OWNER’S GUIDE
®
BL488ANZ
®
®
READ ALL INSTRUCTIONS BEFORE USE
THANK YOU!
Welcome to the Nutri Ninja® with Auto-iQ™ Pro Complete all-purpose,
customisable, everyday kitchen assistant. The Nutri Ninja with Auto-iQ Pro
Complete features pre-programmed settings that take the guesswork out of drink
and meal making. These programs are timed to deliver consistent, delicious
results that finish on their own so all you have to do is press a button and enjoy.
If you should have a question about your Nutri Ninja with Auto-iQ Pro Complete, please
call AU: 1800 890 840 or NZ: 0800 002 999.
REGISTER YOUR PURCHASE:
AU: 01800 890 840
TECHNICAL SPECIFICATIONS:
Voltage:
220-240V~, 50/60Hz
Power:1100W
NZ: 0800 002 999
Ninja® Jar Capacity:
RECORD THIS INFORMATION:
Model Number:���������������������������������������������
Date of Purchase (Keep receipt):
__________________________________________________________
1.4 L
Nutri Ninja® Cup Capacity:650ml
Ninja® Double Wall Stainless
Steel Cup Capacity:650ml
THIS BOOK COVERS MODEL NUMBER:
BL488ANZ 30
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using your Ninja® product. When
using an electrical appliance, basic safety precautions should
always be observed, including the following:
IMPORTANT: This appliance is not intended for use by persons
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children shall not use or play with this appliance. Close
supervision is necessary to keep appliance and cord out of reach
of children during use.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
1
WARNING: Remove utensils prior to processing. Failure to
remove may cause the jar to be damaged or to shatter which
may cause personal injury.
2
CAUTION: Do not blend hot liquids, doing so may cause
excessive pressure build-up, resulting in risk of the user
being burned.
3
CAUTION: We do not recommend grinding in any of our
Nutri Ninja® cups.
4
CAUTION: Remove the Pro Extractor Blades™ Assembly
from the Nutri Ninja cup or Nutri Ninja XL Multi-Serve Jar
upon completion of blending. Do not store ingredients before or
after blending them in the cup or jar with the blade assembly
attached. Some foods may contain active ingredients or
release gases that will expand if left in a sealed container,
resulting in excessive pressure buildup that can pose a risk of
injury. For ingredient storage in the cup or jar, use Sip & Seal
Lid® to cover.
5
WARNING: Extension cords are not recommended for use
with this product.
SAVE THESE INSTRUCTIONS
GMA-102233-EA-014
2
CUSTOMER CARE - NZ: 080 0 0 02 999
CAUTION: ln order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
7IMPORTANT: Attachments are not interchangeable.
8IMPORTANT: Never run the appliance empty.
9IMPORTANT: Make sure that the motor base is plugged in for use.
10IMPORTANT: Make sure that the motor base is unplugged
when not in use.
11To protect against electrical shock, do not submerge the appliance or
allow the power cord to come into contact with water or any other
liquid.
12DO NOT allow the appliance to be used by children. Close attention is
necessary when used near children. This is not a toy.
13Never leave the appliance unattended when in use.
14Turn the appliance off and remove the power cord from the electrical
outlet when not in use, before assembling or disassembling parts,
accessing parts that move while in use, and before cleaning. To
unplug, grasp the plug and pull from the electrical outlet. Never pull
from the power cord.
15DO NOT abuse the power cord. Never carry the appliance by the
power cord or yank it to disconnect from the electrical outlet; to
unplug, grasp the plug, not the cord.
16DO NOT use with damaged cord or plug.
17DO NOT USE if the appliance is not working, after it has been
dropped, dropped into water, damaged, or left outdoors.
18NO SERVICEABLE PARTS. Incorrect re-assembly or repair can cause a
risk of electrical shock or injury to persons when the appliance is used.
19DO NOT let the power cord hang over the edge of a table or counter
or touch hot surfaces such as the stove.
