Accessories and Equipment for Daily Maintenance Needs

MOPPING EQUIPMENT
FLOOR CARE MAINTENANCE
Accessories and Equipment
for Daily Maintenance Needs
GENERAL CLEANING
CLEANING
GENERAL
RECEPTACLES
320 37th Avenue • St. Charles, IL 60174
1.800.323.2594 • www.unitedlabsinc.com
MATERIAL HANDLING
Accessories and Equipment for Daily Maintenance Needs
Icons Used Throughout This Catalog
FACTORY MUTUAL - FM is an independent testing
agency that approves covered containers based on their
ability to withstand an internal fire by the elimination/reduction of oxygen intake, to remain upright if tilted
and to maintain shape and contain its contents throughout a
specific temperature range. (www.fmglobal.com)
UNDERWRITERS LABORATORY - The UL Classified
Wastebaskets meet the UL performance criteria for open,
non-metallic wastepaper containers and their ability to
contain a fire. (www.ul.com)
USDA - The United States Department of Agriculture sets
regulations for the construction and material of equipment
for use and/or contact with meat poultry and dairy production and the hazards within that process. (www.usda.gov)
HACCP
OSHA- The Occupational Safety and Health Administration
works with employers and employees to create better, safer
and healthier working environments in the United States.
OSHA Sanitation Regulations (Standards - 29 CFR) state
that any receptacle used for putrescribe solid or liquid waste
or refuse shall be so constructed that it does not leak and
may be thoroughly cleaned and maintained in a sanitary
condition. Such a receptacle shall be equipped with a solid,
tight-fitting cover, unless it can be maintained in a sanitary
condition without a cover. (www.osha.gov)
NSF
DERMA-TEK ®- Derma-Tek ® smooth surface, nonporous
design is tough, durable and seamless – making it easy to
clean and keep clean and provides a professional appearance. Plus, Derma-Tek ® will not absorb chemicals, liquids or
odors and will not rust, dent, chip or corrode.
®
HACCP - Hazard Analysis Critical Control Points is a
systematic approach to food safety. This approach utilizes
seven principles and practices for analyzing a food process
and determining the hazards within that process.
(www.nal.usda.gov/fnic/foodborne/haccp/index.shtml)
NSF - National Sanitation Foundation is an independent
testing laboratory that lists products which meet their criteria
for cleanability and sanitation in the areas of food contact
and splash zone. Continental manufactures products that
meet the following NSF Standards: “Standard 2: Food
Equipment” and “Standard 21:Thermoplastic Refuse
Containers”. (www.nsf.org)
CALIFORNIA STATE FIRE MARSHAL - The State of
California is often believed to be the most stringent of all
the United States on their fire codes. Once a product has
obtained UL and/or FM approval, they are submitted to
California for acceptance. (http://www.osfm.fire.ca.gov)
Icons Used Throughout Sections Including Mops, Brooms & Brushes
With so many mops, brushes and brooms to choose from, how do you select the right tool for the job? Wilen has developed a program to make
choosing the best and most efficient product for your particular application quick and easy. Total Quality Cleaning Process or TQCP provides
specific products for specific cleaning environments. Instead of focusing on product categories, TQCP works by identifying the different cleaning
environments and then recommending the right products needed to clean each environment. After all, you wouldn’t use the same mop to
clean a factory and an operating room floor. Now, choosing the right product is easy. With TQCP, you can make smarter decisions about which
products to use. And, by having the right tool for the job, you will gain labor efficiencies and savings as well. To help you identify the right product for your specific
environment, look for the special icons on each page of this catalog.
