Series S114
DPDT Non-Latching
Commercial Electromechanical Relay
CENTIGRID®
SURFACE MOUNT
COMMERCIAL RELAYS
DPDT
SERIES
RELAY TYPE
S114
DPDT basic relay
S114D
DPDT relay with internal diode for coil transient suppression
S114DD
DPDT relay with internal diodes for coil transient suppression and polarity reversal protection
DESCRIPTION
The S114 feature:
The Series S114 Surface Mount Centigrid® Relay is an ultraminiature,
hermetically sealed, armature relay. The low profile height (.360”) and .100”
lead spacing make it ideal for applications where extreme packaging density
and/or close PC board spacing are required. The specially formed leads are
pre-tinned to make the relays ideal for most types of surface mount solder
reflow processes.
• All welded construction.
• Unique uni-frame design providing high magnetic efficiency and
mechanical rigidity.
• High force/mass ratios for resistance to shock and vibration.
• Advanced cleaning techniques provide maximum assurance of
internal cleanliness.
• Precious metal alloy contact material with gold plating assures excellent
high current and dry circuit switching capabilities.
The basic design and internal construction are identical to the Series
114 Centigrid® relays, and are capable of meeting Teledyne Relays’
T2R® requirements. The following unique construction features and
manufacturing techniques provide overall high reliability and excellent
resistance to environmental extremes:
The Series S114D and S114DD relays have internal discrete silicon diodes
for coil suppression and polarity reversal protection
Part Numbering System
S114
-
26
/
R
Q = Solder-Coated Leads1
(Surface Mount Relays are
Solder-Coated by default)
R = RoHS Compliant Solder2
Relay Series
Nominal Coil Voltage
(26 = 26.5 V,
See Page 2 for more Voltages)
ENVIRONMENTAL AND
PHYSICAL SPECIFICATIONS
Temperature
(Ambient)
–65°C to +125°C
Vibration
(General Note I)
30 g’s to 3000 Hz
Shock
(General Note I)
50 g’s,
6ms half sine
Acceleration
50 g’s
Enclosure
Hermetically sealed
Weight
0.15 oz. (4.3g) max.
Reflow Temperature
260°C max. temp.
1 min. max
© 2016 TELEDYNE RELAYS
INTERNAL CONSTRUCTION
(800) 284-7007 • www.teledynerelays.com
S114 Page 1
S114\032016\Q1
Series S114
DPDT Non-Latching
Commercial Electromechanical Relay
SERIES S114
GENERAL ELECTRICAL SPECIFICATIONS (@25°C)
Contact Arrangement
2 Form C (DPDT)
Rated Duty
Continuous
Contact Resistance
0.10 Ω max.
Contact Load Rating (DC)
Resistive:
Inductive:
Lamp:
Low level:
Contact Load Rating (AC)
Resistive: 250 mA / 115Vac, 60 and 400 Hz (Case not grounded)
100 mA / 115 Vac, 60 and 400 Hz (Case grounded)
Contact Life Ratings
10,000,000 cycles (typical) at low level
1,000,000 cycles (typical) at 0.5 A / 28 Vdc resistive
100,000 cycles min. at all other loads specified above
Contact Overload Rating
2 A / 28 Vdc Resistive (100 cycles min.)
Coil Operating Power
450 mW typical at nominal rated voltage
Contact Carry Rating
Contact Factory
Operate Time
2.0 msec max. at nominal rated coil voltage
Release Time
S114: 1.5 ms max.
Contact Bounce
1.5 msec max.
Intercontact Capacitance
0.4 pf typical
Insulation Resistance
10,000 MΩ min. between mutually isolated terminals
Dielectric Strength
500 Vrms (60 Hz) @ atmospheric pressure
Negative Coil Transient (Vdc)
1.0 Vdc Max.
Diode P.I.V. (Vdc)
100 Vdc Min.
1 A/ 28 Vdc
200 mA/ 28 Vdc (320mH)
100 mA / 28 Vdc (320mH)
10 to 50 μA @ 10 to 50 mV
S114D, S114DD: 4.0 ms max.