6
FOR HOUSEHOLD USE ONLY
CUS T OME R C A R E - AU: 18 0 0 8 9 0 8 4 0
3
®
®
READ ALL INSTRUCTIONS BEFORE USE
IMPORTANT SAFETY INSTRUCTIONS
20Always use the appliance on a dry, level surface. Make sure the
suction cup feet are wiped clean and no crumbs or residue are on the
bottom of them.
21Keep hands, hair, clothing, and utensils out of container while processing
to reduce the risk of severe injury to persons or damage to the appliance.
A scraper may be used ONLY when the appliance is not running.
22 Avoid contact with moving parts.
23DO NOT attempt to sharpen blade assemblies.
24DO NOT use the appliance if the blade assembly is bent or damaged.
25To reduce risk of injury, never place the blade assembly on the motor
base without the proper container.
26DO NOT operate this appliance on or near any hot surfaces (such as
on a gas or electric burner or in a heated oven).
27The use of attachments or accessories (including canning jars), that
are not recommended or sold by the manufacturer may cause fire,
electric shock, or personal injury.
28DO NOT remove the container from the motor base while the
appliance is running.
29To reduce the risk of injury, NEVER operate the appliance without
the blade assembly installed in a container. DO NOT try to defeat
the interlock mechanism; make sure the blade assembly is properly
installed before operating the appliance.
30DO NOT expose containers to extreme temperature changes.
31DO NOT overfill. Do not exceed "MAX" fill line.
32Max ON time is 60 seconds under 1100W load. If the appliance
overheats, a thermal switch will become activated and shut off
the motor. To reset, unplug the appliance and let it cool down for
approximately 30 minutes before using again.
33To reduce the risk of burns, always allow the appliance to cool before
taking off parts and before cleaning.
34To avoid injury, never attempt to place the Pro Extractor Blades™
Assembly onto the motor base without first assembling the blade
assembly to the Nutri Ninja® Cup.
35THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not
use this appliance for anything other than its intended use. Do not
use outdoors.
36Appliance accessories are NOT intended to be used in the
microwave. DO NOT place the containers (cups, processor bowls, lids,
etc.) in the microwave as it may result in damage to the accessories.
37The maximum power rating is based on the chopping blade
(processor bowl) that drives the greatest power; other recommended
attachments may draw significantly less power or current.
Nutri Ninja Cups
Double Wall
Stainless Steel
Ninja® Cup
650 ml
650 ml
®
Sip &
Seal ™ Lid
Nutri Ninja XL
Multi-Serve Jar
1.4 L
Pro Extractor
Blades™ Assembly
NOTE: Sip & Seal lid and Pro Extractor Blades Assembly
can be used with all Ninja Cups.
ACCESSORIES
Select accessories are
included. Others are
available for purchase.
Motor Base
START
STOP
PULSE
YES
SMOOTH
BOOST
EXTRACT
BLEND
NO
SAVE THESE INSTRUCTIONS
4
CUSTOMER CARE - NZ: 080 0 0 02 999
CUS T OME R C A R E - AU: 18 0 0 8 9 0 8 4 0
5
®
®
ASSEMBLY AND USE
FOR THE NUTRI NINJA®
CUP OR JAR
FEATURES:
• Nutrient & Vitamin Extraction*
• 1100 Watt Motor
• User Interface:
START/STOP
START/STOP is a manual setting that runs at High speed for 60 seconds. This button can be pressed at any time if you wish to stop a program.
fig. 6
SMOOTH BOOST ™
SMOOTH BOOST YES/NO is a special feature available when using the Auto-iQ™ EXTRACT and Auto-iQ BLEND. This setting can be used to control the consistency of your beverage
recipes. Select SMOOTH BOOST YES when smoother, creamier results are desired. This is the default program for both Auto-iQ EXTRACT and Auto-iQ BLEND programs. Select
SMOOTH BOOST NO when more of a textured consistency is desired.
or
or
START
STOP
PULSE
Offers greater control to help prevent over-processing or over-blending. Simply hold down the button and our blades will run at a high speed for a quick burst of power to break through
ice or chop vegetables.