INDUSTRIAL
COMMERCIAL
Warehouses • Factories • Workshops
Gas Stations • Airports • Maintenance Facilities
Retail Stores • Offices • Malls • Schools
Universities • Churches • Public Facilities
HEALTH CARE
FOOD SERVICE
Hospitals • Laboratories
Nursing Homes • Clinics
Dish & Pot Cleaning • Counter Areas • Sinks & Floors
Equipment Maintenance • Eating Areas
RESILIENT FLOORS
CARPETED AREAS
Sports Facilities • Entrance/Lobby Areas
Office Settings • Retail Stores • Commercial Areas
Theatres/Auditoriums • Entrance/Lobby Areas Office
Settings • Retail Stores • Commercial Areas
M ATER IA L HA N DLING
Platform Trucks
Hand Trucks
Tilt Trucks
Step Stools
Tilt-N-Wheel™
Dunnage Racks
Utility Carts
Shelves
Service / Bussing
Carts
Platform Trucks
PLATFORM TRUCKS
Structural plastic construction and rounded corners protect against accidental wall and door
damage. No bumpers required. Plastic construction will not rust, dent, crack, chip, peel or
splinter unlike conventional metal or wood. All platform trucks come in charcoal grey and
feature a heavy-duty, reinforced steel handle.
Brand
CMC
CMC
CMC
CMC
CMC
CMC
Item
Number
5860
5865
5870
5875
5880
5885
Item
Utility
Standard
Heavy-Duty
Utility
Standard
Heavy-Duty
Capacity
700 lbs.
1,200 lbs.
2,200 lbs.
700 lbs.
1,200 lbs.
2,200 lbs.
Caster
Size
5"
6"
8"
5"
6"
8"
Deck
Size
24" x 48"
24" x 48"
24" x 48"
30" x 60"
30" x 60"
30" x 60"
Pack
Case
1
1
1
1
1
1
Case
Weight
68.06 lbs.
75.50 lbs.
78.88 lbs.
72.56 lbs.
80.00 lbs.
83.38 lbs.
Case
Cube
6.420
7.170
8.500
10.030
11.200
13.280
Tilt Trucks
5/8 CUBIC YARD TILT TRUCKS
All models feature one-piece extra strong seamless industrial plastic construction. Inset wheel
placement prevents wall/door damage and allows for nesting in shipment and in storage. Fits
through standard office doorways. Optional domed, center-hinged lid helps to contain odors
and keep pests out. Stainless steel piano hinge will not rust.
Brand
CMC
CMC
CMC
Item
Number
5839BK
5840BK
5845BK
Item
Utility
Standard
Heavy-Duty
CMC
5843BK
Fits all 5/8 cu. yd. tilt trucks
Capacity
300 lbs.
750 lbs.
1,200 lbs.
Color
Black
Black
Black
Pack
Case
1
1
1
Black
1
Case
Cube
43.110
43.110
43.110
TILT TRUCK COVER
5840 Shown w/ 5843 Lid
82
Case
Weight
59.00 lbs.
79.00 lbs.
81.00 lbs.
22.52 lbs.
8.640
M AT E R I A L H A N D L I N G
1.1 CUBIC YARD TILT TRUCKS
All models are equipped with deluxe roller bearing wheels and heavy-duty casters. Wheels are
inset to fit standard office doorways and to reduce wall and door damage. This Tilt Truck is
easily handled by one person and can be easily cleaned with steam or high pressure hot water.
Optional domed, center-hinged lid helps to contain odors and keep pests out. Stainless steel
piano hinge will not rust.
Brand
CMC
CMC
Item
Number
5833BK
5835BK
Item
Standard
Heavy-Duty
Capacity
800 lbs.
2,000 lbs.
Color
Black
Black
Pack
Case
1
1
Case
Weight
98.00 lbs.
151.00 lbs.
Case
Cube
55.280
55.280
Black
1
22.52 lbs.
8.640
TILT TRUCK COVER
CMC
5837BK
Fits all 1.1 cu. yd. tilt trucks
5835 Shown w/ 5837 Lid
1.5 CUBIC YARD TILT TRUCKS
All models are equipped with deluxe roller bearing wheels and heavy-duty casters. This Tilt
truck is easily handled by one person and is ideal for industrial/commercial applications.
