Kelvinator - MKEL (1100127171) Convert

Part Code : 1100127171
OWNER'S MANUAL
Please read this instruction manual carefully before operating your machine. Retain it for future reference.
Record model name & serial number of the machine. Please quote this information when you require service.
COVER 4
COVER 1
COVER 3
The primary concerns that drive our efforts to design and develop quality products are your Health
and Pleasure. This is one such washing machine that has been designed specially with advanced
features for your convenience, to provide brightest and hygienic wash in an effortless way. So go
ahead and enjoy the pleasure of KELVINATOR Washing Machine at your service.
=
RUST FREE*
This machine is made of Hi Impact Polymer Fiber which is rust free. This gives your machine a
longer life.
=
UNIQUE AUTO SOAK**
A specially designed soak system for better soaking
Soaking is an important element of the washing process. It enhances and optimizes the detergent’s
action on the clothes. With this washing machine you can forget about soaking the clothes
manually. Just put your clothes in the machine, add water and detergent, the rest will be taken care
of by the Unique Auto Soak feature. The Unique Auto Soak option provides you the benefit of an
ideal soak, which is better than the manual soak. It supplements soaking with intermittent agitation
to ensure that all your clothes receive uniform soaking and better detergent action.
=
UNIQUE SPIN FOUNTAIN
When the washed clothes are transferred into the spin tub, there are chances of the detergent still
remaining in the clothes. This washing machine has a special inlet in the spin tub through which
water is showered onto your clothes. This ensures that any traces of detergent left on the clothes
are removed before drying.
Contents
Page No.
Description of Parts
2
Description of Control Panel
3
Safety Precautions
4
How to install
5
How to wash
5
Auto Soak
6
Spin Shower
6
How to Spin
7
Care and Maintenance
8
Trouble Shooting
8
* Not applicable for KSA-651P / KS-6511 / KS-7021
** Not applicable for KS-6011
Description of Parts
9
9
1. Control Panel of Machine
2. Inlet Hose
3. Water Inlet Selector
1
4. Wash Tub Lid
5. Wash Tub
3
6. Overflow Filter
7. Pulsator
4
8. Spinner Lid
9. Inner Lid
10. Drain Hose Hanger
5
11. Spinner Tub
12. Power cord
13. Drain Hose
6
14. Spinner Cap
7
11
12
12
14
14
15
16
16
14
2
8
9
10
11
12
13
17
(Please do not match this figure with your machine as it may be different from your model.
These are schematic diagrams only).
1
2
Safety Precautions
Parts Identification
CONTROL PANEL
3
2
4
1
Do not use Washing Machine to wash items
other than Clothes, Blankets, Curtains, Towels,
etc.
Never disassemble, Repair or Remodel this
washing machine. This can cause fire
or irregular action that may Result in injury
5
KSA-601P
KS-6011
KS-6012
KS-7362
KS-7363
1
3
2
Consult your nearest service centre for repair
Install the washing machine on
sturdy floor of which maximum
permissible inclination is 2
degree.
1
KSA-681P
KS-7011
KS-6851
KS-7251
KS-7052
KS-7252
KS-7253
KS-7361
5
AIN
DR
KSA-651P
KS-6511
KS-7021
4
2
3
4
5
When the washing machine gets dirty, wipe it
with the slightly wet cloth.
If machine is installed on Carpet,
be sure that Carpet does not
block any openings.
1
2
3
4
5
KS-7364
1. Water Inlet
: This is used to direct water supply to wash tub for washing
or spin tub for spin shower.
2. Wash Timer
: This timer is used for Auto SOAK, WASH and RINSE operations.
Following combination can be selected.
A) Auto Soak + Wash :- Select the desire soak time by setting the
Timer between 15 ~ 35 min., 15~40 min.
B) Wash/Rinse :- You can select any Wash/Rinse time up to 15min. if
you want Wash/Rinse time for shorter duration turn the knob up to
10min. position and then turn it back to desired position.
(Note : Auto Soak not applicable for KS-6011 Model)
3. Wash Selector
: Set the knob to ‘HEAVY’, ‘GENTLE’ according to kinds and
quantity of the laundry.
( ‘GENTLE’, ‘NORMAL’, ‘HEAVY’ for
KSA-601P, KS-6011, KS-6012, KS-7362, KS-7363).