START
STOP
PULSE
YES
SMOOTH
BOOST
EXTRACT
PULSE
YES
BLEND
SMOOTH
BOOST
EXTRACT
START
START
STOP
STOP
BLEND
YES
PULSE
PULSE
YES
SMOOTH
SMOOTH
NO
NO
BOOST
BOOST
NO
BLEND
EXTRACT
EXTRACT BLEND
NO
START
START
STOP
STOP
YES
BOOST
BOOST
NO
START
STOP
PULSE
PULSE
YES
SMOOTH
SMOOTH
BLEND
EXTRACT
EXTRACT BLEND
PULSE
YES
SMOOTH
BOOST
NO
EXTRACT
BLEND
NO
AUTO-IQ EXTRACT *
EXTRACT should be used when blending hard, leafy, or fibrous whole fruits and vegetables, including apples, kale, and celery. This optimized program allows you to blend fresh items
with their skins, seeds, and stems into nutrient extractions. Before using EXTRACT, select SMOOTH BOOST YES or NO depending on your desired consistency.
AUTO-IQ BLEND
BLEND can be used to make a range of beverages that do not include hard or fibrous fresh ingredients, such as milkshakes, protein smoothies, soft fresh-fruit smoothies, and frozen
cocktails. Before using BLEND, select SMOOTH BOOST YES or NO depending on your desired consistency.
fig. 1
fig. 2
fig. 3
ASSEMBLY
fig. 4
USE
fig. 5
fig. 7
REMOVAL
•Sip & Seal lids for drinks on the go.
™
• Nutri Ninja® Cups and Sip & Seal lids, BPA Free, and dishwasher safe.
NOTE: The Stainless Steel Ninja® Cup is NOT dishwasher safe.
• Cord Wrap located on back of the motor base.
Ice to Snow
Crushing Ice to Snow is easy – take ice cubes directly from your freezer, and put in a dry Ninja® Cup – use the pulse feature in short quick bursts until it’s a snow like consistency.
For best results, follow the recipe/ingredient loading instructions found in your Inspiration Guide.
WARNING: Handle the Pro Extractor Blades™ Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.
CAUTION: Remove the Pro Extractor Blades™ Assembly from the Nutri Ninja cup or Nutri Ninja XL Multi-Serve Jar upon completion of blending. Do not store
ingredients before or after blending them in the cup or jar with the blade assembly attached. Some foods may contain active ingredients or release gases that
will expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup or jar, use Sip &
Seal Lid® to cover.
NOTE: Ninja® Auto-iQ™
Technology can sense
which jar is on the motor
base. The function lights
will illuminate depending
on which container is
placed on the motor base.
IMPORTANT: When processing soft
dry ingredients such as day-old
bread or cheese use quick, short 1
second pulses. Do not overfill to avoid
overheating the appliance. Allow the
appliance to cool after each use.
1 Review warning and caution statements
above before proceeding to number 2.
2 Place the motor base on a clean, dry, level
surface such as a counter or tabletop. Press
down on the motor base to make sure that the
suction cups adhere to the counter or tabletop.
3 Add ingredients to the Nutri Ninja cup.
NOTE: Do not overfill! To avoid spilling, do
not add ingredients past the “MAX” fill line.
4 Place the Pro Extractor Blades Assembly
onto the cup and tightly screw it on
clockwise until you have a good seal. (Fig. 1)
*E xtract a nutritious drink containing vitamins and nutrients from fruits and vegetables.
6
CUSTOMER CARE - NZ: 080 0 0 02 999
5 Turn the Nutri Ninja cup upside down and place
it onto the motor base, aligning the tabs on the
cup with the motor base. Rotate the Nutri Ninja
cup clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 2)
6 Once the cup is engaged, the programs
available for that attachment will illuminate.
Select the program desired based on your
recipe. (Fig. 3)
7 To pause the appliance, press the selected
speed or Auto-iQ program a second time.
When the program is paused, the light on the
program button will flash until you press it
again to resume the rest of the program.
8 Once you have reached your desired
consistency, press the START/STOP button
to turn the program off. Turn the Nutri Ninja
cup anticlockwise (Fig. 4) and pull straight
up to remove. (Fig. 5)
9 Turn the cup upright and remove the Pro
Extractor Blades Assembly by twisting the
Pro Extractor Blades Assembly anticlockwise.
CUS T OME R C A R E - AU: 18 0 0 8 9 0 8 4 0
10 Do not store blended contents in the Nutri
Ninja cup or Nutri Ninja XL Multi-Serve Jar
with the Pro Extractor Blades Assembly
attached. (Fig. 6)
11 Place the Sip & Seal™ lid onto the Nutri
Ninja® cup, twist to seal and enjoy!
NOTE: Sip & Seal lid not intended for use
with the Nutri Ninja XL Multi-Serve Jar.
12 For storage in the cup, use Sip & Seal lid to
cover.
13 Make sure that the motor base is unplugged
when not in use.
14 To remove the motor base unit, tip the unit
forward from the rear to easily disengage the
suction cups. (Fig. 7)
15 Be sure to store the Pro Extractor Blades
Assembly attached to an empty cup when
not in use.
7
®
CARE &
MAINTENANCE
CLEANING:
STORING:
CAUTION: Make sure that the motor
base is unplugged from the power
source before inserting or removing any
attachment and before cleaning.
1
1 Separate/remove all parts from each other.
2 Hand Washing: Wash the containers, lids,
blade assemblies and attachments in warm,
soapy water. When washing the blade
assemblies, use a dish-washing utensil with
a handle to avoid direct hand contact with
blades. Handle blade assemblies with care to
avoid contact with sharp edges. Rinse and air
dry thoroughly.
Store the Nutri Ninja with Auto-iQ Pro
Complete upright with the blade assembly
™
inside the corresponding container with the
lid secured on top. Do not place anything on
top. Store the rest of the attachments in a
safe place where they will not be damaged
and won’t cause harm. Secure the power cord
CAUTION: DO NOT immerse the motor
base into water or any other liquid.
®
on the back of the base by wrapping the cord
around the cord wrap.
NOTE: Do not store blended or unblended
ingredients in the Nutri Ninja cup or Nutri
Ninja XL Multi-Serve Jar with the blade
assembly attached.
Dishwasher: The containers, lids, blade
assemblies and attachments are all
dishwasher safe. The lids and blade
assemblies are top rack dishwasher safe.
Ensure that the Blade Assemblies are
removed from the containers before placing
in the dishwasher.
RESETTING THE MOTOR
THERMOSTAT:
The Nutri Ninja with Auto-iQ Pro Complete features
a safety system that prevents damage to the unit’s
motor and drive system should you inadvertently
overload the appliance. If the appliance is
overloaded, the motor will stop. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
TROUBLESHOOTING
GUIDE
Unit doesn’t turn on:
•
Make sure the unit is plugged in and the START/STOP button is pressed.
•Insert and rotate cup clockwise in the base until it clicks into place. When the unit is plugged in and no jar installed, "--" is displayed on the timer.
Unit doesn’t turn off:
•Remove cup from base by rotating cup anticlockwise and lifting out. Display should turn off. Unplug the power cord from the outlet.
Lid/blade assembly hard to assemble:
•Set the cup on a level surface. Place the lid or blade assembly on the top of the cup and align the threads so that the lid/blades sit flat on the cup. Twist clockwise so
that the lid/blades evenly align to the cup until you have a tight seal.
2
Remove and empty the cup and ensure that no
food is jamming the cutting blades.
3
Allow the appliance to cool for approximately
30 minutes.
•Using the Auto-iQ programs is the easiest way to achieve great results. The pulses and pauses allow the food to settle towards the blade. If food is routinely getting
stuck adding some liquid will usually help.
4
Re-install the cup onto the motor base and replug the appliance into the electrical outlet.
