it sliding when
spinning.
Removing the transport bolts
The transport bolts must always be removed before using the
appliance for the first time and must be retained for any subsequent transport (e.g. When moving)
Use the spanner provided only if a ring spanner is unavailable.
Loosen all four transit bolts with the wrench until they are
freely movable.
If not all parts have been removed and have falled into the
button of the washer-dryer: open the door, pull the drum
forwards slightly, reach in and remove the parts.
A
B
B
Operating Instructions
38
Insert the covers.
D
C
Hose and cable lengths
~100cm
~110cm
max.100cm
Left-hand connection
cm
~150cm
~140cm
~150c m
max.100cm
Right-hand connection
~110
Caution:
In order to avoid siphon, do not put the outlet hose into a
container with water.
Operating Instructions
39
Water connection
Water supply
For the water connection a standard cold-water line with a
minimum water pressure of 0.1MPa is required (with tap full
ON, at least 8 litres of water must flow out in one minute). If
the water pressure exceeds 1MPa, a pressure reducing valve
must be added.
Never connect the machine to the mixer tap of a pressureless hot-water heater.
Caution! Connections are under full water pressure,
check for leaks with tap turned fully ON.
The filters at the free end of the inlet hose and at the back
of machine should only be removed for cleaning purposes.
To avoid water damage, the tap must be turned OFF after
using the machine.
The plastic nuts on the hose connections must only be
tightened by hand.
For tight connection between washer-dryer and water
source, you can:
G 1/2
1. Call Customer Service before you install the machine,
get the plastic connector freely. It may connect tightly the
water inlet pipe and your water tap.
Plastic connector
CS code 424387
2. Or you may purchase the specific water tap from customer service. It is designed by factory. It may be better connected with machine than your water tap.
Note: The water tap is not free.
Water tap
CS code 184611
Caution:
Do not disassemble the water inlet hose frequently, the
untight connection will lead to leakage. We suggest that
you use a water inlet hose specially for the washer-dryer.
If you need lengthen the water inlet hose together with the
machine, please contact local ASS center/station or leader
to buy additional lengthening hose.
Additional lengthening water inlet hose is not free.
B
Operating Instructions
40
Water Drainage
Caution
Do not bend or pull the water drainage hose.
Height between the placement area and drainage point:
maximum 100cm
Drainage into a wash basin (The hose elbow is in the drum).
Caution
The plug must not block the drain of the wash basin.
Secure the water drainage hose so that it does not slide
out.
When water is being drained, check that the water flow is
fast enough.
Leveling procedure
All four appliance feet must be firmly on the ground.
The washing machine must not wobble
Level the washer-dryer with the assistance of the four
adjustable feet and a spirit level.
Loosen the counter-nut 1 using the wrench.
Adjust the height by means of turning the appliance foot 2.
Tighten the counter-nut 1.
Operating Instructions
41
Transport e.g. when moving
Before transporting the washer-dryer:
Turn off the water tap,
Drain any residual washing solution (refer to Page 30),
Release the water pressure in the supply hose(refre to
Page 30),
Disconnect the washer-dryer from the mains,
Dismantle the supply and drainage hose,
Install the transport bolts.
Having transported the appliance and ensured proper installation and connection, allow the Draining program to
run through before starting the first wash program.
Preparing and inserting the transport bolts
Remove the covers C.
Remove the rear panel D (see page 38), prepare the
transport bolt.
Insert and tighten the bolts.
Reinstall the rear cover D.
B
Operating Instructions
42
Electrical connection
When heating, the maximum current of the washer-dryer is
10A, so please make suer that the power supply system
(voltage, current and cable) is applicable to the load of
theapplied appliance.
The machine must only be connect to an alternating current supply via a correctly installed earthed socket.
The voltage indicated on the rating plate at the back of the
machine must match the mains voltage at the installation
location.
Connected load and required fuse or line protecting cut-out
are indicated on the rating plate.
It must be ensured that the plug and socket match, that the
conductor cross-section is sufficient and that the earthing
system has been installed in compliance with regulations.