( ‘GENTLE’, ‘NORMAL’, ‘HEAVY’, 'POWER WASH' applicable for KS-7364)
4. Drain Selector
: This selector is to set for “WASH/RINSE” or “DRAIN” the water from
wash tub.
- WASH / RINSE for wash & rinse program.
- DRAIN for draining the water from the wash tub.
5. Spin Timer
: This timer is used to select your desired length of time to spin laundry by
using 5/10 minutes timer. (if you want to set the timer to 2 min. or less, turn
the selector up to the 5/10 min. position, and then turn it back to the desired
position.
for washing clothes.
It is recommanded to drain all the water from
wash tub if any, after completion of your wash
cycle.
Please do not put your
hands under the
machine, as there is
a rotating mechanism.
NOTE :
“This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.”
Note : Do not rotate the knobs more then prescribed limits.
Note : Due to continues R&D, the above specification may change without any prior notice.
3
4
Table 1: Detergent Guide
How to Install
WASH LOAD
1) Install the Washing machine in a well-ventilated, safe place. Machine should
be put on flat ground and where can you connect the power supply. It is
recommended to place the washing machine on a leveled floor and avoid a place
where the washing machine can be exposed to direct sunlight.
2) Insert the power plug firmly into the main power supply.
3) Water supply in the inlet hose can be adjusted to Wash Tub or Spin Tub.
4) The feeding water indicator When the water spills out of the hole above the label, it means too much water
has been supplied. Adjust the water tap.
5) Pull out the drain hose from the washing machine. When using the machine for
the first time, you may find water remaining in the drain hose. It was used for the
factory performance test. It does not imply any malfunction.
2.5~3.8 Kg
3.8~5.0 Kg
MIN.
1.2 Kg
LOW
Medium
High
Over Flow
Amount of Detergent
25 gm
40 gm
50 gm
60 gm
64 gm
Amount of concentrate Detergent
16 gm
25 gm
30 gm
38 gm
40 gm
Amount of Softener
17 ml
22 ml
26 ml
29 ml
35 ml
Water Level
1.2~2.5 Kg
Note : Actual quantities of load may very depending on the material size of laundry items.
Note : If movement of cloth is too slow, remove some of the cloth until a steady movement is observed.
Table 2: Laundry Guide
Amount of Laundry
Less than 1.2 kg
System
Clothes
Synthetic Fiber
Cotton
Washing Time
2 minutes
2-5 minutes
7-10 minutes
GENTLE
GENTLE*/NORMAL
HEAVY / POWER WASH
Washing Time
2-5 minutes
Wash Selector
GENTLE
Washing Time
7-10 minutes
GENTLE*/NORMAL
7-10 minutes
10-15 minutes
GENTLE
GENTLE*/NORMAL
2.5 ~ 3.8 kg
Wash Selector
back cover D. V. Case
drain hose
Heavy Stained
Clothes
Wash Selector
1.2 ~ 2.5 kg
Fixing the Drain Hose
1. From the Wash tub take the Drain Hose with
the Clamp fitted on it.
2. Push the drain hose onto the D.V. Case.
3. Now, press the clamp in the direction of
the arrows as shown in Fig 4.Push them
inwards so that they fit tightly on the
D.V. case.
5.0 Kg or ABOVE
clamp
Washing Time
3.8 kg and above
Wash Selector
Soak 20 minutes
Wash 10-15 minutes
GENTLE
Soak 20 minutes
Wash 15 minutes
GENTLE*/NORMAL
#
10-15 minutes
HEAVY / POWER WASH
#
# Soak 20~25 minutes
Wash 15 minutes
HEAVY / POWER WASH
#
# Soak 20~25 minutes
Wash 15 minutes
HEAVY / POWER WASH
#
* Not Applicable For KSA-601P / KS-6011 / KS 6012 / KS-7362 / KS-7363 .
(Applicable for KSA-651P/KS-6511/KS-7021)
Preparation for Washing
(Note : Auto Soak not applicable for KS-6011 Model)
# Applicable for KS-7364 Model only
RINSING :
1.
2.
3.
4.
5.
The machine should be put on Flat Ground.
Ensure Three Core Power Plug seat must have Ground Connection.
Lay down the Drain Hose.
Connect the water Inlet Hose to Water Tap.
Remove objects like coins, pins etc., from clothes before washing. They may damage your clothes
and clog the drain system.
6. According to the weight of cloth, adjust the level of water.
7. Switch ON power.
1. Fill the water up to desired level depending on cloth load.
2. Set WASH TIMER to 5 ~ 10 min. position to RINSE.
3. When you finish rinsing, drain off the water from the tub by turning the knob to “DRAIN” position.
Transfer clothes to Spin Tub for Spinning.
Auto Soak
position,
until the 15th minute
regular wash or soak function, turn
How to Wash
knob to “WASH / RINSE”.
the knob to your desired period of time.
according to the weight of cloth (Refer table 1 and 2).
in the tub. (Refer table 1 and 2).
4. Put recommendable quantity of detergent as mentioned in Table 1.
“GENTLE or HEAVY”.
(GENTLE, NORMAL, HEAVY for KSA-601P, KS-6011, KS-6012, KS-7362, KS-7363).
( ‘GENTLE’, ‘NORMAL’, ‘HEAVY’, 'POWER WASH' applicable for KS-7364)
6. Set Wash Time upto 15min, depending on your cloth load & type (Refer Table 2).
For Auto Soaking, set time between 15~35 min / 15~40min.
knob to “DRAIN” position.
knob switch to “WASH / RINSE” position.
Fill the water up to the desired level for rinsing.
(Note : Auto Soak not applicable for KS-6011 Model)
Spin Shower Rinsing
With spin shower, the remaining detergent in the clothes will be removed and you can save on additional
rinsing time and water. (However, if water from the tap contains rust and / or dirt, do not perform spin shower.)
Direct water to spin tub by turning knob / lever.
2. While SPIN TIMER is at "0" (zero) position (spin tub not rotating), turn on the tap for about 1 minute.
3. Turn OFF the tap and then spin for about 1 ~ 5 minutes.
Note: Water level may be less than the water level line while washing. If so, refill the water. Be careful
not to exceed the indicated water level line; it may cause water to spill out of the tub.
5
6
Care and Maintenance
How to Spin
Be sure to remove the power plug from main power supply before cleaning the machine and filter
SPINNING :Put the laundry into the spinner tub by putting the small-sized laundry in the bottom area to keep
the balance of the tub. (figure 1)
Place the SPINNER CAP in the tub as shown in the figure 2.
Close firmly the inner and outer lids of the spinner tub.
Select the spin time to 2 - 5 min., 2 - 10 min.
1. Pull out the Lint Filter from the lock, use fingers to
press & pull out at the part of the Lint Filters side. (Fig. 1)
2. Rinse the dirt from the Lint Filter with water (Fig. 2)
3. Set back to the original position, insert the
bottom first as shown press down and lock
as the arrow. (Fig. 3)
Note : It is recommended to clean the Lint Filter regularly.
SPINNING TIME FOR LAUNDRY :-
(Applicable for selected models only.)
1. Cotton clothes : 5 min.
2. Delicate clothes (Thin synthetic fiber, sarees etc.) : 2 min.
3. Sweater (Synthetic fiber) : 2 ~ 3 min.
4. Underwear (Knitting clothes) : 3 ~ 5 min.
#
5. Heavy Clothes (Bed Sheet, Towel etc.) : 0-5 min / 5-10 min .
# Applicable for selected model only.
Fig. 1
Spinner cap
Fig.1
Fig.2
Fig.3
Fig.4
Fig. 2
HINTS FOR SPINNING :-
Trouble Shooting
If there is a sound from the spinner, open the spinner lid then try to lay the laundry evenly.
If the lid is open while the spinning function is working, the machine will stop within 5 ~ 10
IF ANY ABNORMALITY IS FOUND, CHECK THE FOLLOWING BEFORE CALLING FOR SERVICE CENTER
seconds. If it is still running, contact service center.
If the spinner lid is not closed, the machine will not work even the timing is set.
1.
2.
3.
4.
In case of the laundry falling from the spinner tub
Inner Lid
Remove the power plug from main power supply.
Open the INNER LID and OUTER TUB COVER
Is the POWER PLUG inserted firmly or POWER PLUG disconnected ?
Is the WASH / SPIN TIMER switch turned to "OFF" position ?
Is the SPIN LID closed properly ?
Is there any laundry fallen out from the SPIN TUB ?
If all the above points have been checked and no abnormality is found but the machine still works
improperly, please contact the nearest SERVICE CENTER.
Pick up the laundry
While placing the OUTER TUB COVER back, be sure
to push it firmly until front hook is engaged securely.