•W hen packing the cups, start with fresh items, then add liquids, powders/dry ingredients, and finally frozen items or ice.
5
Proceed with using the appliance as before
while making sure not to exceed the maximum
recommended capacities.
•Make sure the surface as well as the feet of the unit are clean and dry.
Doesn’t mix well, food gets stuck:
Unit moves on the counter while blending:
Unit is difficult to remove from the counter for storage:
•To remove the motor base unit, tip the unit forward from the rear to easily disengage the suction cups.
WARNING: Handle the Blade
Assemblies with care when washing,
as the blades are sharp. Contact
with the blades’ edges can result in
laceration.
3 Wipe the motor base clean with a damp
cloth.
8
NOTE: If the appliance needs servicing,
please call Customer care at: AUST: 1800
890 840 or NZ: 0800 002 999.
CUSTOMER CARE - NZ: 080 0 0 02 999
CUS T OME R C A R E - AU: 18 0 0 8 9 0 8 4 0
9
®
®
NOTES
ONE (1) YEAR LIMITED REPLACEMENT WARRANTY STATEMENT
If your product becomes defective due to faulty material or workmanship within a period of 1 year from the date of purchase, we warrant to do the following:
•
For New Zealand Consumers: We will replace the product with a new product, free of charge, or repair the product at our cost, at our discretion.
•
For Australian Consumers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Your warranty is subject to the following conditions:
•
DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped, damaged or dropped in water. To avoid the risk of electric shock, do not disassemble or attempt
to repair the appliance on your own. If the supply cord is damaged, it must be replaced by a qualified electrician in order to avoid a hazard. Incorrect re-assembly or repair can cause a
risk of electrical shock or injury to persons when the appliance is used.
•The product has not been misused, abused, neglected, altered, modified or repaired by anyone.
•The product has been subjected to fair wear and tear.
•The product has not been used for trade, professional or hire purposes.
•The product has not sustained damage through foreign objects, substances or accident.
Your warranty does not cover:
•Components that are subject to natural wear and tear caused by normal use in accordance with operating instructions.
•Unauthorised/improper maintenance/handling or overload is excluded from this warranty.
•For guarantee claims you will need to submit a proof of purchase in the form of a valid receipt that displays date and place of purchase.
This warranty does not replace but is in addition to your statutory rights.
This warranty does not apply to accessories supplied with the product.
This warranty applies only to the original purchaser and may not be transferred.
Replacement products will be covered by the limited warranty for the balance of the warranty period from the date of the original purchase.
Please note:
Only defective product or parts returned to place of purchase will be replaced under this warranty.
10
CUSTOMER CARE - NZ: 080 0 0 02 999
New Zealand Contact:
Australia Contact
Brand Developers Limited
Brand Developers Aust Pty Ltd
Unit H, 686 Rosebank Road,
Unit 3, 2 Roussos Place,
Avondale, 1026 Auckland, NEW ZEALAND
Truganiana VIC 3029, AUSTRALIA
NZ Customer Care: 0800 002 999
AUST Customer Care: 1800 890 840
CUS T OME R C A R E - AU: 18 0 0 8 9 0 8 4 0
11
Exclusively Distributed
Throughout Australasia by:
Brand Developers Aust Pty Ltd
Unit 3, 2 Roussos Place,
Truganina, VIC 3029, AUSTRALIA
AUST Customer Care: 1800 890 840
Brand Developers Limited
Unit H, 686 Rosebank Road,
Avondale, 1026 Auckland, NEW ZEALAND
NZ Customer Care: 0800 002 999
GMA-102233-EA-014
BL488ANZ_30_160630_1
© 2016 SharkNinja Operating LLC
Illustrations may differ from actual product. We are constantly striving to
improve our products, therefore the specifications contained herein are
subject to change without notice.
Printed in China
Ninja and Nutri-Ninja are registered trademarks of SharkNinja Operating
LLC.
Auto-iQ, Pro Extractor Blades and Sip & Seal are trademarks of
SharkNinja Operating LLC.