AV Connectivity, Distribution And Beyond...
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
2 Port DVI Splitter
P
Model #: SPLIT-DVI-2
© 2013 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Product Application & Market Sectors
Corporate
House Of Worship
Military
Residential
Education
Industrial
Medical
Aviation
www.avenview.com
TABLE OF CONTENTS
1.
GETTING STARTED...........................................................................................................................1
1.1 Important Safeguards...............................................................................................................1
1.2 Safety Instructions...................................................................................................................1
1.3 Regulatory Notices Federal Communications Commission (FCC)............................ 2
2.Introduction...............................................................................................................................3
2.1Package Contents......................................................................................................................3
2.2 Before Installation....................................................................................................................4
2.3Panel Description........................................................................................................................6
2.3.1 Front Panel..................................................................................................................................6
2.3.2 Rear Panel...................................................................................................................................6
3.Installation...................................................................................................................................6
4.Specifications................................................................................................................................7
5.
Supported Resolutions.............................................................................................................8
6.
Connector pin assignments..................................................................................................9
6.1 TRANSMITTER (OUTPUT)..........................................................................................................9
6.2 RECEIVER (INPUT).......................................................................................................................9
7.
General Troubleshooting....................................................................................................10
www.avenview.com
Page
3
1. GETTING STARTED
SECTION 1: GETTING STARTED
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•• Any product, on which the serial number has been defaced, modified or removed.
•• Damage, deterioration or malfunction resulting from:
•• Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•• Repair or attempted repair by anyone not authorized by us.
•• Any damage of the product due to shipment.
•• Removal or installation of the product.
•• Causes external to the product, such as electric power fluctuation or failure.
•• Use of supplies or parts not meeting our specifications.
•• Normal wear and tear.
•• Any other causes which does not relate to a product defect.
•• Removal, installation, and set-up service charges.
1.2 Safety Instructions
The Avenview SPLIT-DVI-2, 2 Port DVI Splitter, has been tested for conformance to safety regulations and requirements, and
has been certified for international use. However, like all electronic equipment’s, the SPLIT-DVI-2 should be used with care.
Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
! Do not dismantle the housing or modify the module.
! Dismantling the housing or modifying the module may result in electrical shock or burn.
! Refer all servicing to qualified service personnel.
! Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
! Keep the module away from liquids.
! Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
! Have the module checked by a qualified service engineer before using it again.
! Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
www.avenview.com
Page
1
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols
Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL
VOID THE WARRANTY AND CONTINUED USE OF THE
PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
www.avenview.com
Page
2
2.Introduction
Avenview SPLIT-DVI-2 Distribution System is designed to input your digital video signal example (Set-Top boxes, DVD Player or
PC) into DVI input port and distribute the video signal to two digital displays such as PC Monitor, HDTV, LCD, LED or Projector.
-- Supports both PC Monitor and HDTV display by Front Panel Switch
-- DVI Specification 1.0 Compliant
-- Supports HDCP compliant device
-- Compatible with DVI Standard by DDWG
-- The use of standard DVI-D Plug
-- Support 480i, 480p, 720i, 720p, and 1080i resolution for HDTV
-- Supports up to WUXGA (1920 x 1200) resolution for Monitor
-- Connects two or more digital display at the same time from the same digital video source
-- Waiting Mode for Low Power (50mW)
2.1Package Contents
Before you start the installation of the Extender/Splitter, please check the package contents.
1
SPLIT-DVI-2
X1
2
Power Adapter (+5VDC)
X1
4
User’s Manual
X1
www.avenview.com
Page
3
2.2 Before Installation
•• Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
•• Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
•• Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
•• Do not twist or pull by force ends of the Video cable. It can cause malfunction.
www.avenview.com
Page
4
www.avenview.com
Page
5
2.3Panel Description
2.3.1 Front Panel
1
2
2.3.2 Rear Panel
3
4
5
1. Power LED
2. Mode Selector
3. DVI In
4. DVI Out - 1
5. DVI Out - 2
6. Power In
6
3.Installation
The installation of SPLIT-DVI-2 is simple:
1. Power off display source such as DVD Player, Set-top box
2. Connect the DVI cable into each display source and display
3. Connect DVI cable which is attached to display source into SPLIT-DVI-2
4. Connect Power to SPLIT-DVI-2
5. For HDTV Signal select HDTV from Function Switch and for PC Signal select PC
www.avenview.com
Page
6
4.Specifications
Item
UNITS
UNIT DESCRIPTION
Description
SPLIT-DVI-2
2 Port DVI Splitter
DVI VERSION
1.0
HDCP COMPLIANCE
1.1
INPUT/OUTPUT SIGNAL
CLOCK FREQUENCY
SUPPORTED RESOLUTION
& DISTANCE
DVI CONNECTOR
DIMENSIONS (L X W X H)
TMDS
25MHz – 225 MHz
Up to WUXGA 1920 x 1200 (PC)
Up to Full HD 1920 x1080p (HDTV)
29 pin DVI-D Plug
6.9” x 3.7” x 1”
POWER SUPPLY
5V 2A DC
POWER CONSUMPTION
3W (max)
WEIGHT
1lb
ENVIRONMENTAL
OPERATING TEMPERATURE
STORAGE TEMPERATURE
RELATIVE HUMIDITY
32˚ ~ 104˚F (0˚ to 40˚C)
-4˚ ~ 140˚F (-20˚ ~ 60˚C)
20~90% RH (no condensation)
www.avenview.com
Page
7
5.