DETAILED ELECTRICAL SPECIFICATIONS (@25°C)
S114-5
S114D-5
S114DD-5
S114-6
S114D-6
S114DD-6
S114-9
S114D-9
S114DD-9
S114-12
S114D-12
S114DD-12
S114-18
S114D-18
S114DD-18
S114-26
S114D-26
S114DD-26
Nom.
5.0
6.0
9.0
12.0
18.0
26.5
Max.
5.8
8.0
12.0
16.0
24.0
32.0
S114, S114D
50
98
220
390
880
1560
S114D
39
78
220
390
880
1560
Min.
93.2
57.8
33.0
25.6
17.5
14.8
Max.
128.2
74.8
42.9
32.8
22.1
18.5
3.5
4.5
6.8
9.0
13.5
18.0
BASE PART NUMBERS (S114, S114D,
S114DD)
Coil Voltage
Coil Resistance
(Ohms ±10% @25°C)
Coil Curent (S114DD)
(mAdc@25°C)
Pick-up Voltage
(Vdc, Max)
Drop-out Voltage
(Vdc)
(Note 5)
S114, S114D
S114,
S114D
S114DD
S114 Page 2
4.0
5.0
7.8
10.0
14.5
19.0
Min.
0.14
0.18
0.35
0.41
0.59
0.89
Max.
2.3
3.2
4.9
6.5
10.0
13.0
S114DD
Min.
0.6
0.7
0.8
0.9
1.1
1.4
Max.
2.8
3.4
5.6
6.5
10.0
13.0
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2016 TELEDYNE RELAYS
S114\022016\Q2
Series S114
DPDT Non-Latching
Commercial Electromechanical Relay
SERIES S114
OUTLINE DIMENSIONS
.031 REF (.79)
.035 REF
(.89)
.335 MAX
(8.51)
.100 4 PL
(2.54)
4° MAX TYP
4° MAX TYP
.045 MIN 8 PL
(1.14)
.275 MAX
(6.99)
.378 +.030
–.020 TYP
9.60 +.76
–.51
(
Ø.017 REF
(.43)
)
.100 TYP (2.54)
.360 MAX
(9.14)
.200
(5.08)
.410 MIN
(10.41)
.375 SQ MAX
(9.53)
.200
(5.08)
2° ±2° TYP
.200
(5.08)
(Note 6)
Dimensions are shown in Inches (Millimeters)
(Viewed From Terminals)
SCHEMATIC DIAGRAMS
7
6
5
1
8
2
4
8
7
6
3
5
S114
4
1
7
2
6
3
5
S114D
8
1
2
3
4
S114DD
NOTES:
1. RELAY CONTACTS WILL EXHIBIT NO CHATTER IN EXCESS OF 10 MSEC OR TRANSFER IN EXCESS OF 1 MSEC.
2. “TYPICAL” CHARACTERISTICS ARE BASED ON AVAILABLE DATA AND ARE BEST ESTIMATES. NO ON-GOING VERIFICATION TESTS ARE PERFORMED.
3. UNLESS OTHERWISE SPECIFIED, PARAMETERS ARE INITIAL VALUES.
4. FOR REFERENCE ONLY. COIL RESISTANCE NOT DIRECTLY MEASURABLE AT RELAY TERMINALS DUE TO INTERNAL SERIES DIODE.
5. MEASURED AT NOMINAL VOLTAGE FOR 5 SEC. MAX.
6. POSITION OF LEADS AS THEY EMERGE FROM RELAY BASE.
7. LEADS WILL FIT NOTED PAD LAYOUT WITH NO OVERHANG.
8. LEAD ENDS ARE COPLANAR WITHIN .008” WIDE TOLERANCE ZONE.
9. TERMINALS COATED WITH SN60 OR SN63 SOLDER PER QQ-S-571. KOVAR EXPOSED AT SHEARED END OF LEADS.
GENERAL NOTES
1. Relay contacts will exhibit no chatter in
excess of 10 μsec or transfer in excess
of 1 μsec.