Optional domed, center-hinged lid helps to contain odors and keep pests out. Stainless steel
piano hinge will not rust.
Brand
CMC
CMC
Item
Number
5849BK
5852BK
Item
Standard
Heavy-Duty
Capacity
1,200 lbs.
2,100 lbs.
Color
Black
Black
Pack
Case
1
1
Black
1
Case
Case
Weight
Cube
202.00 lbs. 102.380
206.00 lbs. 102.380
TILT TRUCK COVER
CMC
5853BK
Fits all 1.5 cu. yd. tilt trucks
32.00 lbs.
18.300
5849 Shown w/ 5853 Lid
Tilt-N-Wheel™
TILT-N-WHEEL™
These 50 gallon containers have a hinged, double walled lid with standard 8" non-marking
wheels.
Brand
CMC
CMC
Item
Number
5850BK
5850YW
Capacity
50 gal.
50 gal.
Color
Black
Yellow
Pack
Case
2
2
Case
Weight
56.00 lbs.
56.00 lbs.
Case
Cube
18.540
18.540
Utility Carts
PNEUMATIC UTILITY CART
The heavy-duty plastic construction is lightweight and durable, and is designed to handle applications from health care to industrial. The 8" fully pneumatic casters and all plastic design provide a cushioned, quiet ride that is ideal for transporting fragile items over rough surfaces.
Derma-Tek® smooth skin, non-porous finish is easy to clean and provides a professional
appearance that will not peel, chip, crack or fade like conventional metal units. Supports 200
lbs. per shelf, 400 lbs. maximum capacity. Compatible with 5806 Optional Center Shelf, found
on page 110.
Brand
CMC
CMC
Item
Number
5805BE-PN
5805GY-PN
Size
40 3/8" x 25 1/2" x 37"
40 3/8" x 25 1/2" x 37"
Color
Beige
Grey
Pack
Case
1
1
Case
Weight
72.15 lbs.
72.15 lbs.
Case
Cube
5.860
5.860
83
M AT E R I A L H A N D L I N G
UTILITY CART
The 5800 and 5805 two shelf Utility Carts feature 5" heavy-duty, non-marking grey casters
for industrial use. Supports 200 lbs. per shelf, 400 lbs. maximum capacity.
Optional center shelf available.
Brand
CMC
CMC
CMC
CMC
Item
Number
5800BE
5800GY
5805BE
5805GY
Size
34 3/8" x 17 1/2" x 33"
34 3/8" x 17 1/2" x 33"
40 3/8" x 25 1/2" x 33"
40 3/8" x 25 1/2" x 33"
Color
Beige
Grey
Beige
Grey
Pack
Case
1
1
1
1
Case
Weight
32.90 lbs.
32.90 lbs.
42.60 lbs.
42.60 lbs.
Case
Cube
3.440
3.440
5.860
5.860
OPTIONAL CENTER SHELF
CMC
CMC
CMC
CMC
5801BE
5801GY
5806BE
5806GY
Fits all #5800 Carts
Fits all #5800 Carts
Fits all #5805 Carts
Fits all #5805 Carts
Beige
Grey
Beige
Grey
1
1
1
1
10.40 lbs.
10.40 lbs.
16.50 lbs.
16.50 lbs.
1.470
1.470
2.590
2.590
5805 shown w/ 5806,
Optional Center Shelf.
Service/Bussing Carts
SERVICE / BUSSING CARTS
Three shelf cart features 4" heavy-duty, non-marking grey casters. Applications range from
industrial use to food service and bussing. Supports 200 lbs. per shelf, 400 lbs. maximum
capacity. Accepts, without tools, the 5811 and 5812 silverware and refuse bins
Brand
CMC
CMC
84
Rev. 211
Item
Number
5810BE
5810BK
Size
311/4" x 16 1/4" x 36 3/8"
311/4" x 16 1/4" x 36 3/8"
Color
Beige
Black
Pack
Case
1
1
Case
Weight
24.33 lbs.