Outer Tub
Cover
Hook
Final step
Empty the spin tub, then turn the drain selector knob to ‘DRAIN’ to discharge the
washing water and turn the knob to ‘WASH/RINSE’ when water is completely drain out.
Then remove power plug from main power supply.
7
8
3
2
4
1
5
KSA-601P
KS-6011
KS-6012
KS-7362
KS-7363
1
3
2
AIN
1
KSA-681P
KS-7011
KS-6851
KS-7251
KS-7052
KS-7252
KS-7253
KS-7361
5
DR
KSA-651P
KS-6511
KS-7021
4
1
2
2
3
3
4
4
5
5
KS-7364
9
10
11
13
14
SPECIFICATION
KSA-601P KSA-681P
KS-6012
KS-7011
KS-6011
MODEL :
Power Supply
A.
B.
KS-7021
KS-6851 KS-7251
KS-7052
KS-7252
KS-7253
KS-7361
KS-7362
KS-7363
KS-7364
Washing Capacity
6.0 kg
230V, 50 Hz AC
7.0 kg
6.8 / 7.0 kg
6.8 kg
7.0/7.2 kg
7.3 kg
Water Level Max.
(Liters)
Min.
60
60
55
60
60
60
30
29
37
29
29
29
Rated Power Wash
Consumption Spin
340 W
180 W
350 W
180 W
350 W
180 W
350 W
180 W
350 W
180 W
360 W
180 W
Weight of
the Machine
22.5 kg
23.0 kg
28.0 kg
23.0 kg
23.0 kg
23.0 kg
780
480
743
465
790
500
790
500
780
480
960
Length 750
Overall
Dimensions Width 435
(in mm)
Height 890
Timing
960
943
975
975
Wash
15 Min
15 Min
15 Min
15 Min
15 Min
15 Min
Soak
20 Min*
20 Min
20 Min
20 Min*
20 Min*
20~25Min*
1. As per Standard Testing Condition.
2. **Due to continues R&D, the above specification may change without
any prior notice.
3. * Soak Not available in KS-6011.
15
16
12. The warranty does not cover any accessories external to the system.
WARRANTY TERMS AND CONDITIONS
FILL AND DESPATCH WARRANTY CARD ELSE THE WARRANTY VOIDS
Manufacturer of this KELVINATOR Brand Washing Machine undertake that the product is
warranted against manufacturing defects for a period of 24 months, commencing from the
date of purchase, the manufacturer will repair or replace free of charge any part or
parts of the Washing Machine except Top Lids, Inlet/Drain Hose and lint Filter, should
the manufacturer be fully satisfied, in its sole discretion, that the defect/s is/are due to faulty
material or workmanship only. The warranty will be governed by the following clauses :
1.
This warranty is confined to the original products of the manufacturer only.
2.
The manufacturer or their authorised service Agent / will repair / replace all parts failing
due to faulty material or defective workmanship pertaining to the above Washing Machine.
Only the manufacturer or its authorised Service Agent / can service/repair/attend to
install/reinstall the washing Machine. The list of manufacturer's serivce centre is as
printed overleaf.
3.
4.
5.
6.
7.
8.
9.
If the machine is not repairable at the place of its installation then the decision of
technician to call back the machine to Service Centre for repairs shall be final. In such
cases it is the responsibility of Purchaser to bring the machine to the Service Centre.
For the units installed beyond the municipal limits of the jurisdiction of the authorised
service a manufacturer's authorized service station or the dealers of KELVINATOR as well
as expenses incurred in connection with deputing of service personnel/technicians
towards to and fro travel conveyance with deputing of service incidentials etc. will be
borne by the customer.
Any change of location of the unit and / or change of ownership has to be done in
consultation with KELVINATOR or its authorised service agent so that the warranty
obligation for the remaining part of the warranty could be transferred to the new owners
or the original purchaser but at the new location. The unit so transferred will be inspected
by KELVINATOR or its service agent at the cost inspection charges.
Any damage caused during shifting will be repaired on chargeable basis. In the event of
repair / replacement of any part/s of the set, this warranty will thereafter, continue and
remain in force only for the unexpired period as per the warranty card issued at the time
of purchase of the set. Moreover, the time taken for repair and in transit, whether under
the warranty or otherwise, shall not be excluded from the warranty period.
This warranty will continue to be in force for the term herein specified, irrespective of
what replaced may be provided under it, and such replacement shall not attract any
fresh warranty unless specified.