2. “Typical” characteristics are based on
available data and are best estimates.
No on-going verification tests are
performed.
3. Unless otherwise specified, parameters
are initial values.
4. Relays can be supplied with a spacer
pad. See appendix.
PERFORMANCE CURVES (Note 2)
TYPICAL DC CONTACT RATING (RESISTIVE)
TYPICAL RF PERFORMANCE
INSE
10
20
30
40
50
60
70
LOSS
1.92
S
1.22
RN LO
RETU
CTS
A
1.07
T
N
S CO
ROS
1.02
C
A
S
POLE
TION
S
A
S
L
1.01
ISO
ACRO
TION
ISOLA
1.00
1.00
0.5
.1
.5
1.0
300
WR)
S (VS
.01
LOAD VOLTAGE (VDC)
RTIO
N
VSWR
dB
0
.1
.2
.3
.4
250
200
150
100
50
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
FREQUENCY (GHz)
LOAD CURRENT (AMPS DC)
FIGURE 1
FIGURE 2
© 2016 TELEDYNE RELAYS
0.8
0.9
(800) 284-7007 • www.teledynerelays.com
1.0
S114 Page 3
S114\032016\Q1
APPENDIX: Spacer Pads
Pad designation and
bottom view dimensions
Height
Ø.150
[3.81]
(REF)
Dim H
MAX
“M4” Pad for TO-5
Dim H
MAX
“M4” Pad for TO-5
Dim H
MAX
“M4” Pad for Centigrid®
.156
[3.96]
(REF)
Dim H
MAX
.256
[6.5]
(REF)
“M9” Pad for Centigrid®
For use with the following:
Dim. H
Max.
ER412, ER412D, ER412DD
.295 (7.49)
712, 712D, 712TN,
RF300, RF310, RF320
RF700, RF703
.300 (7.62)
ER420, ER420D, ER420DD, 421,
ER421D, ER421DD, ER422, ER422D,
ER422DD, 722, 722D, RF341
.305 (7.75)
ER431T, ER432T,
ER432, ER432D, ER432DD
.400 (10.16)
732, 732D, 732TN, RF303, RF313,
RF323
.410 (10.41)
RF312, RF332
SI800, SI803
.350 (8.89)
ER411, ER411D, ER411DD, ER411T
.295 (7.49)
ER431, ER431D, ER431DD
.400 (10.16)
RF311
.300 (7.62)
RF331
.410 (10.41)
172, 172D
.305 (7.75)
ER114, ER114D, ER114DD,
J114, J114D, J114DD
.300 (7.62)
ER134, ER134D, ER134DD,
J134, J134D, J134DD
.400 (10.16)
RF100
.315 (8.00)
RF103
.420 (10.67)
122C, A152
.320 (8.13)
ER116C, J116C
.300 (7.62)
ER136C, J136C
.400 (10.16)
RF180
.325 (8.25)
A150
.305 (7.75)
Notes:
1. Spacer pad material: Polyester film.
2. To specify an “M4” or “M9” spacer pad, refer to the mounting variants portion of the part numbering
example in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise specified, tolerance is ± .010” (.25 mm).
5. Add 10 mΩ to the contact resistance shown in the datasheet.
6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
Page 4
(800) 284-7007 • www.teledynerelays.com • +44 (0) 1236 453124 • www.teledyne-europe.com
© 2016 TELEDYNE RELAYS
APPENDIX: Spreader Pads
Pad designation and
bottom view dimensions
Height
For use with the following:
.370 [9.4]
MAX SQ
.100
[2.54]
Dim H
MAX
.300
[7.62]
.150
[3.81]
.014
[0.36]
(REF)
.100
[2.54]
.370
[9.4]
MIN
.200
[5.08]
“M” Pad 5/ 6/
.390 [9.91]
SQ
.100
[2.54]
.150
[3.81]
.300
[7.62]
.300
[7.62]
.150
[3.81]
Dim H
MAX
.130
[3.3]
“M2” Pad 7/ 8/
.370 [9.4]
MAX SQ
.100
[2.54]
Dim H
MAX
.300
[7.62]
.150
[3.81]
.014
[0.36]
(REF)
.100
[2.54]
.200
[5.08]
“M3” Pad 5/ 6/ 9/
ER411T, J411T, ER412, ER412D
ER412DD, J412, J412D, J412DD
ER412T, J412T
.388 (9.86)
712, 712D, 712TN
.393 (9.99)
ER431T, J431T, ER432, ER432D
ER432DD, J432, J432D, J432DD
ER432T, J432T
.493 (12.52)
732, 732D, 732TN
.503 (12.78)
ER420, J420, ER420D, J420D
ER420DD, J420DD, ER421, J421
ER421D, J421D, ER421DD
J422D, ER422DD, J422DD, 722
.398 (10.11)
ER411T
ER412, ER412D, ER412DD
J412, J412D, J412DD
.100
[2.54]
.370
[9.4]
MIN
Dim. H
Max.
.441 (11.20)
712, 712D
.451 (11.46)
ER421, ER421D, ER421DD
722, 732D
.451 (11.46)
ER431T
ER432, ER432D, ER432DD
.546 (13.87)
732, 732D
.556 (14.12)
ER411, ER411D, ER411DD, ER411TX
ER412X, ER412DX, ER412DDX
ER412TX
.388 (9.86)
712X, 712DX, 712TNX
.393 (9.99)
ER420X, ER420DX, ER420DDX
ER421X, ER421DX, ER421DDX
ER422X, ER422DX
ER422DDX, 722X, 722DDX
.398 (10.11)
ER431, ER431D, ER431DD
ER431TX
ER432X, ER432DX, ER432DDX
ER432TX
.493 (12.52)
732X, 732DX, 732TNX
.503 (12.78)
Notes:
1. Spreader pad material: Diallyl Phthalate.
2. To specify an “M”, “M2” or “M3” spreader pad, refer to the mounting variants portion of the part number example
in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise specified, tolerance is ± .010” (0.25 mm).
5/. Add 25 mΩ to the contact resistance shown in the datasheet.
6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
7/. Add 50 mΩ to the contact resistance shown in the datasheet.
8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet.
9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.)
© 2016 TELEDYNE RELAYS
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 5
APPENDIX: Ground Pin Positions
Ø.200
[Ø5.08]
36°±3°
"Z"
"Z"
POSITION
"X"
POSITION
"Y"
POSITION
Ø.200
[Ø5.08]
"Y"
45°±3°
TO-5 Relays:
TO-5 Relays:
ER411T, ER412, ER412T, ER420, ER421, ER422,
ER431T, ER432, ER432T, 712, 712TN, 400H, 400K,
400V, RF300, RF303, RF341, RF312, RF332, RF310,
RF313, RF320, RF323, SI800, SI803, RF700, RF703
ER411, ER431, RF311, RF331
"Y"
POSITION
.100
[2.54]
.050
[1.27]
POSITION
"Y"
POSITION
"Z"
POSITION
.100
[2.54]
.100
[2.54]
"W"
POSITION
POSITION
"Z"
POSITION
"X"
POSITION
.100
[2.54]
.100
[2.54]
"U"
POSITION
(ER116C and ER136C only)
.100
[2.54]
Centigrid® Relays:
Centigrid® Relays:
RF100, RF103, ER114, ER134, 172
RF180, ER116C, 122C, ER136C
“Z” Position
Loopback Relays:
LB363
“Y” Position
Indicates ground pin position
Indicates glass insulated lead position
Indicates ground pin or lead position
depending on relay type
Page 6
NOTES
1. Terminal views shown
2. Dimensions are in inches (mm)
3. Tolerances: ± .010 (±.25) unless otherwise specified
4. Ground pin positions are within .015 (0.38) dia. of true position
5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref.
6. Lead dia. 0.017 (0.43) nom.
(800) 284-7007 • www.teledynerelays.com • +44 (0) 1236 453124 • www.teledyne-europe.com
© 2016 TELEDYNE RELAYS