24.33 lbs.
Case
Cube
4.340
4.340
M AT E R I A L H A N D L I N G
Hand Trucks
DELUXE STEEL HAND TRUCK
Handles cartons or drums up to 55 gallons. Blue enamel finish is rust and corrosion resistant.
Large, 10" x 2 3 ⁄ 4", solid wheels for durability.
Brand
CMC
Item
Number
43
Pack
Case
1
Color
Blue Enamel Finish
Case
Weight
36.13 lbs.
Case
Cube
7.370
Step Stool
PLASTIC STEP STOOL
This structural plastic step stool is rugged enough to hold up to 350 lbs. The molded-in no-slip
surface prevents falls. Four retractable, non-marking casters and an anti-skid bottom makes it
easy to maneuver and hold it in place during use.
Brand
CMC
CMC
Item
Number
523BK
523TN
Pack
Case
1
1
Color
Black
Tan
Case
Weight
8.30 lbs.
8.30 lbs.
Case
Cube
1.310
1.310
Dunnage Racks
DUNNAGE RACK
These racks are the best solution for your storage needs. Made of durable polyethylene
construction, these units won’t rust, dent, chip or corrode like metal units. The light textured
surface is easy to wipe-off or steam clean. The Dunnage-Key connector storage slot allows for
storage when not in use and is sloped to allow for drainage when cleaning. Ventilation slots
allow air to circulate under stored goods, promoting longer shelf life. Racks can be joined
together in end-to-end, back-to-back or in a L or U shape, to accommodate all storage needs.
12" height meets NSF®, FDA and USDA requirements and meets food codes and H.A.C.C.P.’s
food storage requirements. Two keys are furnished with each rack. Additional keys available.
Brand
CMC
CMC
CMC
CMC
Item
Number
5930
5936
5948
5960
Size
30" x 22" x 12"
36" x 22" x 12"
48" x 22" x 12"
60" x 22" x 12"
Load
Capacity
1,500 lbs.
1,500 lbs.
3,000 lbs.
3,000 lbs.
Color
Grey
Grey
Grey
Grey
Pack
Case
1
1
1
1
Case
Weight
16.00 lbs.
19.50 lbs.
29.50 lbs.
32.50 lbs.
Case
Cube
4.950
5.920
7.810
9.740
N/A
Yellow
6
0.28 lbs.
0.010
NSF
®
DUNNAGE RACK KEY
CMC
5906
N/A
85
M AT E R I A L H A N D L I N G
Shelves
STRUCTO TUFF™ SHELVES
Structo Tuff™ Shelves are ideal for commercial use with chemical dispensing jugs, office
supplies and other items in warehouses, offices and janitor closets. Fast, easy assembly without
tools. Holds up to 250 lbs. per shelf.
Brand
CMC
Item
Number
4418-5GY
Size
40" x 18" x 72"
Color
Charcoal Grey
Pack
Case
1
Case
Weight
71.00 lbs.
Case
Cube
7.580
VENTILATED STORAGE SHELF
Ventilated Storage Shelf design allows for a moisture and dust free storage environment for all
your supplies. “Quick Assembly” socket and column system - no tools needed. Holds up to
150 lbs. per shelf.
Brand
CMC
Item
Number
6484OY
Size
36 1/4" x 18 1/8" x 54 1/4"
Color
Oyster
Pack
Case
1
Case
Weight
24.66 lbs.
Case
Cube
4.220
NSF® VENTILATED STORAGE SHELF
Ventilated Storage Shelf design allows for a moisture and dust free storage environment for
all your supplies with base leveling feet. NSF® listed. Holds up to 150 lbs. per shelf. Includes
practical 6" leveling feet for cleaning and stability.
Brand
CMC
NSF
®
86
Item
Number
6485OY
Size
36 1/4" x 18 1/8" x 60 1/4"
Color
Oyster
Pack
Case
1
Case
Weight
27.06 lbs.
Case
Cube
4.220