The warranty extended herein is in lieu of all implied conditions and warranties under the
law and is confined to the repair or replacement of defective parts and does not cover
any consequential or resulting liability, damage or loss arising from such defects.
Furthermore, the warranty in no case, shall extend to the payment or any monetary
consideration whatsoever of the replacement or return of the Washing Machine as a
whole.
13. The manufacturer obligation under this warranty shall be limited to repairing or
providing replacement of parts, which are found to be defective within warranty period.
14. Any defects in electrical installation on fittings outside Washing Machine shall have to
be rectified by the purchaser only.
15. The manufacturer shall not be liable for any delay in rectifying the machine, in the
event of non-availability of components and shall in no way be responsible for any
losses, direct or indirect, arising out of the delay, if any.
16. The parts like Lids, Panels, Body and accessories will not carry any warranty unless
there is a manufacturing defect observed.
17. Warranty shall stand ceased / cancelled if the machine is used for any type of
commercial purpose.
18. The manufacturer is not responsible for any breakage or non - performance or delay
in providing service due to strike, industrial/labour dispute, fire, accident, damage,
restriction imposed by Government, Act of God, riot, war, etc. which are beyond the
control of the manufacturer.
19. The warranty is issued subject to the jurisdiction of Aurangabad Court of law.
THIS WARRANTY IS NOT APPLICABLE IN ANY OF THE
FOLLOWING CASES
1.
The warranty card is not duly filled and mailed back to the service centre for
registration by the purchaser, within 10 days of purchase.
2.
The completed Warranty card is not presented to the manufacturer technician at
the time of repair.
3.
The machine is not used according to the instruction given in owner’s guide.
4.
Defects caused by improper use as determined by the manufacturer personnel.
5.
Any repair work/installation is carried out by the person other than authorized service
centre/service agent.
6.
Site (premises where the product is kept) conditions that do not conform to the
recommended operating conditions of the machine.
7.
The serial number is deleted, defaced or altered.
8.
If the electrical power supply voltages, are not within the stipulated norms.
9.
Any defects arising out of lightning, abnormal voltage, fire, accident, any acts of
God or other circumstances beyond the control of the manufacturer while the machine
is in transit or otherwise.
10. Defects caused by household pets, Rats, Cockroaches or any other animals or insects.
For any doubts or clarifications please contact us on-
10. The defective spare part/s shall be the sole property of manufacturer and will be
collected by the Authorised Service Centre / Franchisee.
11. It shall be the discretion of the manufacturer to replace the required part with suitable
and currently available part/s. The manufacturer may also use the substitute part for
defective part.
17
WEB : www.kelvinator.co.in
18
CUSTOMER COPY
Service Registration at -
Customer Name :
Customer Address :
Tel No. :
Dealer Bill Date :
Dealer Name :
Bill No. :
Dealer Address :
Set Serial No. :
Tel No. :
Model No. :
DOP :
I accept the terms and conditions of warranty.
Dealer sign & seal
Customer sign
CUT HERE
Web : www.kelvinator.co.in
SERVICE CENTER COPY
Service Registration at -
Customer Name :
Customer Address :
Tel No. :
Dealer Bill Date :
Dealer Name :
Bill No. :
Dealer Address :
Set Serial No. :
Tel No. :
Model No. :
DOP :
I accept the terms and conditions of warranty.
Dealer sign & seal
Customer sign
CUT HERE
CSO AURANGABAD COPY
Customer Name :
Service Registration at -
Customer Address :
Tel No. :
Dealer Name :
Dealer Address :
Dealer Bill Date :
Bill No. :
Set Serial No. :
Tel No. :
Model No. :
DOP :
I accept the terms and conditions of warranty.
Dealer sign & seal
Customer sign
This card stands null and void if the Service Center copy of Warranty Card is not dispatched within 10
days of date of purchase (DOP) and duly signed by Authorized Dealer on date of purchase.
Note : The after sale service shall be subject to the production of this card at the time of each servicing, either at
the place of the customer or at any service center. In absence of this card, the company shall not be liable
to provide after sale service as per the warranty norms.
19
20
Download PDF
Similar pages
MLTU16FGAWB
Print Specs
10311 tuv english
TOP LOAD WASHERS IL A ET
MLTU14GGAWB
MLTU16GGAWB
Tech Spec (PDF format, 80 kBytes)
MLTU12GGAWB