Multiple plug connectors and extension cables must not be
used.
Do not connect the machine to electrical outlets while your
hands are wet or damp.
To remove the plug from the socket, grasp the plug firmly
and pull it out. Do not pull at the cable.
If the supply cord is damaged, it will be replaced by a special cord or a assembly available from the manufacturer or
its service agent.In the event that an earth-leakage circuit breaker is to be
used, only use types marked with the following symbol:
. Only this symbol can guarantee compliance with all
current regulations.
Technical Data & Package Sheet
43
Technical Data
Models
WVT52458
Items
Rated voltage:
220V~
Rated frequency:
50Hz
Washing capacity:
5.2kg
Spinning capacity:
5.2kg
Drying capacity:
2.6kg
Water pressure:
0.1~1MPa
Water proof: IPX4
200W
Washing power:
450W
Spinning power:
1800W
Heating power:
1500W
drying power:
2000W
Maximum power:
10A
Maximum current:
Package Sheet
Models
WVT52458
Items
Washing machine 1
User manual
1
Fastening plug
4
Inlet hose
1
Bottom cover
1
B
Customer Service
Repair Indicator
44
According to the Regulations of Responsibility concerning
Repair, Exchange and Return of some commodities, warranty period of appliance purchased for home use purpose
is one year for the complete unit and three years for the
functional parts. Warranty period of appliances purchased
for business, commercial or company use is 3 months for
complete unit and functional parts unless otherwise specified in the contract.
Warranty period for appliance sold at reduced prices is
same, but no warranty claim for price reduced position.
Within warranty period, the consumer should show the valid purchase invoice of the appliance and other relevant
guarantee documents defined by the manufacturer when
asking for free of charge repair. Consumer should keep the
warranty card and the purchase invoice properly and show
them together when asking for free of charge repair. The
warranty period starts from the invoice date. If the customer loses the invoice, it starts from the manufacturing date.
The following cases are not covered by the free of charge
repair and should be paid by the customer:
Damage caused by improper transportation, installation,
operation, maintenance and storage by customer.
Damage caused by power supply on customer site less
than 187V or more that 240V.
Damage caused by unauthorized repair.
Without valid purchase invoice or without relevant
guarantee document.
The guarantee document is amended by customer or
does not accord with the appliance.
Damage caused by force majeure.
Out of warranty.
If the appliances are used under condition of improper power supply, water supply, temperature or humidity, the damage and loss are not covered by the free of charge repair and should be paid by the customer.
Because the factors mentioned above is beyond the control of manufacturer.
Door
门标签label.
In order to provide prompt service, our service staff needs
speciific information about the appliance.
Please inform the following us to in details:
Exact address and telephone number.
Failure description.
Date of purchase.
Product number (E-Nr.) and Production date(FD).
This Nr. can be found on the door label.
Customer Service
Service Assurance
45
24 hours hotline service
Door to door service within 24 hours within city boundary
Free of charge installation except additional material cost
Free of charge once transfer within one year.
Free of charge consulting
Be responsible for service a lifetime long
B
Customer Service
Warranty
card
46
Customer Name
Contact telepone
Address
Purchase date
Product code
Invoice no.
Maintenance station
Station telephone
Record sheet 5
Customer Name
Address
Purchase date
Invoice no.
Product code
Production date
Maintenance date
Serial number
Customer Name
Address
Purchase date
Invoice no.
Product code
Production date
Maintenance date
Serial number
Customer Name
Address
Purchase date
Invoice no.
Product code
Production date
Maintenance date
Serial number
Record sheet 4
Record sheet 3
Record sheet 2
Customer Name
Address
Purchase date
Invoice no.
Product code
Production date
Maintenance date
Serial number
Customer Name
Address
Purchase date
Invoice no.
Product code
Production date
Maintenance date
Serial number
Record sheet 1
5120 004791(PD 84 09 25)
800免费咨询电话:8008280088
全国统一客户服务专线:4008855888
未开通800地区拨打:0550-3062800 传真:0550-3072600
客户服务电子信箱E-mail: Careline.China@BSHG.com
B
Download PDF