Supported Resolutions
SUPPORTED RESOLUTIONS
480P
SD
720x480
59.94Hz, 60Hz
576P
EDTV
720x576
50Hz
720P
HD
1280x720
29.3Hz, 30Hz, 50Hz, 59.94Hz, 60Hz
1080i
FULL HD
1920x1080
25Hz, 29Hz, 30Hz
1080P
FULL HD
1920x1080
29.94Hz, 30Hz, 50Hz, 59.94Hz, 60Hz
VGA
PC
640X480
60Hz, 72Hz, 75Hz, 80Hz
SVGA
PC
800X600
56Hz, 60Hz, 72Hz, 75Hz, 85Hz
XGA
PC
1024x768
60Hz, 70Hz, 75Hz, 85Hz
XGA+
PC
1152x864
75Hz
SXGA
PC
1280X1024
60Hz, 75Hz, 85Hz
UXGA
PC
1600X1200
60Hz
SXGA+
PC
1400x900
59.94Hz, 60Hz
WSXGA+
PC
1680X1050
60Hz
WUXGA(RD)
PC
1920X1200
59.61Hz
www.avenview.com
Page
8
6.
Connector pin assignments
6.1 TRANSMITTER (OUTPUT)
PIN
SIGNAL
ASSIGNMENT
PIN
SIGNAL
ASSIGNMENT
PIN
SIGNAL
ASSIGNMENT
1
T.M.D.S. Data2-
9
T.M.D.S. Data1-
17
T.M.D.S. Data0-
2
T.M.D.S. Data2+
10
T.M.D.S. Data1+
18
T.M.D.S. Data0+
3
T.M.D.S. Data2 Shield
11
T.M.D.S. Data1 Shield
19
T.M.D.S. Data0 Shield
4
No Connect
12
No Connect
20
No Connect
5
No Connect
13
No Connect
21
No Connect
6
No Connect
14
+5V Power
22
T.M.D.S. Clock Shield
7
No Connect
15
Ground for+5V
23
T.M.D.S. Clock+
8
No Connect
16
No Connect
24
T.M.D.S. Clock-
6.2 RECEIVER (INPUT)
PIN
SIGNAL
ASSIGNMENT
PIN
SIGNAL
ASSIGNMENT
PIN
SIGNAL
ASSIGNMENT
1
T.M.D.S. Data2-
9
T.M.D.S. Data1-
17
T.M.D.S. Data0-
2
T.M.D.S. Data2+
10
T.M.D.S. Data1+
18
T.M.D.S. Data0+
3
T.M.D.S. Data2 Shield
11
T.M.D.S. Data1 Shield
19
T.M.D.S. Data0 Shield
4
No Connect
12
No Connect
20
Ground
5
No Connect
13
No Connect
21
No Connect
6
DDC Clock (SCL)
14
No Connect
22
T.M.D.S. Clock Shield
7
DDC Data (SDA)
15
Ground
23
T.M.D.S. Clock+
8
No Connect
16
Hot Plug Detect
24
T.M.D.S. Clock-
www.avenview.com
Page
9
7.
General Troubleshooting
Problem
Possible Solutions
•• Check if connection to the computer and the monitor are correct.
No Image
•• Check if the connection to the HD source and the monitor is seated
properly
•• Make sure the PC switch is on the correct selection for PC resolution
•• Make sure the HDTV switch is on the correct selection for HDTV
resolution
Screen Defects Appear
•• This product supports up to 1080P (1920x1080) and up to Wuxga
(1920x1200) resolutions
•• Check the all DVI cables are seated properly
•• Check the maximum resolution of the Source and Displays.
www.avenview.com
Page
10
Notes
www.avenview.com
Page
11
Avenview Warranty Certificate
AVENVIEW CORP. (“Avenview”) warrants Avenview-branded product(s) contained in the original packaging against defects in materials and workmanship when used
normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period. Avenview’s
published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications.
LABOR: During the Warranty Period of THREE (3) YEARS, Avenview will repair or replace the product(s) at no cost using new or used parts equivalent to novel performance
and reliability if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Labor applicable to product(s) after Warranty Period. For labor costs,
please contact support@avenview.com.
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if
the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact
support@avenview.com.
To obtain Warranty: (a) proof of purchase in the form of a bill of sale or receipted invoice reflecting that the registered product(s) is within warranty period must be presented
to obtain warranty service; (b) product(s) must be registered at time of purchase. Failure to do so will result in applicable parts and labor charges. Returning product(s) must
be shipped in Avenview’s original packaging or in packaging pertaining equal degree of protection to Avenview’s. Both Avenview and purchaser are responsible for freight
charges and brokerages when shipping the product(s) to the receiver.
NOT COVERED BY THIS WARRANTY
This warranty does not apply to any non-Avenview branded product(s); non-registered Avenview product(s). This warranty does not apply: (a) to cosmetic damage, including
but not limited to scratches, dents and broken cords; (b) to damage caused by use with another product; (c) to damage caused by accident, abuse, misuse, liquid contact, fire,
earthquake or other external cause; (d) to damage caused by operating the Avenview product(s) outside Avenview’s manuals or guidelines; (e) to damage caused by service
performed by anyone who is not a representative of Avenview or an Avenview authorized personnel; (f) to defects caused by normal wear and tear or otherwise due to the
normal aging of the Avenview product(s), or (g) if any serial number has been removed or defaced from the Avenview product(s).
AVENVIEW IS NOT LIABLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR
CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR
ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS;
LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT
OR CONSEQUENTIAL LOSS OR DAMAGE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
Some states do not allow the inclusion or limitation of incidental or consequential damages, or allow limitations on duration implements of the Warranty Period; therefore the above limitations or
exclusions may not be applicable to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
275 Woodward Avenue, Kenmore, NY 14217
1.866.508.0269
www.avenview.com
AV Connectivity, Distribution And Beyond...
TECHNICAL SUPPORT
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of
Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this
documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages
in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design.
With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but
not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement.